AVX CB017D0102 Film chip capacitors pen dielectric cb sery Datasheet

Film Chip Capacitors
PEN DIELECTRIC – CB Series
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized PEN (polyethylene naphtalate).
ADVANTAGES
APPLICATIONS
General purpose function in low voltage applications where
miniaturization and SMD is required. Typical applications
would be:
• Automotive (Airbag, Fuel injection calculator...)
• Telecom (Public switching systems, modems, telephone
set, cordless, mobile)
• Industrial (SMPS, Power convertor module...)
• Use of high temperature dielectric films make these
capacitors suitable for IR or vapor phase reflow processes.
This chip is built without specific encapsulation.
• The intrinsic elasticity of the dielectric film allows an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
• The self-healing property of film technology results to a
safety open failure mode and better overall reliability.
• Excellent thermal shock resistance.
• Low dissipation factor ESR & ESL.
• No piezoelectric effect.
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PEN dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on CR
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum : IR
Temperature range
A.C. applications
20
55/125/56
1nF to 4.7μF
±5%, ±10%
25Vdc to 630Vdc
1.4Vr 2 sec. at 25°C
IR or vapor phase reflow (not suitable for wave soldering)
< 100 x 10-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
for C > 0.33μF IR C > 400 sec. at 20°C for 1 min. charge at 10Vdc
for VR < 100Vdc and 100Vdc for VR ≥ 100Vdc
-55°C to 125°C with voltage derating of 1.25%/°C between 105°C and 125°C
For high frequency A.C. application please check with AVX
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 25V Vac: 16V
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB017C0102+ --
0.0012
CB017C0122+ --
0.0015
CB017C0152+ --
0.0018
CB017C0182+ --
0.0022
CB017C0222+ --
0.0027
CB017C0272+ --
0.0033
CB017C0332+ --
0.0047
CB017C0472+ --
0.0056
CB017C0562+ --
0.0068
CB017C0682+ --
0.0082
CB017C0822+ --
0.010μF
CB017C0103+ --
0.012
CB017C0123+ --
0.015
CB017C0153+ --
0.018
CB017C0183+ --
0.022
CB017C0223+ --
0.027
CB027C0273+ --
0.033
CB027C0333+ --
0.047
CB027C0473+ --
0.056
CB027C0563+ --
0.068
CB027C0683+ --
0.082
CB027C0823+ --
0.100μF
CB027C0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
2.20
(0.098) (0.087)
2.50
2.30
(0.098) (0.091)
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.33
(0.092)
2.33
(0.092)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
180
( 7.087)
W1
W2 max
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
3900
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2000
BA
2000
2000
BA
BA
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA = tape & reel
21
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 50V Vac: 40V
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB017D0102+ --
0.0012
CB017D0122+ --
0.0015
CB017D0152+ --
0.0018
CB017D0182+ --
0.0022
CB017D0222+ --
0.0027
CB017D0272+ --
0.0033
CB017D0332+ --
0.0047
CB017D0472+ --
0.0056
CB017D0562+ --
0.0068
CB017D0682+ --
0.0082
CB017D0822+ --
0.010μF
CB017D0103+ --
0.012
CB017D0123+ --
0.015
CB017D0153+ --
0.018
CB017D0183+ --
0.022
CB017D0223+ --
0.027
CB027D0273+ --
0.033
CB027D0333+ --
0.047
CB027D0473+ --
0.056
CB027D0563+ --
0.068
CB027D0683+ --
0.082
CB027D0823+ --
0.100μF
CB027D0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
2.20
(0.098) (0.087)
2.50
2.30
(0.098) (0.091)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA = tape & reel
22
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.33
(0.092)
2.33
(0.092)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
W1
W2 max
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
3900
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2000
BA
2000
2000
BA
BA
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 63V Vac: 40V
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB037D0102+ --
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0047
0.0056
0.0068
0.0082
0.010μF
CB037D0122+ --
CB037D0152+ --
CB037D0182+ --
CB037D0222+ --
CB037D0272+ --
CB037D0332+ --
CB037D0472+ --
CB037D0562+ --
CB037D0682+ --
CB037D0822+ --
CB037D0103+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.6
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
Reel Dimensions
A
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
W1
W2 max
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
1200
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
BA
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
23
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
VOLTAGE Vdc: 63V Vac: 40V
Capacitance
Range
(CR)
Ordering
Code
0.010μF
CB037D0103+ --
0.012
CB037D0123+ --
0.015
0.018
0.022
0.027
0.033
0.047
0.056
0.068
0.082
0.100μF
CB037D0153+ --
CB037D0183+ --
CB037D0223+ --
CB037D0273+ --
CB037D0333+ --
CB037D0473+ --
CB037D0563+ --
CB037D0683+ --
CB037D0823+ --
CB037D0104+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(.0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
1.90
(0.126) (0.075)
3.20
1.90
(0.126) (0.075)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.70
(0.126) (0.107)
3.20
2.70
(0.126) (0.107)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.80
(0.126) (0.111)
3.20
2.80
(0.126) (0.111)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
24
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
3.10
(0.122)
3.10
(0.122)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
3.10
(0.122)
3.10
(0.122)
Reel Dimensions
A
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
W1
W2 max
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
4500
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
700
BA
1500
3000
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
700
BA
1500
3000
BC
BC
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
L
VOLTAGE Vdc: 63V Vac: 40V
Capacitance
Range
(CR)
Ordering
Code
0.120
CB037D0124+ --
0.150
0.180
0.220
CB037D0154+ --
CB037D0184+ --
CB037D0224+ --
0.330
CB047D0334+ --
0.470
CB047D0474+ --
0.560
CB047D0564+ --
0.680
CB047D0684+ --
0.82*
CB057D0824+ --
1μF*
CB057D0105+ --
1.5*
CB057D0155+ --
2.2
CB167D0225+ --
2.7
CB177D0275+ --
3.3
CB187D0335+ --
4.7
CB187D0475+ --
0.001μF
CB017E0102+ --
0.0012
CB017E0122+ --
0.0015
CB017E0152+ --
0.0018
CB017E0182+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.30
(0.287)
7.30
(0.287)
7.30
(0.287)
10.5
(0.413)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
3.00
(0.126) (0.118)
3.20
3.00
(0.126) (0.118)
5.00
4.00
(0.195) (0.158)
5.00
4.00
(0.195) (0.158)
5.00
2.50
(0.195) (0.099)
5.00
3.90
(0.195) (0.154)
6.10
4.40
(0.240) (0.173)
6.10
4.70
(0.240) (0.185)
6.10
4.70
(0.240) (0.185)
7.60
6.10
(0.299) (0.240)
10.2
6.70
(0.402) (0.264)
13.7
5.30
(0.539) (0.209)
13.7
7.20
(0.539) (0.283)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.031)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
K0
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
2.06
(0.315) (0.081)
8.00
2.06
(0.315) (0.081)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
3.10
(0.315) (0.122)
8.00
3.10
(0.315) (0.122)
8.00
4.10
(0.315) (0.162)
8.00
4.10
(0.315) (0.162)
8.00
3.10
(0.315) (0.122)
8.00
4.10
(0.315) (0.162)
12.0
5.23
(0.472) (0.206)
12.0
4.80
(0.472) (0.189)
12.0
4.80
(0.472) (0.189)
12.0
6.19
(0.472) (0.244)
16.0
7.00
(0.629) (0.274)
24.0
6.30
(0.944) (0.248)
24.0
7.60
(0.944) (0.299)
VOLTAGE Vdc: 100V
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
Reel Dimensions
A
W1
W2 max
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
( 7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
( 7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 63V
180
8.40
14.4
(7.087) (0.331) (0.567)
180
8.40
14.4
(7.087) (0.331) (0.567)
180
8.40
14.4
(7.087) (0.331) (0.567)
180
8.40
14.4
(7.087) (0.331) (0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
900
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
700
BA
1500
3000
BC
1500
2300
BC
1500
2300
BC
1500
3000
BC
1500
2300
BC
1000
1100
BC
1000
1800
BC
1000
1800
BC
500
900
BC
300
600
BC
300
400
BC
300
300
BC
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
BA
*Special length: 7.3 +0.7/-0.3 (0.287 +0.026/-0.012)
25
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 100V Vac: 63V
Capacitance
Range
(CR)
Ordering
Code
0.0022
CB017E0222+ --
0.0027
CB017E0272+ --
0.0033
CB017E0332+ --
0.0047
CB017E0472+ --
0.0056
CB017E0562+ --
0.0068
CB017E0682+ --
0.0082
CB017E0822+ --
0.010μF
CB017E0103+ --
0.012
CB027E0123+ --
0.015
CB027E0153+ --
0.018
CB027E0183+ --
0.022
CB027E0223+ --
0.027
CB037E0273+ --
0.033
0.047
0.056
0.068
0.082
CB037E0333+ --
CB037E0473+ --
CB037E0563+ --
CB037E0683+ --
CB037E0823+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063)1 (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
3.20
2.20
(0.126) (0.087)
3.20
2.20
(0.126) (0.087)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.60
(0.126) (0.102)
3.20
2.60
(0.126) (0.102)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
26
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
2.60
(0.1024)
2.60
(0.1024)
2.06
(0.081)
2.06
(0.081)
3.10
(0.122)
3.10
(0.122)
2.60
(0.102)
2.60
(0.102)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
W1
W2 max
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
3900
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
700
BA
1500
3000
BC
1500
900
BA
1500
3600
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
BA
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 100V Vac: 63V
Capacitance
Range
(CR)
Ordering
Code
0.082
CB037E0823+ --
0.100μF
CB037E0104+ --
0.120
CB047E0124+ --
0.150
CB047E0154+ --
0.180
CB047E0184+ --
0.220
CB047E0224+ --
0.330
CB047E0334+ --
0.47*
CB057E0474+ --
0.56*
CB057E0564+ --
0.68*
CB057E0684+ --
0.82
CB167E0824+ --
1
CB167E0105+ --
1.5
CB177E0155+ --
2.2
CB177E0225+ --
3.3
CB187E0335+ --
0.001μF
CB037G0102+ --
0.0012
0.0015
0.0018
CB037G0122+ --
CB037G0152+ --
CB037G0182+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.30
(0.287)
7.30
(0.287)
7.30
(0.287)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.50
(0.126) (0.099)
3.20
3.00
(0.126) (0.118)
3.20
3.00
(0.126) (0.118)
5.00
4.00
(0.195) (0.158)
5.00
3.30
(0.195) (0.130)
5.00
3.00
(0.195) (0.118)
5.00
4.00
(0.195) (0.158)
5.00
4.00
(0.195) (0.158)
6.10
4.50
(0.240) (0.177)
6.10
4.00
(0.240) (0.158)
6.10
4.50
(0.240) (0.177)
7.6
5.80
(0.299) (0.229)
7.60
6.00
(0.299) (0.237)
10.2
5.50
(0.402) (0.217)
10.2
6.90
(0.402) (0.272)
13.7
7.10
(0.539) (0.280)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
K0
8.00
2.60
(0.315) (0.102)
8.00
3.10
(0.315) (0.122)
8.00
3.10
(0.315) (0.122)
8.00
4.10
(0.315) (0.162)
8.00
3.45
(0.315) (0.136)
8.00
3.10
(0.315) (0.122)
8.00
4.10
(0.315) (0.162)
8.00
4.10
(0.315) (0.162)
12.0
4.80
(0.472) (0.189)
12.0
4.10
(0.472) (0.162)
12.0
4.80
(0.472) (0.189)
12.0
6.19
(0.472) (0.244)
12.0
6.19
(0.472) (0.244)
16.0
5.70
(0.629) (0.224)
16.0
7.00
(0.629) (0.274)
24.0
7.60
(0.944) (0.299)
VOLTAGE Vdc: 250V
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
Reel Dimensions
A
W1
W2 max
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 160V
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.087) (0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
3600
1500
700
BA
1500
3000
BC
1500
2300
BC
1500
2800
BC
1500
3000
BC
1500
2300
BC
1500
2300
BC
1000
1800
BC
1000
2300
BC
1000
1800
BC
500
900
BC
500
900
BC
300
700
BC
300
600
BC
300
300
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
BC
*Special length: 7.3 +0.7/-0.3 (0.287 +0.026/-0.012)
27
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 250V Vac: 160V
Capacitance
Range
(CR)
Ordering
Code
0.0018
CB037G0182+ --
0.0022
CB037G0222+ --
0.0027
0.0033
0.0047
0.0056
0.0068
0.0082
0.010μF
0.012
0.015
0.018
CB037G0272+ --
CB037G0332+ --
CB037G0472+ --
CB037G0562+ --
CB037G0682+ --
CB037G0822+ --
CB037G0103+ --
CB037G0123+ --
CB037G0153+ --
CB037G0183+ --
L
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.40
(0.126) (0.094)
3.20
2.40
(0.126) (0.094)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
28
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
Reel Dimensions
A
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
W1
W2 max
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
4500
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
BC
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 250V Vac: 160V
Capacitance
Range
(CR)
Ordering
Code
0.022
CB037G0223+ --
0.027
CB047G0273+ --
0.033
CB047G0333+ --
0.047
CB047G0473+ --
0.056
CB047G0563+ --
0.068
CB047G0683+ --
0.082
CB047G0823+ --
0.100μF
CB047G0104+ --
0.120
CB057G0124+ --
0.150
CB057G0154+ --
0.180
CB057G0184+ --
0.22μF
CB057G0224+ --
0.330
CB167G0334+ --
0.470
CB177G0474+ --
0.560
CB177G0564+ --
0.680
CB187G0684+ --
1μF
CB187G0105+ --
0.001μF
CB037I0102+ --
0.0012
0.0015
CB037I0122+ --
CB037I0152+ --
L
4.70
(0.185)
4.70
(0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.90
(0.126) (0.114)
3.20
2.90
(0.126) (0.114)
5.00
1.80
(0.195) (0.071)
5.00
2.20
(0.195) (0.087)
5.00
2.90
(0.195) (0.114)
5.00
2.90
(0.195) (0.114)
5.00
4.00
(0.195) (0.158)
5.00
4.50
(0.195) (0.177)
5.00
4.50
(0.195) (0.177)
6.10
3.90
(0.240) (0.153)
6.10
4.70
(0.240) (0.185)
6.10
5.00
(0.240) (0.197)
6.10
5.70
(0.240) (0.225)
7.60
6.10
(0.299) (0.240)
10.2
5.50
(0.402) (0.205)
10.2
6.00
(0.402)
(0.236)
13.7
4.30
(0.539) (0.169)
13.7
6.40
(0.539) (0.252)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
16.0
(0.629)
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
K0
8.00
3.10
(0.315) (0.122)
8.00
3.10
(0.315) (0.122)
8.00
2.43
(0.315) (0.096)
8.00
2.43
(0.315) (0.096)
8.00
3.10
(0.315) (0.122)
8.00
3.10
(0.315) (0.122)
8.00
4.10
(0.315) (0.161)
8.00
4.60
(0.315) (0.181)
8.00
4.60
(0.315) (0.181)
12.0
4.80
(0.472) (0.189)
12.0
4.80
(0.472) (0.189)
12.0
5.23
(0.472) (0.206)
12.0
5.90
(0.472) (0.232)
12.0
6.19
(0.472) (0.244)
16.0
5.70
(0.629) (0.224)
16.0
5.70
(0.629) (0.224)
24.0
4.50
(0.944) (0.177)
24.0
6.30
(0.944) (0.248)
VOLTAGE Vdc: 400V
12.0
8.00
2.06
(0.472)
(0.315) (0.081)
12.0
8.00
2.06
(0.472)
(0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472)
(0.315) (0.081)
Reel Dimensions
A
W1
W2 max
180
12.4
18.4
(7.087) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 200V
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
700
1500
3000
BC
1500
3500
BC
1500
3500
BC
1500
3000
BC
1500
3000
BC
1500
2300
BC
1500
1900
BC
1500
1900
BC
1000
1800
BC
1000
1800
BC
1000
1100
BC
1000
900
BC
500
900
BC
300
700
BC
300
700
BC
300
600
BC
300
400
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
BA
29
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 400V Vac: 200V
Capacitance
Range
(CR)
Ordering
Code
0.0015
CB037I0152+ --
0.0018
CB037I0182+ --
0.0022
0.0027
0.0033
0.0047
0.0056
0.0068
0.0082
CB037I0222+ --
CB037I0272+ --
CB037I0332+ --
CB037I0472+ --
CB037I0562+ --
CB037I0682+ --
CB037I0822+ --
0.010μF
CB047I0103+ --
0.012
CB047I0123+ --
0.015
CB047I0153+ --
0.018
CB047I0183+ --
0.022
CB047I0223+ --
0.027
CB047I0273+ --
L
4.70
(0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
5.00
1.90
(0.195) (0.075)
5.00
2.20
(0.195) (0.087)
5.00
2.00
(0.224) (0.079)
5.00
2.30
(0.195) (0.091)
5.00
2.80
(0.195) (0.110)
5.00
3.30
( 0.195) (0.130)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
30
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.087)
0.80
(0.032)
0.80
(0.032)
0.80
( 0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
( 0.472)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
( 0.315)
Reel Dimensions
K0
A
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.06
180
(0.081) (7.09)
2.06
330
(0.081) (12.99)
2.10
330
(0.083) (12.99)
2.43
330
(0.096) (12.99)
2.43
330
(0.096) (12.99)
2.43
330
(0.096) (12.99)
3.10
330
(0.122) (12.99)
3.45
330
( 0.136) (12.99 )
W1
W2 max
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) ( 0.724 )
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
4500
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
4400
BC
1500
3500
BC
1500
4400
BC
1500
3500
BC
1500
3000
BC
1500
2800
BC
BC
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 400V Vac: 200V
Capacitance
Range
(CR)
Ordering
Code
0.033
CB047I0333+ --
0.047
CB057I0473+ --
0.056
CB057I0563+ --
0.068
CB057I0683+ --
0.082
CB167I0823+ --
0.100μF
CB167I0104+ --
0.120
CB167I0124+ --
0.150
CB167I0154+ --
0.180
CB177I0184+ --
0.220
CB177I0224+ --
0.270
CB177I0274+ --
0.330
CB187I0334+ --
0.390
CB187I0394+ --
0.470
CB187I0474+ --
0.001μF
CB037K0102+ --
0.0012
0.0015
0.0018
0.0022
CB037K0122+ --
CB037K0152+ --
CB037K0182+ --
CB037K0222+ --
L
5.80
( 0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
15.3
(0.601)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
4.70
(0.185)
Chip Dimensions
*Tolerances
(page 6)
W
H max
5.00
3.90
( 0.195) (0.154)
6.10
3.20
(0.24)
(0.126)
6.10
3.70
(0.24)
(0.146)
6.10
4.40
(0.24)
(0.173)
7.60
4.50
(0.299) (0.177)
7.60
4.00
(0.299) (0.158)
7.60
5.00
(0.299) (0.196)
7.60
6.00
(0.299) (0.235)
10.2
5.10
(0.402) (0.200)
10.2
5.00
(0.402) (0.196)
10.2
6.50
(0.402) (0.255)
13.7
4.20
(0.539) (0.165)
13.7
5.80
(0.539) (0.228)
13.7
6.50
(0.539) (0.255)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
3.20
(0.126)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
2.00
(0.079)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
T
0.80
( 0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.0315)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
Tape Dimensions
Reel Dimensions
W
P1
K0
12.0
8.00
4.10
( 0.472) ( 0.315) (0.162)
24.0
12.0
3.80
(0.944) (0.472) (0.149)
24.0
12.0
3.80
(0.944) (0.472) (0.149)
24.0
12.0
4.80
(0.944) (0.472) (0.189)
24.0
12.0
4.90
(0.944) (0.472) (0.193)
24.0
12.0
4.90
(0.944) (0.472) (0.193)
24.0
12.0
6.19
(0.944) (0.472) (0.244)
24.0
12.0
6.19
(0.944) (0.472) (0.244)
24.0
16.0
5.70
(0.944) (0.629) (0.225)
24.0
16.0
5.70
(0.944) (0.629) (0.225)
24.0
16.0
7.00
(0.944) (0.629) (0.275)
24.0
24.0
4.50
(0.944) (0.944) (0.178)
24.0
24.0
6.30
(0.944) (0.944) (0.248)
24.0
24.0
7.60
(0.944) (0.944) (0.299)
VOLTAGE Vdc: 630V
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
12.0
8.00
2.06
(0.472) (0.315) (0.081)
A
W1
W2 max
330
12.4
18.4
(12.99 ) (0.488) ( 0.724 )
330
24.4
30.4
(12.99) (0.96)
(1.196)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
16.4
22.4
(12.99) (0.645) (0.881)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
330
24.4
30.4
(12.99) (0.961) (1.196)
Vac: 250V
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
330
12.4
18.4
(12.99) (0.488) (0.724)
180
12.4
18.4
(7.09) (0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
2300
1000
2250
BC
1000
2250
BC
1000
1800
BC
500
1100
BC
500
1100
BC
500
900
BC
500
900
BC
300
700
BC
300
700
BC
300
600
BC
300
600
BC
300
400
BC
300
300
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1200
BA
BC
31
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 630V Vac: 250V
Capacitance
Range
(CR)
Ordering
Code
0.0022
CB037K0222+ --
0.0027
CB037K0272+ --
0.0033
0.0047
CB037K0332+ --
CB037K0472+ --
0.0056
CB047K0562+ --
0.0068
CB047K0682+ --
0.0082
CB047K0822+ --
0.010μF
CB047K0103+ --
0.012
CB047K0123+ --
0.015
CB047K0153+ --
0.018
CB047K0183+ --
0.022
CB057K0223+ --
0.027
CB057K0273+ --
0.033
CB057K0333+ --
0.047
CB167K0473+ --
0.056
CB167K0563+ --
0.068
CB167K0683+ --
0.082
CB177K0823+ --
0.100μF
CB177K0104+ --
L
4.70
(0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
4.70
( 0.185)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
5.80
(0.228)
7.20
(0.283)
7.20
(0.283)
7.20
(0.283)
10.5
(0.413)
10.5
(0.413)
10.5
(0.413)
12.8
(0.503)
12.8
(0.503)
Chip Dimensions
*Tolerances
(page 6)
W
H max
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.00
(0.126) (0.079)
3.20
2.50
(0.126) (0.099)
3.20
2.50
(0.126) (0.099)
5.00
2.00
(0.195) (0.079)
5.00
2.00
(0.195) (0.079)
5.00
2.20
(0.195) (0.086)
5.00
2.00
(0.195) (0.079)
5.00
3.00
(0.195) (0.118)
5.00
3.40
(0.195) (0.136)
5.00
4.00
(0.195) (0.157)
6.10
3.40
(0.240) (0.136)
6.10
4.00
(0.240) (0.157)
6.10
4.80
(0.240) (0.189)
7.60
3.80
(0.299) (0.150)
7.60
4.60
(0.299) (0.181)
7.60
5.50
(0.299) (0.216)
10.2
4.50
(0.402) (0.177)
10.2
4.60
(0.402) (0.181)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
32
Tape Dimensions
T
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.8
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
24.0
(0.944)
24.0
(0.944)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.0
(0.315)
8.0
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
16.0
(0.629)
16.0
(0.629)
K0
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.06
(0.081)
2.10
(0.083)
2.10
(0.083)
2.43
(0.096)
2.10
(0.083)
3.10
(0.122)
3.45
(0.136)
4.10
(0.162)
3.80
(0.149)
4.80
(0.189)
5.23
(0.206)
3.93
(0.155)
6.19
(0.244)
6.19
(0.244)
4.70
(0.185)
4.70
(0.185)
Reel Dimensions
A
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
330
(12.99)
180
(7.09)
180
(7.09)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
W1
W2 max
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
16.4
22.4
(0.645) (0.881)
16.4
22.4
(0.645) (0.881)
16.4
22.4
(0.645) (0.881)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
1500
Reel
4500
1500
1200
BA
1500
4500
BC
1500
1200
BA
1500
4500
BC
1500
1201
BA
1500
4500
BC
1500
4400
BC
1500
4400
BC
1500
3500
BC
1500
4400
BC
1500
3000
BC
1500
2800
BC
1500
2300
BC
1000
2250
BC
1000
1800
BC
1000
1100
BC
500
1400
BC
500
900
BC
500
900
BC
300
900
BC
300
900
BC
BC
Film Chip Capacitors
PEN DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 630V Vac: 250V
Capacitance
Range
(CR)
Ordering
Code
0.120
CB177K0124+ --
0.15*
CB177K0154K --
0.180
CB187K0184+ --
0.220
CB187K0224+ --
L
12.8
(0.503)
12.8
(0.503)
15.3
(0.601)
15.3
(0.601)
Chip Dimensions
*Tolerances
(page 6)
W
H max
10.2
6.00
(0.402) (0.236)
10.2
6.90
(0.402) (0.271)
13.7
5.60
(0.539) (0.220)
13.7
6.00
(0.539) (0.236)
For other Values: upon request
Replace the + by the tolerance code:
J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
Tape Dimensions
T
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
0.80
(0.032)
W
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
24.0
(0.944)
P1
16.0
(0.629)
16.0
(0.629)
24.0
(0.944)
24.0
(0.944)
K0
7.00
(0.275)
7.00
(0.275)
6.30
(0.248)
6.30
(0.248)
Reel Dimensions
A
330
(12.99)
330
(12.99)
330
(12.99)
330
(12.99)
W1
W2 max
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
24.4
30.4
(0.961) (1.196)
Packaging Unit
Reel
Pkg
Code
Bulk
300
Reel
600
300
600
BC
300
400
BC
300
400
BC
BC
*Only available in tolerance ±10%
33
Film Chip Capacitors
PEN DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below.
They are NOT suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
1206 to 1812
3°C / second max
2220 to 6054
3°C / second max
150°C
200°C
180 sec. max
150°C
200°C
180 sec. max
217°C
60 sec. max
250°C
217°C
75 sec. max
255°C
10 sec.
10 sec.
6°C / sec.
6°C / sec.
tp
Tp
Ramp up
Tp - 5ºC
TL
Ts max
Temperature (ºC)
Profile Feature
Ramp-Up (Ts max to Tp)
Preheat
- Temperature Min (Ts min)
- Temperature Min (Ts max)
- Time (ts min to ts max)
Time maintained above
- Temperature (TL)
- Time (tL)
Peak temperature (Tp)
Time within 5°C of peak
temperature (tp)
Ramp-Down
tL
Ts min
Ramp
down
tS
0
30
60
90
120
150
180
210
240
270
300
330
Time (seconds)
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering
paste thickness: 1206 to 2824 :150 to 200μm
C
B
A
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
PAD DIMENSIONS: millimeters (inches)
Size Code
Case Size
01
02
03
04
05
16
17
18
1206
1210
1812
2220
2824
4030
5040
6054
A
1.30
2.00
3.00
5.00
6.00
7.50
11.2
14.6
B
(0.051)
(0.079)
(0.118)
(0.195)
(0.234)
(0.295)
(0.441)
(0.575)
1.30
1.30
1.50
1.90
2.50
3.00
3.50
3.60
(0.051)
(0.051)
(0.059)
(0.075)
(0.098)
(0.118)
(0.137)
(0.147)
C
2.20 (0.087)
2.20 (0.087)
3.50 (0.137)
4.50 (0.178)
5.70 (0.224)
8.00 (0.315)
10.3 (0.406)
12.6 (0.496)
RECOMMENDED CLEANING
OTHER CAUTIONS
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type
Ref. Spec.
Temperature cycling
JESD22-A104
Ambient Temperature /
Humidity Storage
High Temperature /
Humidity Storage
34
Test Conditions
-55°C +85(+10/-0)°C air
5 to 10 minutes soak 3 cycles/hour
Analysis
Results
SEM x 1000
Pass
30+/-2°C - 60+/-3% RH -2000H
SEM x 1000
Pass
70+/-5°C - 93+3/-2% RH -1000H
SEM x 1000
Pass
Film Chip Capacitors
PEN DIELECTRIC – CB Series
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
5
4
3
2
1
0
-1
-2
-3
-4
-5
FREQUENCY CHARACTERISTICS
Capacitance
⌬ C/C 1 kHz (%)
Capacitance
⌬ C/C 20°C (%)
4
2
0
-2
-4
-60
-40
-20
0
40
60
80
20
Temperature (°C)
100
120 140
0.1
1
100
Frequency (kHz)
Dissipation Factor
70
10
Dissipation Factor
DF 1 kHz (10-4)
300
60
DF 20°C (10-4)
250
50
200
40
150
30
100
20
50
10
0
0
-60
-40
-20
0
40
60
80
20
Temperature (°C)
100
0.1
120 140
1
10
1000
Frequency (kHz)
Insulation Resistance
100
100
Impedance
IR x C (G.ohm x µF)
Z (mOhm)
10000
IR(G.ohm)
63 V range (nF)
1000
10
1
2.2
4.7
100
0
10
22
10
1
-40
-20
0
20
40
Temperature (°C)
60
80
100
4700
1
0.1
1
2200
1000
470
220
100
47
10
100
1000
Frequency (MHz)
35
Film Chip Capacitors
PEN DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB01 to CB05)
63 Vdc / 40 Vac
45
4.7µF
1µF
0.1µF
63 Vdc / 40 Vac
63Vdc / 40Vac
0.01µF
40
35
25
I rms (A)
V rms (V)
30
20
15
10
5
0
0.1
1
10
100
1000
10000
7
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
4.7µF
1µF
0.1µF
0.01µF
1
10
FREQUENCY (kHz)
1µF
0.1µF
0.01µF
4.5
10000
1000
10000
2.2µF
4
3.5
I rms (A)
V rms (V)
2.2µF
3
1µF
2.5
2
1.5
1
0.1µF
0.5
1
180
10
100
1000
0.01µF
0
10000
0.1
1
10
1µF
0.1µF
250 Vdc / 160 Vac
0.01µF
140
I rms (A)
120
100
80
60
40
20
1
10
100
FREQUENCY (kHz)
100
FREQUENCY (kHz)
160
V rms (V)
1000
100 Vdc / 63 Vac
250 Vdc / 160 Vac
36
10000
5
FREQUENCY (kHz)
0
0.1
1000
FREQUENCY (kHz)
100 Vdc / 63 Vac
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
0.1
100
1000
10000
7
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1
1µF
0.1µF
0.01µF
1
10
100
FREQUENCY (kHz)
Film Chip Capacitors
PEN DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB03 to CB05)
400 Vdc / 200 Vac
220
400 Vdc / 200 Vac
1
0.47µF
0.1µF
0.01µF
200
180
160
0.47µF
120
I rms (A)
V rms (V)
140
100
80
0.5
60
0.1µF
40
0.01µF
20
0
0.1
1
10
100
1000
10000
0
0.1
FREQUENCY (kHz)
1
10
100
1000
10000
1000
10000
FREQUENCY (kHz)
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0.1
0.27µF
0.1µF
630 Vdc / 250 Vac
1
0.01µF
0.27µF
I rms (A)
V rms (V)
630 Vdc / 250 Vac
0.5
0.1µF
0.01µF
1
10
100
1000
0
10000
0.1
FREQUENCY (kHz)
1
10
100
FREQUENCY (kHz)
MAXIMUM PULSE RISE TIME (DV/DT)
Voltage Range
Dv/dt max.
(V/µsec)
25
50
63
100
250
400
630
15
40
40
50
150
200
250
37
Film Chip Capacitors
PEN DIELECTRIC – CB Series – RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g)
Lead
Mercury
Cadmium
CB range
RoHS Limit (ppm)
Pass/Fail
0
1000
Pass
0
1000
Pass
0
100
Pass
Hexavalent
Chromium
0
1000
Pass
PBB
PBDE
0
1000
Pass
0
1000
Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
External Plating
100% Matte Sn as standard
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
Pb Free Reflow Solder compliant, MSL = 3.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL
e3 termination.
PRODUCT LABELING:
PRODUCT TRACEABILITY:
(For informational purposes only to be phased in on reel and
container.)
Full internal material traceability by reference to unique lot
number marked on reel and external package.
Pb Free:
38
RoHS Compliant: