CTD100, CDT100 Thyristor-Diode Modules, Diode-Thyristor Modules Symbol Test Conditions Characteristic Values Unit 15 mA IT, IF=300A; TVJ=25 C 1.74 V For power-loss calculations only (TVJ=TVJM) 0.85 V IRRM, IDRM TVJ=TVJM; VR=VRRM; VD=VDRM VT, VF VTO o 3.2 rT o m VD=6V; TVJ=25 C TVJ=-40oC 1.5 1.6 V VD=6V; TVJ=25oC TVJ=-40oC 100 200 mA VGD TVJ=TVJM; VD=2/3VDRM 0.25 V IGD TVJ=TVJM; VD=2/3VDRM 10 mA VGT IGT o IL TVJ=25 C; tp=30us; VD=6V IG=0.45A; diG/dt=0.45A/us 200 mA IH TVJ=25oC; VD=6V; RGK= 150 mA 2 us 185 us 170 uC 45 A o tgd TVJ=25 C; VD=1/2VDRM IG=0.45A; diG/dt=0.45A/us tq TVJ=TVJM; IT=150A; tp=200us; -di/dt=10A/us VR=100V; dv/dt=20V/us; VD=2/3VDRM QS TVJ=TVJM; IT, IF=50A; -di/dt=6A/us typ. IRM RthJC per thyristor/diode; DC current per module 0.22 0.11 K/W RthJK per thyristor/diode; DC current per module 0.42 0.21 K/W dS Creeping distance on surface 12.7 mm dA Creepage distance in air 9.6 mm a Maximum allowable acceleration 50 m/s2 FEATURES APPLICATIONS ADVANTAGES * International standard package * Direct copper bonded Al2O3-ceramic base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered, E 72873 * Gate-cathode twin pins for version 1 * DC motor control * Softstart AC motor controller * Light, heat and temperature control * Space and weight savings * Simple mounting with two screws * Improved temperature and power cycling * Reduced protection circuits DEECorp. CTD100, CDT100 Thyristor-Diode Modules, Diode-Thyristor Modules Fig. 1 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 2 i2dt versus time (1-10 ms) Fig. 2a Maximum forward current at case temperature 10 1: IGT, TVJ = 125o C V 2: IGT, TVJ = 25oC 3: IGT, TVJ = -40oC VG 3 2 1 6 5 1 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125o C 0.1 100 Fig. 3 Power dissipation versus on-state current and ambient temperature (per thyristor or diode) 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 4 Gate trigger characteristics 1000 TVJ = 25oC s tgd typ. 100 Limit 10 3 x CTD/CDT100 1 10 mA 100 1000 IG Fig. 5 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature Fig. 6 Gate trigger delay time DEECorp. CTD100, CDT100 Thyristor-Diode Modules, Diode-Thyristor Modules Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature 3 x CTD/CDT100 Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d DC 180oC 120oC 60oC 30oC RthJC (K/W) 0.22 0.23 0.25 0.27 0.28 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.0019 0.0477 0.344 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d RthJK (K/W) DC 180oC 120oC 60oC 30oC 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) ti (s) 0.0066 0.0678 0.1456 0.2 0.0019 0.0477 0.344 1.32 DEECorp.