Mimix CMM6003-SC 50-900 mhz high dynamic range amplifier Datasheet

50-900 MHz
High Dynamic Range Amplifier
CMM6003-SC
August 2007 - Rev 07-Aug-07
Features
50 to 900 MHz Frequency Range
+41 dBm Output IP3
-71 dBc CTB
-48 dBc CSO
1.6 dB Noise Figure (@ 450 MHz)
17 dB Gain
22 dBm P1dB
RoHS Compliant SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
MTBF > 100 Years
Ideal for CATV Applications
Absolute Maximum Ratings
Description
Supply Voltage
RF Input Power*
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
The CMM6003-SC is a high dynamic range amplifier suitable
for cable TV applications between 50 and 900 MHz. The
combination of gain flatness, bandwidth, low noise figure and
high third order intercept point make it ideal for cable modem,
CATV distribution and laser diode driver applications. The
CMM6003-SC can operate directly from 5V or 3.3V supply
voltage in 75 ohm systems. The device is manufactured using
a highly reliable GaAs MESFET technology with an MTBF of
over 100 years at a mounting temperature of +85ºC. All
devices are 100% RF (at 800Mhz) and DC tested and they
come in an RoHs compliant SOT-89 package which provides
excellent electrical stability and low thermal resistance.
F requency R ange
Gain
Input Return Loss
O utput I P3
Noise Figure
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
Externally matched
Externally matched
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
59º C/W
Typical Parameters
Unless otherwise specified, the following specifications are guaranteed at room temperature
in a Mimix test fixture.
Condition
+10 dBm
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Electrical Characteristics
Parameter
+6.0 V
Min
Typ
Max
Units
50
15
800
17
-11
+41
3.3
1.9
22
150
900
18
MH z
dB
dB
dB m
dB
dB
dBm
mA
V
@ 50 MHz
@ 800 MHz
120
180
5. 0
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Parameter
Typical
Units
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
100
17.5
-12
-16
23
40
450
17.2
-12
-16
23.6
39
900
16.3
-11
-13
23.8
37
MHz
dB
dB
dB
dBm
dBm
Output IP2
Noise Figure
CTB
CSO
Xmod
52
3.5
-72
-48
-65
52
1.6
52
2
dBm
dB
dBc
dBc
dBc
Supply Voltage
Current
5
150
5
150
5
150
V
mA
Notes:
1. Typical values reflect performance in recommended application circuit.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
50-900 MHz
High Dynamic Range Amplifier
CMM6003-SC
August 2007 - Rev 07-Aug-07
Application Circuit: (75 )
Frequency
MHz
100
450
870
Gain
dB
17.5
17.2
16.3
Input Return Loss
dB
-12
-12
-11
Output Return Loss dB
-16
-16
-13
Output P1dB
dBm
23
23.6
23.8
Output IP3
dBm
40
39
37
Output IP2
dBm
52
52
52
1.6
2
dB
3.5
CTB
dBc
-72
CSO
dBc
-48
Xmod
dBc
-65
Supply Voltage
V
Current
mA
Ref Designator
C1,C2,C3
L1
L2
5
5
5
150
150
150
Value Size
1000 pF 0603
12 nH 0603
270 nH 0603
CMM6003-SC: 75 Ohm Board, Gain
CMM6003-SC: 75 Ohm Board, P1dB
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
17.5
17
16.5
S#1
S#2
Gain (dB)
OP1dB (dBm)
Noise Figure
16
S#1
S#2
15.5
15
14.5
14
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1
1
0.2
0.3
0.4
CMM6003-SC: 75 Ohm Board, OIP3
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
0.5
0.6
0.7
0.8
0.9
1
Frequency (GHz)
CMM6003-SC: 75 Ohm Board, OIP2
55
50
45
40
S#1
S#2
OIP2 (dBm)
OIP3 (dBm)
Frequency (GHz)
35
30
S#1
25
S#2
20
15
10
5
0
0.1
0.2
0.3
0.4
0.5
0.6
Frequency (GHz)
0.7
0.8
0.9
1
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
50-900 MHz
High Dynamic Range Amplifier
CMM6003-SC
August 2007 - Rev 07-Aug-07
Application Circuit: (50 )
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
Typical
450
17.2
-12.0
-16
+396
23.6
1.6
800
16.5
-11.5
-14
+41
23.7
1.9
Units
870
16.25
-10.5
-13
+41
23.8
2.0
MHz
dB
dB
dB
dBm
dBm
dB
Notes:
1. Typical values reflect performance in recommended application circuit.
RF
IN
CMM6003-SC
SOT-89
T = 500 mil
T = 70 mil
T = 125 mil
RF
OUT
T = 500 mil
uuuu
uuuu
L1
6.8 nH
L2
390 nH
C2
100 pF
Vcc
5V
C1
0.1 µF
INPUT MATCHING NETWORK
Ref Designator
C1
C2
L1
L2
Value Description
0.1 F VITR 0.1 F 25V CER
CAP 0603 X7R 10%
100 pF 0603CG101J9B20 T/R
6.8 nH TOKO LL 1608-F6N8J
390 nH Coilcraft 0805CS-391XJBC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Size
0603
0603
0603
0603
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
50-900 MHz
High Dynamic Range Amplifier
CMM6003-SC
August 2007 - Rev 07-Aug-07
S-Parameters vs. Frequency
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
50-900 MHz
High Dynamic Range Amplifier
CMM6003-SC
August 2007 - Rev 07-Aug-07
Physical Dimensions
4.50
[0.177]
1.55
[0.061]
0.71
[0.028]
1.73
[0.068]
0.38
[0.015]
1.70
[0.067]
4
1
0.46
[0.18]
3X
3.48
[0.137]
XXXXXXX
XXXXXX
ZYYWW
0.41
[0.016]
2.50
[0.096]
2
3
2.06
[0.081]
4.41
[0.163]
5.33
[0.210]
0.99
[0.039]
1.27
[0.050]
0.58
[0.023]
0.38
[0.015]
1.50
[0.059]
3.00
[0.118]
0.76
[0.030]
0.64
[0.025]
DIMENSIONS IN MILLIMETERS
[INCHES]
0.86
[0.034]
3.86
[0.152]
MARKINGS:
XXXXXXX = MIMIX MODEL NO.
XXXXXX = WAFER LOT NO.
ZYYWW = DATE CODE (YR/WEEK)
FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA
Ordering Information
Part Number for Ordering
CMM6003-SC-0G00
CMM6003-SC-0G0T
PB-CMM6003-SC-0000
PB-CMM6003-SC-00A0
Description
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
tape and reel
50 Ohm Evaluation Board
75 Ohm Evaluation Board
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Similar pages