AZ696 10 AMP SUBMINIATURE POWER RELAY FEATURES • Miniature size: Form A version: 0.63" (16 mm) height, 1.10" (30 mm) length, 0.39" (10 mm) width • High sensitivity, 100 mW pickup • Dielectric strength 4000 Vrms • Isolation spacing greater than 8 mm • Approvals/Standards include: UL, CSA, VDE, IEC, SEMKO, CEE • 10 Amp switching capability • Epoxy sealed for automatic wave soldering and cleaning • UL file E44211; CSA file LR 85091 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) SPST (1 Form A) Ratings Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 380 VAC UL Rating: 10 A at 30 VDC resistive 10 A at 250 VAC general use 1/4 HP 120 VAC 1/2 HP 250 VAC B 300 pilot duty Q 300 pilot duty *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide Resistance < 30 milliohms initially (at rated current, voltage drop method) COIL Power At Pickup Voltage (typical) 100 mW Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Temperature Rise 20°C (36°F) at nominal coil voltage Temperature Max. 110°C (230°F) NOTES Life Expectancy Mechanical Electrical Minimum operations 10 million 1 X 105 at 10 A 240 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 110°C (230°F) Vibration 0.062" DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 14 grams 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 2/28/01W AZ696 RELAY ORDERING DATA COIL SPECIFICATIONS ORDER NUMBER Nominal Coil VDC 5 Max. Continuous VDC 12 Coil Resistance ± 10% 110 Must Operate VDC 3.5 1 Form A (SPST-NO) AZ696–1A–5DE 1 Form C (SPDT) AZ696–1C–5DE 6 14 160 4.2 AZ696–1A–6DE AZ696–1C–6DE 12 29 660 8.4 AZ696–1A–12DE AZ696–1C–12DE 24 54 2,200 16.8 AZ696–1A–24DE AZ696–1C–24DE 48 102 8,000 33.6 AZ696–1A–48DE AZ696–1C–48DE 1 form B available upon request. Please contact factory. INTERNATIONAL APPROVALS Germany VDE 0435/09.72 at 8 Amps VDE 0631/12.83 at 8 Amps VDE 0700/1/2.81 at 8 Amps MECHANICAL DATA Coil Temperature Rise ˚C Coil Temperature Rise 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 1.10 (28) .394 (10) 1.18 (30) .394 (10) .618 (15.7) .618 (15.7) .638 (16.2) 10A .138 (3.5) 0A 60% 80% .638 (16.2) 100% 120% 140% 160% 180% 200% 220% Percent of Nominal Coil Voltage at 20˚C .024 x .035 (0.6 x 0.9) .138 (3.5) .024 x .035 (0.6 x 0.9) .024 x .039 (0.6 x 1) WIRING DIAGRAM PC BOARD LAYOUT Maximum Switching Capacity .024 x .039 (0.6 x 1) .051 (1.3) 10.0 9.0 8.0 7.0 6.0 5.0 .299 (7.6.) DC Resistive Load 4.0 3.0 AC Resistive Load FORM A 1.0 2 .197 (5) .4 VOLTAGE 1000 400 500 600 700 800 900 300 200 100 50 60 70 80 90 40 30 20 .1 .748 (19) 2 Viewed toward terminals 3 5 .059 (1.5) .126 (3.2) FORM C 4 1 FORM C .3 .122 (3.1) 4 1 .299 (7.6.) .2 3 1 FORM A .051 (1.3) .9 .8 .7 .6 .5 10 CURRENT 2.0 .122 (3.1) 1 .059 (1.5) .748 (19) .126 (3.2) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 2/28/01W