HIGH STABILITY THROUGH HOLE CLOCK OSCILLATORS SERIES CX21, CX22, AND CX23 FEATURES COST EFFECTIVE MPU CLOCK TOLERANCE AND STABILITY TO ± 5 PPM CUSTOM SPECIFICATIONS SPECIFICATIONS FREQUENCY RANGE 1.00 MHz TO 100.00 MHz FREQUENCY STABILITY OVER TEMPERATURE RANGE (REF. TO25°C) ±5 PPM TO ±50 PPM MAX AT VCC = +5.0 VDC (SEE TABLE 1) OPERATING TEMPERATURE RANGE 0°C TO +50°C (NARROW) 0°C TO +70°C (STANDARD) -40°C TO +85°C (EXTENDED) AT VCC = +5.0VDC AND STANDARD LOAD (SEE TABLE 1) STORAGE TEMPERATURE RANGE -40°C TO +85°C AGING CHARACTERISTICS ±4 PPM MAX FOR THE FIRST YEAR AND ±20 PPM MAX FOR 10 YEARS OUTPUT WAVEFORM OPTIONS TTL, HCMOS, OR ACMOS SYMMETRY NORMAL: 40/60% TIGHT: 45/55% (OPTION) FREQUENCY STABILITY OVER LOAD VARIATION ±3 PPM MAX FOR 10% VARIATION AT VCC = +5.0 VDC AT 25°C SUPPLY VOLTAGE +5.0 VDC ±5% (3.3 VDC AVAILABLE) ENABLE/DISABLE FUNCTION CONTROL PIN 1: HIGH OR OPEN (+2.0 VDC MIN)OUTPUT PIN 8: ENABLED CONTROL PIN 1: LOW OR GROUND (+0.8 VDC MIN)OUTPUT PIN 8: DISABLED (HIGH Z) FREQUENCY STABILITY OVER SUPPLY VOLTAGE VARIATION ±5 PPM MAX FOR 5% VARIATION AT VCC = +5.0 VDC AND STANDARD LOAD AT 25°C SUPPLY CURRENT 50 mA MAX AT VCC = +5.0 VDC AND STANDARD LOAD AT 25°C OUTLINE DRAWING TEMPERATURE RANGE DESIGNATIONS Scale none Dimension in mm inch TABLE 1 6.35 ± 0.5 0.79 ± .08 PIN CONNECTION .031 ± .003 .300 ± .020 COLORED DOT INDICATES PIN 1 LOCATION .250 ± .020 7.62 ± 0.5 MARKING AREA CO2 PIN 0.45 ± .076 DIA .018 ± .003 DIA 1 N/C 4 GROUND 5 OUTPUT 8 VCC 7.62 ± .127 .300 ± .005 12.50 MAX .492 MAX .300 ± .005 7.62 ± .127 CE2 PIN 4 PIN 1 PIN 8 FUNCTION PIN FUNCTION 1 E/D 4 GROUND 5 OUTPUT 8 VCC PIN 5 12.50 ± 0.5 .492 ± .020 PHASE NOISE CHARACTERISTICS 0 TEMPERATURE STABILITY A 0°C TO +50°C ± 5 PPM B 0°C TO +50°C ± 10 PPM C 0°C TO +50°C ± 15 PPM D 0°C TO +50°C ± 20 PPM E 0°C TO +50°C ± 25 PPM F 0°C TO +70°C ± 10 PPM G 0°C TO +70°C ± 15 PPM H 0°C TO +70°C ± 20 PPM I 0°C TO +70°C ± 25 PPM J 0°C TO +70°C ± 35 PPM K 0°C TO +70°C ± 50 PPM L -40°C TO +85°C ± 20 PPM M -40°C TO +85°C ± 25 PPM O -40°C TO +85°C ± 30 PPM P -40°C TO +85°C ± 35 PPM Q -40°C TO +85°C ± 50 PPM MECHANICAL SHOCK IEC-68-2-27 TEST EA, 30g FOR 18 ms HALFSINE -40 dBc TEMPERATURE RANGE MECHANICAL CHARACTERISTICS -20 -60 CODE -70 -80 -95 -100 -120 -120 -140 -150 -140 -160 10 Hz 100 Hz 1 KHz 10 KHz VIBRATION IEC 68-2-6 (TEST FC) 0.35 mm, 5g, 10-2 kHz, 6 CYCLES AXIS THERMAL SHOCK IEC 68-2-14 (TEST NA), 30 min IN EACH TEMPERATURE EXTREME SEAL IEC 68-2-17 (TEST QC) SOLDERING HEAT IEC 68-2-20A MECHANICAL 14 PIN DIP, LEADED, PER OUTLINE DRAWING 100 KHz Offset from carrier PART NUMBERING SYSTEM SERIES CO2 CE2 OUTPUT 1 2 3 TTL HCMOS ACMOS CODE A THROUGH M FREQUENCY - IN MHz SYMMETRY - T (45/55%) EXAMPLE: CO22L-20.000-T HCMOS OUTPUT ±50 PPM OVER 0° C TO +70° C TIGHT SYMMETRY Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http://www.raltron.com