Cree® EZ700™ Gen II LED Data Sheet CxxxEZ700-Sxx000-2 Cree’s EZBright™ LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials with Cree’s proprietary optical design and device technology to deliver superior value for high-intensity LEDs. The optical design maximizes light extraction efficiency and enables a Lambertian radiation pattern. Additionally, these LEDs are die attachable with conductive epoxy, solder paste or solder preforms, in addition to using the flux eutectic method. These vertically structured, low forward voltage LED chips are approximately 170 microns in height. Cree’s EZ™ chips are tested for conformity to optical and electrical specifications. These LEDs are useful in a broad range of applications, such as general illumination, automotive lighting and LCD backlighting. FEATURES APPLICATIONS • • EZBright Power Chip LED Rf Performance General Illumination − 240 mW min. - 450 & 460 nm – Aircraft − 200 mW min. - 470 nm – Decorative Lighting − 90 mW min. - 527 nm – Task Lighting • Lambertian Radiation – Outdoor Illumination • Conductive Epoxy, Solder Paste or Preforms, – Projection Lighting • or Flux Eutectic Attach • White LEDs Low Forward Voltage – 3.6 V Typical at 350 • Crosswalk Signals mA • Backlighting • Single Wire Bond Structure • Automotive • Dielectric Passivation Across Epi Surface CxxxEZ700-Sxx000-2 Chip Diagram .B CPR3DW Rev Data Sheet: Top View Die Cross Section Bottom View EZBright LED Chip 680 x 680 µm Backside Metallization Gold Bond Pad 150 x 150 µm Cathode (-) t = 170 µm Anode (+); 3 µm AuSn Dielectric Passivation Subject to change without notice. www.cree.com 1 Maximum Ratings at TA = 25°C Note 1 CxxxEZ700-Sxx000-2 DC Forward Current 750 mA Peak Forward Current 1000 mA LED Junction Temperature Note 3 145°C Reverse Voltage 5V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +120°C Typical Electrical/Optical Characteristics at TA = 25°C, If = 350 mA Part Number Forward Voltage (Vf, V) Note 2 Reverse Current [I(Vr=5 V), μA] Full Width Half Max (λD, nm) Min. Typ. Max. Max. Typ. C450EZ700-Sxx000-2 3.0 3.5 3.9 2 20 C460EZ700-Sxx000-2 3.0 3.5 3.9 2 21 C470EZ700-Sxx000-2 3.0 3.5 3.9 2 22 C527EZ700-Sxx000-2 3.1 3.5 4.0 2 35 Mechanical Specifications Description CxxxEZ700-Sxx000-2 Dimension Tolerance P-N Junction Area (μm) 650 x 650 ±35 Chip Area (μm) 680 x 680 ±35 170 ±25 150 x 150 ±25 Chip Thickness (μm) Top Au Bond Pad (μm) Au Bond Pad Thickness (μm) Back Contact Metal Area (μm) Back Contact Metal Thickness (μm) 3.0 ±1.5 680 x 680 ±35 3.0 ±1.5 Notes: 1. 2. 3. Maximum ratings are package-dependent. The above ratings were determined using a Au-plated TO39 header without an encapsulant for characterization. Ratings for other packages may differ. The junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds). See Cree EZBright Applications Note for assembly-process information. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 350 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average expected by the manufacturer in large quantities and are provided for information only. All measurements were made using a Au-plated TO39 header without an encapsulant. Optical characteristics measured in an integrating sphere using Illuminance E. This peak forward current specification is based on a 400-ms pulse width at a 1/5-duty cycle with a junction temperature of 65°C. Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright, EZ, and EZ700 are trademarks of Cree, Inc. 2 CPR3DW Rev. B Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Standard Bins for CxxxEZ700-Sxx000-2 LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from only one bin. Sorted die kit (CxxxEZ700-Sxx000-2) orders may be filled with any or all bins (CxxxEZ700-0xxx-2) contained in the kit. All radiant flux and all dominant wavelength values shown and specified are at If = 350 mA. Radiant flux values are measured using Au-plated TO39 headers without an encapsulant. Radiant Flux C450EZ700-S24000-2 C450EZ700-0313-2 C450EZ700-0314-2 C450EZ700-0315-2 C450EZ700-0316-2 C450EZ700-0309-2 C450EZ700-0310-2 C450EZ700-0311-2 C450EZ700-0312-2 C450EZ700-0305-2 C450EZ700-0306-2 C450EZ700-0307-2 C450EZ700-0308-2 310 mW 280 mW 240 mW 445 nm 447.5 nm 450 nm Dominant Wavelength 452.5 nm 455 nm Radiant Flux C460EZ700-S24000-2 C460EZ700-0313-2 C460EZ700-0314-2 C460EZ700-0315-2 C460EZ700-0316-2 C460EZ700-0309-2 C460EZ700-0310-2 C460EZ700-0311-2 C460EZ700-0312-2 C460EZ700-0305-2 C460EZ700-0306-2 C460EZ700-0307-2 C460EZ700-0308-2 310 mW 280 mW 240 mW 455 nm 457.5 nm 460 nm Dominant Wavelength 462.5 nm 465 nm Radiant Flux C470EZ700-S20000-2 C470EZ700-0309-2 C470EZ700-0310-2 C470EZ700-0311-2 C470EZ700-0312-2 C470EZ700-0305-2 C470EZ700-0306-2 C470EZ700-0307-2 C470EZ700-0308-2 C470EZ700-0301-2 C470EZ700-0302-2 C470EZ700-0303-2 C470EZ700-0304-2 280 mW 240 mW 200 mW 465 nm 467.5 nm 470 nm Dominant Wavelength 472.5 nm 475 nm Radiant Flux C527EZ700-Sxx00-2 C527EZ700-0210-2 C527EZ700-0211-2 C527EZ700-0212-2 C527EZ700-0207-2 C527EZ700-0208-2 C527EZ700-0209-2 C527EZ700-0204-2 C527EZ700-0205-2 C527EZ700-0206-2 C527EZ700-0201-2 C527EZ700-0202-2 C527EZ700-0203-2 150 mW 130 mW 110 mW 90 mW 520 nm 525 nm 530 nm Dominant Wavelength 535 nm Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright, EZ, and EZ700 are trademarks of Cree, Inc. 3 CPR3DW Rev. B Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Characteristic Curves These are representative measurements for the EZBright Power Chip LED product. Actual curves will vary slightly for the various radiant flux and dominant wavelength bins. Dominant Wavelength Shift vs. Junction Temperature Voltage Shift vs. Junction Temperature Forward Current vs. Forward Voltage 500 Voltage Shift(nm) (V) DW Shift If (mA) 400 300 200 100 0 0 1 2 3 4 5 6 0.100 5 0.000 4 -0.100 3 2 -0.200 1 -0.300 0 -0.400 -1 -0.500 -2 -0.600 25 25 50 50 Vf (V) 110% 175% 105% 150% 100% 125% 100% 75% 50% 25% 0% 95% 90% 85% 80% 75% 70% 0 65% 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 25 50 If (mA) 5 8 4 DW Shift (nm) DW DW Shift Shift (nm) (nm) 6 12 0 -4 -8 100 125 150 Dominant Wavelength Shift vs. Junction Temperature 16 4 75 Junction Temperature (°C) Wavelength Shift vs. Forward Current -12 -16 150 150 Relative Light Intensity vs. Junction Temperature 200% Relative Intensity Relative Relative Intensity Intensity Relative Intensity vs. Forward Current 75 100 125 75 100 125 Junction Temperature (°C) Junction Temperature (°C) 3 2 1 0 -1 0 -2 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 25 If (mA) 50 75 100 125 150 Junction Temperature (°C) Relative Light Intensity vs. Junction Temperature 110% Relative Intensity 105% 100% 95% Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree 90% and the Cree logo are registered trademarks, and EZBright, EZ, and EZ700 are trademarks of Cree, Inc. 4 CPR3DW Rev. B 85% 80% 75% Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Radiation Pattern This is a representative radiation pattern for the EZBright Power Chip LED product. Actual patterns will vary slightly for each chip. Copyright © 2008-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and EZBright, EZ, and EZ700 are trademarks of Cree, Inc. 5 CPR3DW Rev. B Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com