Series 74 Convoluted Tubing 123-100 - Type G Series 74 Helical Convoluted Tubing (MIL-T-81914) Natural or Black PFA, FEP, PTFE, Tefzel® (ETFE) or PEEK 123-100-1-1-16 B E H Jacket E = EPDM H = Hypalon® Product Series N = Neoprene V = Viton Basic No. Class 1 = Standard Wall 2 = Thin Wall * Material E = ETFE F = FEP K = PEEK *** Convolution 1 = Standard 2 = Close Color B = Black C = Natural TYPE G EXTERNAL JACKET P = PFA T = PTFE** Dash No. (Table I) JACKET TUBING A DIA B DIA LENGTH (AS SPECIFIED IN FEET) DASH FRACTIONAL NO SIZE REF 06 3/16 09 9/32 10 5/16 12 3/8 14 7/16 16 1/2 20 5/8 24 3/4 28 7/8 32 1 40 1 1/4 48 1 1/2 56 1 3/4 64 2 © 2003 Glenair, Inc. TABLE I A INSIDE DIA MIN .181 (4.6) .273 (6.9) .306 (7.8) .359 (9.1) .427 (10.8) .480 (12.2) .603 (15.3) .725 (18.4) .860 (21.8) .970 (24.6) 1.205 (30.6) 1.437 (36.5) 1.688 (42.9) 1.937 (49.2) MINIMUM BEND RADIUS B DIA MAX .460 (11.7) .554 (14.1) .590 (15.0) .650 (16.5) .711 (18.1) .790 (20.1) .910 (23.1) 1.070 (27.2) 1.213 (30.8) 1.366 (34.7) 1.679 (42.6) 1.972 (50.1) 2.222 (56.4) 2.472 (62.8) MINIMUM BEND RADIUS .50 (12.7) .75 (19.1) .75 (19.1) .88 (22.4) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 1.75 (44.5) 1.88 (47.8) 2.25 (57.2) 2.75 (69.9) 3.25 (82.6) 3.63 (92.2) 4.25 (108.0) CAGE Codes 06324 Metric dimensions (mm) are in parentheses. * Consult factory for thin-wall, close convolution combination. ** For PTFE maximum lengths - consult factory. *** Consult factory for PEEK min/max dimensions. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] D-9