DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R 4 V TO 50 V 100 pF to 100 µF Product Specification – February 10, 2012 V.12 RoHS compliant & Halogen free Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 2 18 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP This specification describes X5R series chip capacitors with leadfree terminations. All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. APPLICATIONS PCs, Hard disk, Game PCs Power supplies DVD players Mobile phones Data processing FEATURES Supplied in tape on reel Nickel-barrier end termination RoHS compliant Halogen free compliant CTC & 12NC YAGEO BRAND ordering code GLOBAL PART NUMBER CC XXXX X X (1) X5R (2) (3) X ( PREFERRED ) BB (4) XXX (5) (1) SIZE – INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) (2) TOLERANCE K = ±10% M = ±20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 4=4V 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 3 18 PHYCOMP BRAND ordering codes GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER ( PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2 2 XX XX X X X X XX Capacitance value(1) Carrier type 50 = Blister (6.3 V) 55 = Paper/PE (≤6.3 V) 38 = Paper/PE (≥10 V) 22 = Blister (≥10 V) 54 = Bulk Tolerance 6 = ±10% 7 = ±20% Rated voltage - Termination 18 = 4 V 20 = 6.3 V 24 = 10 V 78 = 16 V 91 = 25 V 58 = 50 V Temperature characteristic 3 = X5R Packaging(2) 1 = reel: ∅180 mm; 7" 5 = reel: ∅330 mm; 13" 4 = bulk case YNM0011 Size 8 = 0201 7 = 0402 6 = 0603 0 = 0805 1 = 1206 2 = 1210 4 = 1812 (1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR X5R” (2) Quantity on reel depends on thickness classification; see table 5 PHYCOMP CTC CODE ( FOR NORTH AMERICA ) Example: 06032B225M5B20D 0603 2B 225 M 5 B 2 0 D Size code Temp. Char. Capacitance in pF Tolerance Voltage Termination Packing Marking Range identifier 0201 2B = X5R 0402 0603 0805 1206 1210 1812 101 = 100 pF; the third digit signifies the multiplying factor: 0=×1 1 = × 10 2 = × 100 K = ±10% 4=4V M = ±20% 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V B = NiSn 2 = 180 mm 7” Paper/PE 0 = no marking D = Class 2 MLCC 3 = 330 mm 13” Paper/PE B = 180 mm 7” Blister 3 = × 1,000 F = 330 mm 13” Blister 4 = × 10,000 P = Bulk case 5 = × 100,000 6 = × 1,000,000 7 = × 10,000,000 www.yageo.com Feb 10, 2012 V.12 4 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 18 4 V to 50 V CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. terminations electrodes MLB457 ceramic material Fig. 1 Surface mount multilayer ceramic capacitor construction DIMENSION Table 1 For outlines see fig. 2 TYPE 0201 0402 L1 (mm) W (mm) 0.6 ±0.03 (1) 0.3 ±0.03 (1) 0.6 ±0.05 (2) 0.3 ±0.05 (2) 1.0 ±0.05 (1) 0.5 ±0.05 (1) 1.0 ±0.15 (2) 0.5 ±0.15 (2) 1.0 ±0.20 (3) 0.5 ±0.20 (3) (1) (1) 1.6 ±0.10 0603 1206 1210 1812 0.8 ±0.10 T (MM) 1.6 ±0.15 (2) 0.8 ±0.15 (2) (3) (3) 1.6 ±0.20 0805 OUTLINES 0.8 ±0.20 2.0 ±0.10 (1) 1.25 ±0.10 (1) (2) 1.25 ±0.20 (2) 2.0 ±0.20 3.2 ±0.15 (1) 1.6 ±0.15 (1) (2) 1.6 ±0.20 (2) 3.2 ±0.20 (1) 2.5 ±0.20 (1) 3.2 ±0.40 (2) 2.5 ±0.30 (2) 4.5 ±0.20 (1) 3.2 ±0.20 (1) (2) 3.2 ±0.40 (2) 3.2 ±0.30 4.5 ±0.40 L2 / L3 (mm) L4 (mm) min. max. min. 0.10 0.20 0.20 For dimension see Table 1 W T 0.20 0.30 0.40 L2 L4 L1 Refer to table 2 to 4 0.20 0.60 0.40 0.25 0.75 0.55 0.25 0.75 1.40 0.25 0.75 1.40 0.25 0.75 2.20 L3 MBB211 Fig. 2 Surface mount multilayer ceramic capacitor dimension NOTE 1. Dimensions for size 0201, C < 1 µF; 0402, C < 4.7 µF; 0603, C < 10 µF; 0805 to 1812, C ≤ 100nF 2. Dimensions for size 0201, C ≥ 1 µF; 0402, C ≥ 4.7 µF; 0603, C ≥ 10 µF; 0805 to 1812, C > 100 nF 3. Dimensions for size 0402, C ≥ 10 µF; 0603, C ≥ 10 µF; www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 10 V 16 V 5 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 2 Sizes from 0201 to 0402 CAP. Last 2-digit of 12NC 0201 4V 0402 6.3 V 10 V 16 V 25 V 50 V 4V 6.3 V 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 39 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 µF 63 2.2 µF 67 4.7 µF 72 0.5±0.15 0.5±0.15 10 µF 76 0.5±0.20 0.5±0.20 25 V 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.3±0.03 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.3±0.03 0.3±0.03 0.5±0.05 0.5±0.05 0.3±0.05 0.3±0.05 0.5±0.05 0.5±0.05 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 6 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 3 Sizes from 0603 to 0805 CAP. Last 2-digit of 0603 12NC 6.3 V 10 V 0.8±0.1 0.8±0.1 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 µF 63 2.2 µF 67 4.7 µF 72 10 µF 76 22 µF 81 0805 16 V 25 V 0.8±0.1 0.8±0.1 6.3 V 10 V 16 V 0.85±0.1 1.25±0.2 0.85±0.1 1.25±0.2 0.85±0.1 1.25±0.2 25 V 1.25±0.2 0.85±0.1 1.25±0.2 0.8±0.15 1.25±0.2 1.25±0.2 0.8±0.2 0.8±0.2 1.25±0.2 1.25±0.2 47 µF 85 100 µF 89 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 7 18 CAPACITANCE RANGE & THICKNESS FOR X5R Table 4 Sizes from 1206 to 1812 CAP. Last 2-digit of 1206 12NC 6.3 V 10 V 16 V 25 V 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47nF 45 68 nF 47 100 nF 49 150 nF 52 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 µF 63 2.2 µF 67 4.7 µF 72 10 µF 76 22 µF 81 47 µF 85 100 µF 89 1210 1.6±0.2 1812 6.3 V 10 V 16 V 25 V 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 2.5±0.2 2.5±0.2 6.3 V 1.6±0.2 1.6±0.2 1.6±0.2 2.5±0.2 2.5±0.2 3.2±0.3 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 8 18 THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL 0201 0.3 ±0.03 mm 0402 0603 0805 1206 Ø180 MM / 7 INCH Ø330 MM / 13 INCH Paper Blister Paper Blister QUANTITY PER BULK CASE 8 mm 15,000 --- 50,000 --- --- 0.5 ±0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0.8 ±0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- 10,000 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 5,000 0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- --- 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- --- 1.00 / 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 --- 1.6 ±0.15 mm 8 mm --- 2,500 --- 10,000 --- 1.6 ±0.2 mm 8 mm --- 2,000 --- 10,000 --- 0.6 / 0.7 ±0.1 mm 8 mm --- 4,000 --- 15,000 --- 0.85 ±0.1 mm 8 mm --- 4,000 --- 10,000 --- 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 --- 1.15 ±0.15 mm 8 mm --- 3,000 --- 10,000 --- 1.25 ±0.2 mm 8 mm --- 3,000 --- --- --- 1210 1.5 ±0.1 mm 8 mm --- 2,000 --- --- --- 1.6 / 1.9 ±0.2 mm 8 mm --- 2,000 --- --- --- 2.0 ±0.2 mm 8 mm --- 2,000 1,000 --- --- --- 2.5 ±0.2 mm 8 mm --- 1,000 500 --- --- --- 1.15 ±0.15 mm 12 mm --- 3,000 --- --- --- 1.25 ±0.2 mm 12 mm --- 3,000 --- --- --- 1.35 ±0.15 mm 12 mm --- 2,000 --- --- --- 1.5 ±0.1 mm 12 mm --- 2,000 --- --- --- 1.6 ±0.2 mm 12 mm --- 2,000 --- --- --- 2.0 ±0.2 mm 12 mm --- 2,000 --- --- --- 0.6 / 0.85 ±0.1 mm 12 mm --- 2,000 --- --- --- 1.15 ±0.1 mm 12 mm --- 1,000 --- --- --- 1.25 ±0.2 mm 12 mm --- 1,000 --- --- --- 1.5 ±0.1 mm 12 mm --- 1,000 --- --- --- 1.6 ±0.2 mm 12 mm --- 1,000 --- --- --- 2.0 ±0.2 mm 12 mm --- 1,000 --- --- --- 2.5 ±0.2 mm 12 mm --- 500 --- --- --- 1808 1812 www.yageo.com Feb 10, 2012 V.12 9 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 18 ELECTRICAL CHARACTERISTICS X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068-1: Temperature: 15 °C to 35 °C - Relative humidity: 25% to 75% - Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose. - Table 6 VALUE DESCRIPTION Capacitance range 10 nF to 100 µF Capacitance tolerance ±10% and ±20% Dissipation factor (D.F.) 6.3 V ≤ 5% Exception: 0402 ≥ 180 nF; 1210 ≥ 22 µF ≤ 7% 0201 ≥ 12 nF; 0402 ≥ 330 nF; 0603 ≥ 2.2 µF; 0805 ≥ 1 µF; 1206 ≥ 22 µF; 1210 ≥ 100 µF 10 V ≤ 10% ≤ 5% Exception: 0402 ≥ 180 nF; 0805 ≥ 1 µF; 1206 ≥ 6.8 µF ≤ 7% 0201 ≥ 100 nF; 0402 ≥ 330 nF; 0603 ≥ 1 µF; ≤ 10% 0805 ≥ 2.2 µF; 1206 ≥ 10 µF; 1210 ≥ 10 µF 16 V ≤ 5% Exception: 0402 ≥ 180 nF; 0603 ≥ 680 nF; 0805 ≥ 1 µF ≤ 7% 0402 ≥ 330 nF; 0603 ≥ 2.2 µF; 0805 ≥ 10 µF ≤ 10% 1206 ≥ 10 µF; 1210 ≥ 10 µF ≥ 25 V ≤ 3.5% Exception: 0402 ≥ 27 nF; 1206 ≥ 4.7 µF; 0603 ≥ 220 nF; Insulation resistance after 1 minute at Ur (DC) ≤ 5% 1210 ≥ 10 µF 0402 ≥ 180 nF 0805 ≥ 4.7 µF; 0805 ≥ 2.2 µF; ≤ 7% 1206 ≥ 10 µF ≤ 10% Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): Operating temperature range: ±15% –55 °C to +85 °C www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors ΔC C (%) General Purpose & High Cap. X5R 4 V to 50 V 10 18 YNM0021 15 10 5 0 −5 −10 −15 −60 Fig. 3 −35 -10 15 40 65 90 T (oC) Typical capacitance change as a function of temperature www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 11 18 Size 0201 10 nF / 16 V Solid lines: Impedance / Dotted lines: ESR YNM0024 100.00 Z (Ω) 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0603 1 µF / 10 V Solid lines: Impedance / Dotted lines: ESR YNM0025 100.00 Z (Ω) 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 12 18 Size 0805 10 µF / 6.3 V Solid lines: Impedance / Dotted lines: ESR YNM0028 100.00 Z (Ω) 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 10 µF / 16 V Solid lines: Impedance / Dotted lines: ESR YNM0027 100.00 Z (Ω) 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 13 18 Size 1210 10 µF / 25 V Solid lines: Impedance / Dotted lines: ESR YNM0028 100.00 Z (Ω) 10.00 1.00 0.10 0.01 0.00 0.01 0.10 1.00 10.00 f (MHz) 100.00 Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE 0402 0603 0805 1206 ≥ 1210 Reflow ≥ 0.1 µF ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only Reflow/Wave < 0.1 µF < 1.0 µF < 2.2 µF < 4.7 µF --- www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 14 18 TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384- 4.3 21/22 The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Any applicable method using × 10 magnification In accordance with specification Visual Inspection and Dimension Check 4.4 Capacitance (1) 4.5.1 Class 2: At 20 °C, 24 hrs after annealing Within specified tolerance f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Dissipation Factor (D.F.) (1) 4.5.2 Class 2: At 20 °C, 24 hrs after annealing In accordance with specification f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Insulation Resistance 4.5.3 At Ur (DC) for 1 minute In accordance with specification Temperature Characteristic 4.6 <General purpose series> Class 2: Between minimum and maximum temperature X5R: -55 °C to +85 °C Normal Temperature: 20 °C ∆C/C Class 2: X5R: ±15% <High Capacitance series> ∆C/C Class 2: X5R: ±15% Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N NOTE 1. The figure indicates typical inspection. Please refer to individual specifications. www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V TEST TEST METHOD PROCEDURE REQUIREMENTS Bond Strength of Plating on End Face IEC 6038421/22 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm <General purpose series> 4.8 15 18 ∆C/C Class2: X5R: ±10% <High Capacitance series> ∆C/C Class2: X5R: ±10% Resistance to Soldering Heat 4.9 Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute <General purpose series> Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Solder bath temperature: 260 ±5 °C Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours ∆C/C Class2: X5R: ±10% <High Capacitance series> ∆C/C Class2: X5R: ±10% D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 °C to 140 °C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination Test conditions for lead-free containing solder alloy Temperature: 235 ±5 °C Dipping time: 2 ±0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for lead-free containing solder alloy Temperature: 245 ±5 °C Dipping time: 3 ±0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R TEST TEST METHOD PROCEDURE REQUIREMENTS Rapid Change of Temperature IEC 6038421/22 Preconditioning; 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature No visual damage 4.11 4 V to 50 V 16 18 <General purpose series> ∆C/C 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Class2: X5R: ±15% <High Capacitance series> Recovery time 24 ±2 hours ∆C/C Class2: X5R: ±15% D.F. meet initial specified value Rins meet initial specified value Damp Heat with Ur Load 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Damp heat test: 500 ±12 hours at 40 ±2 °C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirements shall be met. No visual damage after recovery <General purpose series> ∆C/C Class2: X5R: ±15% D.F. Class2: X5R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X5R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less <High Capacitance series> ∆C/C Class2: X5R: ±20% D.F. Class2: X5R: 2 x initial value max Rins Class2: X5R: 500 MΩ or Rins x Cr ≥ 25s whichever is less www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC 6038421/22 1. Preconditioning, class 2 only: No visual damage 4.14 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Endurance test: Temperature: X5R: 85 °C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. Applied 1.5 x Ur for high cap. product. 4. Recovery time: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirements shall be met. 4 V to 50 V 17 18 <General purpose series> ∆C/C Class2: X5R: ±15% D.F. Class2: X5R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X5R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s whichever is less <High Capacitance series> ∆C/C Class 2: X5R: ±20% D.F. Class 2: X5R: 2 x initial value max Rins Class 2: X5R: 1,000 MΩ or Rins x Cr ≥ 50s whichever is less Voltage Proof IEC 60384-1 4.6 Specified stress voltage applied for 1 minute Ur ≤ 100 V: series applied 2.5 Ur 100 V < Ur ≤ 200 V series applied (1.5 Ur + 100) 200 V < Ur ≤ 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover www.yageo.com Feb 10, 2012 V.12 Product specification Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 18 18 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 12 Feb 10, 2012 - - Product range updated Version 11 Oct 21, 2011 - - Product range updated Version 10 Jun 21, 2011 - - Product range updated Version 9 Mar 23, 2011 - - Product range updated Version 8 Jan 25, 2011 - - Rated voltage of 0201 extend to 50V Version 7 Jan 05, 2011 - - Product range updated Version 6 Jul 27, 2010 - - Dimension on 0603 and 1206 case size updated Version 5 Apr 21, 2010 - - The statement of "Halogen free" on the cover added - Dimension updated Version 4 Jan 13, 2010 - - Thickness updated Version 3 Aug 17, 2009 - - Dimension updated Version 2 Jun 09, 2009 - - Ordering code updated Version 1 May 15, 2009 - - Product range updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X5R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: UP-X5R_X7R_HighCaps_6.3to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen free compliant" added - Test method and procedure updated www.yageo.com Feb 10, 2012 V.12