New Product Release Surface Mount Ceramic Chip Capacitors Extended Values 1206, X7R Dielectric, 25, 50, 100, 200 Volts 25 Volts – 1.2µF - 1.5 µF 50 Volts – 0.27µF - 0.68µF 100 Volts – 0.27µF - 0.39µF 200 Volts – 27,000pF - 150,000pF Outline Drawings Table 1 - Dimensions - Millimeters EIA Metric Size Size Code Code (Ref) 1206* 3216 L# Length W# Width Thickness B Bandwidth S Min. Separation Mounting Technique 3.2 (.126) ± 0.2 (.008) 1.6 (.063) ± 0.2 (.008) See Table 2 0.5 (.02) ± .25 (.010) N/A Solder Wave or Solder Reflow Table 2 - Ratings & Part Number Listing Cap Values KEMET Part Number Capacitance Tolerance Thickness - mm Qty 7” Reel Qty 13” Reel 1.2µF C1206C125(1)3RAC J,K,M 1.60 ± 0.15 2,000 1.5µF C1206C155(1)3RAC J,K,M 1.60 ± 0.15 2,000 8,000 0.27µF C1206C274(1)5RAC* J,K,M .90 ± .10 4,000 10,000 0.33µF C1206C334(1)5RAC* J,K,M .90 ± .10 4,000 10,000 0.39µF C1206C394(1)5RAC* J,K,M .90 ± .10 4,000 10,000 0.47µF C1206C474(1)5RAC* J,K,M .90 ± .10 4,000 10,000 0.56µF C1206C564(1)5RAC* J,K,M .90 ± .10 4,000 10,000 0.68µF C1206C684(1)5RAC* J,K,M 1.00 ± 0.10 2,500 10,000 0.27µF C1206C274(1)1RAC J,K,M 1.25 ± 0.15 2,500 10,000 0.33µF C1206C334(1)1RAC J,K,M 1.60 ± 0.15 2,000 8,000 0.39µF C1206C394(1)1RAC J,K,M 1.60 ± 0.15 2,000 8,000 27,000pF C1206C273(1)2RAC J,K,M .78 ± .10 2,500 10,000 33,000pF C1206C333(1)2RAC J,K,M .78 ± .10 2,500 10,000 39,000pF C1206C393(1)2RAC J,K,M .78 ± .10 2,500 10,000 47,000pF C1206C473(1)2RAC J,K,M 1.00 ± 0.10 2,500 10,000 56,000pF C1206C563(1)2RAC J,K,M 1.00 ± 0.10 2,500 10,000 68,000pF C1206C683(1)2RAC J,K,M 1.00 ± 0.10 2,500 10,000 82,000pF C1206C823(1)2RAC J,K,M 1.00 ± 0.10 2,500 10,000 100,000pF C1206C104(1)2RAC J,K,M 1.25 ± 0.15 2,500 10,000 120,000pF C1206C124(1)2RAC J,K,M 1.25 ± 0.15 2,500 10,000 150,000pF C1206C154(1)2RAC J,K,M 1.60 ± 0.15 2,000 8,000 To complete the KEMET part number, insert capacitance tolerance: J - ±5%, K - ±10% or M ±20%. * X7R Dielectric - Extended Range Values - Cap and DF measured at 0.5 Vrms. F3274A 04/05 8,000 Electrical Parameters As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on room temperature (25°C) parameters: • Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range • Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or 100 gigohms, whichever is less. • Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms. 25 Volts - DF Limit is 3.5% > 25 Volts - DF Limit is 2.5% Soldering Process Wave soldering or reflow soldering is acceptable for these chips. Marking These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option. In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6682 • www.kemet.com