CXP86400/86490 CMOS 8-bit Single Chip Microcomputer Description The CXP86400/86490 are CMOS 8-bit single chip microcomputers that serve as both piggyback and evaluator. The CXP86400/86490 are developed for evaluating the function of the CXP86440/86448/86460. Note that the CXP86400 corresponds to the fixed font and the CXP86490 corresponds to the custom font respectively. 64 pin PQFP (Ceramic) Piggyback/ evaluator type 64 pin PSDIP (Ceramic) Features • A wide instruction set (213 instructions) which covers various types of data Structure – 16-bit operation/multiplication and division/ Boolean Silicon gate CMOS IC bit operation instructions • Minimum instruction cycle 250ns at 16MHz operation 122µs at 32kHz operation • Applicable EPROM LCC type 27C512 (Maximum 60K bytes are available.) • Incorporated RAM 1536 bytes (Excludes VRAM for on-screen display and sprite RAM) • EPROM for custom font (CXP86490 only) LCC27C512 (Maximum 12K bytes are available.) • Peripheral functions – A/D converter 8 bits, 6 channels, successive approximation method (Conversion time of 1.6µs at 16MHz) – Serial interface 8-bit clock sync type, 1 channel – Timer 8-bit timer 8-bit timer/counter 19-bit time base timer 32kHz timer/ counter – On-screen display (OSD) 12 × 16 dots, 384 character types, 15 character colors, 24 characters × 2 lines frame background 8 colors/half blanking background on full screen 15 colors/half blanking edging/shadowing/rounding for every line background with shadow for every character/ double scanning sprite OSD; 12 × 16 dots, 1 screen, 8 colors for every dot – I2C bus interface – PWM output 8 bits, 8 channels 14 bits, 1 channel – Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO – HSYNC counter – Watchdog timer • Interruption 13 factors, 13 vectors, multi-interruption possible • Standby mode SLEEP • Package CXP86400 64-pin ceramic PQFP CXP86490 64-pin ceramic PSDIP (Supports custom font) Note) Mask option depends on the type of the CXP86400/86490. Refer to the Product List for details. Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. –1– E96643-PS CXP86400/86490 PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 58 57 56 55 54 53 52 PF2/PWM2 PC3 61 60 59 PC2 63 62 PC1 PD7/EC 64 PC0 PD6/RMC CXP86400 Pin Assignment in Piggyback Mode (Top View) PF4/SCL0 SI/PD3 3 49 PF5/SCL1/PWM4 SO/PD2 4 48 PF6/SDA0 SCK/PD1 5 47 PF7/SDA1/PWM5 INT2/PD0 6 46 PE0/TO/ADJ 45 PE1/PWM 44 PE2/TEX/INT0 HSYNC/PA7 7 4 3 2 1 A13 50 A14 2 VDD HS0/PD4 NC PF3/PWM3 A15 51 A12 1 A7 HS1/PD5 32 31 30 A6 5 29 A8 A5 6 28 A9 A4 7 27 A11 VSYNC/PA6 8 RST 9 A3 8 26 NC 43 PE3/TX VSS 10 A2 9 25 OE 42 VSS XTAL 11 A1 10 24 A10 41 VDD A0 11 23 CE 40 NC NC 12 22 D7 D0 13 21 D6 39 EXLC 38 XLC EXTAL 12 PA5/AN5 13 PA4/AN4 14 PA3/AN3 15 37 PE4/YM PA2/AN2 16 36 PE5/YS PA1/AN1 17 35 PE6/I PA0/AN0 18 34 B PB7 19 33 G R 31 32 PB0 PG3 PB1 PG4 PB2 28 29 30 PG5 D5 27 PG6 D4 25 26 INT1/PG7 D3 24 PB3 NC 22 23 PB4 GND 21 PB5 D2 20 PB6 D1 14 15 16 17 18 19 20 Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. –2– CXP86400/86490 PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 58 57 56 55 54 53 52 PF2/PWM2 PC3 61 60 59 PC2 63 62 PC1 PD7/EC 64 PC0 PD6/RMC CXP86400 Pin Assignment in Evaluator Mode (Top View) PF4/SCL0 SI/PD3 3 49 PF5/SCL1/PWM4 SO/PD2 4 48 PF6/SDA0 SCK/PD1 5 47 PF7/SDA1/PWM5 INT2/PD0 6 46 PE0/TO/ADJ 45 PE1/PWM 44 PE2/TEX/INT0 HSYNC/PA7 7 4 3 2 1 A13 50 A14 2 VDD HS0/PD4 NC PF3/PWM3 A15 51 A12 1 A7/D7 HS1/PD5 32 31 30 A6/D6 5 29 A8 A5/D5 6 28 A9 A4/D4 7 27 A11 VSYNC/PA6 8 RST 9 A3/D3 8 26 NC 43 PE3/TX VSS 10 A2/D2 9 25 HALT 42 VSS XTAL 11 A1/D1 10 24 A10 41 VDD A0/D0 11 23 E/P 40 NC NC 12 22 I/T RD 13 21 MON 39 EXLC 38 XLC EXTAL 12 PA5/AN5 13 PA4/AN4 14 PA3/AN3 15 37 PE4/YM PA2/AN2 16 36 PE5/YS PA1/AN1 17 35 PE6/I PA0/AN0 18 34 B PB7 19 33 G R 31 32 PB0 PG3 PB1 PG4 PB2 28 29 30 PG5 RST 27 PG6 C1 25 26 INT1/PG7 C2 24 PB3 NC 22 23 PB4 GND 21 PB5 SYNC 20 PB6 WR 14 15 16 17 18 19 20 Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. –3– CXP86400/86490 1 PC2 2 PC1 3 A5 A4 A3 A1 A6 63 PC5 62 PC6/PWM6 A12 61 PC7/PWM7 60 PF0/PWM0 59 PF1/PWM1 58 PF2/PWM2 57 PF3/PWM3 5 GND 16 NC 17 D3 8 5 3 EC/PD7 HS0/PD4 6 A7 15 7 7 4 D2 HS1/PD5 8 PC4 14 4 6 9 64 D1 PC0 RMC/PD6 A0 13 12 11 10 A2 PC3 NC D0 CXP86490 Pin Assignment in Piggyback Mode (Top View) 2 A15 1 NC 18 32 VDD D4 19 31 A14 D5 20 30 A13 For custom font 21 22 23 24 25 26 27 28 29 53 PF7/SDA1/PWM5 HSYNC/PA7 13 52 PE0/TO/ADJ VSYNC/PA6 14 51 PE1/PWM 50 PE2/TEX/INT0 49 PE3/TX 48 VSS RST 15 VSS 16 XTAL 17 9 8 7 6 A6 A0 NC D0 13 12 11 10 A8 12 A9 INT2/PD0 A5 PF6/SDA0 NC 54 A11 11 A4 SCK/PD1 A3 PF5/SCL1/PWM4 OE 55 A2 10 A10 SO/PD2 A1 PF4/SCL0 CE 56 D7 9 D6 SI/PD3 5 D1 14 4 A7 D2 15 3 A12 GND 16 2 A15 NC 17 1 NC D3 18 32 VDD 31 A14 47 VDD 30 A13 46 NC EXTAL 18 D4 19 PA5/AN5 19 D5 20 For custom font 21 22 23 24 25 26 27 28 29 41 PE6/I PB7 25 40 B 39 G PB6 26 13 12 11 10 9 A8 24 A6 PA0/AN0 A9 PE5/YS A5 42 NC 23 A11 PA1/AN1 A4 PE4/YM A3 43 OE 22 A2 PA2/AN2 A10 XLC A1 44 CE 21 A0 PA3/AN3 D7 EXLC D6 45 NC 20 D0 PA4/AN4 8 7 6 5 D1 14 4 A7 D2 15 3 A12 16 2 A15 38 R 37 PB0 36 PB1 35 PB2 34 PG3 33 PG4 PB5 27 GND PB4 28 NC 17 1 NC D3 18 32 VDD D4 19 31 A14 D5 20 30 A13 A8 A9 32 NC PG5 A11 31 D6 PG6 21 22 23 24 25 26 27 28 29 OE 30 A10 INT1/PG7 CE 29 D7 PB3 For programming Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. –4– CXP86400/86490 SO/PD2 10 SCK/PD1 11 INT2/PD0 12 HSYNC/PA7 13 14 RST 15 VSS 16 XTAL 17 EXTAL 18 A6 A5 A4 A3 17 1 NC 60 PF0/PWM0 59 PF1/PWM1 58 PF2/PWM2 57 PF3/PWM3 56 PF4/SCL0 55 PF5/SCL1/PWM4 54 PF6/SDA0 53 PF7/SDA1/PWM5 52 PE0/TO/ADJ For custom font D3 18 32 VDD D4 19 31 A14 D5 20 30 A13 21 22 23 24 25 26 27 28 29 13 12 11 10 VSYNC/PA6 A2 A0 A1 NC A8 9 PC7/PWM7 A15 A6 SI/PD3 61 A12 9 8 7 A9 8 PC6/PWM6 2 A5 HS0/PD4 62 3 NC 7 PC5 16 A11 HS1/PD5 63 15 A4 6 PC4 D2 A3 RMC/PD6 5 64 GND OE 5 6 A7 A2 EC/PD7 7 4 A10 4 8 14 A1 PC0 9 D1 CE 3 A0 PC1 13 12 11 10 D7 2 D6 PC2 NC 1 D0 PC3 NC D0 CXP86490 Pin Assignment in Evaluator Mode (Top View) 6 5 D1 14 4 A7 51 PE1/PWM 50 PE2/TEX/INT0 49 PE3/TX 48 VSS 47 VDD 46 NC D2 15 3 A12 GND 16 2 A15 NC 17 1 NC For custom font D3 18 32 VDD D4 19 31 A14 D5 20 30 A13 PA5/AN5 19 PA4/AN4 20 45 EXLC PA3/AN3 21 44 XLC PA2/AN2 22 43 PE4/YM PA1/AN1 23 42 PE5/YS PA0/AN0 24 41 PE6/I PB7 25 40 B G 30 PG6 31 PG5 32 A8 A6/D6 A9 A5/D5 NC A11 A4/D4 A3/D3 OE A2/D2 A10 A1/D1 CE A0/D0 D6 D7 NC RD 16 2 NC 17 1 NC C2 18 32 VDD C1 19 31 A14 RST 20 30 A13 For programming 21 22 23 24 25 26 27 28 29 MON INT1/PG7 GND PB0 36 PB1 35 PB2 34 PG3 33 PG4 Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. –5– R 37 A8 29 3 A9 PB3 5 15 NC 28 6 SYNC A11 PB4 7 A7/D7 39 A12 38 A15 HALT 27 8 4 A10 PB5 9 14 E/P 26 13 12 11 10 WR I/T PB6 21 22 23 24 25 26 27 28 29 CXP86400/86490 EPROM Read Timing (Ta = –20 to +75°C, VDD = 4.5 to 5.5V, Vss = 0V) Item Symbol Pins Min. Address → data input delay time tACC A0 to A15 D0 to D7 Address → data hold time tIH A0 to A15 D0 to D7 Max. Unit 75 ns ns 0 0.8VDD A0 to A15 Address data 0.2VDD tACC tIH 0.8VDD D0 to D7 Input data 0.2VDD Product List Products Mask Optional item CXP86212 CXP86216 CXP86324 CXP86332 CXP86440 CXP86448 CXP86460 CXP86540 CXP86548 CXP86560 64-pin plastic SDIP/QFP/LQFP Package Oscillation clock ROM capacity 16MHz 12K bytes 16K bytes 24K bytes 32K bytes Reset pin pull-up resistor 40K bytes User data Products Piggyback/evaluator CXP86400-U01Q CXP86490-U01S Package 64-pin ceramic PQFP Oscillation clock 64-pin ceramic PSDIP 16MHz ROM capacity EPROM 60K bytes Reset pin pull-up resistor Existent Font data 60K bytes Existent/Non existent Font data Optional item 48K bytes Fixed EPROM 12K bytes –6– 40K bytes 48K bytes 60K bytes CXP86400/86490 CXP86400 Piggyback mode and evaluator mode can be switched as shown below. Evaluator mode Piggyback mode LCC type EPROM CPU probe CXP86400 Pin 1 marking Pin 1 index EPROM Pin 1 marking Note) Note) Evaluation cap should be connected to the CPU probe. CXP86490 Piggyback mode and evaluator mode can be switched as shown below. LCC type EPROM CXP86490 CPU probe EPROM Pin 1 marking Pin 1 index Two custom font EPROMs (same contents) Note) Evaluation cap should be connected to the CPU probe. Pin 1 marking Evaluator mode Piggyback mode –7– CXP86400/86490 Package Outline Unit: mm CXP86400 64PIN PQFP (CERAMIC) PIN No. 1 INDEX 18.7 ± 0.5 INDEX PIN No.1 INDEX 16.3 ± 0.2 64 51 1.0 ± 0.05 1 64 51 1 33 19 14.22 18.12 ± 0.2 12.02 1.05 0.7 0.4 ± 0.08 0.3 6.0 1.27 ± 0.13 4.5 22.3 ± 0.25 24.7 ± 0.5 52 52 32 9.48 32 0.75 20 1.3 ± 0.3 33 19 20 0.6 0.9 11.66 15.58 ± 0.2 PACKAGE STRUCTURE PACKAGE MATERIAL PQFP-64C-L02 LEAD TREATMENT GOLD PLATING EIAJ CODE AQFP064-C-0000-B LEAD MATERIAL 42 ALLOY PACKAGE WEIGHT 5.2g 9.8 MAX + 0.05 0.15 – 0.02 JEDEC CODE 3.57 ± 0.36 CERAMIC SONY CODE CXP86490 64PIN PSDIP (CERAMIC) 70.98 ± 0.55 15.58 ± 0.2 19.05 ± 0.25 18.12 ± 0.2 32 + 0.05 0.25 – 0.02 1 18.57 ± 0.25 33 18.12 ± 0.2 64 1.27 ± 0.13 1.778 ± 0.1 3.43 ± 0.38 0.46 ± 0.08 0.9 1.27 ± 0.25 11.24 MAX PIN NO.1 INDEX PACKAGE STRUCTURE PACKAGE MATERIAL PSDIP-64C-02 LEAD TREATMENT GOLD PLATING EIAJ CODE ADIP064-C-0750-B LEAD MATERIAL 42 ALLOY PACKAGE WEIGHT 22.8g JEDEC CODE –8– CERAMIC SONY CODE