Power Inductors - Shielded CTMP2 Series From 0.47 µH to 47 µH Not shown at actual size. RoHS Compliant Available ctparts.com SPECIFICATIONS Parts are available in ±20% tolerance only CTMP2F Please specify “F” for RoHS Compliant Part Number Inductance (µH) OCL (µH±20%) L Test Freq. (KHz) Q Fact. (Typ.) Q Test Freq. (KHz) Isat Peak (A) DCR @20°C Ω Max.) (Ω CTMP2_-R47 .47 0.40 100 10 300 3.4 0.075 CTMP2_-1R0 CTMP2_-1R5 CTMP2_-2R2 CTMP2_-3R3 CTMP2_-4R7 CTMP2_-6R8 1.0 1.5 2.2 3.3 4.7 6.8 1.02 1.59 2.29 3.58 4.60 7.02 100 100 100 100 100 100 20 25 32 42 46 46 300 300 300 300 300 300 2.1 1.7 1.4 1.1 1.0 0.8 0.103 0.118 0.130 0.156 0.180 0.202 CTMP2_-100 CTMP2_-150 CTMP2_-220 CTMP2_-330 CTMP2_-470 10 15 22 33 47 9.95 15.30 21.80 33.70 46.40 100 100 100 100 100 55 65 65 65 65 300 300 300 300 300 0.68 0.54 0.45 0.37 0.31 0.240 0.300 0.360 0.556 0.833 PHYSICAL DIMENSIONS Size mm inches A B C D Max. Max. Max. Max. 5.88 7.50 1.8 5.2 0.231 0.295 0.071 0.205 CHARACTERISTICS Description: SMD Low Profile Power Inductors Applications: Wireless and hand-held equipment applications such as PC cards, cellular telephones, pagers, GPS, and disk drives. Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +125°C Testing: Inductance & Q is tested on an HP4284A at specified frequency. OCL Test Parameters: 100KHz, 0.25 Vrms, 0.0 Adc Packaging: Bulk pack Marking: Marked with inductance code Miscellaneous: RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT CENTRAL Technologies 08.29.06 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice