Video Video Surveillance/Security Applications 8-Channel Audio/Video Decoder for Video Surveillance Systems CX25838 Conexant’s portfolio includes a comprehensive suite of semiconductor solutions for communications and consumer applications. High Quality Audio and Video Decoders for Surveillance Applications The CX25838 eight-channel audio/video decoder was designed for surveillance applications. The CX25838 contains eight high quality NTSC/PAL video decoders with 10-bit A/Ds and 5-line comb filtering, to generate the highest quality digital video output with the lowest possible noise. This creates not only the best image quality for viewing, but enables lower bitrates for compression devices using the output of the CX25838. The video decoders within the CX25838 are optimized to lock to inputs with low signal levels as well as line-locked cameras, both of which are common in surveillance systems. Each video decoder may be scaled independently and the CX25838 supports BT.656 as well as a variety of other interleaved digital video output formats. The CX25838 also contains eight high-quality mono audio A/Ds with I2S outputs. Direct-Connection to Multi-Channel H.264 CODECs The CX25838 supports byte, line, or frame-interleaved digital video outputs at 27, 54, or 108 MHz. Byte and line interleaved outputs are supported entirely within the CX25838. Frame-interleaved outputs require that the CX25838 interface with external DDR2 memory. The CX25838 supports I2S and multiplexed I2S audio outputs. Additional Features There are two variants of the CX25838 offered — one with the external DDR2 interface, and one without the interface. When equipped with DDR2, the CX25838 supports frame-interleaved video outputs, as well as a 2x2 CIF tiling mode, in which four CIF images are tiled into a single D1 stream. Distinguishing Features • Eight High-Quality NTSC/PAL video decoders: - Anti-alias filters - 10-bit A/Ds - 5-line comb filtering - Independent scaling • Eight Mono audio A/Ds - Variable sample rates - I2S outputs • Flexible digital video output formats at 27, 54, and 108 MHz - Byte-interleaved - Line-interleaved - Frame-interleaved (requires external DDR2 memory) For systems that require resolutions of half-D1 or lower, two CX25838 devices may be cascaded together to share external memory and CODEC interfaces. • Tiling and cascading functions (requires external DDR2 memory) The CX25838 includes programmable motion detection logic, which can trigger flags over GPIO pins when motion is detected on incoming analog video streams. • 48 GPIO pins The CX25838 contains 48 GPIO pins, which maximize flexibility and allow customization to a variety of applications and designs. The I2C interface and motion detection flags are supported via GPIOs. • Programmable Motion Detection Part Number CX25838 Description 8-Channel Audio/Video Decoder for Surveillance Systems Video Video Surveillance/Security Applications DDR2 Memory (Optional) Digital Video I/O Analog Video Decoders 8 CVBS Inputs 8x Composite NTSC/PAL 1 Input/Decoder 10-bit A/Ds 5-line Comb Filters Optimized for Low-level Inputs and Line-locked Cameras Independently Scaleable BT.656/VIP2.0 DDR2 Interface (Optional) 16-bit Data DDR2 Required for Frame-Interleaving and Tiling Configurable: 4x BT.656 @ 27, 54 and 108 MHz; Byte, Line, or Frame-interleaved Data1[7:0], Clk1 Data2[7:0], Clk2 Data3[7:0], Clk3 Data4[7:0], Clk4 Mux-able I2S Digital Audio I/O I2S 16-bit @ 8, 16, 32, 44.1, or 48 KHz; Multiplex-able Mux-able I2S Mux-able I2S Mux-able I2S 8 Mono Basedband Audio Inputs Broadband Audio A/Ds 8x Mono (4x Stereo) Luma-Based Motion Detection (x8) PLL GPIOs 48 Total GPIO Pins I2C Control Pins Interrupts I2C Motion and Board Level Interrupts External Crystal CX25838 Block Diagram The CX25838-1x (contains DDR2 interface) is offered in a 23mm x 23mm, 288 pin fpBGA package. The CX25838-2x (no DDR2 interface) is offered in a 14mm X 14mm, 233 pin fpBGA package. Conexant Product Portfolio Conexant’s comprehensive product portfolio includes solutions for imaging, audio, video, and embedded-modem applications. © 2008 Conexant Systems, Inc. All Rights Reserved. Conexant and the Conexant logo are registered trademarks of Conexant Systems, Inc. All other trademarks are owned by their respective owners. Although Conexant strives for accuracy in all its publications, this material may contain errors or omissions and is subject to change without notice. This material is provided AS IS and without any express or implied warranties, including merchantability, fitness for a particular purpose and non-infringement. Conexant shall not be liable for any special, indirect, incidental or consequential damages as a result of its use. 08-2834 www.conexant.com General Information: U.S. and Canada: (888) 855-4562 International: 1+ (949) 483-3000 Headquarters 4000 MacArthur Blvd. Newport Beach, CA 92660 Doc# PBR-202314