CITIZEN CL-L234A-MC18L1-C Led lamp Datasheet

DATA SHEET
1/10
1. Scope of Application
This data sheet is applied to the chip type LED lamp , model CL-L234A-MC18L1-C
2. Part code
CL-L234A-MC18L1-C
Series
L234 : White power LED for general lighting.
Special specifications
M : General Color Rendering Index Typ. 85 Type.
Watt class
C18 : 18 watt package.
Lighting color
L1 : Compliance with ANSI C78.377-2008,
3-step MacAdam ellipse
Correlated Color Temperature 3000K.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
2/10
3. Outline drawing
Unit : mm
Tolerances unless otherwise specified : ±0.3
Protection device
(Tc Measurement Point)
6.95
8.9
Anode
Marking2
Marking1
×6
×6
×6
×6
×6
×6
×6
×6
×6
×6
×6
×6
Cathode
It has a protection device built in as a
protection circuit against static electricity.
Marking1 : Serial No.
Marking2 : M L1 C
Color:L1
e.g. Ra:Typ85
4. Performance
( 1 ) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Power Dissipation
PD
29.4
W
Forward Current
IF
720
mA
Forward Pulse Current
IFP
750
mA
Reverse Current
IR
1
mA
Operating Temperature
TOP
-30 ~ +85
C
Storage Temperature
TST
-40 ~ +100
C
*1
150
Tj Max
Junction Temperature
C
*2
*1 Forward Current : Duty<=1/10 , Pulse Width<=10msec
*2 D.C. Current : Tj = Tc + Rj-c × PD
Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / One-Pulse) × Duty
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
( 2 ) Electro-optical Characteristics
Parameter
Symbol Condition
3/10
( Tc=25 C )
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF=480mA
35.8
38.2
43.2
V
Luminous Flux
Φv
IF=480mA
1006
1183
-
lm
General Color
Rendering Index
Ra
IF=480mA
80
85
-
-
Thermal Resistance
Rj-c
Junction-case
-
2.4
-
C/W
Chromaticity coordinates ( Condition : IF=480mA ,Tc=25 C )
Color rank
Center
L1
x
y
0.4338
0.4030
Oval parameter
a
0.00834
b
0.00408
θ°
53.17
Reference (ANSI C78.377)
Color rank
x
Center
0.4338
a
0.4562
L1
b
0.4299
c
0.4147
d
0.4373
y
0.4030
0.4260
0.4165
0.3814
0.3893
(3045K)
*Color region stay within MacAdam "3-step" ellipse from the chromaticity center.
*The chromaticity center refers to ANSI C78.377:2008.
Please refer to ANSI C78.377 for the chromaticity center.
*θ is the angle between the major axis of the ellipse and the x-axis,
and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)
x-y chart-CIE1931
0.43
3400K
3200K
3000K
0.42
Color region
y
0.41
Color region
(ANSI)
0.40
0.39
2800K
0.38
0.41
0.42
0.43
0.44
0.45
0.46
x
Note: The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.005.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
4/10
5. Characteristics
・Forward Current vs. Forward Voltage
・Forward Current vs. Relative Luminous Flux
Tc=25C
Relative Luminous Flux [a.u.]
42.0
VF [V]
40.0
38.0
36.0
34.0
32.0
0
Tc=25C
140%
120%
100%
80%
60%
40%
20%
0%
0
100 200 300 400 500 600 700
100 200 300 400 500 600 700
IF [mA]
IF [mA]
・Forward Current vs. Chromaticity Coordinate
Tc=25C
0.020
0.015
0.010
Δx
0.015
Δy
0.010
0.005
0.000
-0.005
-0.005
-0.015
-0.015
-0.020
-0.020
400
600
800
Δy
0.000
-0.010
200
Δx
0.005
-0.010
0
IF=480mA
0.020
Δx, Δy
Δx, Δy
・Case Temperature vs. Chromaticity Coordinate
0
20
40
60
80
100
Tc [C]
IF [mA]
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
・Case Temperature vs. Forward Voltage
5/10
・Case Temperature vs. Relative Luminous Flux
IF=480mA
IF=480mA
120%
Relative Luminous Flux [a.u.]
40.0
100%
VF[V]
38.0
36.0
34.0
32.0
0
20
40
60
80
80%
60%
40%
20%
0%
0
100
20
700
600
IF[mA]
500
400
300
200
100
0
50
75
80
100
・Spectrum
Relative Emission Intensity [a.u.]
・Case Temperature vs. Allowable Forward Current
25
60
Tc [C]
Tc [C]
0
40
100
125
150
Tc=25C,IF=480mA
120%
100%
80%
60%
40%
20%
0%
350
450
550
650
750
850
λ [nm]
Tc [C]
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
6/10
6. Reliability
(1) Details of the tests
Test Item
Continuous Operation Test
Test Condition
Ta=25 C, IF=480 mA× 1000 hours(with Al-fin)
Ta=80 C, Tj≒120 C, IF=480 mA× 1000 hours(with Al-fin)
Low Temperature Storage Test -40 C × 1000 hours
High Temperature Storage Test 100 C × 1000 hours
Moisture-proof Test
Thermal Shock Test
60 C, 90 %RH for 1000 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2) Judgment Criteria of Failure for Reliability Test
(Ta=25 C)
Measuring Item
Symbol
Measuring Condition
Judgment Criteria for Failure
Forward Voltage
VF
Total Luminous Flux
Φv
IF=480mA
IF=480mA
> U × 1.1
< S × 0.85
U defines the upper limit of the specified characteristics. S defines the initial value.
Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
returned to the normal ambient conditions after the completion of each test.
CL-L221-C14L1 reliability test results will be used for CL-L234A-MC18L1-C.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
7/10
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a five-tier tray which contain 40 pieces each. The set of six
trays is banded together with two rubber bands.
(Smallest packing unit: 200 pieces)
A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 × 210 × 14.6mm / Materials: Electrically conductive PS)
< Packing figure >
14.6
14.6
210
310
Product 40pcs/tray
< Example of indication label >
CUSTOMER
TYPE
CL-L234A-MC18L1-C
xxx
P.NO
LOT No 03D001
200 pcs.
Q'ty
---(1)
---(2)
---(3)
---(4)
CITIZEN ELECTRONICS
1. TYPE
2. P.No. (Cutomer's P/N)
e.g. CL-L234A-MC18L1-C
e.g. xxx
3. Lot No.
e.g. 03D001
- First letter: Last digit of the year
e.g. 0 : year 2010
- Second letter: Production month
e.g. 3 : Mar
Note: October, November and December are designated
PASS
by X, Y and Z, respectively.
- Third letter: CE's control number
4. Quantity
e.g. D001
e.g. 240 pieces
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
8/10
8. Precautions
1. Avoid the application of any stress to the resin portion.
2. Avoid any contact by a sharp metal nail or other materials with the resin portion.
Resin portion (Shaded area)
3. This product should be secured firmly by fastening an M3 screw on both sides of the product.
Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink,
please check thoroughly.
M3screw (Insulation)
11.0mm
Spring Washer ( ≦φ6mm)
Plane washer ( ≦φ6mm)
Thermal conduction materials
(Insulation)
Outer heart sink
19.5mm
Recommended installation screw pitch
4. Insulation between the terminal section and the heat sink section of the LED is not covered
by warranty. With regard to insulation after this product has been assembled in an apparatus,
preventive action should be carried out by the customer.
5. For fixing this product to the outer heat sink, heat grease should be applied to the whole rear
surface so that the product can dissipate heat as a whole. Please pay attention to avoid product
deformation when conducting the clamping operation with heat grease in sheet form.
6. Handling of static electricity
- These products are sensitive to static electricity charge.
Please take measures to prevent any static electricity being produced such as the wearing of a
wristband or anti-static gloves when handling this product.
- All devices, equipment and machinery must be properly grounded. It is recommended that precautions
be taken against surge voltage to the equipment that mounts the LEDs.
- ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304).
- When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
- It is easy to find static-damaged LEDs by a light-on test.
<Light-on test criterion>
Judgmental criterion
Condition
IF=6mA/PKG
No-lighting in entire block making
up parallel circuit is unacceptable
L234 consists of twelve blocks.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
9/10
8. Precautions (continued)
7. Lighting at a low current
A minimum current value of lighting of all dice is 30mA.
When a minimal current is applied, LED dice may look different in their brightness due to
the individual difference of the LED element, and it is not a failed product.
8. Please be aware that this product should not come into contact with any other parts
in assembled status.
9. Drive circuit
- A constant current circuit is recommended as a drive circuit.
And when two or more LED packages are connected, the series connection
between each package is recommended.
- Please design a circuit that prevents any reverse voltage (excess current) from being
applied to this product instantaneously when the circuit is ON or OFF.
10. Heat generation
- As this product is designed with consideration of the heat release property of module,
a heat release design is required to use this product efficiently.
Please ensure that heat generation is not in excess of the absolute maximum rating.
(Refer to 4-1 Performance)
- Factors responsible for an increase in temperature include heat generation attributed to
ambient temperature conditions or power dissipation. Thus, drive conditions should be
taken into consideration, depending on ambient temperature (Ta).
11. Recommended soldering condition (This product is not adaptable to reflow process)
- Manual soldering
- Soldering shall be implemented using a soldering bit of 40W or less with a temperature
350°C or less within 3.5 seconds for one land.
(Recommended condition in a case of lead-free solder condition)
- No external force shall be applied to resin part during soldering.
- Next process of soldering should be carried out after the product has returned to ambient
- For soldering correction
- Regarding soldering correction, above conditions shall be used.
- Contacts number of soldering bit should be within twice for each terminal as a correction.
* Citizen Electronics cannot guarantee if usage exceeds this recommended conditions.
Please use it after sufficient verification is carried out on your own risk if necessary.
12. Other
- This product complies with RoHS directives.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
DATA SHEET
10/10
9. Precautions with regard to product use
1. This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
2. All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
3. CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
4. Absent a written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
5. Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
6. Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
Symbol
CITILED
Name
CL-L234A-MC18L1-C
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1726 12/11
Similar pages