Molded Mini-DYAD™ CM10 Features Small size SMT-compatible Easily formed leads Sputtered ruthenium contacts Hermetically sealed contacts Fast switching speed — up to 500Hz Wide range of available magnetic sensitivities Superior mechanical strength Enhanced for better auto placement Description Clare's Molded Mini DYAD dry reed switches are ideally suited for small switching signal applications. This switch has sputtered tuthenium contacts and an extraordinary seal strength, achieved by a patented laser sealing of the glass. In a low level or dry switching environments, both switches typically provide >1 billion operations. The switches have hermetically sealed contacts and offer a wide range of available magnetic sensitivities. In addition, the molding process provides a solid plastic outer shell. This plastic shell provides superior mechanical strength, eliminates concerns over handling glass switches, and provides an ideal solution for high speed, automated assembly environments. • • • • • • • • • Applications • Security − Proximity sensing − Smoke alarms • Automotive − Level sensor − Lamp current sensor • Relays Ordering Information A complete part number is represented by the digits to the right. For example, CM10S2030 is a MOLDED MINIDYAD™ with a minimum operate value of 10NI and a maximum of 30NI. Refer to the switch operating specification charts for available ranges. Special ranges are available upon request. CM10 S XX XX "S" for straight switch blank for SMT Maximum operate value Minimum operate value Surface Mount Molded Mini-DYAD Refer to operating characteristics table for complete part number. Standard Test Coil The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to close is called the pull-in or operate value. Part # CM10 Part # Coil definition Coil resistance Number of turns Wire size (nom. diameter) Bobbin diameter (inside coil) Winding length Molded Mini-DYADTM CM10S1015 CM10S1020 CM10S1030 CM10S1520 CM10S1525 CM10S2025 Coil - 1 NARM1 CTC01 1200Ω 5,000 0.0399mm (AWG 46) 3.96mm 10.4mm (1) Consult factory for test procedure. The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding. Test leads and their clips must be non-magnetic. The longitudinal axis of the test coil and the test switch shall be vertical. 10 to 15 10 to 20 10 to 30 15 to 20 15 to 25 20 to 25 Molded Mini-DYADTM Surface Mount Part # CM10-2308 CM10-2288 CM10-2339 CM10-2285 CM10-2289 CM10-2286 1 2 3 DS-CM10-R1 Operate Range (NI)1 Operate Range (NI)1,2,3 10 to 15 10 to 20 10 to 30 15 to 20 15 to 25 20 to 25 Tolerance = ± 1.5NI Full Blade Sensitivity Surface Mount Switches are packaged 3,000 parts per reel www.clare.com 1 Molded Mini-DYAD™ CM10 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameter Switching Voltage CM10 - Molded Mini-DYAD™ Switching Current CM10 - Molded Mini-DYAD™ Carry Current CM10 - Molded Mini-DYAD™ Switching Frequency CM10 - Molded Mini-DYAD™ Contact Resistance CM10 - Molded Mini-DYAD™ Min Typ Max Units - - 200 Volts - - 0.5 Amps - - 2 Amps - - 500 Hz - -0 100 mΩ (See detailed specifications for more information.) Specifications All parameters are at 25°C unless otherwise stated. PARAMETER Contact Ratings Operate ampere turns range Release ampere turns range Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Static Contact Resistance Contact Material Switch Specifications Insulation Resistance(2) Capacitance Dielectric Strength(5) Operate Time, including bounce Release Time Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature CONDITIONS SYMBOL MIN TYP MAX UNITS Full Blade Tolerance = ± 1.5NI Full Blade Tolerance = ± 1.5NI Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive 1V, 10mA Signal Level 10V, 10mA Low Level 50V, 100mA Telecom Load 100V, 100mA Rated Loads 50mV, 10mA(1) AT AT VL IL IC CR - 10 5 - 1000 500 2 2 70 Ru 30 30 200 500 2.0 10 100 - NI NI VDC mAmps Amps VA x106 Ops -x106 Ops x106 Ops x106 Ops Ω - 100V, 25°C, 40% RH Across Open Contacts Between Contacts At nominal coil voltage, 10Hz Square Wave Zener-Diode Suppression(3) IR TOP 109 250 - 1011 0.3 300 - 0.5 Ω pF VDC/Peak AC ms TREL - - 0.1 ms TA TO - -40 -40 - - +125 +125 +265 ˚C ˚C ˚C (1) Contact resistance measured with 4 terminal method, 1.1" between test leads >1012 Ω is available upon request A 24V zener in series with a diode across the coil (4) Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare, Inc. Engineering for more details/ recommendations (5) 15 ampere turn minimum (2) (3) 2 www.clare.com Rev. 1 Molded Mini-DYAD™ CM10 Mechanical Dimensions Dimensions mm (inches) Rev. 1 www.clare.com 3 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Switch Division 4315 Earth City Expresssway St. Louis, MO 63045 Tel: 1-314-770-1832 Fax: 1-314-770-1812 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: PB-CM10-R1 ©Copyright 2001 Molded Ultra-Mini DYAD™, Molded Mini DYAD™, and Molded DYAD® are trademarks of Clare, Inc. All rights reserved. Printed in USA. 4/23/01