SMD Common Mode Filters CTDLP2012F Series From 70 Ω to 220 Ω Not shown at actual size. ctparts.com SPECIFICATIONS Parts only available in ±25% impedance tolerance. Part Number CTDLP2012F-700 CTDLP2012F-900 Impedance ±25% Ω) (Ω 70 90 DCR Max. Ω) (Ω 0.60 0.70 Rated Current Max. (mA) 400 400 Rated Voltage Max. (V) 10 10 Insulation Resistance Min. Ω) (mΩ 100 100 CTDLP2012F-121 CTDLP2012F-181 CTDLP2012F-221 120 180 220 0.80 1.00 1.00 400 330 330 10 10 10 100 100 100 PHYSICAL DIMENSIONS Size RoHS Compliant mm inches L W T C1 C2 2.0±0.2 1.25±0.2 1.0±0.1 0.6±0.2 0.25±0.15 1.0±0.1 0.20±0.1 .05±.008 .04±.004 .02±.008 .01±.006 .04±.004 .008±.004 L CHARACTERISTICS D T C1 Technologies 03.24.06 CENTRAL M .08±.008 C2 Description: SMD Common Mode Filters Applications: Noise suppression in digital bus line equipment. IEEE 1394a HUB & IEEE 1394a control lines. USB host controller & USB, HUB control lines. Impedance Tolerance: ±25% Testing: Impedance is tested on an HP4285A at specified frequency Packaging: Tape & Reel Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. D Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice M W