Mimix CMM6004-SC-0G00 0.25-3.0 ghz high dynamic range amplifier Datasheet

0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Features
Functional Block Diagram
0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3
2.1 dB Noise Figure
14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
Ground
4
2
1
3
Ground Output
Bias
Input
Circuit Description
Absolute Maximum Ratings
The CMM6004-SC is a high dynamic range amplifier designed
for applications operating within the 0.25 to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required. The amplifier has
the flexibility of being optimized for a number of wireless
applications. The combination of low NF and high IP3 at the
same bias point make it an ideal transmit or receive solution
when used in applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from
2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz.
The CMM6004-SC is packaged in a low-cost, space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Supply Voltage
RF Input Power*
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+20 dBm
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Typical Parameters
Parameter
Typical
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
900 1900
16.5 14.5
-18
-15
-14
-10
+41.5 +41.0
23.8 23.5
1.8
2.2
Units
2400
13.6
-15
-12
+41.0
23.0
2.3
MHz
dB
dB
dB
dBm
dBm
dB
1. Typical values reflect performance in recommended application circuit.
Electrical Characteristics (T=25ºC)
Unless otherwise specified, the following specifications are guaranteed at room
temperature in a Mimix fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
0.25
13.5
+38
120
3.0
14.5
-10
+41
2.1
23
150
5.0
180
GHz
dB
dB
dBm
dB
dBm
mA
V
Notes:
1. T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Typical Performance
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Application Circuit - 900 MHz
S-Parameters vs Frequency
Typical Performance (50 Ohm System)
20
3.3V
900 MHz
16.2 dB
-19.0 dB
-16.0 dB
38.0 dBm
1.8 dB
Id = 173 mA
18.5 dBm
S21
10
Magnitude, dB
5V
Frequency
900 MHz
Gain
16.5 dB
Input Return Loss
-18.0 dB
Output Return Loss -14.0 dB
OIP3
41.0 dBm
Noise Figure
1.8 dB
Drain Current
Id = 173 mA
P1dB
23.8 dBm
0
S11
-10
-20
S22
-30
0.1
1.1
2.1
3.0
Frequency, GHz
CMM6004-SC
SOT-89
uuuu
T = 80 mil
T = 70 mil
RF
OUT
L2
47 nH
L1
12 nH
INPUT MATCHING
NETWORK
C2
T = 500 mil 56 pF
uuuu
RF
IN
Vcc
5V
C1
56 pF
Ref Designator
C1, C2
L1
L2
Value
56 pF
12 nH
47 nH
Description
MCH185A560JK
TOKO LL1608-F12NK
TOKO LL1608-F47NK
Size
0603
0603
0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Typical Performance Over Voltage
CMM6004-SC Evaluation board @ 900MHz
S11 Over Voltage
CMM6004-SC Evaluation board @ 900MHz
S21 Over Voltage
20
30
19
18
17
20
16
15
14
10
12
11
4V
3V
2V
10
9
S11 (dB)
S21 (dB)
13
4V
3V
2V
0
8
7
-10
6
5
4
3
-20
2
1
0
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
-30
3
Freq (GHz)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
Freq (GHz)
CCMM6004-SC Evaluation board @ 900MHz
P1dB Over Voltage
CMM6004-SC Evaluation board @ 900MHz
S22 Over Voltage
26
20
15
24
10
22
Power (dBm)
S22 (dB)
5
0
4V
3V
2V
-5
-10
20
18
-15
16
-20
14
-25
-30
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
12
3
1.5
Freq (GHz)
2
2.5
3
3.5
4
4.5
5
5.5
Voltage (V)
CCMM6004-SC Evaluation board @ 900MHz
OIP3 Over Voltage
50.0
48.0
46.0
44.0
42.0
OIP3 (dBm)
40.0
38.0
36.0
34.0
32.0
30.0
28.0
26.0
24.0
22.0
20.0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Voltage (V)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Distribution Charts @ 3.3V
Idss @ 3.3V
P1dB @ 3.3V
Gain @ 3.3V
OIP3 @ 3.3V
Note: Sample size is 250 samples taken from 3 different wafer lots.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Application Circuit - 1900 MHz
S-Parameters vs Frequency
Typical Performance (50 Ohm System)
S21
1900 MHz
14.5 dB
-15 dB
-10 dB
41.0 dBm
2.2 dB
Vds = 5V, Id = 174 mA
23.5 dBm
10
Magnitude, dB
0
S11
-10
S22
-20
-30
L1
2.7 nH
T = 80 mil
C1
2.2 pF
T = 70 mil
uuuu
T = 80 mil
uuuu
RF
IN
0
CMM6004-SC
SOT-89
0.5
1.0
1.5
Frequency, GHz
T = 70 mil
T = 500 mil
uuuu
Frequency
Gain
Input Return Loss
Output Return Loss
OIP3
Noise Figure
Bias
P1dB
20
L3
47 nH
L2
6.8 nH
INPUT MATCHING
NETWORK
Value
2.2 pF
C2, C3
L1
L2
L3
56 pF
2.7 nH
6.8 nH
47 nH
2.5
3.0
RF
OUT
C3
56 pF
Vcc
5V
C2
56 pF
Ref Designator
C1
2.0
Description
KOA 2.2pF 50V CER
CAP 0603 NPO ±.25pF
MCH185A560JK
TOKO LL1608-F2N7S
TOKO LL1608-F6N8K
TOKO LL1608-F47NK
Size
0603
0603
0603
0603
0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Application Circuit - 2400 MHz
S-Parameters vs Frequency
Typical Performance (50 Ohm System)
20
S21
2400 MHz
13.6 dB
-15 dB
-12 dB
41.0 dBm
2.3 dB
Vds = 5V, Id = 175 mA
23.0 dBm
10
Magnitude, dB
Frequency
Gain
Input Return Loss
Output Return Loss
OIP3
Noise Figure
Bias
P1dB
0
-10
S22
-20
-30
C1
1.2 pF
T = 70 mil
0
CMM6004-SC
SOT-89
0.5
1.0
T = 70 mil
1.5
Frequency, GHz
T = 500 mil
uuuu
L1
2.2 nH
T = 80 mil
uuuu
T = 80 mil
uuuu
RF
IN
S11
L3
47 nH
L2
6.8 nH
INPUT MATCHING
NETWORK
Value
1.2 pF
C2, C3
L1
L2
L3
56 pF
2.2 nH
6.8 nH
47 nH
2.5
3.0
RF
OUT
C3
56 pF
Vcc
5V
C2
56 pF
Ref Designator
C1
2.0
Description
PHYC 1.2pF 50V CER
CAP 0603 NPO ±.25pF
MCH185A560JK
TOKO LL1608-F2N2S
TOKO LL1608-F6N8K
TOKO LL1608-F47NK
Size
0603
0603
0603
0603
0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Typical Scattering Parameters
(Vds = +5V, Ids = 150 mA, T = 22ºC, unmatched device in a 50 ohm system)
Frequency
(MHz)
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
(Mag)
0.337
0.349
0.363
0.379
0.396
0.413
0.430
0.447
0.467
0.475
0.490
0.502
0.513
0.524
0.534
0.543
0.551
0.559
0.565
0.571
0.577
0.582
0.588
0.539
0.597
0.600
0.605
0.608
S11
(Ang)
-47.270
-58.240
-68.990
-79.290
-89.000
-98.120
-106.700
-114.700
-122.400
-129.600
-136.500
-143.100
-149.400
-155.500
-161.400
-167.100
-172.60
-178.000
176.800
171.500
166.400
161.400
156.500
151.600
146.800
142.000
137.200
132.500
(Mag)
7.379
7.259
7.127
6.986
6.829
6.666
6.502
6.330
6.162
5.991
5.820
5.655
5.494
5.339
5.189
5.045
4.906
4.775
4.647
4.523
4.402
4.289
4.183
4.081
3.983
3.886
3.795
3.706
S21
(Ang)
157.500
151.400
145.300
139.300
133.300
127.400
121.600
115.900
110.300
104.900
99.610
94.400
89.350
84.370
79.490
74.690
69.960
65.320
60.730
56.180
51.720
47.320
42.960
38.610
34.330
30.050
25.810
21.620
(Mag)
0.066
0.066
0.066
0.066
0.065
0.065
0.065
0.065
0.065
0.065
0.065
0.065
0.064
0.064
0.064
0.064
0.064
0.064
0.064
0.064
0.064
0.064
0.064
0.065
0.065
0.065
0.065
0.065
S12
(Ang)
(Mag)
-3.397
-6.123
-8.429
-10.740
-12.900
-14.990
-16.990
-18.970
-20.840
-22.900
-24.660
-26.510
-28.490
-30.130
-32.120
-34.010
-35.800
-37.620
-39.550
-41.370
-43.200
-45.090
-46.900
-48.790
-50.760
-52.670
-54.540
-56.660
0.067
0.064
0.062
0.060
0.059
0.057
0.055
0.053
0.052
0.049
0.047
0.046
0.044
0.042
0.041
0.040
0.039
0.038
0.037
0.037
0.036
0.035
0.036
0.035
0.035
0.036
0.037
0.038
S22
(Ang)
-164.10
-173.50
-179.70
-173.90
-169.10
-165.00
-161.60
-158.60
-155.50
-152.50
-150.10
-147.00
-144.30
-141.50
-138.80
-136.00
-133.00
-130.00
-127.20
-124.10
-119.80
-116.00
-111.50
-106.20
-101.30
-95.96
-90.92
-85.54
S-Parameter Data Files are available online at www.mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Physical Dimensions
4.50
[0.177]
1.55
[0.061]
0.71
[0.028]
1.73
[0.068]
0.38
[0.015]
1.70
[0.067]
4
3.48
[0.137]
0.41
[0.016]
2.50
2.06
[0.096] [0.081]
1
0.46
[0.18]
3X
2
3
4.41
[0.163]
5.33
[0.210]
0.99
[0.039]
1.27
[0.050]
0.58
[0.023]
1.50
[0.059]
3.00
[0.118]
0.38
[0.015]
0.76
[0.030]
0.64
[0.025]
DIMENSIONS IN MILLIMETERS
[INCHES]
0.86
[0.034]
3.86
[0.152]
Example:
‘XXXX’ = Part Number
(4 chars max)
‘C’ = Country of Origin
(1 char)
XXXXP
aaaaaaa
CYYWW
‘P’ = Plating Option (1 char)
6004G
5010
P0701
‘aaaaaaa’ = Lot-Wafer Number
(7 chars max)
‘YYWW’ = Date Stamp
(year-year-week-week)
Base Part #:
Lot-Wafer #:
Plating Option:
Date Code:
Country of Origin:
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
6004
5010
G (matte tin)
2007, week 1
Philippines
Page 9 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
0.25-3.0 GHz
High Dynamic Range Amplifier
CMM6004-SC
January 2007 - Rev 15-Jan-07
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
The CMM6004-SC is available in a surface-mount SOT-89 package and devices are available in tape and reel.
Description
Part Number for Ordering
CMM6004-SC-0G00
Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
bulk quantity
CMM6004-SC-0G0T
Matte Tin finished RoHS compliant SOT-89 surface-mount power package in
tape and reel
PB-CMM6004-SC-00A0
Evaluation Board with SMA connectors for CMM6004-SC matched at 900 MHz
PB-CMM6004-SC-00B0
Evaluation Board with SMA connectors for CMM6004-SC matched at 1900 MHz
PB-CMM6004-SC-00C0
Evaluation Board with SMA connectors for CMM6004-SC matched at 2400 MHz
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 10 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Similar pages