Clipped-Sine & HCMOS OCXO Oven Controlled Crystal Oscillator • Low power consumption • Excellent temperature stabilities • High stability AT-cut crystal • Fast warm-up CO601 Specifications: CO-B Frequency Range: 2.0 MHz or 150.0 MHz Operating Temperature: Storage Temperature: 0°C ~ +50°C -A -10°C ~ +45°C -B -10°C ~ +55°C -C -20°C ~ +60°C -D -30°C ~ +70°C -E -40°C ~ +85°C Frequency Stability: Accuracy: Vs. Temperature: Short-Term Stability: Aging Rate: ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 2 x 10-10 ± 1 x 10-9 ± 5 x 10-7 - 57 - 17 - 58 - 18 - 59 per second per day per year max Output Waveform: Clipped-Sine Wave, HCMOS Output Level: 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS compatible Phase Noise: -100dBc/Hz -130sBc/Hz -140dBc/Hz -145dBc/Hz Harmonics Distortion: Supply Voltage: Supply Current: @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin -30 dB +5.0 VDC (± 5%) +12.0 VDC (± 5%) Vref 3 Vc/Nc 4 Ground 5 Output 400mA max at warm-up 100mA max after warm-up at 25°C 4.0 Watts max Frequency Adjust: ±3.0 ppm tuning via ext potentiometer 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. Fax: +86 10 6301 9167 All dimensions are in mm Ordering Information Note: June 2001 Vcc 2 -P Warm-up: Phone: +86 10 6301 4184 Configurations 1 Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO601C18-10.0MHz or CO601D58P-10.0MHz Email: [email protected] Web: http://www.vanlong.com Vanlong Technology Co., Ltd.