SS-217 R2 6/4/07 1:29 PM Page 1 KOA SPEER ELECTRONICS, INC. SS-217 R2 AHA 6/04/07 Chip Networks Resistors Type CNB & CND Series CERTIFIED CERTIFIED 1. Features ■ ■ ■ ■ Concave or convex termnations Manufactured to type RK73 standards Four or eight bussed resistor elements included in one array Products with lead-free termiantions meet RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exception 5 of EU direction 2005/95/EC 2. Dimensions Size Code Figure No. CNB 2B9Z –– CNB 2E5Z –– CND 1J10K 2 CND 1J10Y 1 CND 2A10Y CND 2B10V 3 CND 2B10 L .252±.008 (6.4±0.2) W .126±.008 (3.2±0.2) C .018 (0.45) Dimensions inches (mm) t d a .033 .024±.006 .024±.004 (0.85) (0.6±0.15) (0.6±0.1) B1 .006 (0.15) .126±.008 (3.2±0.2) .098±.008 (2.5±0.2) .012 (0.3) .020±.006 (0.5±0.15) .024±.004 (0.6±0.1) .026 (0.65) .006 (0.15) .126±.004 (3.2±0.1) .063±.004 (1.6±0.1) .010±.004 (0.25±0.1) .020±.004 (0.5±0.1) .016±.004 (0.4±0.1) .012±.008 (0.3±0.2) .014±.004 (0.35±0.1) .022±.004 (0.55±0.1) .013±.006 (0.33±0.15) .008±.004 (0.20±0.1) .008±.004 (0.2±0.1) .157±.008 (4.0±0.2) .083±.008 (2.1±0.2) .016±.008 (0.4±0.2) .024±.004 (0.6±0.1) .020±.008 (0.5±0.2) .010±.008 (0.25±0.2) .004±.008 (0.1±0.2) .031 (0.8) .252±.008 (6.4±0.2) .122±.008 (3.1±0.2) .024±.004 (0.6±0.1) .024 (0.6) .006 (0.1) — 0.05 (1.27) — .014±.006 .022±.006 (0.35±0.15) (0.55±0.15) L p B2 t .025 (0.64) — C d d Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Ceramic Substrate Concave Figure 3 Figure 2 p L a p B1 B1 W W C t Electrode d Protective Coating Resistive Film Ceramic Substrate C t d Protective Coating Electrode Inner Electrode ■ P.O. Box 547 ■ Resistive Film Inner Electrode Ceramic Substrate PAGE 1 OF 4 Concave Convex Bolivar Drive .020±.004 (0.50±0.1) p t Resistive Film L .039 (1.0) W C a P2 .026±.004 (0.65±0.1) B1 W Electrode L a P2 B1 Inner Electrode Protective Coating — p .051 (1.3) Figure 1 CNB a B2 Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without pr ior notice. Please confir m technical specifications before you order and/or use. SS-217 R2 6/4/07 1:29 PM Page 2 KOA SPEER ELECTRONICS, INC. SS-217 R2 3. Type Designation The type designation shall be the following form: CNB 2B 9 Z T TE 103 J Type Size Elements Circuit Symbol Termination Material Packaging Nominal Resistance Tolerance CNB CND 1J 2A 2B 2E 5 9 10 K: for CND1J10K V: Reverse common electrode Y: Side electrode type Z: for CNB T: Sn TD: 7" Paper Taping TE: 7" Embossed Taping 2 significant figures + 1 multiplier J: ±5% 4. Circuit Construction CND1J10K 9 8 7 10 9 8 7 6 5 R R R R 1 R 2 R R 3 4 CNB2B9Z R 5 R R R R R R CND2B10V 9 8 7 10 R R R 1 1 2 3 CNB2E5Z R 2 R 3 6 10 9 CND2B10 8 7 6 CND1J10VK 9 8 7 10 6 5 R R R R R R R R R R 6 R 4 R R 1 R R R CND1J10Y, CND2A10Y 10 9 8 7 6 4 R R (Other termination styles may be available, please contact factory for options) R 2 103 R 3 R 4 R 5 1 R 2 103 R R 3 4 R 5 103 R 1 R 2 R 3 R 4 5 103 1 R 2 R R 3 4 5 103 5. Standard Applications Part Designation CNB2B9Z CNB2E5Z CND1J10K CND1J10Y CND2A10Y CND2B10V CND2B10 Power Rating @ 70°C (Per Element) T.C.R. (ppm/°C) Max. Resistance Range E-3*, E-12** Resistance Tolerance Absolute Maximum Working Voltage Maximum Overload Voltage (5 Secs. Max.) Operating Temperature Range 1/16W (.063W) ±200 1KΩ - 470KΩ* J: ±5% 50V 100V -55°C to +125°C 25V 50V 32mW 50mW 47Ω - 39kΩ** 22Ω - 39KΩ** ±200 63mW J: ±5% -55°C to +125°C 100Ω - 100KΩ** 50V 100V * E-3 significant figures (per decade) are 1.0, 2.2 and 4.7. ** E-12 CND only PAGE 2 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without pr ior notice. Please confir m technical specifications before you order and/or use. SS-217 R2 6/4/07 1:29 PM Page 3 KOA SPEER ELECTRONICS, INC. SS-217 R2 6. Environmental Applications For temperature in excess of 70°C, the load shall be derated in accordance with the following figure. Derating Curve Surface Temperature Rise 100 60 Temperature Rise (°C) % Rated Power 60 40 20 0 CNB2B9Z CND2A10Y CND2B10 50 80 40 30 20 10 0 20 40 60 80 100 120 140 70 125 Ambient Temperature (°C) 0 160 0 1/32 1/16 1/10 1/8 (W) Power 7. Body Color and Marking 6-2 Voltage Rating Body Color: Black Marking Color: White Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-mean-square (R.M.S.) continuous working voltage at commercial-line frequency and wave-form corresponding the power rating as determined from the following formula: Nominal resistance at 3-digit numbers Where: E: Rated Voltage (V) E= √ P • R 1 0 3 103 P: Power Rating (W) R: Nominal Resistance (Ω) However, if the rated voltage thus obtained surpasses the specified maximum working voltage, it shall be considered the rated voltage. 3-digit numbers The first and the second numbers show 2 effective numbers, the third number shows a multiple of 10. Example: 103 10,000Ω 10kΩ 472 4,700Ω 4.7kΩ 8. Performance Parameter Thermal Shock Low Temperature Operation High Temperature Exposure Short Time Overload Resistance to Solder Heat Terminal Strength-Push Terminal Strength-Bend Moisture Resistance Life Pulse Temperature Cycling Terminal Adhesion Dielectric Withstanding Voltage Insulation Resistance Maximum Δ R Test Method MIL-STD-202, Method 107, -55°C to +125°C, 5 cycles MIL-R-55342 π 4.7.4, 1 hour @ -55°C followed by 45 minutes of RCWV* MIL-R-55342 π 4.7.6, 100 hours @ 125°C MIL-R-55342 π 4.7.5, 2.5 x RCWV for 5 seconds MIL-R-55342 π 4.7.7, 260°C for 10 seconds 1.2 Kg for 1 minute 5mm deflection in either direction for 10 seconds MIL-STD-202, Method 103, 40°C, 90 - 95% RH, 1000 hours MIL-STD-202, Method 108, 70°C, 1000 hours @ RCWV, 1.5 hr ON, 0.5 hr OFF 2.5 x RCWV, not exceeding max. overload voltage, 1 sec. ON, 25 sec. OFF, 10,000 cycles 30 min. @ -55°C, 15 min. @ +25°C, 30 min. @ +125°C, 15 min. @ +25°C, 5 cycles Axial pull, one terminal at a time 1 minute minimum, MIL-STD-202, Method 301 — ±(1.0% + 0.1Ω) ±(2.0% + 0.05Ω) ±(1.0% + 0.1Ω) ±(0.5% + 0.05Ω) ±5.0% ±1.0% 15 Grams Minimum 400V 1,000 MΩ Minimum * RCWV = Rated Continuous Working Voltage. Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 PAGE 3 OF 4 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without pr ior notice. Please confir m technical specifications before you order and/or use. SS-217 R2 6/4/07 1:29 PM Page 4 KOA SPEER ELECTRONICS, INC. SS-217 R2 9. Taping Tape material and quantity per reel Tape material Embossed Tape width .472 in. (12 mm) Quantity/Reel (pcs.) 4,000 9.1 Taping Dimension (Embossed) 1.5 +0.1 -0 A B W 1.75±0.1 Carrier Tape P1 (TP) T1 P1 2.0 4.0±0.1 Direction of feed Component Size (mm) Type CND CNB 2B10 1J10 2A10 2B5Z 2E9Z L W T 6.40 3.20 4.00 3.2 6.40 3.1 1.6 2.1 2.5 3.2 0.6 0.55 0.6 0.6 T1 T1 (Notes) Dotted lines are applicable to only "TP" and "TB." Taping (mm) Carrier Tape Quantity/ Reel (Pieces) A B W P1 T1 Reel Size TE TD TE TE TE 4000 5000 4000 4000 4000 6.6±0.2 3.5±0.1 4.45±0.2 3.5±0.2 6.7±0.2 3.4±0.2 2.0±0.1 2.5±0.2 3.0±0.2 3.5±0.2 12.0±0.1 8.0±0.2 12.0±0.1 8.0±0.2 12.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 1±0.15 0.75+0.2/-0 1±0.15 1±0.15 1±0.15 178 178 178 178 178 10. Reel (Polystyrene Reel) Reel (mm) øa Central hole ø13 e Type All ød (mm) e (mm) 21 2 ød (Notes) Reel holes, shapes and design are examples 11. Reel Marking Lot Number The reel must be marked as follows: (1) Type designation (2) Nominal resistance (3) Quantity (4) Production lot number (5) Manufacturer’s name (6) Customer’s code number (7) Order number Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 Lot number (8 digits) 53 Production year, month 11 Date 8 Factory 001 Continuous number 8 KT & T factory ■ USA 17~28 January 2004 ~ December 2004 29~40 January 2005 ~ December 2005 41~52 January 2006 ~ December 2006 53~64 January 2007 ~ December 2007 ■ 814-362-5536 ■ Fax 814-362-8883 PAGE 4 OF 4 ■ www.koaspeer.com Specifications given herein may be changed at any time without pr ior notice. Please confir m technical specifications before you order and/or use.