BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor Surface Mount Glass Passivated Junction Fast Switching Rectifier FEATURES • Superectifier structure for high reliability condition • Patented glass-plastic encapsulation technique • Ideal for automated placement • Fast switching for high efficiency • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ® ed* t n e Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AB TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM 30 A trr 150 ns, 250 ns, 500 ns VF 1.3 V TJ max. 175 °C MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER FAST SWITCHING TIME DEVICE: 1ST BAND IS RED SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 RGL41A RGL41B RGL41D RGL41G Polarity color bands (2nd band) Gray Red Orange Yellow BYM 11-600 RGL41J Green BYM 11-800 BYM 11-1000 UNIT RGL41K RGL41M Blue Violet Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TT = 55 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum full load reverse current, full cycle average at TA = 55 °C IR(AV) 50 µA TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88547 Revision: 11-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 BYM 11-600 BYM 11-800 BYM 11-1000 UNIT VF 1.3 V TA= 25 °C TA= 125 °C IR 5.0 50 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ Maximum DC reverse current at rated DC blocking voltage 150 250 500 15 ns pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM 11-50 BYM 11-100 BYM 11-400 BYM 11-600 BYM 11-800 BYM 11-1000 75 (1) 30 (2) RθJA RθJT Maximum thermal resistance BYM 11-200 UNIT °C/W Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) REFERRED PACKAGE CODE BASE QUANTITY RGL41J-E3/96 0.114 96 1500 7" diameter plastic tape and reel RGL41J-E3/97 0.114 97 5000 13" diameter plastic tape and reel BYM11-600-E3/96 0.114 96 1500 7" diameter plastic tape and reel BYM11-600-E3/97 0.114 97 5000 13" diameter plastic tape and reel (1) 0.114 96 1500 7" diameter plastic tape and reel RGL41JHE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel BYM11-600HE3/ 96 (1) 0.114 96 1500 7" diameter plastic tape and reel (1) 0.114 97 5000 13" diameter plastic tape and reel RGL41JHE3/96 BYM11-600HE3/97 DELIVERY MODE Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88547 Revision: 11-Apr-08 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Resistive or Inductive Load Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 1.25 1.00 0.75 0.50 0.25 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 25 50 75 100 125 150 175 0 20 40 60 80 100 Terminal Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics 100 30 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) Peak Forward Surge Current (A) 1 25 20 15 10 0 10 1 1 10 100 10 1 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 10 1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Mounted on 0.20 x 0.27" (5 x 7 mm) Copper Pad Areas 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance Document Number: 88547 Revision: 11-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends 1st Band Mounting Pad Layout 0 D2 = D1 +- 0.008 (0.20) 0.138 (3.5) MAX. D2 D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88547 Revision: 11-Apr-08 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1