CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media FEATURES · 0...-1 to 0...100 bar, 0...-15 to 0...1500 psi gage1 or absolute10 · For many industrial gases and liquids · 0...10 V, 0.5...4.5 V, 0...5 V, 1...6 V or 4...20 mA output · Field interchangeable · For industrial use MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L), ceramic AL2O3, NBR9 Housing: stainless steel,protection class IP 64 (according to DIN EN 60529) respectively NEMA 4X1 ELECTRICAL CONNECTION SPECIFICATIONS11,12 Maximum ratings 0...10 V, 0.5...4.5 V, 0...5 V, 1...6 V output Supply voltage (reverse polarity protection) 12...30 V CTx8...0 9...30 V CTx8...1, ...6, ...7 9...30 V CTx8...42 Maximum load current (source) CTx8...0, ...1, ...6, ...7 Temperature limits Storage Operating8 Compensated sensor 1 mA -55 to 100°C -40 to 100°C 0 to 70°C Vibration (5 to 500 Hz) Mechanical shock 3 December 2008 / 508 10 gRMS 50 g 2 x rated pressure 12 (9) to 30 V 1 Vout 2 -Vs 4 case 3 V GND 4...20 mA output +Vs 0 - 98 %RH Humidity limits Proof pressure +Vs sensor 1 N/C 2 -Vs 4 case 3 9 to 30 V V RL GND 1/6 www.sensortechnics.com CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media COMMON PERFORMANCE CHARACTERISTICS Characteristics Operating pressure Min. CTE8001... CTE8N01... CTE8P01... CTE8002... CTE8005... CTE8010... CTE8016... CTE8020... CTE8025... CTE8035... CTE8050... CTE8070... CTE8100... CTU8015... CTU8N15... CTU8P15... CTU8030... CTU8100... CTU8200... CTU8300... CTU8500... CTU8700... CTU81K0... CTU81K5... Typ. 0 -1 -1 0 0 0 0 0 0 0 0 0 0 0 -15 -15 0 0 0 0 0 0 0 0 1 +1 0 2 5 10 16 20 25 35 50 70 100 15 +15 0 30 100 200 300 500 700 1000 1500 Thermal effectss (0 to 70°C)4 Offset Span 0.02 0.02 Thermal effects (-40 to 0°C, 70 to 100°C) Offset Span 0.03 0.03 Non-linearity, hysteresis (BSL) and repeatability5 ±0.1 Long term stability6 ±0.3 Output noise (0 < f < 1 kHz) ±0.04 Response time (10 to 90 %) 1 Power supply rejection December 2008 / 508 Max. Offset CTx8...4 all others 0.05 0.002 Span CTx8...4 all others 0.08 0.002 0.05 0.05 Unit bar p si %FSO/°C ±0.3 %FSO 5 ms %FSO/V 2/6 www.sensortechnics.com CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media INDIVIDUAL PERFORMANCE CHARACTERISTICS 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset CT...8N... Min. Typ. Max. 4.9 5 5.1 0.03 0.1 all others 7 Full scale span CT...8N... 4.9 5 5.1 all others 9.9 10 10.1 Unit V 25 Ω 3 5 mA Min. Typ. Max. Unit CT...8N... 2.45 2.5 2.55 all others 0.45 0.5 0.55 CT...8N... 1.95 2 2.05 all others 3.95 4 4.05 Output impedance Current consumption (no load) 0.5...4.5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 25 Ω 3 5 mA Typ. Max. Unit Output impedance Current consumption (no load) V 0...5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Min. CT...8N... 2.45 all others Full scale span7 2.5 2.55 0.03 0.08 CT...8N... 2.45 2.5 2.55 all others 4.95 5.0 5.05 25 Ω 3 5 mA Unit Output impedance Current consumption (no load) V 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset 7 Full scale span Min. Typ. Max. CT...8N... 3.45 3.5 3.55 all others 0.95 1 1.05 CT...8N... 2.45 2.5 2.55 all others 4.95 5.0 5.05 25 Ω 3 5 mA Unit Output impedance Current consumption (no load) V 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Zero pressure offset 7 Full scale span Power consumption (IL = 20 mA) December 2008 / 508 Min. Typ. Max. CT...8N... 11.9 12.0 12.1 all others 3.9 4.0 4.1 CT...8N... 7.9 8.0 8.1 all others 15.9 16.0 16.1 250 mA mW 3/6 www.sensortechnics.com CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media Specification notes: 1. IP 64 protection is given when the connector is locked. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. 5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 6. Long term stability is the change in output after one year or 1 million pressure cycles. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Tests are in accordance with EN61000-6-2, April 1999. 9. Other material on special request. When using devices with optional nickel plated fittings, consider the media compatibility of the fittings also. 10. Available for pressure ranges from 1 bar (15 psi) absolute upwards only. 11. CE-labelling is in accordance with 89/336/EEC. 12. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. OUTLINE DRAWING NOM 72 (2.83) 52 (2.05) vent hole¹ 4 G 1/8" (BSP) 1 3 M12 x 1 connector 21.8 (0.86) diam. 6.5 (0.26) Detail A 2 Detail A 4.0 (0.16) diam. Output Pin o-ring grove for o-ring 11.8 x 1.8 (0.456 x 0.071) (ZA004029) mass: 72 g December 2008 / 508 1 2 3 4 0...10 V 0.5...4.5 V 0...5 V, 1...6 V +VS Vout case -Vs 4...20 mA +VS NC case -Vs dimensions in mm (inches) 4/6 www.sensortechnics.com CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media RECOMMENDED ACCESSORY (not included in delivery) ZK000101: ZP000112-B: Connector/cable assembly (different cable lenghts available) Mating Connector (without cable) NOM 2 m PIN CONNECTION (other cable lenghts on request) 36.5 NOM 60 Shield Pin Flying lead end 1 Brown 2 Green 3 White and shield 4 Yellow Vent tube Note: For proper function of all gage devices the vent tube must have access to the ambient atmosphere. M12x1 Ø 20 OPTIONAL PRESSURE FITTINGS (brass, nickel plated) B Male fittings C dimensions in mm LOAD LIMITATION 4...20 mA output version 1400 Ohm 1200 A D 1000 800 Female fittings op e ra ratin ng g e 600 G F 400 200 E H 0 B 8 (0.315) 12 (0.472) 11.5 (0.453) 16 (0.630) 12.5 (0.492) 8.5 (0.335) 12.5 (0.492) 10 (0.394) 14 (0.551) December 2008 / 508 C 13 (0.512) 5.5 (0.217) 5 (0.197) 7 (0.276) 11 (0.433) 5 (0.197) 7 (0.276) 13 (0.512) 6 (0.236) 9 16 20 25 30 V supply voltage Dimensions in mm (inches) Dimensions in mm (inches) A 1/8" BSPT 1/4" BSPT 3/8" BSPT 1/2" BSPT 1/8" BSP 1/4" BSP 3/8" BSP 1/8" NPT 1/4" NPT 5 D (Hex.) 14 (9/16") 14 (9/18") 17 (11/16") 22 (7/8") 14 (9/16") 19 (3/4") 22 (7/8") 17 (11/16") 22 (7/8") E 1/8" BSP 1/4" BSP 3/8" BSP 1/2" BSP F 5 (0.197) 7 (0.276) 6 (0.236) 18 (0.707) G 15 (0.591) 20 (0.787) 20 (0.787) 23 (0.906) H (Hex.) 14 (9/16") 17 (11/16") 22 (7/8") 24 (15/16") 5/6 www.sensortechnics.com CTE8000 / CTU8000 Series OEM pressure transmitters for industrial media ELECTROMAGNETIC CAPABILITY8 Test conditions Criterion Interference Radiated, radio frequency EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz A <1 %FSO electromagnetic field immunity (RFI) 80 % AMC (1 kHz) Electrical fast transient / EN61000-4-4: Grade 3, ±2 kV B <1 %FSO burst immunity (EFT) Electrostatic discharge immunity EN61000-4-2: Grade 4, ±8 kV, contact discharge B <1 %FSO test (ESD) Immunity to conducted disturbances EN61000-4-6: Grade 3, 0.15 to 80 MHz A <1 %FSO induced by radio-frequency fields 10 V, 80 % AMC (1 kHz) ORDERING INFORMATION CTx8 E: U: xxx bar calibration psi calibration CTE8000 series 001: 0 to 1 bar N01: -1 to +1 bar P01: 0 to -1 bar 002: 0 to 2 bar 005: 0 to 5 bar 010: 0 to 10 bar 016: 0 to 16 bar 020: 0 to 20 bar 025: 0 to 25 bar 035: 0 to 35 bar 050: 0 to 50 bar 070: 0 to 70 bar 100: 0 to 100 bar CTU8000 series 015: 0 to 15 N15: -15 to +15 P15: 0 to -15 030: 0 to 30 100: 0 to 100 200: 0 to 200 300: 0 to 300 500: 0 to 500 700: 0 to 700 1K0: 0 to 1000 1K5: 0 to 1500 Pressure mode G: gage pressure 1 A: absolute pressure 10 Note: psi psi psi psi psi psi psi psi psi psi psi x x x Output signal 0: 0...10 V 1: 1...6 V 4: 4...20 mA 6: 0.5...4.5 V 7: 0...5 V Fitting size D: 1/8" BSPT E: 1/4" BSPT F: 3/8" BSPT G: 1/2" BSPT male, male, male, male, brass, brass, brass, brass, nickel nickel nickel nickel plated plated plated plated K: L: M: N: 1/8" 1/4" 1/8" 1/4" NPT male, brass NPT male, brass NPT male, SS 1.4305 (303) NPT male, SS 1.4305 (303) P: Q: R: S: G G G G 1/8" 1/4" 3/8" 1/2" (BSP) (BSP) (BSP) (BSP) male, male, male, male, U: V: W: X: G G G G 1/8" 1/4" 3/8" 1/2" (BSP) (BSP) (BSP) (BSP) female, female, female, female, Y: G 1/8" (BSP) male, SS 1.4404 (316) no optional fitting brass, brass, brass, brass, nickel nickel nickel nickel brass, brass, brass, brass, plated plated plated plated nickel nickel nickel nickel plated plated plated plated Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. December 2008 / 508 6/6 www.sensortechnics.com