OCXO C4530 Typical Applications Features Base Stations Test Equipment Synthesizers Digital Switching Previous Vectron Model Numbers Surface Mount Package Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package OCO1000, C4500 Frequency range 10 MHz – 160 MHz Standard frequencies 10; 12.8; 16.384; 19.2 ; 20; 26, 30.72, 38.4, 52 MHz Frequency stabilities1 [AT Cut Crystal – 10 MHz to 160MHz] Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Min -100 -250 -250 Min -500 -20 -10 -10 -300 -500 Typ Typ Max. +100 +250 +250 Max. +500 +20 +10 +10 +300 +500 3 Units ppb ppb ppb Units ppb ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 … +70°C D107 -20 … +70°C D257 F257 -40 … +85°C Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation ≤ 60MHz; after 30 days of operation >60MHz; after 30 days of operation to ± 100ppb of final frequency (1 hour reading) @ +25°C Frequency stabilities1 [SC Cut Crystal – 15 to 40 MHz] Parameter vs. operating temperature range (Referenced to +25°C) Min -25 -50 Typ Max. +25 +50 Units ppb ppb Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging /1 Year vs. aging / year (following Years) Warm-up Time Min -200 -5.0 -5.0 -1.0 -100 -80 Typ Max. +200 +5.0 +5.0 +1.0 +100 +80 3 Units ppb ppb ppb ppb ppb ppb minutes Units VDC Operating temp range -20 … +70°C -40 … +85°C Ordering Code D258 F508 Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation after 30 days of operation to ± 10ppb of final frequency (1 hour reading) @ +25°C Supply voltage (Vs) Parameter Supply voltage [Standard] Min 4.75 Typ 5 Max. 5.25 Supply voltage [Option] 3.135 3.3 3.465 VDC 2.5 1.0 Watts Watts Power consumption Condition Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Ordering Code SV050 SV033 during warm-up steady state @ +25°C v.2006-02-24 · page 1 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4530 RF output Parameter Signal [Standard] Load Signal Level (Vol) Min Signal Level (Voh) 3.7 2.4 45 Typ Max. Units Condition HCMOS 15 Ordering Code RFH 55 pF VDC VDC VDC VDC % +5.0 -30 Ω dBm dBc 50 Ohm load 50 Ohm load Max. ±2.5 ±8 5 Units ppm ppm Condition with SC Cut Crystal with AT Cut Crystal 2.0 1.4 4.0 2.8 VDC VDC with Vs=5.0VDC with Vs=3.3VDC Min 3.85 2.7 Typ 4.0 2.8 Max. 4.15 2.9 Units VDC VDC Condition with Vs=5.0VDC with Vs=3.3VDC Min Typ -75 -110 -135 -150 -150 -75 -105 -130 -155 -160 Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 0.5 0.3 Duty cycle Signal [Option] Load Output Power Harmonics Sinewave +0 50 +2.5 Min ±1.0 ±3.0 Typ ±1.75 ±5.0 with Vs=r 5.0V and 15pF load with Vs=3.3V and 15pF load with Vs= 5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 RFS Frequency Tuning (EFC) Parameter Tuning Range Linearity Tuning Slope % Positive Control Voltage Range 0.0 0.0 Reference Voltage Output (Vref) Parameter Reference Voltage Additional parameters Parameter 3 Phase Noise Phase Noise 3 Weight Processing & Packing 10 Handling & processing note 1 10 100 1 10 10 100 1 10 100 Condition Hz with 30.72 MHz Hz SC-Cut Hz HCMOS kHz kHz Hz with 110 MHz AT Cut Hz Sinewave kHz kHz kHz Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Output Load Operable temperature range Storage temperature range -55 -55 Typ Max. 7.0 7.0 50 +85 +125 Units V V pF °C °C Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition with Vs=5.0VDC with Vs=3.3VDC v.2006-02-24 · page 2 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4530 Enclosures Type A, for HCMOS output Type B, for Sinewave output, Type C, for HCMOS output only with reduced AT-stabilities available Package Codes: Code Height “H” Pin Length “L” Code Height “H” Pin Length “L” Code Height “H” Pin Length “L” A1 12.1 N/A B1 12.1 N/A C1 12.1 N/A A2 7.8 N/A B2 7.8 N/A C2 7.8 N/A Pin Connections Pin Connections Pin Connections 1 Electronic Frequency Control Input (EFC) 1 RF Output 1 Electronic Frequency Control Input (EFC) 2 Reference Voltage Output 2 N.C. 2 Reference Voltage Output 3 Supply Voltage Input (Vs) 3 Ground (Case) 3 Supply Voltage Input (Vs) 4 RF Output 4 N.C. 4 RF Output 5 Oven Alarm 5 Electronic Frequency Control Input (EFC) 5 Ground (Case) 6 I.C. Intern Connected 6 Supply voltage Vs oscillator 7 Ground (Case) 7 Supply voltage Vs heater *Pin 6 must be remain unconnected. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-02-24 · page 3 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4530 Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Type A1/A2 44 Quantity per meter 37.5 Quantity per reel 175 or 230 Dimension P 32 Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-02-24 · page 4 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4530 Recommended Reflow Profile tp Critical Zone Tp TL to Tp Ramp up TL Temperature Ramp dow n tL Ts Ts ts preheat 25 t 25°C to peak Time Pb-Free Assembly /Sn-Pb Assembly Profile Feature Pb-Free Assembly /Sn-Pb Assembly Profile Feature Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. Processing note: This FR 4 based SMD OCXO is a non-hermetic construction for use in No-Clean reflow processes and is 6/6 RoHS compliant. If you intend to wash this SMD OCXO, please contact your Sales representative to discuss the possibility. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-02-24 · page 5 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4530 How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code Frequency RFH A1 20.0MHz C4530 Example: Step 2 C4530 D207 SV050 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C4530 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C4530A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-02-24 · page 6 of 6 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax