Voltage Detector ICs Low Voltage Standard CMOS Voltage Detector ICs BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series No.11006EDT01 ●Description ROHM standard CMOS reset IC series is a high-accuracy low current consumption reset IC series. The lineup was established with two output types (Nch open drain and CMOS output) and detection voltage range from 0.9V to 4.8V in increments of 0.1V, so that the series may be selected according to the application at hand. ●Features 1) Detection voltage from 0.9V to 4.8V in 0.1V increments 2) Highly accurate detection voltage: ±1.0% 3) Ultra-low current consumption 4) Nch open drain output (BU48□□G/F/FVE)and CMOS output (BU49□□G/F/FVE) 5) Small surface package SSOP5: BU48□□G, BU49□□G SOP4: BU48□□F, BU49□□F VSOF5: BU48□□FVE, BU49□□FVE ●Applications All electronics devices that use microcontrollers and logic circuits. ●Selection Guide No. Part Number : BU4 1 2 3 Specifications Description ① Output Circuit Format 8:Open Drain Output, 9:CMOS Output ② Detection Voltage Example VDET: Represented as 0.1V steps in the range from 0.9V to 4.8V (Displayed as 0.9 in the case of 0.9V) ③ Package G:SSOP5(SMP5C2)/ F :SOP4/ FVE:VSOF5(EMP5) ●Lineup Making Detection voltage Part Number Making Detection voltage JR JQ JP JN JM JL JK JJ JH JG JF JE JD JO JB JA HZ HY HX HW 4.8V 4.7V 4.6V 4.5V 4.4V 4.3V 4.2V 4.1V 4.0V 3.9V 3.8V 3.7V 3.6V 3.5V 3.4V 3.3V 3.2V 3.1V 3.0V 2.9V BU4848 BU4847 BU4846 BU4845 BU4844 BU4843 BU4842 BU4841 BU4840 BU4839 BU4838 BU4837 BU4836 BU4835 BU4834 BU4833 BU4832 BU4831 BU4830 BU4829 HV HU HT HS HR HQ HP HN HM HL HK HJ HH HG HF HE HD HC HB HA 2.8V 2.7V 2.6V 2.5V 2.4V 2.3V 2.2V 2.1V 2.0V 1.9V 1.8V 1.7V 1.6V 1.5V 1.4V 1.3V 1.2V 1.1V 1.0V 0.9V www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. Part Number BU4828 BU4827 BU4826 BU4825 BU4824 BU4823 BU4822 BU4821 BU4820 BU4819 BU4818 BU4817 BU4816 BU4815 BU4814 BU4813 BU4812 BU4811 BU4810 BU4809 1/8 Making Detection voltage Part Number Making Detection voltage Part Number LH LG LF LE LD LC LB LA KZ KY KX KW KV KU KT KS KR KQ KP KN 4.8V 4.7V 4.6V 4.5V 4.4V 4.3V 4.2V 4.1V 4.0V 3.9V 3.8V 3.7V 3.6V 3.5V 3.4V 3.3V 3.2V 3.1V 3.0V 2.9V BU4948 BU4947 BU4946 BU4945 BU4944 BU4943 BU4942 BU4941 BU4940 BU4939 BU4938 BU4937 BU4936 BU4935 BU4934 BU4933 BU4932 BU4931 BU4930 BU4929 KM KL KK KJ KH KG KF KE KD KC KB KA JZ JY JX JW JV JU JT JS 2.8V 2.7V 2.6V 2.5V 2.4V 2.3V 2.2V 2.1V 2.0V 1.9V 1.8V 1.7V 1.6V 1.5V 1.4V 1.3V 1.2V 1.1V 1.0V 0.9V BU4928 BU4927 BU4926 BU4925 BU4924 BU4923 BU4922 BU4921 BU4920 BU4919 BU4918 BU4917 BU4916 BU4915 BU4914 BU4913 BU4912 BU4911 BU4910 BU4909 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series ●Absolute maximum ratings (Ta=25℃) Parameter Power Supply Voltage Nch Open Drain Output Output Voltage CMOS Output *1*4 SSOP5 Power *2*4 SOP4 Dissipation *3*4 VSOF5 Operating Temperature Ambient Storage Temperature *1 *2 *3 *4 Technical Note Symbol VDD-GND VOUT Pd Topr Tstg Limits -0.3 ~ +7 GND-0.3 ~ +7 GND-0.3 ~ VDD+0.3 540 400 210 -40 ~ +125 -55 ~ +125 Unit V V mW ℃ ℃ When used at temperatures higher than Ta=25℃, the power is reduced by 5.4mW per 1℃ above 25℃. When used at temperatures higher than Ta=25℃, the power is reduced by 4.0mW per 1℃ above 25℃. When used at temperatures higher than Ta=25℃, the power is reduced by 2.1mW per 1℃ above 25℃. When a ROHM standard circuit board (70mm×70mm×1.6mm, glass epoxy board)is mounted. ●Electrical characteristics Parameter Detection Voltage Detection Voltage Temperature Coefficient Hysteresis Voltage *1 * Symbol VDET Condition VDD=HL , Ta=25℃ RL=470kΩ VDET/∆T Ta=-40℃~125℃ ∆VDET BU4848 BU4847 BU4846 BU4845 BU4844 BU4843 BU4842 BU4841 BU4840 BU4839 BU4838 BU4837 BU4836 BU4835 BU4834 BU4833 BU4832 BU4831 BU4830 BU4829 BU4828 BU4827 BU4826 BU4825 BU4824 BU4823 BU4822 BU4821 BU4820 BU4819 BU4818 BU4817 BU4816 BU4815 BU4814 BU4813 BU4812 BU4811 BU4810 BU4809 *1 VDD=LHL Ta=-40℃~125℃ RL=470kΩ VDET≤1.0V VDET≥1.1V Min. 4.752 4.653 4.554 4.455 4.356 4.257 4.158 4.059 3.960 3.861 3.762 3.663 3.564 3.465 3.366 3.267 3.168 3.069 2.970 2.871 2.772 2.673 2.574 2.475 2.376 2.277 2.178 2.079 1.980 1.881 1.782 1.683 1.584 1.485 1.386 1.287 1.188 1.089 0.990 0.891 Limit Typ. 4.800 4.700 4.600 4.500 4.400 4.300 4.200 4.100 4.000 3.900 3.800 3.700 3.600 3.500 3.400 3.300 3.200 3.100 3.000 2.900 2.800 2.700 2.600 2.500 2.400 2.300 2.200 2.100 2.000 1.900 1.800 1.700 1.600 1.500 1.400 1.300 1.200 1.100 1.000 0.900 Max. 4.848 4.747 4.646 4.545 4.444 4.343 4.242 4.141 4.040 3.939 3.838 3.737 3.636 3.535 3.434 3.333 3.232 3.131 3.030 2.929 2.828 2.727 2.626 2.525 2.424 2.323 2.222 2.121 2.020 1.919 1.818 1.717 1.616 1.515 1.414 1.313 1.212 1.111 1.010 0.909 - ±30 - ppm/℃ VDET ×0.03 VDET ×0.03 VDET ×0.05 VDET ×0.05 VDET ×0.08 VDET ×0.07 V Unit V Designed Guarantee.(Outgoing inspection is not done on all products.) This product is not designed for protection against radioactive rays. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 2/8 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Electrical characteristics (Unless Otherwise Specified Ta=-25 to 125℃) Parameter Symbol Circuit Current when ON IDD1 Circuit Current when OFF IDD2 Operating Voltage Range VOPL ‘Low’ Output Current (Nch) IOL ‘High’ Output Current (Pch) (only BU49□□G/F/FVE) IOH Output Leak Current when OFF (only BU48□□G/F/FVE) Ileak Condition VDET =0.9-1.3V VDET =1.4-2.1V VDET =2.2-2.7V VDD=VDET-0.2V VDET =2.8-3.3V VDET =3.4-4.2V VDET =4.3-4.8V VDET =0.9-1.3V VDET =1.4-2.1V VDET =2.2-2.7V VDD=VDET+2.0V VDET =2.8-3.3V VDET =3.4-4.2V VDET =4.3-4.8V VOL≤0.4V, Ta=25~125℃, RL=470kΩ VOL≤0.4V, Ta=-40~25℃, RL=470kΩ VDS=0.05V VDD=0.85V VDS=0.5V VDD=1.5V VDET=1.7-4.8V VDS=0.5V VDD=2.4V VDET=2.7-4.8V VDS=0.5V VDD=4.8V VDET=0.9-3.9V VDS=0.5V VDD=6.0V VDET=4.0-4.8V VDD=VDS=7V Ta=-40℃~85℃ VDD=VDS=7V Ta=85℃~125℃ Min. 0.70 0.90 20 1.0 3.6 1.7 2.0 Limit Typ. 0.15 0.20 0.25 0.30 0.35 0.40 0.30 0.35 0.40 0.45 0.50 0.55 100 3.3 6.5 3.4 4.0 Max. 0.88 1.05 1.23 1.40 1.58 1.75 1.40 1.58 1.75 1.93 2.10 2.28 - - 0 0.1 - 0 1 Unit µA µA V µA mA mA µA * This product is not designed for protection against radioactive rays. ●Block Diagrams BU48□□G/F/FVE BU49□□G/F/FVE VDD VDD VOUT VOUT Vref Vref GND GND Fig.1 Fig.2 TOP VIEW SSOP5 PIN No. Symbol 1 VOUT TOP VIEW TOP VIEW SOP4 Function PIN No. Symbol Reset output 1 VOUT VSOF5 Function PIN No. Symbol Reset output 1 VOUT Function Reset output 2 VDD Power supply voltage 2 VDD Power supply voltage 2 SUB Substrate* 3 GND GND 3 N.C. Unconnected terminal 3 N.C. Unconnected terminal 4 N.C. Unconnected terminal 4 GND GND 4 VDD Power supply voltage 5 N.C. Unconnected terminal 5 GND GND *Connect the substrate to VDD www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 3/8 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Reference Data (Unless specified otherwise, Ta=25℃) 0.5 0.4 0.3 0.2 0.1 0.0 0 1 2 3 4 5 6 7 4 3 VDD =6.0V 15 2 1 0 0.0 0.5 1.0 1.5 VDD =4.8V 10 VDD =1.2V 2.0 5 0 2.5 0 1 2 3 4 5 6 DRAIN-SOURCE VOLTAGE ： VDS[V] Fig.3 Circuit Current Fig.4 “LOW” Output Current Fig.5 “High” Output Current 1.0 3 2 1 0 1 2 3 4 5 6 0.6 0.4 0.2 0.0 0.0 7 VDD SUPPLY VOLTAGE ：VDD [V] 0.4 0.3 0.2 0.1 0.0 -40 0 40 80 120 TEMPERATURE ： Ta[℃] Fig.9 Circuit Current when ON www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 1.5 2.0 High to low(VDET) 【BU4816F】 2.5 40 80 120 Fig.8 Detecting Voltage Release Voltage 1.0 1.0 【BU4816F】 0.8 0.6 0.4 0.2 0.0 -40 0 TEMPERATURE ： Ta[℃] Fig.7 Operating Limit Voltage CIRCUIT CURRENT WHEN OFF ： IDD2 [μA] 【BU4816F】 1.0 1.5 VDD SUPPLY VOLTAGE ： VDD [V] Fig.6 I/O Characteristics 0.5 0.5 Low to high(VDET+ΔVDET) 1.0 -40 ： V OPL [V] 4 0.8 MINIMUM OPERATING VOLTAGE 5 2.0 【BU4816F】 DETECTION VOLTAGE： VDET[V] 【BU4816F】 0 CIRCUIT CURRENT WHEN ON ： IDD1 [μA] 【BU4916F】 20 DRAIN-SOURCE VOLTAGE ： VDS[V] OUTPUT VOLTAGE： VOUT [V] OUTPUT VOLTAGE： VOUT [V] 25 【BU4816F】 VDD SUPPLY VOLTAGE ：VDD [V] 7 6 5 ： 【BU4816F】 "HIGH" OUTPUT CURRENT I OH [mA] "LOW" OUTPUT CURRENT ： IOL [mA] CIRCUIT CURRENT ： IDD [μA] 0.6 0 40 80 120 TEMPERATURE ： Ta[℃] Fig.10 Circuit Current when OFF 4/8 【BU4816F】 0.8 0.6 0.4 0.2 0.0 -40 0 40 80 120 TEMPERATURE ： Ta[℃] Fig.11 Operating Limit Voltage 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Reference Data Examples of Output rising value(TPLH)and Output falling value(TPHL) Part Number TPLH[µs] TPHL[µs] BU4845G/F/FVE 23.3 275.9 BU4945G/F/FVE 3.5 354.3 VDD=4.3V5.1V VDD=5.1V4.3V * This data is for reference only. This figure will vary with the application, so please confirm actual operation conditions before use. ●Explanation of Operation For both the open drain type(Fig.12)and the CMOS output type(Fig.13), the detection and release voltages are used as threshold voltages. When the voltage applied to the VDD pins reaches the applicable threshold voltage, the Vout terminal voltage switches from either “High” to “Low” or from “Low” to “High”. Because the BU48□□G/F/FVE series uses an open drain output type, it is possible to connect a pull-up resistor to VDD or another power supply [The output “High” voltage (VOUT) in this case becomes VDD or the voltage of the other power supply]. VDD VDD VDD R1 R1 RL Vref Q2 Vref RESET R2 R2 VOUT VOUT Q1 R3 R3 RESET Q1 GND GND Fig.12 (BU48□□ type internal block diagram) Fig.13 (BU49□□ type internal block diagram) ●Timing Waveforms Example:The following shows the relationship between the input voltage VDD, the CT Terminal Voltage VCT and the output voltage VOUT when the input power supply voltage VDD is made to sweep up and sweep down (The circuits are those in Fig.12 and 13). ①When the power supply is turned on, the output is unsettled from after over the operating limit voltage (VOPL) until TPHL. Therefore it is possible that the reset signal is not outputted VDD when the rise time of VDD is faster than TPHL. VDET+ΔVDET ⑤ ②When VDD is greater than VOPL but less than the reset release DET V voltage (VDET + VDET), output (VOUT) voltages will switch to L. VOPL ③If VDD exceeds the reset release voltage (VDET + VDET), then 0V VOUT switches from L to H (with a delay of TPLH). ④If VDD drops below the detection voltage (VDET) when the VOUT power supply is powered down or when there is a power VOH supply fluctuation, VOUT switches to L (with a delay of TPHL). TPLH TPHL TPLH ⑤The potential deference between the detection voltage and the TPHL release voltage is known as the hysteresis width (VDET). The VOL system is designed such that the output does not flip-flop with power supply fluctuations within this hysteresis width, ① ③ ④ ② preventing malfunctions due to noise. Fig.14 www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 5/8 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Circuit Applications 1) Examples of a common power supply detection reset circuit VDD1 VDD2 Application examples of BU48□□G/F/FVE series (Open Drain output type) and BU49□□G/F/FVE series (CMOS output type) are shown below. RL Microcontroller RST BU48□□□ CIN CL (Capac it or for noise filtering) Fig.15 Open collector Output type V DD1 CASE1:The power supply of the microcontroller (VDD2) differs from the power supply of the reset detection (VDD1). Use the Open Drain Output Type (BU48□□G/FVE) attached a load resistance (RL) between the output and V DD2. (As shown Fig.15) GND CASE2:The power supply of the microcontroller (VDD1) is same as the power supply of the reset detection (VDD1). Use CMOS output type (BU43□□G/FVE) or Open Drain Output Type (BU48□□G/FVE) attached a load resistance (RL) between the output and VDD1. Microcontroller (As shown Fig.16) BU49□□□ RST When a capacitance CL for noise filtering or setting the output delay time is connected to the Vout pin (the reset signal input terminal of the microcontroller), please take into account the waveform of the rise and fall of the output voltage (Vout). C IN CL (Capacitor for nois e filtering) GND Fig.16 CMOS Output type 2) Examples of the power supply with resistor dividers In applications where the power supply input terminal (VDD) of an IC with resistor dividers, it is possible that a through-current will momentarily flow into the circuit when the output logic switches, resulting in malfunctions (such as output oscillatory state).(Through-current is a current that momentarily flows from the power supply (VDD) to ground (GND) when the output level switches from “High” to “Low” or vice versa.) Consider the use of BD48□□ when the power supply input it with resistor dividers. V1 R2 I1 R1 VDD CIN BU48□□ BU49□□ VOUT CL GND Fig.17 www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 6/8 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Notes for use 1. Absolute maximum range Absolute Maximum Ratings are those values beyond which the life of a device may be destroyed. We cannot be defined the failure mode, such as short mode or open mode. Therefore a physical security countermeasure, like fuse, is to be given when a specific mode to be beyond absolute maximum ratings is considered. 2. GND potential GND terminal should be a lowest voltage potential every state. Please make sure all pins that are over ground even if include transient feature. 3 Electrical Characteristics Be sure to check the electrical characteristics that are one the tentative specification will be changed by temperature, supply voltage, and external circuit. 4. Bypass Capacitor for Noise Rejection Please put into the to reject noise between VDD pin and GND with 1uF over and between VOUT pin and GND with 1000pF. If extremely big capacitor is used, transient response might be late. Please confirm sufficiently for the point. 5. Short Circuit between Terminal and Soldering Don’t short-circuit between Output pin and VDD pin, Output pin and GND pin, or VDD pin and GND pin. When soldering the IC on circuit board please is unusually cautious about the orientation and the position of the IC. When the orientation is mistaken the IC may be destroyed. 6. Electromagnetic Field Mal-function may happen when the device is used in the strong electromagnetic field. 7. The Vdd line inpedance might cause oscillation because of the detection current. 8. A Vdd -GND capacitor (as close connection as possible) should be used in high Vdd line impedance condition. 9. Lower than the mininum input voltage makes the Vout high impedance, and it must be Vdd in pull up (Vdd) condition. 10. Recommended value of RL Resistar is over 10kΩ (VDET=1.5V~4.8V), over 100kΩ (VDET=0.9~1.4V). 11. This IC has extremely high impedance terminals. Small leak current due to the uncleanness of PCB surface might cause unexpected operations. Application values in these conditions should be selected carefully. If 10MΩ leakage is assumed between the CT terminal and the GND terminal, 1MΩ connection between the CT terminal and the Vdd terminal would be recommended. Also, if the leakage is assumed between the Vout terminal and the GND terminal, the pull up resistor should be less than 1/10 of the assumed leak resistance. 12. External parameters For Rl, the recommended range is 10kΩ~1MΩ. There are many factors (board layout, etc) that can affect characteristics. Please verify and confirm using practical applications. 13. Power on reset operation Please note that the power on reset output varies with the Vcc rise up time. Please verify the actual operation. 14. Precautions for board inspection Connecting low-impedance capacitors to run inspections with the board may produce stress on the IC. Therefore, be certain to use proper discharge procedure before each process of the test operation.To prevent electrostatic accumulation and discharge in the assembly process, thoroughly ground yourself and any equipment that could sustain ESD damage, and continue observing ESD-prevention procedures in all handing, transfer and storage operations. Before attempting to connect components to the test setup, make certain that the power supply is OFF. Likewise, be sure the power supply is OFF before removing any component connected to the test setup. 15. When the power supply, is turned on because of incertain cases, momentary Rash-current flow into the IC at the logic unsettled, the couple capacitance, GND pattern of width and leading line must be considered. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 7/8 2011.03 - Rev.D BU48□□G Series, BU48□□F Series, BU48□□FVE Series, BU49□□G Series, BU49□□F Series, BU49□□FVE Series Technical Note ●Ordering part number B U 4 8 0 BU48: Standard CMOS reset IC Open drain type BU49: Standard CMOS reset IC CMOS Output type 9 F Detection voltage 09 : 0.9V (0.1V step) 48 : 4.8V － Package G: SSOP5 F: SOP4 FVE: VSOF5 T R Packaging and forming specification TR: Embossed tape and reel SSOP5 5 4 1 2 0.2Min. +0.2 1.6 −0.1 2.8±0.2 <Tape and Reel information> +6° 4° −4° 2.9±0.2 3 Tape Embossed carrier tape Quantity 3000pcs Direction of feed TR The direction is the 1pin of product is at the upper right when you hold ( reel on the left hand and you pull out the tape on the right hand 1pin +0.05 0.13 −0.03 +0.05 0.42 −0.04 0.05±0.05 1.1±0.05 1.25Max. ) 0.95 0.1 Direction of feed Reel (Unit : mm) ∗ Order quantity needs to be multiple of the minimum quantity. SOP4 <Tape and Reel information> +0.2 1.25 –0.1 2.0±0.2 +6° 4° –4° 1.3 3 2.1±0.2 0.27±0.15 4 1.05Max. 0.9±0.05 1 Tape Embossed carrier tape Quantity 3000pcs Direction of feed TR The direction is the 1pin of product is at the upper right when you hold ( reel on the left hand and you pull out the tape on the right hand ) 2 0.05 +0.05 0.13 –0.03 1pin S 0.05±0.05 +0.05 0.42 –0.04 0.1 S +0.05 0.32 –0.04 Direction of feed Reel (Unit : mm) ∗ Order quantity needs to be multiple of the minimum quantity. VSOF5 <Tape and Reel information> 1.2 ± 0.05 1.6 ± 0.05 4 (MAX 1.28 include BURR) 5 0.2MAX 1.6±0.05 1.0±0.05 Tape Embossed carrier tape Quantity 3000pcs Direction of feed TR The direction is the 1pin of product is at the upper right when you hold ( reel on the left hand and you pull out the tape on the right hand ) 1pin 1 2 3 0.6MAX 0.13±0.05 0.5 Direction of feed 0.22±0.05 Reel (Unit : mm) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 8/8 ∗ Order quantity needs to be multiple of the minimum quantity. 2011.03 - Rev.D Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A