3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC • Supports LVDS Channel Link™ signaling • 10 shielded pairs (100 ohm) +2 drains for high bandwidth applications • 1 USB pair & 4 singles • High density 36 position MDR with rugged ribbon type contact • Metal junction shell with Quick Release Latches • EMI over-molded junction shell with rugged thumbscrew retention • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: October 9, 2007 TS-2102-B Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: Thumbscrew Shell Color: Thumbscrew Shell Material: Metal shell plating: Metal shell material: 30 μ″ [ 0.76 μm ] Min. Gold Beige Acrylonitrile Butadiene Styrene (ABS) Nickel Aluminum, .050" [1.27 mm] Thick Cable Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1A Insulation Resistance: > 1 × 108Ω at @100 VDC Withstanding Voltage: 350 VRMS for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20°C to +75°C UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ Channel Link is a trademark of National Semiconductor. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC Metal Latching Shell 36 Position High Density Mini D Ribbon (MDR) Male Plug 36 Position High Density Mini D Ribbon (MDR) Male Plug 10336 Cable (Shielded Twisted Pairs) 10336 2X Squeeze Release Latches 2X Squeeze Release Latches 32.0 1.3 32.0 1.3 LENGTH 39.8 1.6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 12.7 0.5 MDR 36 Position Plug Both Ends mm [Inch] Assembly Length Tolerance Tolerance Unless Noted mm 0.0 0.00 ± .1 ± .10 [ ] Dimensions for Reference only Generic End Detail MDR 36 Position Plug ( Both Ends ) Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length Ordering Information 14X36-SZ6B-XXX-0HC (RIA E1 & C1 apply) Backshell Options: T = Over-molded 4-40 thumbscrew 1 = Metal Latching Shell 3M Interconnect Solutions http://www.3M.com/interconnects/ Length: 100 = 1.0 meters 200 = 2.0 meters 500 = 5.0 meters TS-2102-B Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC Over-Molded #4-40 Thumbscrew 36 Position High Density Mini D Ribbon (MDR) Male Plug 36 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) 2X Thumbscrew #4-40 thread 2X Thumbscrew #4-40 thread 45.7 1.8 45.7 1.8 LENGTH (See ordering information) 45.7 1.8 2 1 6 4 3 5 7 8 10 12 14 16 18 9 11 13 15 17 14.5 0.6 19 21 23 25 27 29 31 33 35 20 22 24 26 28 30 32 34 36 37.6 1.5 Generic End Detail MDR 36 Position Plug mm [Inch] ( Both Ends ) Tolerance Unless Noted mm 0.0 0.00 ± .1 ± .10 [ ] Dimensions for Reference only Note: 1. Use 3341-31 jacksocket for mounting receptacle to panel. 3M Interconnect Solutions http://www.3M.com/interconnects/ Assembly Length Tolerance Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length TS-2102-B Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Cable Assembly .050″ High Speed Video Data Transmission System, 36 Position 14X36-SZ6B-XXX-0HC MDR 36 Position Pinout (F36-02) P1 Pair Signal Position P2 Position Signal Pair Pair W6 1 1 Signal Position Position Signal Pair A0- 1 13 USB Pwr W6 A0+ 19 31 Shld Gnd Drain 1 A0- 1 13 USB Pwr 1 A0+ 19 31 Shld Gnd Drain 2 A1- 2 14 A4- 6 2 A1- 2 14 A4- 6 2 A1+ 20 32 A4+ 6 2 A1+ 20 32 A4+ 6 3 A2- 3 15 A5- 7 3 A2- 3 15 A5- 7 3 A2+ 21 33 A5+ 7 3 A2+ 21 33 A5+ 7 4 CLK1- 4 16 A6- 8 4 CLK1- 4 16 A6- 8 4 CLK1+ 22 34 A6+ 8 4 CLK1+ 22 34 A6+ 8 5 A3- 5 17 A7- 9 5 A3- 5 17 A7- 9 5 A3+ 23 35 A7+ 9 5 A3+ 23 35 A7+ 9 Drain Shld Gnd 6 18 CLK2- 10 N/C 24 36 CLK2+ 10 N/C 7 Drain Shld Gnd 6 18 CLK2- 10 N/C 24 36 CLK2+ 10 N/C 7 N/C 25 N/C 25 N/C 8 N/C 8 N/C 26 N/C 26 N/C 9 N/C 9 W1 DDC Gnd 27 W1 DDC Gnd 27 W2 DDC/SCL 10 W2 DDC/SCL 10 W3 DDC/SDA 28 W3 DDC/SDA 28 W4 DDC Pwr 11 W4 DDC Pwr 11 W5 USB Gnd 29 W5 USB Gnd 29 SP1 USB+ 12 SP1 USB+ 12 SP1 USB- 30 SP2 USB- 30 Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped Aluminum out and in contact with six internal drains (logic ground). 3. Outer braid and foil (chassis ground) is isolated from inner drains (logic ground). TS-2102-B Sheet 4 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-c Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2007. All rights reserved. RIA-2217B-c 3M is a trademark of 3M Company.