PRODUCT DATASHEET Minnie series Ordering number C12095 Description C12095_Minnie-M-MTG Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Minnie Reflector MT-G Metal 32.4 mm 14.75 mm Round PC Glue Ready FWHM Efficiency cd/lm Gerber File 26 degrees Available Able to use with Cree MT-G MR16 module. http://mtg.cree.com/ Ordering number C11862 Description C11862_Minnie-W-MTG Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Minnie Reflector MT-G Metal 32.4 mm 14.74 mm Round PC Glue Ready FWHM Efficiency cd/lm Gerber File 36 degrees Available Able to use with Cree MT-G MR16 module. http://mtg.cree.com/ Ordering number C12097 Description C12097_Minnie-WWW-MTG Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Minnie Reflector MT-G Metal 32.4 mm 14.75 mm Round PC Glue Ready FWHM Efficiency cd/lm Gerber File 74 degrees Available Able to use with Cree MT-G MR16 module. http://mtg.cree.com/ NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. October 6th 2011 22:48 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Minnie series GENERAL INFORMATION - Product series especially designed & optimized for MT-G series of LEDs. - Special care taken to make light distribution as uniform as possible. - Reflector is made of aluminium coated PC (120 degrees of Celcius / 248 degrees of Fahrenheit) with protective lacquer (110 degrees of Celcius / 230 degrees of Fahrenheit). - Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue options. http://www.ledil.com/datasheets/DataSheet_GLUES.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. October 6th 2011 22:48 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Minnie series C11862 C12095 C12097 October 6th 2011 22:48 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CA12240_Minnie-WWW-MTG-assy 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 Relative intensity of CA12239_Minnie-M-MTG-assy 100% 75% 50% 25% 0% 50 40 30 20 10 0 -10 -20 -30 -40 -50 Relative intensity of Minnie-W-MTG 100 % 75 % 50 % 25 % 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 Relative intensity of Minnie-W-MTG 100 % 75 % 50 % 25 % 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 Relative intensity of CA12239_Minnie-M-MTG-assy 100% 75% 50% 25% 0% 50 40 30 20 10 0 -10 -20 -30 -40 -50 Relative intensity of CA12240_Minnie-WWW-MTG-assy 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D 4 3 4 4 2. 12 .8 Top view 0.9 12.8 14.75 3 3 Front view 2 2 Material: PC Coating: metal coating with clear laquer 1 This drawing is our property. It can't be reproduced or communicated without our written agreement. DRAWN BY DATE CHECKED BY DATE DESIGNED BY DATE Led Teh FIN Fin DRAWING TITLE Datasheet Minnie MT-G reflector mav 18.02.2011 SIZE hh 18.02.2011 hh 01.01.2011 D DRAWING NUMBER REV 1 A4 SCALE 1:1 WEIGHT(g) SHEET A 1/1 1