SMD Type Multi Layer Ceramic Capacitors Multi Layer Ceramic Capacitors SMD Type Shape & Dimensions Introduction SAMWHA's series of multilayer ceramic(MLC) chip capacitors is designed to meet a wide variety of need. (Unit : mm) Multilayer ceramic chip capacitors are available in both class I and class II formulations. Temperature Dimensions compensation formulations are class I and temperature stable and general application formulations are classified at class II. The class I multilayer ceramic capacitors are COG with negligible dependence of Code(inch) Length electrical properties on temperature, voltage, frequency. The most of commonly used class II dielectric are Width T1(min) L Tol(±) W Tol(±) X7R, X5R and Y5V. The X7R provides intermediate capacitance values which vary ±15% over the 0603(0201) 0.60 0.03 0.30 0.03 0.05 temperature range of -55℃ to 125℃. The X5R provides intermediate capacitance values which vary ±15% 1005(0402) 1.00 0.05 0.50 0.05 0.05 over the temperature range of -55℃ to 85℃. The Y5V provides the highest capacitance value which vary 1608(0603) 1.60 0.15 0.80 0.10 0.10 from 22% to -82% over the temperature range of -30℃ to 85℃. All class II capacitors vary in capacitance 2012(0805) 2.00 0.20 1.25 0.15 0.10 value under the influence of temperature, operating voltage and frequency. We offer a complete line of 3216(1206) 3.20 0.30 1.60 0.20 0.15 3225(1210) 3.20 0.40 2.50 0.25 0.15 4520(1808) 4.50 0.40 2.00 0.25 0.20 4532(1812) 4.50 0.40 3.20 0.30 0.20 5750(2300) 5.70 0.50 5.00 0.40 0.30 products for both class I and II . Features *1608 Size ≥ 10㎌ ⇒ W : 0.8±0.15, T : 0.8±0.15 Samwha’s high density ceramic bodies offer superior performance and reliability Samwha offer various temperature characteristics, rated voltage and packing method Material with high dielectric constant and superior manufacturing technology allows very high values in a small size Solder coated terminals offer superior solderability Applications Wide applications throughout commercial and industrial market. How to Order(Product Identification) CS 1608 X7R 104 K 160 N R B Type Size Code CS : SMD This is expressed in tens of a millimeter. SA : ARRAY The first two digits are the length, the last two digits are width. Size(mm) 0603 1005 1608 2012 3216 3225 4520 4532 5750 Communication products like Cellular Phone, Pager, Codeless phone Multimedia products like DVD, CD-ROM, FDD, HDD, Game machine, Computer, Note book, Digital camera, LCD Audio visual products like TV, Camcorder, Minidisk, MP3 Player Communication products like Electronic tuner, Duplexer, VCXO, TCXO, Modem www.samwha.com OA equipment products like Printer, Copy Machine, Fax Machine 4 SAMWHA CAPACITOR Co., Ltd. Temperature Coefficient Code Temperature Characteristice Temperature Range Capacitance Change or Temperature Coefficient Operating Temperature Range C0G -55 to 125℃ 0±30ppm/℃ -55 to 125℃ X7R -55 to 125℃ ±15% -55 to 125℃ X5R -55 to 85℃ ±15% -55 to 85℃ Y5V -30 to 85℃ +22, -82% -30 to 85℃ Multi Layer Ceramic Capacitors 5 SMD Type Multi Layer Ceramic Capacitors Typical Performance Characteristics Capacitance Code(Pico Farads) The nominal capacitance value in pF is expressed by three digit numbers. COG The first two digits represents significant figures and the last digit denotes the number of zero Ex.) 104 = 100000pF R denotes decimal 8R2 = 8.2pF Application Suited for precision circuits, requiring stable dielectric characteristics, negligible dependence of capacitance and Capacitance Tolerance Code dissipation factor on time, voltage and frequency. Code Tolerance Code Tolerance B ±0.1pF M ±20% Dielectric Characteristics C ±0.25pF P +100, -0% Temperature Characteristic 0±30ppm/℃ D ±0.5pF Z +80, -20% Operating Temperature -55~125℃ F ±1.0% H +0.25/-0pF Capacitance Tolerance G ±2.0% I +0/-0.25pF 10pF : ±5%, ±10%, (±1%, ±2%, ±20%) ≤10pF : ±0.1pF, ±0.25pF, ±0.5pF J ±5% U +5/-0% Dissipation Factor & Q K ±10% V +0/-5% ≥30pF : DF≤0.1%, Q≥1000 30pF : Q≥400+20×C Insulation Resistance More than 10,000MΩor 500ΩF (Whichever is smaller) Voltage Code Code 6R3 100 160 250 500 101 201 251 631 302 Vol. DC 6.3V DC 10V DC 16V DC 25V DC 50V DC 100V DC 200V DC 250V DC 630V DC 3000V Termination Code 3×RVDC Test Voltage 0.5 to 5Vrms(≤1000pF), 1±0.2Vrms(>1000pF) Test Frequency 1±0.1M㎐(≤1000pF), 1±0.1k㎐(>1000pF) X7R Ex.) N : Ni-Sn (Nickel-Tin Plate) Application Packing Code Ex.) R : Reel Type Dielectric Strength Stable class Ⅱdielectric properties, suited for by-pass and coupling purposes, filtering, frequency discrimination, DC B : Bulk Type blockage, and as voltage transient suppression elements. Thickness Option Code (Unit : mm) Thickness(mm) Code Thickness(mm) Dimensions W Tol(±) L Tol(±) Blank 0.30 0.03 E 1.30 0.20 Blank 0.50 0.05 H 1.35 0.20 A 0.60 0.10 I 1.60 0.20 B 0.80 0.10 J 1.80 0.20 B 0.85 0.15 K 2.00 0.25 E 1.00 0.15 L 2.50 0.25 E 1.10 0.15 M 2.80 0.30 E 1.15 0.15 N 3.20 0.30 E 1.25 0.15 O 5.00 0.40 www.samwha.com 6 Dimensions SAMWHA CAPACITOR Co., Ltd. Dielectric Characteristics Temperature Characteristic ±15% Operating Temperature -55~125℃ Capacitance Tolerance ±10%, ±20%, (±5%, +80~-20%) Dissipation Factor & Q 50V Min. : 2.5% Max. 25V Min. : 3.0% Max. 16V Min. : 3.5% Max. 10V Min. : 5.0% Max. 6.3V Min. : 5.0% Max.(＜3.3㎌), 10% Max.(≥3.3㎌) Thin layer lange capacitors type 10% Max. Insulation Resistance More than 10,000MΩor 500ΩF(Whichever is smaller) Thin layer lange capacitors type 50ΩF Min. Dielectric Strength >2.5×RVDC Test Voltage 1±0.2Vrms(≤10㎌, 10V Min.) 0.5±0.1Vrms(≤10㎌, 6.3V Max.) 0.5±0.1Vrms(>10㎌) Test Frequency 1±0.1k㎐(≤10㎌, 10V Min.) 1±0.1k㎐(≤10㎌, 6.3V Max.) 120±24㎐(>10㎌) Multi Layer Ceramic Capacitors 7 SMD Type Multi Layer Ceramic Capacitors X5R Appendix Ⅰ Application C0G-Temperature Compensating Type(0603~3216) Stable class Ⅱdielectric properties, suited for by-pass and coupling purposes, filtering, frequency discrimination, DC blockage, and as voltage transient suppression elements. Type Size(inch) Volt(V) Cap. Dielectric Characteristics Temperature Characteristic ±15% Operating Temperature -55~85℃ Capacitance Tolerance ±10%, ±20%, (±5%, +80~-20%) Dissipation Factor & Q 50V Min. : 2.5% Max. 25V Min. : 3.0% Max. 16V Min. : 3.5% Max. 10V Min. : 5.0% Max. 6.3V Min. : 5.0% Max.(＜3.3㎌), 10% Max.(≥3.3㎌) Thin layer lange capacitors type 10% Max. Insulation Resistance More than 10,000MΩ or 500ΩF (Whichever is smaller) Thin layer lange capacitors type 50ΩF Min. Dielectric Strength >2.5×RVDC Test Voltage 1±0.2Vrms(≤10㎌, 10V Min.) 0.5±0.1Vrms(≤10㎌, 6.3V Max.) 0.5±0.1Vrms(>10㎌) Test Frequency 1±0.1k㎐(≤10㎌, 10V Min.) 1±0.1k㎐(≤10㎌, 6.3V Max.), 120±24㎐(>10㎌) Y5V Application The Hi-K(Y5V) dielectrics deliver high capacitance density and are ideally suited for applications where space is at a premium, or as replacement for tantalum capacitors. Typically applications include use as by-pass or decoupling elements. Best performance is obtained at or near room temperature, with low DC bias. Dielectric Characteristics www.samwha.com Temperature Characteristic +22%~-82% Operating Temperature -30~85℃ Capacitance Tolerance -20~+80%(±20%) Dissipation Factor & Q 50V Min. : 5% Max. 25V Min. : 7% Max. 16V Min. : 9% Max. 10V Min. : 12.5% Max. 6.3V Min. : 15% Max. Thin layer lange capacitors type 20% Max. Insulation Resistance More than 10,000MΩor 500ΩF(Whichever is smaller) Thin layer lange capacitors type 50ΩF Min. Dielectric Strength >2.5×RVDC Test Voltage 1±0.2Vrms(≤10㎌, 10V Min.) 0.5±0.1Vrms(≤10㎌, 6.3V Max.) 0.5±0.1Vrms(>10㎌) Test Frequency 1±0.1k㎐(≤10㎌, 10V Min.) 1±0.1k㎐(≤10㎌, 6.3V Max.), 120±24㎐(>10㎌) 8 SAMWHA CAPACITOR Co., Ltd. 0603(0201) 25 1005(0402) 25 50 C0G 1608(0603) 25 50 2012(0805) 25 3216(1206) 50 25 50 0.5㎊(0R5) 1㎊(010) 2㎊(020) 3㎊(030) 4㎊(040) 5㎊(050) 6㎊(060) 7㎊(070) 8㎊(080) 9㎊(090) 10㎊(100) 12㎊(120) 15㎊(150) 18㎊(180) 22㎊(220) 27㎊(270) 33㎊(330) 39㎊(390) 47㎊(470) 56㎊(560) 68㎊(680) 82㎊(820) 100㎊(101) 120㎊(121) 150㎊(151) 180㎊(181) 220㎊(221) 270㎊(271) 330㎊(331) 390㎊(391) 470㎊(471) 560㎊(561) 680㎊(681) 820㎊(821) 1000㎊(102) 1200㎊(122) 1500㎊(152) 1800㎊(182) 2200㎊(222) 2700㎊(272) 3300㎊(332) 3900㎊(392) 4700㎊(472) 5600㎊(562) 6800㎊(682) 8200㎊(822) 10000㎊(103) 12000㎊(123) 15000㎊(153) 18000㎊(183) 22000㎊(223) 27000㎊(273) 33000㎊(333) 47000㎊(473) 56000㎊(563) 68000㎊(683) 82000㎊(823) 0.1㎌(104) Temperature Compensating Type : Dissipation Factor Page 22 (No.5) Multi Layer Ceramic Capacitors 9 SMD Type Multi Layer Ceramic Capacitors Appendix Ⅱ X7R-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type Type Size(inch) Volt(V) Cap. Type X7R 0603(0201) 1005(0402) 1608(0603) 2012(0805) X5R-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type 3216(1206) 3225(1210) 6.3 10 16 25 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 Size(inch) Volt(V) Cap. 100㎊(101) 100㎊(101) 470㎊(471) 470㎊(471) 1000㎊(102) 1000㎊(102) 2200㎊(222) 2200㎊(222) 4700㎊(472) 4700㎊(472) 10000㎊(103) 10000㎊(103) 15000㎊(153) 15000㎊(153) 22000㎊(223) 22000㎊(223) 33000㎊(333) 33000㎊(333) 47000㎊(473) 47000㎊(473) 68000㎊(683) 68000㎊(683) 0.1㎌(104) 0.1㎌(104) 0.15㎌(154) 0.15㎌(154) 0.22㎌(224) 0.22㎌(224) 0.33㎌(334) 0.33㎌(334) 0.47㎌(474) 0.47㎌(474) 0.68㎌(684) 0.68㎌(684) 1.0㎌(105) 1.0㎌(105) 1.5㎌(155) 1.5㎌(155) 2.2㎌(225) 2.2㎌(225) 4.7㎌(475) 4.7㎌(475) 6.8㎌(685) 6.8㎌(685) 10㎌(106) 10㎌(106) 22㎌(226) 22㎌(226) 47㎌(476) 47㎌(476) 100㎌(107) 100㎌(107) www.samwha.com 10 X5R 0603(0201) 1005(0402) 1608(0603) 2012(0805) 3225(1210) 6.3 10 16 25 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 General Type : Dissipation Factor Page 22 (No.5) General Type : Dissipation Factor Page 22 (No.5) General Type : Dissipation Factor Page 22 (No.5) General Type : Dissipation Factor Page 22 (No.5) Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5) Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5) SAMWHA CAPACITOR Co., Ltd. 32169(1206) Multi Layer Ceramic Capacitors 11 SMD Type-High Voltage Multi Layer Ceramic Capacitors SMD Type-High Voltage Y5V-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type Type Size(inch) Y5V 1005(0402) 1608(0603) 2012(0805) 3216(1206) 3225(1210) Volt(V) Cap. 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 1000㎊(102) Product Offering SAMWHA high voltage MLCC products with COG(NPO) and X7R temperature characteristic are designed for commercial and industrial applications. The products are power supply and voltage multiplier circuits applications in various sizes with working 2200㎊(222) voltages up to DC 3.0 KV . 4700㎊(472) These high voltage capacitors feature a special internal electrode design which reduces voltage 10000㎊(103) concentrations by distributing voltage gradients throughout the entire capacitor. 15000㎊(153) This unique design also affords that capacitance value is increased in a given case size and voltage rating. 22000㎊(223) 33000㎊(333) Features 47000㎊(473) High reliability 68000㎊(683) High voltage ratings 0.1㎌(104) 0.15㎌(154) Wide voltage level : from 100V to 3000V Surface mount suited for Wave and Reflow Soldering Tape & reel surface mount assembly 0.22㎌(224) Suitable for Back-Lighting Inverter, DC-DC Converters, Ballast, Modems & Power Supply, LAN/WLAN 0.33㎌(334) interface... etc. 0.47㎌(474) 0.68㎌(684) 1.0㎌(105) How to Order(Product Identification) 1.5㎌(155) 2.2㎌(225) CS 4520 COG 150 J 302 N R E 3.3㎌(335) 4.7㎌(475) 6.8㎌(685) 10㎌(106) 22㎌(226) Type CS : SMD 47㎌(476) 100㎌(107) General Type : Dissipation Factor Page 22 (No.5) www.samwha.com General Type : Dissipation Factor Page 22 (No.5) Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5) Size Code Size(mm) 1608 2012 3216 3225 4520 4532 Dielectric (Temp. Coefficient) COG, X7R Capacitance 1st two digits are value, 3rd digit denotes number of zeros; 331 = 330pF, 104 = 100000pF, 8R2C = 8.2pF 12 SAMWHA CAPACITOR Co., Ltd. Multi Layer Ceramic Capacitors 13 SMD Type-High Voltage Multi Layer Ceramic Capacitors Shape & Dimensions Tolerance Code Tolerance Code Tolerance B ±0.1pF C ±0.25pF D ±0.50pF F ±1% G ±2% J ±5% K ±10% M ±20% Z +80~-20% (Unit : mm) Dimensions Rated Voltage Code Code 1st two digits are value, 3rd digit denotes number of zeros; 302 = 3000V, 251 = 250V Plating Packing Ni / Sn Plated B : Bulk Pack R : Reel Pack Thickness Option Code (Unit : mm) Thickness(mm) Dimensions Code Length Width T1(min) L Tol(±) W Tol(±) 1608(0603) 1.60 0.15 0.80 0.10 0.10 2012(0805) 2.00 0.20 1.25 0.15 0.10 3216(1206) 3.20 0.30 1.60 0.20 0.15 3225(1210) 3.20 0.40 2.50 0.25 0.15 Thickness(mm) Dimensions 4520(1808) 4.50 0.40 2.00 0.25 0.20 W Tol(±) 4532(1812) 4.50 0.40 3.20 0.30 0.20 5750(2300) 5.70 0.50 5.00 0.40 0.30 L Tol(±) Blank 0.30 0.03 E 1.30 0.20 Blank 0.50 0.05 H 1.35 0.20 A 0.60 0.10 I 1.60 0.20 B 0.80 0.10 J 1.80 0.20 B 0.85 0.15 K 2.00 0.25 E 1.00 0.15 L 2.50 0.25 E 1.10 0.15 M 2.80 0.30 E 1.15 0.15 N 3.20 0.30 E 1.25 0.15 O 5.00 0.40 *1608 Size ≥ 10㎌ ⇒ W : 0.8±0.15, T : 0.8±0.15 Typical Performance Characteristics COG(NPO) Dielectric Characteristics X7R Dielectric Classification Ultra Stable Stable Rated temperature range -55℃ to +125℃ -55℃ to +125℃ TCC(Temperature Characteristics Coefficient) 0±30ppm ±15% Dissifation Factor(tan δ) C≥30pF : Q≥1,000 (DF:≤ 0.1%) 2.5% Max. C<30pF : Q≥400+20C(DF: ≤1/(400+20C)) www.samwha.com 14 SAMWHA CAPACITOR Co., Ltd. IR(Insulation Resistance) 500V Below : Rated voltage 60sec 500V Above : 500V 60sec More than 10,000 ㏁ 500V Below:Rated voltage 60sec 500V Above:500V 60sec -DC100V~1KV :C≥0.01㎌:More than 100㏁㎌ :C<0.01㎌:More than 10,000㏁ -DC2~3KV:More than6,000 ㏁ Capacitance Tolerance <10pF : ±0.25pF, ±0.5pF ≥10pF : ±5%, ±0% ±10%, ±20% Dielectric strength 630V:150% Rated Voltage 1kV~3.15kV:120% Rated Voltage 100V:150% Rated Voltage 630V:150% Rated Voltage 1kV~3.15kV: 120% Rated Voltage Aging characteristics 0% 2.5% per decade hr, typical Multi Layer Ceramic Capacitors 15 SMD Type-High Voltage Multi Layer Ceramic Capacitors Appendix High Voltage Type(100V~3000V) COG-Temperature Compensation Type Type Size(inch) Volt(V) Cap. X7R-High Dielectric Type Type C0G 1608(0603) 2012(0805) 3216(1206) 3225(1210) 4520(1808) 4532(1812) 100 250 100 250 100 250 630 1000 2000 100 250 630 1000 2000 100 250 630 1000 2000 3000 100 250 630 1000 2000 3000 4.7㎊(4R7) 5㎊(050) 7㎊(070) Size(inch) Volt(V) Cap. X7R 1608(0603) 2012(0805) 3216(1206) 3225(1210) 4520(1808) 4532(1812) 100 250 100 250 100 250 630 1000 2000 100 250 630 1000 2000 100 250 630 1000 2000 3000 100 250 630 1000 2000 3000 220㎊(221) 330㎊(331) 470㎊(471) 8㎊(080) 9㎊(090) 10㎊(100) 680㎊(681) 1000㎊(102) 12㎊(120) 1500㎊(152) 15㎊(150) 2200㎊(222) 18㎊(180) 3300㎊(332) 22㎊(220) 47㎊(470) 4700㎊(472) 5600㎊(562) 56㎊(560) 68㎊(680) 82㎊(820) 6800㎊(682) 10000㎊(103) 100㎊(101) 15000㎊(153) 220㎊(221) 18000㎊(183) 330㎊(331) 22000㎊(223) 470㎊(471) 560㎊(561) 33000㎊(333) 47000㎊(473) 680㎊(681) 1000㎊(102) 1500㎊(152) 68000㎊(683) 0.1㎌(104) 2200㎊(222) 0.15㎌(154) 2700㎊(272) 0.22㎌(224) 3300㎊(332) 0.33㎌(334) 4700㎊(472) 5600㎊(562) 0.47㎌(474) 0.68㎌(684) 6800㎊(682) 10000㎊(103) 15000㎊(153) www.samwha.com 22000㎊(223) 1.0㎌(105) 2.2㎌(225) High voltage type 33000㎊(333) High voltage type 16 SAMWHA CAPACITOR Co., Ltd. Multi Layer Ceramic Capacitors 17 SMD Type-High Voltage Multi Layer Ceramic Capacitors Application(Typical circuit) DC-DC Converter Caution(Rating) Switching Power Supply 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p Value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage DV Voltage DC+AC Voltage AC Voltage Pulse Voltage(1) Pulse Voltage(2) Positional Measurement C2 : X7R ; 250V 10nF~47nF C3 : COG ; 630V 47pF~100pF C3 : COG, X7R ; 2kV 100pF~1000pF C4 : COG, X7R ; 2kV 100pF~1000pF 2. Test condition for AC withstanding Voltage (1) Test Equipment Primary circuit and Snubber switching power supply Tests for AC withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60 Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. (2) Voltage applied method The capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage is applied C1, C2 : COG or X7R 1000pF~4700pF C4 : COG ; 2kV 100pF~330pF C5 : COG ; 1kV/2kV 100pF~470pF directly to the capacitor without raising it from near zero,it should be applied with the *zero cross. At the end of the test time, the test voltage should be reduced to near zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding voltage test equipment. If the test voltage is applied directly to the capacitor without raising it from near zero, surge voltage may occur and cause a defect. *ZERO CROSS is the point where voltage sine wave (3) Dielectric strength testing method LCD back light Inverter In case of dielectric strength test, the capacitor’s is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 3. Soldering C2 : COG ; 3kV 10 ~100pF If a chip component is heated or cooled abruptly during soldering, it may crack due to the thermal shock. To prevent this, follow our recommendations below for adequate soldering conditions. Carefully perform preheating so that temperature difference (ΔT) between the solder and component surface is in the following www.samwha.com range. The smaller the temperatures difference (Δ T) between the solder and component surface is, Chip Size Slodering Method 3.2×1.6mm and under Reflow Method or Soldering Lron Method ΔT 190℃ 3.2×2.5mm and over ΔT 130℃ the smaller the influence on the chip is. 18 SAMWHA CAPACITOR Co., Ltd. Multi Layer Ceramic Capacitors 19 SMD Type Multi Layer Ceramic Capacitors SAMWHA CAPACITOR CO., LTD offers a line of MLCC(Multilayer Ceramic Capacitor). These parts are rated at 3kV dc and safety approved and certified to UL (Underwriters Laboratories Inc. ) Reliability and Test Conditions(General Type) Characteristic No. Item Temperature Compensating Type High Dielectric Constant Type X7R : -55 to +125℃ X5R : -55 to +85℃ Y5V : -30 to +85℃ Test Methods and Conditions 1 Operating Temperature Range C0G : -55 to +125℃ 2 Insulation Resistance More than 10,000MΩ or 500ΩF(Whichever is smaller) - Applied the rated voltage for 2 minutes of charging. - The charge/discharge current is less than 50mA. 3 Dielectric Strength No defects or abnormalities - C0G : The rated voltage×300% - X7R, X5R, Y5V : 〃 ×250% - Applied between the terminations for 1 to 5 seconds. - The charge/discharge current is less than 50mA. 4 Capacitance Within the specified tolerance 5 Dissipation Factor 30㎊ Min. : Q≥1,000 (DF≤0.1%) 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) 6 Solderability of Termination Char. 50V Min. 25V 16V 10V 6.3V X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/ X5R ≤5% ≤7% ≤7% ≤10% ≤10% Y5V ≤5%/ ≤7%/ ≤9% ≤12.5%/ ≤15% ≤9% ≤9% ≤12.5% ≤15% You can check the specification at the appendix for each product with mark Termination should be covered with more than 75% of new solder The capacitance/Q/D.F. should be measured at 25℃ at the frequency and voltage shown in the table. Testing Frequency Testing Voltage C0G (C≤1000pF) 1±0.1M㎐ 0.5 to 5Vrms C0G (C >1000pF) 1±0.1k㎐ 1±0.2Vrms X7R, X5R, Y5V (C≤10㎌ 6.3V Min.) 1±0.1k㎐ 1±0.2Vrms X7R, X5R, Y5V (C >10㎌) 120±24㎐ 0.5±0.1Vrms Cap. - Pb-Free Type Solder : 96.5Sn-3Ag-0.5Cu Solder Temperature : 260±5℃ Immersion Time : 3±0.1sec - Pre-Heating at 80~120℃ for 10~30sec 7 Resistance Appearance No marked defect to Capacitchange Within ±2.5% or ±0.25㎊ X7R, X5R : ≤ ±7.5% Soldering (whichever is larger) Y5V : ≤ ±20% Heat Dissipation Factor (or Q) www.samwha.com I.R. 20 SAMWHA CAPACITOR Co., Ltd. 30㎊ Min. : Q≥1,000 (DF≤0.1%) 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Char. 50V Min. 25V 16V 10V 6.3V X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/ X5R ≤5% ≤7% ≤7% ≤10% ≤10% Y5V ≤5%/ ≤7%/ ≤9% ≤12.5%/ ≤15% ≤9% ≤9% ≤12.5% ≤15% More than 10,000MΩ or 500Ω.F (Whichever is smaller) - Preheat the capacitor at 120 to 150℃ for 1 minute. (Preheating for 3225, 4520, 4532 Step1 : 100℃ to 120℃, 1min Step2 : 170℃ to 200℃, 1min) Immerse the capacitor in a eutectic solder solution - Soldering Temp. : 260±5℃ - Immersion Time : 10±0.5sec - Initial measurement Perform a heat treatment at 150+0, -10℃ for one hour and then let sit for 48±4 hours at room temperature. Perform the intial measurement. - Measurement after test Take it out and set it for 24±2 hours (temperature compensating type) or 48±4 hours (high dielectric constant type)then measure Multi Layer Ceramic Capacitors 21 SMD Type Multi Layer Ceramic Capacitors Characteristic Item No. 8 Temperature Appearance Cycle Temperature Compensating Type Dissipation Factor (or Q) 9 Humidity Load High Dielectric Constant Type 30㎊ Min. : Q≥1,000 (DF≤0.1%) 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) X7R, X5R : Within ±7.5% Y5V : Within ±20% Char. 50V Min. 25V 16V Step 10V ≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/ ≤7.5% ≤10% ≤10% ≤12.5% ≤12.5% Y5V ≤7.5%/ ≤10%/ ≤12.5% ≤15%/ ≤20% ≤12.5% ≤12.5% ≤15% ≤20% More than 10,000MΩor 500Ω.F(Whichever is smaller) Appearance No marking defects Dissipation Factor (or Q) I.R. Appearance 10 High Temperature Capacitance Load Change Dissipation Factor (or Q) 30㎊ Min. : Q≥200 (DF≤0.5%) 30㎊ Max. : Q≥100 +10/3C (DF≤1/(100+10/3C)) www.samwha.com 22 1 2 3 X7R, X5R : Within ±12.5% Y5V : Within +30%, -40% (Y5V/1.0㎌, 2.2㎌, 4.7㎌/10V) Within ±30% (others) Char. 50V Min. 25V 16V 10V 6.3V X7R X5R ≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/ ≤7.5% ≤10% ≤10% ≤12.5% ≤12.5% Y5V ≤7.5%/ ≤10%/ ≤12.5% ≤15%/ ≤20% ≤12.5% ≤12.5% ≤15% ≤20% Item Temperature Compensating Type High Dielectric Constant Type 11 Bending Strength - Board Thickness : 1.6mm 0.8mm(0603/1005size) Min. Max. Temp. Operating Room Operating Room (℃) Temp. Temp. Temp. Temp. +0, -3 +3, -0 Time 2 to 3 30±3 2 to 3 (Min) 30±3 ※ Test Condition - Bending Limit : 1mm - Pressurizing Speed : 1mm/sec - Initial measurement Perform a heat treatment at 150+0, -10℃ for one hour and then let sit for 48±4 hours at room temperature. - Measurement after test Take it out and set it for 24±2 hours (temperature compensating) or 48±4 hours(high dielectric constant type) at room temperature, then measure. - Humidity : 90~95% No cracking or marking defects shall occur Capacitance Within ±5% or ±0.5㎊ Change (whichever is larger) X7R, X5R : Within ±12.5% Y5V : Within ±30% 12 Vibration Appearance No defects or abnormalities Resistance Capacitance Whin the specified tolerance - Hour : 500±12hrs Q/DF - Test Voltage : The rated voltage - Take it out and set it for 24±2 hours (temperature compensating) or 48±4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA 30㎊ Min. : Q 1,000 (DF 0.1%) 30㎊ Max. : Q 400+20C (DF 1/ (400+20C)) Char. 50V Min. 25V 16V 10V 6.3V X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/ X5R ≤5% ≤7% ≤7% ≤10% ≤10% Y5V ≤5%/ ≤7%/ ≤9% ≤9% ≤9% ≤12.5%/ ≤15% ≤12.5% ≤15% More than 500MΩor 25Ω.F(Whichever is smaller) No marking defects Within ±3% or ±0.3㎊ (whichever is larger) 30㎊ Min. : Q≥350 (DF≤0.3%) 10㎊≤Cp ≤30㎊ : Q≥275 +5/2C (DF≤1/(275+5/2C)) Shown in Fig. After soldering and then let sit for 24+4hr(temperature compensating type), 48±4hr (high dielectric constant type) at room temperature. The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz, shall be traversed(from 10Hz to 55Hz then 10Hz again) in approximately 1 minute. This motion shall be applied for a period of 2 hours in each 3mutually perpendicular directions(total is 6hours). - Testing time : 1000±12hrs X7R, X5R : Within ±12.5% Y5V : Within ±30%(Cap. < 1.0㎌) Within +30%, -40% (Cap. ≥ 1.0㎌) Char. 50V Min. 25V 16V 10V 6.3V X7R ≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/ X5R ≤7.5% ≤10% ≤10% ≤12.5% ≤12.5% Y5V ≤7.5%/ ≤10%/ ≤12.5% ≤15%/ ≤20% ≤12.5% ≤12.5% ≤15% ≤20% More than 10,000MΩ or 50Ω.F(Whichever & Smaller) SAMWHA CAPACITOR Co., Ltd. Test Methods and Conditions - Substrate Material : Glass EPOXY Board 4 - Temperature : 40±2℃ 10㎊ Max. : Q≥200+10C (DF≤1/(200+10C)) I.R. 6.3V X7R X5R I.R. Capacitance Within ±7.5% or ±0.75㎊ Change (whichever is larger) No. Perform the five cycless according to the four heat treatments listed in the following table. No marking defects Capacitance Within ±2.5% or ±0.25㎊ Change (whichever is larger) Characteristic Test Methods and Conditions - Applied voltage : Rated voltage < DC250V : ×200% - Temperature : C0G, X7R → 125±3℃ X5R , Y5V → 85±3℃ - Measurement after test Take it out and set it for 24±2 hours(temperature compensating type)or 48±4 hours (high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. 13 Humidity Steady State Appearance No marking defects Capacitance Within ±5% or ±0.5㎊ Change (whichever is larger) Dissipation (or Q) 30㎊ Min. : Q≥350 (DF≤0.3%) 10㎊≤Cp ≤30㎊ : Q≥275 +5/2C (DF≤1/(275+5/2C)) - Temperature : 40±2℃ - Humidity : 90~95% X7R, X5R : Within ±12.5% Y5V : Within ±30% Char. 50V Min. 25V 16V - Hour : 500±12hours 10V 6.3V X7R X5R ≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/ ≤7.5% ≤10% ≤10% ≤12.5% ≤12.5% Y5V ≤7.5%/ ≤10%/ ≤12.5% ≤15%/ ≤20% ≤12.5% ≤12.5% ≤15% ≤20% - Measurement after test Take it out and set it for 24±2 hours (temperature compensating type) or 48±4 hours(high dielectric constant type) at room temperature, then measure. 10㎊ Max. : Q≥200+10C (DF≤1/(200+10C)) I.R More than 1,000MΩor 50Ω.F (Whichever is Smaller) Multi Layer Ceramic Capacitors 23 Radial & Axial Multi Layer Ceramic Capacitors Radial & Axial Characteristic No. Item Temperature Compensating Type 14 Capacitance Capacitance Temperature Change Characteristics Temperature Coefficient Char. Temp. Range Test Methods and Conditions High Dielectric Constant Type Char. Temp. Range X7R -55 to +125℃ X5R -55 to +85℃ Y5V -30 to +85℃ Reference Temp. Cap. Change Within ±15% 25℃ Temperature Coefficient -55 to C0G ±30ppm/℃ +125℃ Within ±15% Within 22% -82% (1) Temperature Compensating Type: The temperature coefficient is determined using the capacitance measured in step 3 as a reference, When cycling the temperature sequentially from step 1 through 5, (C0G: +25 to 125℃) the capacitance shall be with in the specified tolerance for the temperature coefficient. The capacitance drift is calculated by dividing the difference between the maximum measured values in the step 1, 3 and 5 by the Cap. value in step 3 Step Temperature(℃) 1 25±2 2 -55±3 3 25±2 4 125±3(for C0G) 5 25±2 Features This widely used ceramic capacitors includes both monolithic and multilayer types to provide a wide capacitance range of 1pF through 1㎌ in respectly one standard size and shape(Radial & Axial). Applications The class1 temperature compensating(C0G) products can be used in circuits to stabilize frequency and temperature characteristics. The X7R, Z5U, Y5V dielectrics are optimum for by pass capacitors. Shape and Dimensions Bulk Type Radial Type (2) High Dielectric Constant Type : The ranges of capacitance change compared with the 25℃ value over the temperature range shown in the table shall be in the specified range. CODE 051B 077B 15 16 Preservation(keeping) ※When solderability is considered, capacitors are recommended to be used in 12 months The regulation of environmental pollution materials. L Max. W Max. 5.5 5.5 7.7 7.6 T Max. H Max. P ±0.7 Ød Color Marking 5 0.5 Orange or Gold Ex) 104 6.4 3.2 9.2 (1) Temperature : 25℃ ±10℃ (2) Relative Humidity : Below 70% RH ※Never use materials mentioned below in MLCC products regulated this document. Pb, Cd, Hg, Cr+6, PBB(polybromide biphenyl), PBDE(polybrominated diphenyl ethers), asbestos. - In case of high Voltage and thin layer type Capacitor, it can be different from nomal specification. So Please ask to our sales person. Flat Type Radial Type Axial Type www.samwha.com 24 SAMWHA CAPACITOR Co., Ltd. Multi Layer Ceramic Capacitors 25 Radial & Axial Multi Layer Ceramic Capacitors Code Dimensions Tolerance Code Dimensions Tolerance Code Dimensions Tolerance D(Ø) 4 ±0.3 P1 3.85 ±0.7 F 64.8 -0, +2 H 16 ±0.5 P2 6.35 ±1.3 G H1 9 +0.76, -0.5 T 0.9 Max. H =J ±1.2 H2 0 ±2 W1 18 ±0.5 J =H ±1.2 L 11 Max. W2 0 +0.6 Max. K 0.8 Max. L1 1.5 Max. S 5 ±0.7 N 5 ±0.4 P 12.7 ±0.3 R 3.2 Min. No adhesive may be exposed Capacitance Tolerance Code 50.8~53.3 Code Tolerance Remark J ± 5.0 % C0G K ±10 % X7R, C0G M ± 20 % Z5U, X7R Z +80, -20% Z5U, Y5V Rated Voltage Code Code 250 500 101 Volt DC 25V DC 50V DC 100V Code B R F Packing Bulk Reel Pack Flat Pack How to Order(Product Identification) Packing Code CA 2633 Y5V 104 Z 500 F Reliability and Test Conditions Dimension Code Type Characteristic CR : Radial Lead Type The number shows the maximum length of "L" by 1/10 in millimeter, and the CA : Axial Lead Type alphabet means lead difference.(Refer to above diagram) Temperature Coefficient Code Temperature Characteristice Temperature Range Capacitance Change or Temperature Coefficient C0G -55 to 125℃ 0±30ppm/℃ X7R -55 to 125℃ ±15% Z5U 10℃ to 85℃ +22, -56% Y5V -30 to 85℃ +22, -82% Item Temperature Compensating Type 1. Operating Temperature Range C0G : -55 to +125℃ 2. Insulation Resistance More than 10,000MΩ or 500Ω.F(whichever is smaller) Applied the rated voltage for 2 minute 3. Dielectric Strength No detects or abnormalities - C0G : The rated voltage×300% - X7R, Z5U, Y5V : 〃 ×250% 4. Capacitance Within the specified tolerance Temperature Compensating Type 5. Dissipation Factor 30㎊ Min. : Q≥1,000(DF≤0.1%) Char. 50V Min. 25V X7R ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z%V ≤4.0% - ≤5% (<220㎋) Y5V ≤7% (≥220㎋) ≤ 7% Capacitance Code(Pico Farads) First two digits are significant ; third digit denotes number of zeros. High Dielectric Constant Type X7R : -55 to +125℃ Z5U : +10 to +85℃ Y5V : -30 to 85℃ ≤2.5% 16V 10V 6. www.samwha.com SAMWHA CAPACITOR Co., Ltd. Terminal Strength Testing Frequency Testing Voltage C0G (C≤1000pF) 1±0.1M㎐ 0.5 to 5V rms C0G (C >1000pF) 1±0.1k㎐ 1±0.2V rms X7R, Z5U, Y5V (C≤10㎌ 10V Min.) 1±0.1k㎐ 1±0.2V rms Cap. ≤3.5% ≤5.0% - - ≤9% (<220㎋) ≤12.5% ≤12.5% (≥220㎋) Ex.) 101 = 100㎊, 1R5 = 1.5㎊, 103 = 10,000㎊ 26 Test Methods and Conditions No. No evidence of damage to body of device of looseness of terminals. A static load of 10N(1kgf) : applied to one terminal in the axial direction and acting in a direction away from the body for 1 to 5 secs. Multi Layer Ceramic Capacitors 27 Radial & Axial Multi Layer Ceramic Capacitors Characteristic Item No. 7. Resistance Appearance to Capacitance Soldering Change Heat Dissipation Factor(or Q) I.R. 8. Temperature Appearance Cycle Capacitance Change Dissipation Factor(or Q) 9. Humidity Load Within ±2.5% or ±0.25pF X7R : ≤± 7.5% (whichever is larger) Z5U, Y5V : ≤± 20% 30㎊ Min. : Q≥1,000 (DF≤0.1%) Char. 50V Min. 25V X7R ≤ 2.5% ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z5U ≤4.0% 16V 10V ≤3.5% ≤5.0% - - - Immersion Time : 5±0.5sec - Take it out and set it for 24±2 hours(temperature compensating type)or 48±4hours(high dielectric constant type) then measure. No. Item 10 Dissipation High Temperature Factor(or Q) Load No marking defects Char. 50V Min. 25V Step X7R ≤ 2.5% ≤3% 30㎊ Max. : Q≥400+20C (DF≤1/(400+20C)) Z5U ≤4.0% - 16V 10V ≤3.5% ≤5.0% - - ≤9% ≤5% (<220㎋) (<220㎋) Y5V ≤7% ≤7% ≤12.5% ≤12.5% (≥220㎋) (≥220㎋) No marking defects Capacitance Change Within ±7.5% or±0.75㎊ (whichever is larger) 10㎊≤Cp≤30㎊: Q≥275+5/2C (DF≤1/(275+5/2C)) 1 2 3 4 Capacitance Capacitance Temperature Change Characteristics Min. Max. Temp. Operating Room Operating Room (℃) Temp. Temp. Temp. Temp. +0, -3 +3, -0 Time (min) 30±3 2 to 3 30±3 2 to 3 Char. 50V Min. 25V 16V 10V X7R ≤5% ≤5% ≤5% ≤5% Z5U ≤4.0% - - - Y5V ≤7.5% ≤10% (<1㎌) ≤12.5% ≤15% ≤7% (≥1㎌) Char. Temp. Range X7R -55 to +125℃ Z5U -10 to +85℃ Y5V Reference Temp. -30 to +85℃ Cap. Change Within ±15% 25℃ Within +22% -56% Within +22% -82% Take it out and set it for 24±2 hours [tempeature compensating or 48±4 hours(high dielectric Type) at room temperature, than measure. Take it out and set it for 24±2 hours (temperature compensatig) or 48±4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. (1) Temperature Compensating Type : The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5. (SL: +25 to 85℃) the capacitance shall be with in the specified tolerance for the temperature coefficient. The capacitance drift is calculated dividing the difference between the maximum measured values in the step 1, 3 and 5 by Cap, value in step 3. Step Temperature Coefficient Char. C0G - Temperature : 40±2℃ Temp. Range Temperature Coefficient -55 to ±30ppm/℃ +125℃ - Humidity : 90~95%RH X7R : Within ±12.5% Z5U : Within ±30% Y5V : Within + 30%, -40% (Y5V/1.0μF, 2.2μF, 4.7μF/10V) Within ±30% (others) Test Methods and Conditions High Dielectric Constant Type More than 1000MΩ or 50ΩF(Whichever is smaller) I.R. 11 Within±2.5% or ±0.25pF X7R : Within + 7.5% Z5U, Y5V : Within ± 20% 30㎊ Min. : Q≥350 (DF≤0.3%) 10㎊ Max. : Q≥200+10C (DF≤1/(200+10C)) More than 10,000MΩ or 500Ω.F (whichever & smaller) 30㎊ Min. : Q≥1,000 (DF≤0.1%) Temperature Compensating Type - ≤9% ≤5% (<220㎋) (<220㎋) Y5V ≤7% ≤7% ≤12.5% ≤12.5% (≥220㎋) (≥220㎋) Appearance www.samwha.com 10. High Appearance Temperature Capacitance Load change Characteristic - Soldering Temp : 260±5℃ No marked defect More than 10,000MΩ or 500Ω.F (Whichever is smaller) I.R. Test Methods and Conditions High Dielectric Constant Type I.R. Dissipation Factor(or Q) 28 Temperature Compensating Type Temperature(℃) 1 25±2 2 -55±3 3 25±2 4 125±3(for C0G) 5 25±2 - Hour : 500±12hrs 30㎊ Min. : Q≥200 (DF≤0.5%) Char. 50V Min. 25V 16V 10V X7R ≤5% ≤5% ≤5% ≤5% 30㎊ Max. : Q≥100+10/3C (DF≤1/(100+10/3C)) Z5U ≤4.0% - - - Y5V ≤10% (<1 ㎌) ≤7.5% ≤12.5% ≤12.5% ≤15% (≥1 ㎌) - Test Voltage : Tge rated voltage - Take it out and set it for 24±2 hours (temperature compensatig) or 48±4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA. (2) High Dielectric Constant Type : The ranges of capacitance change compared with the 25℃ value over the temperature range shown in the table shall be in the specified range. 12 The regulation of environmental pollution materials ※Never use materials mentioned below in leaded MLCC products regulated this document. Pb, Cd, Hg, Cr+6, PBB(polybromida biphenyl), PBDE(polybrominated diphenyl ethers), asbestos. 13 The regulation about destructive materials of the ozone layer Never use the ODS(ozone depleting substance) materials below in leaded MLCC products regulated this document. More than 500MΩ or 25Ω.F(whichever is smaller) No marked defect Within ±3% or±0.3㎊ (whichever is larger) SAMWHA CAPACITOR Co., Ltd. - Testing Time : 1000±12hrs X7R : Within ±12.5% , Z5U : Within ±30% Y5V : Within ±30%(Cap. < 1.0μF) Within +30% , -40%(Cap. ≥ 1.0μF) - Applied Voltage : Rated Voltage×200% - Temperature : C0G, X7R → 125±3℃ Z5U, Y5V → 85±3℃ Packing Quantity Unit : pcs Radial Type Axial Type Inner Box Outer Box Remark Inner Box Outer Box Remark 2,500 15,000 Packing set on the basis of flat tapping 5,000 50,000 Packing set on the basis of flat tapping Multi Layer Ceramic Capacitors 29 Multi Layer Ceramic Capacitors Capacitance Range Type Char. Cap(pF) Volt C0G 50 100 Radial X7R 50 100 Z5U 50 Y5V 16 50 C0G 50 Axial X7R Z5U 50 50 Y5V 50 1 2 3 4 5 6 7 8 9 10 12 15 Chip Beads & Inductors 16 18 20 22 24 27 Chip Ferrite Beads 32 Chip Ferrite Beads Arrays 51 Chip Ferrite Inductors 54 Chip Power Inductors 58 30 33 36 39 43 47 51 56 62 68 75 82 91 100 120 150 180 220 270 330 390 470 560 680 820 1.000 1.200 1.500 1.800 2.200 2.700 3.300 3.900 4.700 5.600 6.800 8.200 10.000 15.000 22.000 33.000 47.000 68.000 100.000 www.samwha.com 150.000 220.000 330.000 470.000 680.000 1.000.000 30 SAMWHA CAPACITOR Co., Ltd.