CRCW....-HP e3 Vishay Pulse Proof, High Power Thick Film Chip Resistors FEATURES • • • • • • Excellent pulse load capability Enhanced power rating Double side printed resistor element Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes • Compliant to RoHS directive 2002/95/EC • AEC-Q200, rev. C compliant STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC CRCW0402-HP e3 0402 1005 CRCW0603-HP e3 0603 1608 CRCW0805-HP e3 0805 2012 CRCW1206-HP e3 1206 3216 CRCW2010-HP e3 2010 5025 CRCW2512-HP e3 2512 6332 POWER RATING P70 W LIMITING ELEMENT VOLTAGE MAX. V TEMPERATURE COEFFICIENT ppm/K TOLERANCE % ± 100 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 2.5 A ± 100 0.25 75 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 4 A ± 100 0.33 150 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 5 A ± 100 0.5 200 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 6 A ± 100 1.0 400 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 10 A ± 100 1.5 500 ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 14 A 0.125 (1) 50 RESISTANCE RANGE E-SERIES Ω ±1 ±5 1R to 1M E24 + E96 E24 ±1 ±5 1R to 1M E24 + E96 E24 ±1 ±5 1R to 1M E24 + E96 E24 ±1 ±5 1R to 1M E24 + E96 E24 ±1 ±5 1R to 1M E24 + E96 E24 ±1 ±5 1R to 1M E24 + E96 E24 Notes (1) CRCW0402-HP resistors feature a single side printed resistive layer only • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime • Marking and packaging: see appropriate catalog or web page • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation P70 (1) Limiting Element Voltage Umax. AC/DC Insulation Voltage Uins. (1 min) Insulation Resistance Category Temperature Range Weight UNIT CRCW0402-HP CRCW0603-HP CRCW0805-HP CRCW1206-HP CRCW2010-HP CRCW2512-HP W 0.125 0.25 0.33 0.5 1.0 1.5 V 50 75 150 200 V Ω °C mg > 75 > 100 > 200 400 500 > 300 > 109 - 55 to + 155 0.65 2 5.5 10 25.5 42 Note (1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. www.vishay.com 1 For technical questions, contact: [email protected] Document Number: 20043 Revision: 07-May-09 CRCW....-HP e3 Pulse Proof, High Power Thick Film Chip Resistors Vishay PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW0603562RFKEAHP (1) C R C W MODEL/SIZE CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW2010 CRCW2512 0 6 0 VALUE R = Decimal K = Thousand M = Million 0000 = Jumper 3 5 6 2 TOLERANCE F=±1% J=±5% Z = Jumper R F K E A H P TCR K = ± 100 ppm/K N = ± 200 ppm/K 0 = Jumper PACKAGING (2) EA EB EC ED EE EI EL EF EG EH SPECIAL Up to 2 digits HP = Pulse proof, High Power PRODUCT DESCRIPTION: CRCW0603-HP 100 562R 1 % ET1 e3 CRCW0603-HP 100 562R 1% ET1 e3 MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING (2) LEAD (Pb)-FREE CRCW0402-HP CRCW0603-HP CRCW0805-HP CRCW1206-HP CRCW2010-HP CRCW2512-HP ± 100 ppm/K ± 200 ppm/K 10R = 10 Ω 562R = 562 Ω 10K = 10 kΩ 1M = 1 MΩ 0R0 = Jumper ±1% ±5% ET1 ET5 ET6 ET7 EF4 EG1 E20 E02 E67 E82 e3 = Pure tin termination finish Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to table PACKAGING, see below PACKAGING REEL MODEL PACKAGING CODE TAPE WIDTH DIAMETER PITCH PIECES/ REEL PART NUMBER PAPER CRCW0402-HP 8 mm 180 mm/7" 330 mm/13" 2 mm 2 mm 10 000 50 000 ED EE CRCW0603-HP 8 mm 180 mm/7" 285 mm/11.25" 330 mm/13" 4 mm 4 mm 4 mm 5000 10 000 20 000 EA EB EC 8 mm 180 mm/7" 285 mm/11.25" 330 mm/13" 4 mm 4 mm 4 mm 5000 10 000 20 000 EA EB EC 8 mm 180 mm/7" 285 mm/11.25" 330 mm/13" 4 mm 4 mm 4 mm 5000 10 000 20 000 EA EB EC CRCW0805-HP CRCW1206-HP BLISTER PRODUCT DESC. PAPER BLISTER ET7 EF4 EI EL EI EL EI EL ET1 ET5 ET6 EG1 ET1 ET5 ET6 EG1 ET1 ET5 ET6 EG1 E20 E20 E20 CRCW2010-HP 12 mm 180 mm/7" 4 mm 4000 EF E02 CRCW2512-HP 12 mm 180 mm/7" 8 mm 4 mm 2000 4000 EG EH E67 E82 Document Number: 20043 Revision: 07-May-09 For technical questions, contact: [email protected] www.vishay.com 2 CRCW....-HP e3 Pulse Proof, High Power Thick Film Chip Resistors Vishay DIMENSIONS in millimeters b l a SOLDER PAD DIMENSIONS SIZE RESISTANCE RANGE Ω DIMENSIONS INCH METRIC 0402 1005 1R - 1M REFLOW SOLDERING WAVE SOLDERING a L W H T1 T2 a b l 1.0 ± 0.05 0.5 ± 0.05 0.3 ± 0.1 0.25 ± 0.1 0.2 ± 0.1 0.4 0.6 0.5 b l 0603 1608 1R - 1M 1.6 ± 0.1 0.85 ± 0.1 0.45 ± 0.1 0.3 ± 0.2 0.3 ± 0.2 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 1R - 1M 2.0 ± 0.15 1.25 ± 0.15 0.50 ± 0.1 0.4 ± 0.2 0.35 ± 0.2 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 1R - 1M 3.1 ± 0.2 1.6 ± 0.15 0.50 ± 0.15 0.5 ± 0.2 0.45 ± 0.2 0.9 1.7 2.0 1.1 1.7 2.3 2010 5025 1R - 1M 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 1R - 1M 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2 1.2 3.2 5.2 Pulse Load Pmax. (W) FUNCTIONAL PERFORMANCE 10 000 2512 2010 1206 0805 0603 0402 1000 100 10 1 0.1 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 Single Pulse 100 1 10 Pulse Duration ti (s) Continuous Pulse Load Pmax. (W) Maximum pulse dissipation as a function of the pulse duration, single pulse for CRCW...-HP 10 000 2512 2010 1206 0805 0603 0402 1000 100 10 1 0.1 0.01 0.000001 0.00001 0.0001 Continuous Pulse 0.001 0.01 0.1 1 10 100 Pulse Duration ti (s) Maximum pulse dissipation as a function of the pulse duration, continuous pulse for CRCW...-HP www.vishay.com 3 For technical questions, contact: [email protected] Document Number: 20043 Revision: 07-May-09 CRCW....-HP e3 Pulse Proof, High Power Thick Film Chip Resistors Vishay Pulse Voltage U max. (V) 2000 2512 1800 1600 2010 1400 1200 1000 800 1206 600 0805 400 0603 200 0 0.00001 0402 0.0001 0.001 0.01 Pulse Voltage 0.1 1 10 Pulse Duration ti (s) Rated Power in % Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.; for permissible resistance change equivalent to 8000 h operation 120 100 80 60 40 20 0 - 55 Derating Document Number: 20043 Revision: 07-May-09 - 25 0 25 50 75 70 100 125 155 175 Ambient Temperature in °C For technical questions, contact: [email protected] www.vishay.com 4 CRCW....-HP e3 Pulse Proof, High Power Thick Film Chip Resistors Vishay TEST PROCEDURES AND REQUIREMENTS EN 60115-1 TEST (clause) REQUIREMENTS PERMISSIBLE CHANGE (ΔR) CONDITIONS OF TEST STABILITY CLASS 2 OR BETTER Stability for product types: 1 Ω - 1 MΩ CRCW....-HP e3 Resistance (4.5) - ± 1 %, ± 5 % 20/- 55/20 °C and 20/125/20 °C ± 100 ppm/K, ± 200 ppm/K U = 2.5 x P 70 x R ≤ 2 × Umax.; Duration: according the style ± (0.5 % R + 0.05 Ω) Aging 4 h at 155 °C, dryheat Solder bath method; 235 °C; 2 s Visual examination Good tinning (≥ 95 % covered) no visible damage Resistance to soldering heat (4.18.2) Solder bath method; (260 ± 5) °C; (10 ± 1) s ± (1 % R + 0.05 Ω) Rapid change of temperature (4.19) 30 min at LCT = - 55 °C; 30 min at UCT = 125 °C; 5 cycles ± (1 % R + 0.05 Ω) (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (2 % R + 0.05 Ω) 16 h at UCT = 125 °C; 1 cycle at 55 °C; 2 h at LCT = - 55 °C; 1 h/1 kPa at 15 °C to 35 °C; 5 cycles at 55 °C U = P 70 x R U = Umax.; whichever is less severe ± (2 % R + 0.05 Ω) U = P 70 x R U = Umax.; whichever is less severe 1.5 h ON; 0.5 h OFF; 70 °C; 1000 h ± (2 % R + 0.05 Ω) UCT = 155 °C; 1000 h ± (2 % R + 0.05 Ω) Temperature coefficient (4.8.4.2) Overload (4.13) Solderability (4.17.5) Damp heat, steady state (4.24) Climatic sequence (4.23) Endurance at 70 °C (4.25.1) Endurance at upper category temperature (4.25.3) APPLICABLE SPECIFICATIONS • EN 60115-1 Generic specification • AEC-Q200 Generic specification • EN 140400 Sectional specification • EN 140401-802 Detail specification • IEC 60068-2-X Variety of environmental test procedures • IEC 60286-3 Packaging of SMD components www.vishay.com 5 For technical questions, contact: [email protected] Document Number: 20043 Revision: 07-May-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1