RESISTORSCAPACITORSCOILSDELAY LINES THICK FILM CONCAVE CHIP ARRAYS CN SERIES Resistor Arrays ZN SERIES Jumper Arrays RoHS Popular self-aligning concave termination pads (convex termination style also available,see SMN series) Industry’s widest selection and lowest cost! 1Ω to 10MΩ, 1% to 5%, 6 sizes, 5 circuit schematics 2 to 8 resistors per array reduces mounting costs ZN Series zero ohm jumpers are 1Amp, 50mΩ max 4 PIN: CN0606 → P ← ← L → ↑ W ↓ --- ↑ RCD’s Series CN resistor and ZN jumper chip arrays not only enable significant pcb space savings, but a sizeable cost savings over the use of individual components. The savings in assembly cost, by placing a single chip instead of multiple chips, more than pays for the cost of these components. Circuits comprisied of multiple values are available on a custom basis. → 1 → H← Config. A ↑ W --- ↓ --- L ↓ ↑ W ↑ T --- → ← P ← Concave Termination Alumina Substrate 10 PIN MINI: CN1608 ↓ ↓ ↑ → H← Config. A ↑ 9 8 7 6 T 10 --- → ← P ← →H← ↑ W ↓ 1 → P ← Config. B L --- ↓ ↑ 5 1 2 3 4 Config. E 10 PIN STANDARD: CN2512 T 1 --- L 8 PIN: CN0804, CN1206, CN2012 → Term.W is RoHS compliant & 260°C compatible 10 9 8 7 6 1 2 3 4 5 10 9 8 7 6 T --- → H← 1 2 Config. C 3 4 5 Config. D RCD Type Config Rated Pow er* Working Voltage TC (ppm/°C) Res. Range 1% Tol Res. Range 2 & 5% Tol L ±.01 [.25] W±.008 [.2] P±.008 [.2] H±.006 [.15] T typ. CN0606 CN0804 CN1206 CN1608 CN2012 CN2012 CN2512 CN2512 A A A E A B** C D 62mW 62mW 62mW 62mW 125mW 62mW 62mW 62mW 50V 25V 50V 25V 50V 50V 50V 50V 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 1Ω - 1M 1Ω - 1M 1Ω - 1M ** ** ** ** ** 1Ω - 10M 1Ω - 1M 1Ω - 10M 22Ω - 1M 10Ω - 1M 10Ω - 1M 22Ω - 1M 22Ω - 1M .063 [1.6] .079 [2] .126 [3.2] .157 [4] .200 [5.08] .200 [5.08] .252 [6.4] .252 [6.4] .063 [1.6] .039 [1] .063 [1.6] .083 [2.1] .126 [3.2] .126 [3.2] .126 [3.2] .126 [3.2] .0315 [.8] .02 [.5] .0315 [.8] .0315 [.8] .050 [1.27] .050 [1.27] .050 [1.27] .050 [1.27] .022 [.55] .016 [.4] .022 [.55] .024 [.6] .024 [.6] .024 [.6] .024[ .6] .024[ .6] .012 [.3] .010 [.25] .016 [.4] .016 [.4] .022 [.56] .022 [.56] .018 [.45] .018 [.45] * Rated power is per resistor element at 70°C ** Consult factory for availability % OF 70°C RATING DERATING SUGGESTED PAD LAYOUT 100 75 50 25 0 -55 50 70 90 110 130 150 170 AMBIENT TEMPERATURE (°C) RCD Type F i g. A CN0606 (4-pin) 1 .016 [.4] CN0804 (8-pin) 1 .012 [.3] CN1206 (8-pin) 1 .016 [.4] CN1608 (10-pin) 2 .016 [.4] CN2012 (8-pin) 1 .034 [.87] C N2512 (10-pin) 1 .031 [.79] C .032 [.8] .024 [.6] .032 [.8] .040 [1] .040 [1] .045 [1.1] D .036 [.9] .020 [.5] .036 [.9] .040 [1] .080 [2] .094[2.4] Fig. 1 Operating Temp. Range -55°C to +155°C Short time Overload (2.5X rated W, 5 sec) ±2%+0.1Ω max. Resistance to Solder Heat (260°C, 10 sec) ±1%+0.1Ω max. Moisture Res. (90-95% RH, 40°C,100 hrs) ±3%+0.1Ω max. High Temp. Exposure (125°C, 100 hrs) ±1%+0.1Ω max. Load Life (1000 hrs at rated W) ±3%+0.1Ω max. Insulation Resistance 10,000 Megohm 400V P/N DESIGNATION: 12 12 12 12 12 12 12 12 12 12 123 12 123 D 12 12 C 12 12 Fig. 2 TYPICAL PERFORMANCE CHARACTERISTICS Dielectric Withstanding Voltage B .016 [.4] .008 [.2] .016 [.4] .016 [.4] .016 [.4] .019 [.48] D C 12 12 12 12 12 12 12 123 123 123 123123 123 123123 123 123123 123 123123 A 12 12 12 12 12 12 12 12 A 12 12 12 12 12 12 12 B 12 123 12 123 12123 ← .012 [.3] 121231234 121231234 1234A 12 123 C 12 12123 123 B CN 1206 A - 102 - J T W Type (CN, ZN) Chip Size Circuit Configuration: A, B, C, D, E Resis.Code 1%: 3 signif. figures & multiplier, e.g. 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ, etc. Resis.Code 2%-5%: 2 signif. figures & multiplier, e.g. 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1KΩ, etc. Leave blank on ZN zero-ohm jumper arrays (.05Ω max) Tolerance Code: J=5%(std), G=2%, F=1% Leave blank on ZN zero-ohm jumper arrays Packaging: B = Bulk, T = Tape & Reel Termination: W= Lead-free (standard), Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA101A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 31