UMS CHV2242C Q-band vco based on ku-band oscillator and q-band multiplier Datasheet

CHV2242c
RoHS COMPLIANT
Q-band VCO based on Ku-band Oscillator
and Q-band Multiplier
GaAs Monolithic Microwave IC
Description
+V
Main Features
Ku-band VCO + Q-band multiplier
On chip varactor
External resonator for centre frequency
control and phase noise optimisation
Low phase noise
Auxiliary output at VCO frequency
High temperature range
On-chip self biasing
Automatic assembly oriented
Chip size 2.41 x 1.18 x 0.1 mm
BCB Layer protection
-V
F_VCO = F_out/3
ERC1
RF_out
MEDIUM Q
RESONATOR
x3
(F_out)
ERC2
V_tune
Multifunction block diagram
38,7
Output frequency (GHz)
The CHV2242c is a monolithic multifunction for
frequency generation. It integrates a Ku-band
oscillator with frequency control (VCO), a Qband frequency multiplier and buffer amplifiers.
For performance optimisation, two external
ports (ERC1 and ERC2) allow a passive
resonator coupling to the oscillator (at one third
of output frequency). On chip Schottky diode,
based on a P-HEMT, is used as varactor. All
the active devices are internally self-biased.
The circuit is manufactured with the P-HEMT
process: 0.25µm gate length, via holes through
the substrate, air bridges and electron beam
gate lithography.
It is available in chip form.
38,6
38,5
38,4
38,3
38,2
38,1
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
1
Tuning voltage (V)
Typical tuning characteristic
(Coupled to a micro-strip filter
Main Characteristics
Tamb = +25°C
Symbol
Parameter
F_out
Output centre frequency
F_vco
Oscillator frequency
F_tune
Output frequency tuning range
Pout
Min
Typ
Max
Unit
38
38.25
38.5
GHz
F_out/3
Output power
150
200
MHz
5
7
dBm
ESD Protections: Electrostatic discharge sensitive device observe handling precautions!
Ref. : DSCHV2242c6354 - 20 Dec 06
1/9
Specifications subject to change without notice
united monolithic semiconductors S.A.S.
Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
1,1
1,2
Q-band VCO
CHV2242c
Electrical Characteristics
Full temperature range, used according to section “Typical assembly and bias configuration”
Symbol
F_out
F_vco
F_tune
P_out
F_slope
V_tune
Pushing
Parameter
Min
Typ
Max
Unit
Output centre frequency
38
38.25
38.5
GHz
VCO frequency (1)
F_out/3
Frequency tuning range (at F_out) (2)
150
200
MHz
Output power
5
7
dBm
Frequency tuning slope (2)
500
MHz/V
Control voltage range
0.2 – 0.8 0 – 1.5
V
Frequency pushing vs positive supply
60
MHz/v
voltage
PN
Phase noise (given at F_out) (2)
@ 10kHz
-48
-43
dBc/Hz
@ 100kHz
-75
-70
@ 1MHz
-100
-95
+V
Positive supply voltage
4.4
4.5
4.6
V
+I
Positive supply current
110
160
mA
-V
Negative supply voltage
-4.6
-4.5
-4.4
V
-I
Negative supply current
5
8
mA
Top
Operating temperature range
-40
100
°C
(1) The centre frequency is given by the external passive resonator
(2) This characteristic depends on the resonator Q, the given performance has been
obtained by using a micro-strip filter used as resonator (see section “Proposed External
Medium Q Resonator”)
Absolute Maximum Ratings (1)
Symbol
V_tune
+V
-V
+I
-I
Tstg
(1)
Parameter
Tuning voltage
Positive supply voltage
Negative supply voltage
Positive supply current
Negative supply current
Storage temperature range
Values
2.5
5
-5
250
15
-55 to +155
Unit
V
V
V
mA
mA
°C
Operation of this device above anyone of these parameters may cause permanent damage.
Ref. : DSCHV2242c6354 - 20 Dec 06
2/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Q-band VCO
CHV2242c
Chip Mechanical Data and Pin References
Unit = µm
External chip size = 2410 x 1180 +/- 35
Chip thickness = 100 +/- 10
RF Pads (1, 2,11) = 83 x 86
DC/IF Pads = 98 x 95
Pin number
Pin name
1
2
3, 7
4, 6
5, 8
ERC2
RF_out
9
10
11
+V
-V
V-tune
ERC1
No Number
Ref. : DSCHV2242c6354 - 20 Dec 06
Description
External Resonator Coupling Port 2
RF output at 38GHz
NC
Positive supply voltage
Negative supply voltage
GND (optional)
Tuning voltage input port
External Resonator Coupling Port 1
Ground : should not be bonded. If required, please
ask for more information.
3/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Q-band VCO
CHV2242c
Typical Assembly and Bias Configuration
This drawing shows an example of assembly and bias configuration. All the
transistors are internally self-biased. The positive and negative voltages can be
respectively connected together (see drawing) according to the recommended
values given in the electrical characteristics table. Due to the high value of
frequency sensitivity versus tuning voltage (around 500MHz/V), the signal
applied to V_tune port must have very low level of noise.
For the RF pads the equivalent wire bonding inductance (diameter=25µm) has to
be according to the following recommendation.
Port
ERC1 (11)
ERC2 (1)
RF_out (2)
Equivalent inductance
(nH)
L_erc1 = 0.4
L_erc2 = 0.4
L_out = 0.28
Approximated wire
length (mm)
0.5
0.5
0.35
For a micro-strip configuration a hole in the substrate is recommended for chip
assembly.
Ref. : DSCHV2242c6354 - 20 Dec 06
4/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Q-band VCO
CHV2242c
Proposed External Medium Q Resonator
This resonator can be used for 77GHz FMCW-based radar applications.
The chip has been especially designed to be coupled to a medium Q resonator
printed on temperature compensated soft substrate. The resonance is given by
three half wave coupled lines. The length of the coupler (L) gives the centre
frequency and the space between the coupled lines (s) gives the bandwidth. For
easy connection and phase considerations half wave lines are at the input and
output of the filter. All the recommended dimensions are given in the following
drawing.
The main substrate characteristics are the following (ROGERS R03003)
Dielectric
constant
3
Thickness
250µm
Dissipation
factor (10GHz)
0.0013
Thermal
coefficient
13 ppm/°C
The typical resonator length (L) is 7.35mm for a coupling value (s) of 0.4mm and
for a frequency of 38.25GHz. However this L value should have to be adjusted
depending on the final chip environment.
Other possibility is ARLON/CLTE substrate. (L is 7.27mm for s=0.4mm)
Ref. : DSCHV2242c6354 - 20 Dec 06
5/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Q-band VCO
CHV2242c
Proposed External Medium Q Resonator
The following information is about the S parameter of the resonator (plot for S21 and table
for the four parameters). These values don’t include the wire bonding equivalent inductance
L_erc1 and L_erc2 given in section “Typical Assembly and Bias Configuration”.
S21 of the proposed external resonator
S parameters of the proposed external resonator
Ref. : DSCHV2242c6354 - 20 Dec 06
6/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Q-band VCO
CHV2242c
External Resonator Coupling Information
The external resonator has to be an equivalent band-pass filter with 180°
insertion phase at resonance (oscillation) frequency. However, this filter must be
compatible to the loop parameters of the oscillator (between ERC ports) in order
to obtain the oscillation conditions and to avoid parasitic oscillations. The
following information concerns the S parameters of the chip (plots for S21 and
tables for the four parameters), reference ports are ERC1 and ERC2. These
values don’t include the wire bonding equivalent inductance L_erc1 and L_erc2
given in section “Typical Assembly and Bias Configuration”. For more detail and
for a wider band analysis a complete S parameter file is available on request.
MMIC S21 for V_tune=0V (between ERC1 and ERC2)
freq
11
11.25
11.5
11.75
12
12.25
12.5
12.75
13
13.25
13.5
13.75
14
14..25
dB(S11)
-4.76
-5.98
-7.56
-8.71
-8.22
-6.62
-5.06
-3.88
-3.04
-2.45
-2.01
-1.67
-1.46
-1.28
Phase(S11)
-120.8
-143.0
-172.9
147.5
105.0
71.3
47.3
29.9
16.5
6.0
-2.6
-9.7
-15.9
-21.2
Ref. : DSCHV2242c6354 - 20 Dec 06
dB(S21)
6.28
6.73
7.035
7.10
6.86
6.34
5.63
4.80
3.95
3.10
2.30
1.54
0.82
0.16
Phase(S21)
-136.9
-152.2
-168.3
175.1
158.7
143.4
129.5
117.3
106.6
97.1
88.6
81.0
73.9
67.4
dB(S12)
-24.28
-23.66
-23.17
-22.94
-23.01
-23.36
-23.91
-24.58
-25.23
-25.97
-26.62
-27.23
-27.80
-28.31
7/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Phase(S12)
135.4
120.9
105.6
89.7
74.0
59.3
46.1
34.4
24.2
15.3
7.3
0.2
-6.4
-12.6
dB(S22)
-10.50
-10.96
-11.18
-10.95
-10.34
-9.64
-9.06
-8.67
-8.43
-8.31
-8.28
-8.30
-8.37
-8.47
Phase(S22)
-39.2
-36.4
-31.7
-26.5
-23.1
-22.4
-23.7
-25.8
-28.2
-30.7
-32.9
-35.0
-36.8
-38.5
Specifications subject to change without notice
Q-band VCO
CHV2242c
MMIC S21 for V_tune=2V (between ERC1 and ERC2)
freq
11
11.25
11.5
11.75
12
12.25
12.5
12.75
13
13.25
13.5
13.75
14
14..25
dB(S11)
-6.2
-5.2
-5
-5.5
-7.1
-10.4
-18.4
-16.1
-9.1
-5.8
-4.1
-3.0
-2.3
-1.9
Phase(S11)
-16.0
-34.1
-50.3
-66.5
-84.5
-107.1
-151.9
80.0
45.0
25.9
11.9
1.2
-7.5
-14.5
Ref. : DSCHV2242c6354 - 20 Dec 06
dB(S21)
1.66
2.88
4.07
5.26
6.39
7.34
7.91
7.94
7.46
6.63
5.66
4.66
3.7
2.81
Phase(S21)
-89.1
-103.6
-117.8
-132.6
-148.6
-166.6
173.9
153.9
135.3
119.1
105.4
93.9
84.1
75.5
dB(S12)
-28.9
-27.5
-26.1
-24.8
-23.5
-22.4
-21.6
-21.4
-21.8
-22.4
-23.3
-24.1
-24.9
-25.7
8/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Phase(S12)
-176.9
169.5
156.0
142.0
126.6
109.4
90.4
71.1
53.0
37.3
24.1
13.1
3.7
-4.5
dB(S22)
-9.16
-9.86
-10.82
-12.14
-13.76
-14.75
-13.45
-11.18
-9.42
-8.39
-7.87
-7.64
-7.59
-7.64
Phase(S22)
50.9
-52.7
-53.7
-52.6
-46.1
-30.0
-12.4
-6.7
-9.6
-15.0
-20.6
-25.5
-29.6
-33
Specifications subject to change without notice
Q-band VCO
CHV2242c
Ordering Information
Chip form:
CHV2242c98F/00
Information furnished is believed to be accurate and reliable. However united monolithic semiconductors
S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of
patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of united monolithic semiconductors S.A.S.. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied. United monolithic semiconductors S.A.S. products are not authorised for use
as critical components in life support devices or systems without express written approval from united monolithic
semiconductors S.A.S.
Ref. : DSCHV2242c6354 - 20 Dec 06
9/9
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09
Specifications subject to change without notice
Similar pages