D../CRCW....-IF e3 Vishay Lead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors FEATURES • • • • • High pulse performance Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes • Compatible with “Restriction of the use of Hazardous Substances” (RoHS) directive 2002/95/EC (issue 2004) • Excellent stability (ΔR/R ≤ ± 1 % for 1000 h at 70 °C) in different environmental conditions STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC POWER RATING P70 °C W LIMITING ELEMENT VOLTAGE MAX. V 50 75 150 200 TEMPERATURE COEFFICIENT ppm/K TOLERANCE RESISTANCE RANGE % Ω E-SERIES D10/CRCW0402-IF 0402 1005 0.063 ± 200 ± 5, ± 10 1R0 - 100K E24 D11/CRCW0603-IF 0603 1608 0.10 ± 200 ± 5, ± 10 1R0 - 100K E24 D12/CRCW0805-IF 0805 2012 0.125 ± 200 ± 5, ± 10 1R0 - 100K E24 D25/CRCW1206-IF 1206 3216 0.25 ± 200 ± 5, ± 10 1R0 - 100K E24 Notes • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. • Marking and packaging: See appropriate catalog or web pages • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER UNIT D10/CRCW0402-IF D11/CRCW0603-IF D12/CRCW0805-IF D25/CRCW1206-IF W 0.063 0.10 0.125 0.25 Rated Dissipation at P70 (1) V 50 75 150 200 Limiting Element Voltage Umax. AC/DC V > 75 > 100 > 200 > 300 Insulation Voltage Uins (1 min) Thermal Resistance K/W ≤ 870 ≤ 550 ≤ 440 ≤ 220 Insulation Resistance Ω > 109 Category Temperature Range °C - 55 to + 155 Weight mg 0.65 2 5.5 10 Note (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printe-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW08051R00JNEAIF (2) C R C W 0 8 0 5 1 R 0 0 J N E A I F MODEL/SIZE VALUE TOLERANCE TCR PACKAGING (3) SPECIAL CRCW0402 CRCW0603 CRCW0805 CRCW1206 R = Decimal K = Thousand J=±5% K = ± 10 % N = ± 200 ppm/K S = Special EA, EB, EC ED, EE, EI, EL Up to 2 digits IF = Pulse 5% ET1 e3 LEAD (Pb)-FREE e3 = Pure tin Terminal finish PRODUCT DESCRIPTION: D12/CRCW0805-IF 200 1R0 5 % ET1 e3 D12/CRCW0805-IF 200 1R0 MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING (3) D10/CRCW0402-IF D11/CRCW0603-IF D12/CRCW0805-IF D12/CRCW1206-IF ± 200 ppm/K 1R0 = 1 Ω 10K = 10.0 kΩ ±5% ± 10 % ET1, ET5, ET6, ET7, EF4, EG1, E20 Notes (2) Preferred way for ordering products is by use of the PART NUMBER (3) Please refer to table PACKAGING, see next page www.vishay.com 1 For technical questions, contact: [email protected] Document Number: 20024 Revision: 13-Oct-08 D../CRCW....-IF e3 Lead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors Vishay PACKAGING REEL MODEL DIAMETER PITCH PIECES/ REEL 180 mm/7" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 330 mm/13" 2 mm 2 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 10 000 50 000 5000 10 000 20 000 5000 10 000 20 000 5000 10 000 15 000 20 000 TAPE WIDTH D10/CRCW0402-IF 8 mm D11/CRCW0603-IF 8 mm D12/CRCW0805-IF 8 mm D25/CRCW1206-IF 8 mm PACKING CODE PART NUMBER PRODUCT DESC. PAPER BLISTER PAPER BLISTER ED ET7 EE EF4 EA EI ET1 EG1 EB ET5 EC EL ET6 E20 EA EI ET1 EG1 EB ET5 EC EL ET6 E20 EA EI ET1 EG1 EB ET5 EL E20 EC ET6 DIMENSIONS L T2 b I W a H T1 SIZE DIMENSIONS (in millimeters) INCH 0402 METRIC 1005 L 1.0 ± 0.05 W 0.5 ± 0.05 H 0.35 ± 0.05 T1 0.25 ± 0.05 T2 0.2 ± 0.1 0603 1608 1.55 + 0.10 - 0.05 + 0.10 - 0.20 + 0.10 - 0.20 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0805 2012 2.0 1206 3216 3.2 SOLDER PAD DIMENSIONS (in millimeters) REFLOW SOLDERING WAVE SOLDERING a b l a b l 0.4 0.6 0.5 0.5 0.9 1.0 0.9 0.9 1.0 1.25 ± 0.15 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3 FUNCTIONAL PERFORMANCE Pulse Power (W) Maximum pulse dissipation as a function of the pulse duration, single pulse 10 000 1206 0805 0603 0402 1000 100 10 1 0.1 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Duration (s) Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and Û ≤ Ûmax.; for permissible resistance change equivalent to 8000 h operation Document Number: 20024 Revision: 13-Oct-08 For technical questions, contact: [email protected] www.vishay.com 2 D../CRCW....-IF e3 Lead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors Vishay Pulse Power (W) Maximum pulse dissipation as a function of the pulse duration, continuous pulse 10 000 1206 0805 0603 0402 1000 100 10 1 0.1 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Duration (s) Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax.; for permissible resistance change equivalent to 8000 h operation Pulse Voltage (V) Maximum permissible pulse voltage as a function of pulse duration 800 1206 700 600 0805 500 400 300 0603 200 0402 100 0 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration (s) Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.; for permissible resistance change equivalent to 8000 h operation Peak Voltage (V) Single-pulse high voltage overload test 1.2/50 µs EN140000 4.27 1000 1206 0805 0603 0402 100 10 1 1 10 100 1000 10 000 100 000 Resistance Value (Ω) Pulse load rating in accordance to EN 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals; for permissible resistance change 1 % www.vishay.com 3 For technical questions, contact: [email protected] Document Number: 20024 Revision: 13-Oct-08 D../CRCW....-IF e3 Lead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors Vishay Peak Voltage (V) Single-pulse high voltage overload test 10/700 µs EN140000 4.27 1000 1206 0805 0603 0402 100 10 1 1 10 100 1000 10 000 100 000 Resistance Value (Ω) Temperature Rise in °C Pulse load rating in accordance to EN 60115-1, 4.27; 10 µs/700 µs; 10 pulses at 1 min intervals; for permissible resistance change 1 % 90 80 0402 0603 0805 1206 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 Power in W Temperature Rise Document Number: 20024 Revision: 13-Oct-08 For technical questions, contact: [email protected] www.vishay.com 4 D../CRCW....-IF e3 Lead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 REQUIREMENTS PERMISSIBLE CHANGE (ΔR/R) TEST (clause) CONDITIONS OF TEST STABILITY CLASS 1 OR BETTER Stability for product types: D../CRCW....-IF e3 Resistance (4.5) - 1 Ω to 100 kΩ ±5% ± 10 % 20/- 55/20 °C and 20/125/20 °C ± 200 ppm/K U = 2.5 × (P70 × R)1/2 ≤ 2 × Umax.; Duration: according the style ± (0.25 % R + 0.05 Ω) Aging 4 h at 155 °C, dryheat solder bath method; 235 °C; 2 s visual examination Good tinning (≥ 95 % covered) no visible damage Resistance to soldering heat (4.18.2) Solder bath method; (260 ± 5) °C; (10 ± 1) s ± (0.25 % R + 0.05 Ω) Rapid change of temperature (4.19) 30 min at LCT = - 55 °C; 30 min at UCT = 125 °C; 5 cycles ± (0.25 % R + 0.05 Ω) (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (1 % R + 0.05 Ω) 16 h at UCT = 125 °C; 1 cycle at 55 °C; 2 h at LCT = - 55 °C; 1 h/1 kPa at 15 °C to 35 °C; 5 cycles at 55 °C U = (P70 × R)1/2 U = Umax.; whichever is less severe ± (1 % R + 0.05 Ω) U = (P70 × R)1/2 U = Umax.; whichever is less severe 1.5 h on; 0.5 h off; 70 °C; 1000 h ± (1 % R + 0.05 Ω) Duration extended to 8000 h ± (2 % R + 0.1 Ω) UCT = 125 °C; 1000 h ± (1 % R + 0.05 Ω) Temperature coefficient (4.8.4.2) Overload (4.13) Solderability (4.17.5) Damp heat, steady state (4.24) Climatic sequence (4.23) Endurance at 70 °C (4.25.1) Extended endurance (4.25.1.8) Endurance at upper category temperature (4.25.3) APPLICABLE SPECIFICATIONS • EN 60115-1 Generic Specification • EN 140400 Sectional Specification • EN 140401-802 Detail Specification • IEC 60068-2-X Variety of environmental test procedures • IEC 60286-3 Packaging of SMD components www.vishay.com 5 For technical questions, contact: [email protected] Document Number: 20024 Revision: 13-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1