Amphenol RF MHV MHV Connectors ® Description MHV connectors from Amphenol RF are miniature, bayonet locking connections similar to the BNC interface but used for high voltage applications up to 5000 volts. This interface conforms to MIL-STD-348 and does not mate with standard BNC connectors. MHV connectors offer quick-connect functionality and are used in a variety of applications where transmission of high voltage is a requirement. The design of the MHV interface is such that the insulator protrudes beyond the outer contact to provide a degree of protection from shock in the unmated condition. In the mated condition, this interface is considered weatherproof and free from dust ingress. Features/Benefits •5000 Volts Peak •Quick Connect/Disconnect •Non-Constant Impedance •Conforms to Mil 348 Standards Applications 164 MHV •High Voltage Environments •Transmission/Conversion lines •Power Supplies •Military Applications Amphenol® RF: 800-627-7100 MHV MHV Specifications Electrical Impedance Frequency range Voltage rating (at sea level) Current rating Non-Constant 0-50MHz 5,000 volts peak 5 amp max Mechanical Mating Cable affixment 2 stud bayonet lock/ braid clamp Standard Clamp, MIL Clamp, and Original Crimp (see description) Environmental Temperature range Weatherproof Hermetic seals -65°C to +165°C All Pass helium leak test of 2 x 10 -8 cc/sec. Material Body and outer contacts: Male contact Female contact Other metal parts Insulator Clam Gaskets: Brass Brass Beryllium copper. Silver plated Brass: ASTROplate finish Teflon, glass teflon (herm. seal) Silicone or synthetic rubber Note: These characteristics are typical but may not apply to all connectors. Amphenol® RF: 800-627-7100 MHV 165 MHV Plugs Straight Plating Cable Group Part Number Body Contact Military Reference C E E 000-29100 000-28000 000-27975 Nickel Nickel Nickel Silver Silver Silver UG 932/U UG 932A/U Right Angle Plating Cable Group Part Number E 000-28100 Body Contact Nickel Silver Jacks Straight Jack Plating Part Number 000-27075 Body Contact Nickel Silver Military Reference UG 1016A/U Panel Jack Plating 166 Part Number Body Contact 000-28175 Nickel Silver MHV Amphenol® RF: 800-627-7100 MHV Receptacle Panel Receptacle Plating Part Number Body Contact Military Reference 000-27000 Nickel Silver UG 931/U Bulkhead Receptacle Plating Part Number Body Contact Terminal 000-10400 000-27025 Nickel Nickel Silver Silver Glass Turret Description Rear Mount Glass, Pressurized Rear Mount Adapters Plating Part Number Body Contact 000-12650 Nickel Silver Amphenol® RF: 800-627-7100 Description Straight (Jack to Jack) 4 hole flange MHV 167 Cable Group Listing Cable Group Cable Type A B B1 B2 B3 C C1 C2 D E E1 E2 E3 F F1 G1 G2 G3 G4 G5 H H1 H2 H3 I I2 J K K2 K3 L L2 L3 L4 M M1 M2 M3 N N1 N2 N3 P1 P2 P3 P4 168 RG-178, 196 RG-174, 188A, 316, Belden 7805 RG-179, 187, Belden 9221 RD-188/U, RD-316/U RD-179/U, AT&T 19224L2 RG-58, 58A, 58C, 141, 303, LMR195, Belden 7806A, 9907 RG-55, 142, 223, 400 LMR200, Belden 7807A RG-58/U Plenum, Thinnet, RG-122/U, Belden 88240, 89907 RG-59, 62, 140, 210, Belden 8241, 8263, 8279, 9209 RG-59/U 20 AWG center conductor, Belden 1426A, 1505A, 9100, 9278 RD-59/U, Belden 8281, 9141, 9231 RG-59/U Quad Shield, Belden 1152A RG-59/U Plenum, Belden 1560A, 9259, 82259, 89259, 88241 RG-59/U Plenum 20 AWG center conductor, Belden 82108 RG-6, 143, 212 8X, LMR240, Belden 7808A, 9258 LMR400, Belden 7810A, 8214, 9913 RG-8, 8A, 9, 87A, 213, 214, 225, 393 RD-6/U RG-11 Belden 1694A, 9248 Belden 1859A, 7731, 8213, 9292 RG-54A/U AT&T 734A, Belden 1505A AT&T 735A, Belden 735A1 Quad 59 headend cable LMR600 Belden 1695A RG-122, 180, 195, Belden 1855, 1865A, 8218 .141 semi-rigid, RG-402/U .085, .086, .087 semi-rigid, RG-405/U .250 semi-rigid .047 semi-rigid, Belden 1674 1/2 inch annular corrugated 1 1/4 inch annular corrugated 1 5/8 inch annular corrugated 7/8 inch annular corrugated 1/4 Helical 3/8 Helical 1/2 Helical 7/8 inch SFC .81 mm OD micro-cable 1.13 mm OD micro-cable, TCB-068 1.32 mm OD micro-cable 1.37 mm OD micro-cable Cable Group Listing