resistors CN K/N convex termination with square corners resistor array EU features • • • • • Manufactured to type RK73 standards Less board space than individual chips Isolated resistor elements Convex terminations with square corners Marking: Body color black 1FN8K, 1H, 1E no marking 1J white three-digit marking • Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction a L p b W 1H4N (0201x4) 1E2K (0402x2) .055±.004 .024±.003 .004±.003 .008±.003 .014±.004 (1.4±0.1) (0.6±0.08) (0.1±0.08) (0.2±0.08) (0.35±0.1) .039±.004 .006±.004 .010±.004 (1.0±0.1) .039±.004 (0.15±0.1) (0.25±0.1) .014±.004 1E4K .079±.004 (1.0±0.1) .006±.004 .010±.008 (0.35±0.1) (0402x4) (2.0±0.1) (0.15±0.1) (0.25±0.2) 1J2K .063±.006 (0603x2) (1.6±0.15) .063±.006 .012±.008 .010±.004 .020±.004 1J4K .126±.006 (1.6±0.15) (0.3±0.2) (0.25±0.1) (0.5±0.1) (0603x4) (3.2±0.15) 1F8K .149±.004 .063±.004 .012±.004 .012±.004 .018±.004 1FN8K (3.8±0.1) (1.6±0.1) (0.3±0.1) (0.3±0.1) (0.45±0.1) (0602x8) C t d Protective Coating Electrode Resistive Film Ceramic Substrate Dimensions inches (mm) Size Code L W C d t a (ref.) b (ref.) 1H2N .031±.004 .024±.004 .006±.004 .006±.004 .014±.004 .012±.004 — (0201x2) (0.8±0.1) (0.6±0.1) (0.15±0.1) (0.15±0.1) (0.35±0.1) (0.3±0.1) Inner Electrode p (ref.) .020 (0.5) .008±.004 — (0.2±0.1) .013±.004 .007±.002 (0.33±0.1) (0.17±0.05) .016 (0.4) .026 (0.67) .012±.006 .006±.004 (0.3±0.15) (0.15±0.1) .020 (0.5) .024±.006 (0.6±0.15) .012±.004 .020±.006 (0.3±0.1) (0.5±0.15) 0.031 (0.8) .012±.004 (0.30±0.1) .020 (0.5) .006 (0.15) ordering information New Part # CN 1J 4 Type Size Elements 1H 1E 1J 1F 2 4 8 1F8 Marking Blank: Marking N: No Marking K T Terminal Convex K: Convex type with square corners N: Flat type with square corners Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TD Packaging TD: 7" paper tape TDD: 10" paper tape 101 Nominal Resistance 2 significant figures + 1 multiplier for ±5% 3 significant figures + 1 multiplier for ±1% J Tolerance F: ±1% J: ±5% For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 68 12/17/12 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com K/N convex termination with square corners resistor array circuit schematic CN1H2N, CN1E2K, CN1H4N, CN1E4K, CN1J2K CN1J4K R1 R2 R1 R2 R3 R4 R1 = R2 = R3 = R4 R1 = R2 CN1F8K, CN1FN8K R1 R2 R3 R4 R5 R6 R7 R8 R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 applications and ratings Part Designation CN1H2N CN1H4N CN1E2K CN1E4K CN1J2K CN1J4K CN1F8K CN1FN8K Power Rating @ 70°C (Per Element) T.C.R. (ppm/°C) Max. Resistance Range E-24, E-96 (F±1%) ––– 1/32W (.031W) 1/16W (.063W) Resistance Range E-24 (J±5%) ±200:R>10Ω ±400:R<10Ω Absolute Maximum Working Voltage Maximum Overload Voltage (5 Secs. Max.) 12.5V 25V 25V 50V 50V 100V 25V 50V 10Ω - 1MΩ 10Ω - 100kΩ 1Ω - 1MΩ 1/16W (.063W)* 10Ω - 1MΩ 0.25W per package Operating Temperature Range -55°C to +125°C * Note that network resistors generate higher heat rather than single flat chip resistor under rated power output environmental applications Derating Curve Circuit Board Application Vcc 100 % Rated Power 80 60 IC IC 40 20 0 0 -55 70 125 Ambient Temperature (°C) For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement Limit Within regulated tolerance Within specified T.C.R. ±2.0% ±1.0% ±1.0% ±5.0% ±5.0% ±1.0% ∆R Typical Test Method — 25°C — +25°C/-55°C, +25°C/+125°C ±0.25% ±0.75% ±0.5% ±1.0% ±0.5% ±0.15% Rated voltage x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 5 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +125°C, 100 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/17/12 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 69 resistors CN