UMS CHV2411A Fully integrated hbt k-band vco Datasheet

CHV2411aQDG
RoHS COMPLIANT
Fully Integrated HBT K-band VCO
GaAs Monolithic Microwave IC
In QFN package
Description
The CHV2411a-QDG is a monolithic
multifunction for frequency generation. It
integrates a X-band “push-push” oscillator with
frequency control (VCO) thanks to basecollector diodes, used as varactors, a K-band
buffer amplifiers and a divider by 8. The VCO is
fully integrated on HBT process. All the active
devices are internally self biased.
The circuit is fully integrated on InGaP HBT
process: 2µm emitter length, via holes through
the substrate and high Q passive elements.
The chip is delivered in a 24 Leads RoHS
compliant QFN4x4 package.
Main Features
K-band VCO+K-band buffers+Prescalar/8
Fully integrated VCO (no need for external
Resonator
Low phase noise
High temperature range
High frequency stability
On chip self biased devices
Standard SMD package : 24L-QFN4x4
Main Characteristics
Symbol
Parameter
F_out
Specified output frequency range
F_vco
Oscillator frequency
IF_out
Pout
Min
24
Typ
Max
24.125
24.25
F_out/2
Output Intermediate frequency
Output power at F_out
13
PFI
Output power at Intermediate frequency (IF)
-3
PN
SSB Phase Noise @ F_out @ 100 kHz
Unit
GHz
GHz
F_out/16
GHz
16
dBm
0
-90
dBm
-80
dBc/Hz
ESD Protection : Electrostatic discharge sensitive device. Observe handling precautions !
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
1/10
Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France
Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K-band VCO
CHV2411aQDG
Electrical Characteristics
Full temperature range
VCO & buffer Part
Symbol
F_out
Parameters
Output Frequency range (Operating band)
Min
24
F_vco
V_Tune
VCO frequency
Voltage Tuning range
Tuning sensitivity
Frequency drift rate
1
250
H1
H3
H4
PN
Typ
Unit
GHz
6
725
V
MHz/V
MHz/°C
-20
-40
-20
-80
dBc
dBc
dBc
dBc/Hz
F_out/2
400
5
Harmonics ½ F_out
Harmonics 3/2 F_out
Harmonics 2 F_out
SSB Phase Noise given @ F_out @ 100 KHz
Main Output (RF_Out) VSWR
Pulling into 2:1 VSWR for all phases
Pushing @ within the V_tune range
Output Power on RF_out port
Positive supply current
P_out
Max
24.25
-90
2:1
13
16
140
Min
Typ
F_out/16
-3
0
80
8
MHz
250
19
170
MHz/V
dBm
mA
Max
Unit
GHz
Prescalar Part
Symbol
IF_out
Parameters
IF Output Frequency
Output Power
Positive supply current
Prescalar Output (IF) VSWR
dBm
mA
110
2:1
General
Symbol
VB,V1,VB1,V2,V
B2,VD
Parameters
Positive supply voltage
+I
(IB1+IB2+I1+I2)
Total Positive supply current
Top
Operating temperature range
Min
Typ
5
Max
Unit
V
220
280
mA
+100
°C
-40
All the parameters are specified between 1V and 6V of Tuning Voltage
Remark :
The minimum and maximum values take into account the spread due to the operating temperature
and process spread.
These performance has been obtained with the chip in QFN package assembled on the
recommended boards (ref. 96348 B) described in this document. These performances are highly
dependent on this environment.
Absolute Maximum Ratings (1)
Symbol
V_tune
+V
+ID
+IB1 / +IB2
+I1 / +I2
+IB
Parameters
Positive Tuning voltage
Positive supply voltage
Positive supply current (Prescalar)
Positive supply current (buffers 2 & 3)
Positive supply current (VCO+ buffer 1)
Positive supply current (prescalar‘s buffer)
Values
Unit
10
6
120
50 / 55
35 / 50
15
V
V
mA
mA
mA
mA
Top
Operating temperature range (2)
-40 to +100
°C
Tstg
Storage temperature range
-55 to +125
°C
(1) Operation of this device above anyone of these parameters may cause permanent damage. Duration < 1s
(2) temperature of the back side of the QFN package
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
2/10
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K-band VCO
CHV2411aQDG
Typical QFN measurements on board 95791 (QFN plan)
Remark : The temperature mentioned below is taken at the back side of the QFN package.
Sensitivity versus Vtune
T=100°C
T=25°C
T= - 40°C
Output Frequency versus Vtune
T= - 40°C
T=25°C
T=100°C
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
3/10
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K-band VCO
CHV2411aQDG
Output Power @24GHz versus Vtune
T= - 40°C
T=25°C
T=100°C
IF Output Power versus Vtune
T=100°C
T=25°C
T= - 40°C
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
4/10
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K-band VCO
CHV2411aQDG
Phase
vsversus
Tuning Vtune
Voltage
PhaseNoise
Noise
@ 10 kHz from Carrier
T=25°C
@ 100 kHz from Carrier
Phase Noise
Offset
frequencyfrom
fromcarrier
carrier
Phase
Noiseversus
vs Offset
frequency
0,00
Over Operating Tuning Range
-10,00
-20,00
-30,00
Phase Noise (dBc/Hz)
-40,00
-50,00
-60,00
- 40°C
-70,00
100°C
-80,00
-90,00
-100,00
-110,00
-120,00
-130,00
1,00
10,00
100,00
1000,00
Offset Frequency from Carrier (kHz)
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
5/10
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K-band VCO
CHV2411aQDG
QFN Outline
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
6/10
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K-band VCO
CHV2411aQDG
QFN Pin-out description
Pin number
Pin name
Symbol Name
Description
15,17
GND
2
P
IF_out
4
VT
V_Tune
Frequency Tuning Port
5,11,13,20,21,23
VB, V1, VB1, VB2,V2, VD
+V
Positive supply voltage
5
VB
Ground
IF output at 1.5 GHz
Positive supply voltage of 12 GHz prescalar’s buffer
st
Positive supply voltage of the VCO core+1 stage of the
24GHZ buffers
nd
rd
Positive supply voltage of the 2 & 3 stages of the
24GHZ buffers
11,21
V1,V2
13
VB1
20
VB2
Positive supply voltage of the 4 stages of the 24GHZ
buffers
23
VD
Positive supply voltage of the Prescalar
16
RF
F_out
2
P
F_out/16
th
1,3,6,7,8,9,10,12,14,18,
19,22,24
RF output at 24 GHz
Prescalar output at 1.5 GHz
Nc
Not connected
External Components and bias configuration (recommended)
Important: Need for a capacitor on the prescalar output port as a DC block (C2).
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
7/10
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K-band VCO
CHV2411aQDG
Recommended Test Fixture (Ref. 96348 B) for measurements over
Temperature Range
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
8/10
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
K-band VCO
CHV2411aQDG
ESD sensitivity
Norm
MIL-STD-1686C
ESD STM5.1-1998
Value
HBM Class 1 (<1000V)
HBM Class 0 (<250V)
Package Information
Parameter
Package body material
Lead finish
MSL Rating
RoHS-compliant Low stress Injection Molded Plastic
100% matte Sn
MSL1
Recommended surface mount package assembly
(see UMS AN0017)
For volume production the SMD type package can be treated as a standard surface mount component (please refer to the
IPC/JEDEC J-STD-020C standard or equivalent). The assembly on the motherboard can be performed using a standard
assembly process (e.g. stencil solder printing, standard pick-and-place machinery, and solder reflow oven). However, caution
should be taken to perform a good and reliable contact over the whole pad area.
MAXIMUM RECOMMENDED REFLOW PROFILE for LEADFREE SMT ASSEMBLY PRODUCTS
300
280
255
260
240
217
220
Temperature (°C)
200
180
150
160
140
120
Maximum Ramp up rate : 3°C / second
100
30s Max
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
Time (s)
Attention:
The solder thickness after reflow should be typical 50µm [2 mils] and the lateral alignment between the package and the
motherboard should be within 50µm [2 mils].
It is important for the performance of the product that the whole overlapping area between the motherboard and package pads
is connected. Voids or other improper connections, in particular, between the ground pads on motherboard and package will
lead to a deterioration of the RF performance and the heat dissipation. The latter effect can reduce drastically reliability and
lifetime of the product.
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
9/10
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
K-band VCO
CHV2411aQDG
Ordering Information
24L-QFN4x4 Lead Free Package :
Stick: XY=20
CHV2411aQDG/XY
Tape and reel: XY=21
Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors
S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of
patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use
as critical components in life support devices or systems without express written approval from United
Monolithic Semiconductors S.A.S.
Ref. : DSCHV2411aQDG7254 - 11 Sept 07
10/10
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09
Specifications subject to change without notice
Similar pages