BYM13-20—BYM13-60 1.0A Surface Mount Schottky Barrier Rectifier Features · · · · · · · MELF Schottky rectifier Ideal for automated placement Guardring for overvoltage protection Low power losses, high efficiency DO-213AB Low forward voltage drop High surge capability Meets MSL level 1, per J-STD-020, LF maximum SOLDERABLE ENDS 1st BAND 2cnd BAND peak of 250 °C D1= 0.105 0.095 (2.67) (2.41) D2 · Solder dip 260 °C, 40 s · Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 0.022 (0.56) 0.018 (0.46) Mechanical Data · Case: DO-213AB Epoxy meets UL 94V-0 flammability rating · Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test · Polarity: Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type Maximum Ratings and Electrical Characteristics PARAMETER 0 D2 = D1 + - 0.008 (0.20) 0.205 (5.2) 0.185(4.7) @ TA = 25°C unless otherwise specified SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 Denotes Schottky devices: 1st band is orange SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 Polarity color bands (2nd band) voltage type UNIT Gray Red Orange Yellow Green Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current (Fig. 1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Voltage rate of change (rated VR) dV/dt Operating junction temperature range Storage temperature range PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current at rated DC blocking voltage (1) Typical junction capacitance 10 000 TJ - 55 to + 125 - 55 to + 150 TSTG TEST CONDITIONS 1.0 A SYMBOL SGL41-20 4.0 V, 1.0 MHz SGL41-30 SGL41-40 0.50 °C °C BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 VF TA = 25 °C TA = 100 °C V/µs - 55 to + 150 SGL41-50 SGL41-60 0.70 UNIT V 0.5 IR CJ Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle 1 of 2 10 5.0 110 80 mA pF 30 1.0 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load P.C.B. Mounted on 0.24 x 0.24" (6.0 x 6.0 mm) Copper Land Areas 0.75 SGL41-20 to SGL41-40 0.50 SGL41-50 and SGL41-60 0.25 0 75 50 25 100 150 125 20 15 10 100 10 1 175 Terminal Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current 1000 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 25 5 0 TJ = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C 0.1 100 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 0.01 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1.6 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Instantaneous Reverse Current (mA) At Rated Td 8.3 ms Single Half Sine-Wave SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 10 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics 2 of 2 100