CD63__15A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A D F E B F 7 6 5 4 G S 1 2 3 M F "K" (2) "J" (3) TM POW-R-BLOK Dual SCR Isolated Module Up to 160 Amperes & 1600 Volts R N C P Q H CD63__15A Dual SCR Isolated TM POW-R-BLOK Module Up to 160 Amperes & 1600 Volts 4 5 3 - + ~1 2 6 7 CONNECTION DIAGRAM Features: TElectrically Isolated Heatsinking TDBC Alumina (Al2O3) Insulator T Glass Passivated Chips T Metal Baseplate T Low Thermal Impedance for Improved Current Capability T Quick Connect Gate Terminal with Provision for Keyed Mating Plug T UL Recognized (E78240) CD63_15A Outline Dimensions Dimension Inches Millimeters A 3.70 94 B 1.38 35 C 1.18 30 D 3.15 80 E 0.67 17 F 0.91 23 G 0.57 14.5 H 0.35 9 J M6 M6 K 0.26 6.5 M .020 5 N 0.28 7 P 1.10 28 Q 1.14 29 R 0.03 0.8 S 0.11 2.8 Benefits: Ordering Information: Example: Select the complete nine digit module part number from the table below. Example: CD631615A is a 1600Volt, 150 Ampere Dual SCR Isolated TM POW-R-BLOK Module Type CD63 Voltage Volts (x100) Current Amperes (x 10) 08 12 14 16 15 16 TNo Additional Insulation Components Required TEasy Installation TNo Clamping Components Required T Reduce Engineering Time Applications: TBridge Circuits TAC & DC Motor Drives TBattery Supplies TPower Supplies TLarge IGBT Circuit Front Ends TLighting Control THeat & Temperature Control TWelders Note: Dimensions are for reference only. 05/09/2000 CD63__ 15A TM POW-R-BLOK Dual SCR Isolated Module Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Up to 160 Amperes & 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180° Conduction, TC=85°C IT(RMS) 250 A 180° Conduction, TC=85°C (AC Switch) IT(RMS) 355 A 180° Conduction, TC=85°C 180° Conduction, TC=90°C IT(AV) 160 A IT(AV) 150 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 4300 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 5100 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 4100 50 Hz, No VRRM reapplied, Tj=125°C ITSM 4870 A A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 3250 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 3150 A 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 2650 A ITSM 2550 RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle 2 A 2 8.3 ms, 100% VRRM reapplied, Tj=125°C It 76,700 A sec 8.3 ms, No VRRM reapplied, Tj=125°C It 2 108,000 A sec 10 ms, 100% VRRM reapplied, Tj=125°C It 2 84,000 A sec 10 ms, No VRRM reapplied, Tj=125°C It 2 119,000 A sec Tj=125°C, VD= VDRM (Rated), ITM=400A , IG=0.5 A, Tr < 0.25ms, tp > 6ms di/dt 300 A/ms Peak Gate Power Dissipation Tp < 5 ms, Tj = 125C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125C PG(AV) 3 W A Maximum Rate-of-Rise of On-State Current, Non Repetitive 2 2 2 Peak Forward Gate Current Tp < 5 ms, Tj = 125C IGFM 3 Peak Reverse Gate Voltage Tp < 5 ms, Tj = 125C VGRM 10 V Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +150 °C 35 - 50 4-6 35 - 50 4-6 200 in.-Lb. Nm in.-Lb. Nm g 7.1 oz. 3500 V Max. Mounting Torque, M6 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Vrms 05/09/2000 CD63__15A TM POW-R-BLOK Dual SCR Isolated Module Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Up to 160 Amperes & 1600 Volts Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1600V, TJ=125°C 50 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1600V, TJ=125°C 50 mA Peak On-State Voltage Min. Max. Units VTM ITM=500A 1.54 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.80 1.67 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125°C, I = πIT(AV) to ITSM 0.98 1.38 V mΩ TJ = 125°C, I = 15% x IT(AV) to ITSM VTM Coefficients, Full Range A= B= C= D= VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt 0.5926 -1.10E-03 1.03E-03 0.0241 dV/dt Exponential to 2/3 VDRM Tj=125°C, Gate Open Turn-On Time (Typical) ton ITM = 300A, VD = 2/3 VDRM dIg/dt =1A/ms 3 (Typical) ms Turn-Off Time (Typical) t off TJ = 125°C, I T= 300A, Rgk = 100Ω Vr = 50V, -dI/dt=15 A/ms Re-Applied dV/dt = 20V/ms, Linear to 2/3 VDRM 50 - 200 (Typical) ms Gate Trigger Current IGT Tj= -40°C, VD=6V, Ra=1Ω, Resistive Load 270 mA Tj= 25°C, VD=6V, Ra=1Ω, Resistive Load Tj=125°C, VD=6V, Ra=1Ω, Resistive Load 150 mA 80 mA Tj= -40°C, VD=6V, Ra=1Ω, Resistive Load 4.0 Volts Tj= 25°C, VD=6V, Ra=1Ω, Resistive Load Tj=125°C, VD=6V, Ra=1Ω, Resistive Load 2.5 Volts 1.7 Volts Gate Trigger Voltage VGT 1000 V/ms Non-Triggering Gate Voltage VGDM Tj=125°C, VD=VDRM 0.30 Volts Non-Triggering Gate Current IGDM Tj=125°C, VD=VDRM 10 mA Thermal Characteristics Characteristics Symbol Max. Units 0.08 0.16 °C/W °C/W Thermal Resistance, Junction to Case DC Operation RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZQJ-C ZQJ-C= K1 (1-exp(-t/t1)) K1 =5.45334E-3 t1 =4.511E-5 + K2 (1-exp(-t/t2)) + K3 (1-exp(-t/t3)) K3 = -3.5154E+1 t3 =1.3311E-1 (Per Junction) Thermal Resistance, Case to Sink Lubricated RΘC-S + K4 (1-exp(-t/t4)) Per Module K2 =3.8509E+1 t2 =1.3558E-1 K4 = -3.20 t4=1.5936E-1 0.05 °C/W 05/09/2000 CD63__15A Dual SCR Module Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Up to 160 Amperes & 1600 Volts Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case) 0.180 5 0.140 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 0.160 4 3 2 1 0.120 0.100 0.080 0.060 0.040 0.020 0 10 100 1000 0.000 0.01 10000 0.1 1 Instantaneous On-State Current - Itm - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 240 120° 125 180° 90° Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per SCR - Watts_ 220 200 60° 180 160 30° 15° 140 120 100 80 60 180 0 40 360 CONDUCTION ANGLE 20 120 115 180 0 110 360 CONDUCTION ANGLE 105 15° 100 30° 60° 95 90° 90 180° 120° 85 0 0 20 40 60 80 100 120 140 160 180 0 20 40 Average On-State Current - It(av) - Amperes 60 80 100 120 140 160 180 Average On-State Current - It(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 125 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 270° 360° 120 Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per SCR - Watts_ 10 Time - t - Seconds 180° 120° 90° 60° 15° 30° 180 0 360 115 100 15° 95 30° 60° 90 90° 120° 85 180° 270° 75 0 20 40 60 80 100 120 140 160 180 200 220 Average On-State Current - It(av) - Amperes 240 260 360 CONDUCTION ANGLE 105 80 CONDUCTION ANGLE 180 0 110 0 20 40 60 80 100 120 140 160 180 200 360° 220 240 260 Average On-State Current - It(av) - Amperes 05/09/2000