Series 74 Convoluted Tubing 121-101 - Type D Series 74 Helical Convoluted Tubing (MIL-T-81914) Natural or Black PFA, FEP, PTFE, Tefzel® (ETFE) or PEEK 121-101-1-1-16 B E T TYPE D Shield N = Nickel/Copper S = SnCuFe T = Tin/Copper C = Stainless Steel Product Series EXTERNAL SHIELD Basic No. Class 1 = Standard Wall 2 = Thin Wall * Material E = ETFE F = FEP K = PEEK *** Convolution 1 = Standard 2 = Close P = PFA T = PTFE** Color B = Black C = Natural Dash No. (Table I) SHIELD TUBING B DIA A DIA MINIMUM BEND RADIUS LENGTH (AS SPECIFIED IN FEET) DASH FRACTIONAL NO. SIZE REF 06 3/16 09 9/32 10 5/16 12 3/8 14 7/16 16 1/2 20 5/8 24 3/4 28 7/8 32 1 40 1 1/4 48 1 1/2 56 1 3/4 64 2 © 2003 Glenair, Inc. TABLE I A INSIDE DIA MIN .181 (4.6) .273 (6.9) .306 (7.8) .359 (9.1) .427 (10.8) .480 (12.2) .603 (15.3) .725 (18.4) .860 (21.8) .970 (24.6) 1.205 (30.6) 1.437 (36.5) 1.688 (42.9) 1.937 (49.2) B DIA MAX .370 (9.4) .464 (11.8) .500 (12.7) .560 (14.2) .621 (15.8) .700 (17.8) .820 (20.8) .980 (24.9) 1.123 (28.5) 1.276 (32.4) 1.589 (40.4) 1.882 (47.8) 2.132 (54.2) 2.382 (60.5) MINIMUM BEND RADIUS .50 (12.7) .75 (19.1) .75 (19.1) .88 (22.4) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 1.75 (44.5) 1.88 (47.8) 2.25 (57.2) 2.75 (69.9) 3.25 (82.6) 3.63 (92.2) 4.25 (108.0) CAGE Codes 06324 Metric dimensions (mm) are in parentheses. * Consult factory for thin-wall, close convolution combination. ** For PTFE maximum lengths - consult factory. *** Consult factory for PEEK min/max dimensions. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-6