TO ORDER CALL TEL: (630) 628-9999 FAX:(630) 628-9922 TOLL FREE: (888) 797-8652 EMAIL: [email protected] 300 W Factory Road Addison, IL 60101 RoHS StepperPower™ The Power Supply for Stepping Motors Series: BVU6000 & PV5000 ● Fully compatible with Pacific Scientific (and other) stepping motor drivers series 5200, 5300, 5400, 6400. ● Space saving compact modules provide mounting studs for motor drivers. ● Integral motor and logic-power (where applicable). ● Models to drive one or two motors. ● 120VAC or 240VAC models; input taps to match actual line voltages. ● Custom units available. ● Safety Agency Approvals BVU Series: − UL 1950, third edition, File #E181899. − CSA, C22.2 No.950, File #E181899. − CE Marked. StepperPower™ Space saving compact power module provides The StepperPower™, Series PV5000 and BVU6000, is an mounting studs for motor drivers integral power supply module especially designed to The StepperPower™ modules, series PV5000 and operate stepper motors. Motor and logic power supplies are BVU6000, feature a transformer with high efficiency and both incorporated in one package (when applicable). excellent regulation that assures a compact physical size. Models are available to drive one or two motors. The single They are assembled on space saving L- or U-shaped driver modules are assembled on L-shaped chassis with chassis.PEM nuts for mounting the driver modules are threaded (# 6-32) PEM nuts to mount motor driver. The dual provided on one side of the L-bracket and on the both side driver module feature a U-shaped chassis with threaded of the U-chassis. Once the drivers are mounted on the (#6-32) PEM nuts on both side to mount two motor drivers. power module, they become fully self-contained units This makes it an integral space saving unit eliminating the without any need of external components. The outputs are need for installing and wiring different pieces. lead wires that can be wired directly to the screw terminal connector available on the driver modules. This simplifies Integral motor and logic power supplies the installation and saves wiring time. The motor and logic power supplies required to operate the stepping motors and associated control logic are both Input taps to match actual line voltages incorporated in one unit. This eliminates the need to install As the motor power is unregulated, it tends to vary with and wire two different power supplies to separately the input line voltage. For example, if a high line is mounted driver modules. The motor power is unregulated applied at the 120VAC tap, the motor output voltage may DC voltage; while the logic power is a fully regulated DC exceed the safe operating limit of the driver and cause output that is maintained within tight regulation (± 0.25V) damage. The taps are provided so that in high line over a large range of input AC voltage. locations, the output voltage can be kept within the safe operating limit by using the corresponding tap. The logic Models to drive one or two motors power is regulated and is not affected by the input line The single motor drives are commonly used. However, in a voltage over a wide range (95VAC to 135VAC when multi axis-control application, the dual driver models are a connected to 120VAC tap). very cost effective and space saving alternative. In the single as well as dual driver modules, the voltage and current Custom designs to match other applications ratings are provided to allow maximum motor torque without PowerVolt will design any other custom units to match exceeding the safe operating voltage and current limits. your application. Please call or e-mail us for quotes. When operating two drivers from one power supply, the effect of regenerative energy must be considered to assure safe operation of the drives. TO ORDER CALL Series: BVU6000 & PV5000 TEL: (630) 628-9999 FAX: (630) 628-9922 TOLL FREE: (888) 628-8658 EMAIL: [email protected] 300 W. Factory Road Addison, IL 60101 Motor Power Approximate Approximate Logic Power Regulated No Load (VDC) Under Load (VDC) (VDC) BVU75FU6401-1 70V 62V@5A None BVU75FU6402-1 BVU48FU6401-1 70V 57V 2 x 62V@ 5A 48V @ 5A None None rated load BVU48FU6402-1 BVU24FU6401-1 57V 29V 2 x 48V @ 5A 24V @ 5A None None Operating Temperature: 0°C to 50°C full rated load (derate 2% per °C to 70°C max.) BVU24FU6402-1 BVU80C5 29V 88V 2 x 24V @ 5A 80V @ 5A None None Storage Temperature: -25°C to 85°C BVU80D8 BVU130D5 88V 133V 80V @ 8A 122V @ 5A None None Humidity: 95% Non-condensing PV5201-1 PV5202-1 42V 42V 36V @ 2.5A 36V @ 5A 5V @ 250mA 5V @ 250mA Logic Power: ± 0.25V Regulation PV5301-1 PV5302-1 71V 71V 60V @ 2.5A 60V @ 5A 12V @ 250mA 12V @ 400mA PV5401-1 PV5402-1 72V 72V 65V @ 5A 60V @ 10A 12V @ 250mA 12V @ 400mA PV5000-M 71V 60V @ 1.75A 12V @ 250mA Specification : Model Input Power: 120V AC, 50/60Hz nominal; taps at 126V AC and 132V AC (optional 240V AC input with taps at 252V AC and 264V AC) Output Power: See table at the right Output Ripple: 3% r.m.s. maximum at nominal line full Suffix “-1” specifies 120VAC Input Suffix “-2” specifies 240 VAC Input