CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 D D D D D D D T/R A0 A1 A2 A3 A4 A5 A6 A7 GND 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC OE B0 B1 B2 B3 B4 B5 B6 B7 CY54FCT245T . . . L PACKAGE (TOP VIEW) A2 A3 A4 A5 A6 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 B0 B1 B2 B3 B4 A7 GND B7 B6 B5 description OE D CY54FCT245T . . . D PACKAGE CY74FCT245T . . . P, Q, OR SO PACKAGE (TOP VIEW) T/R VCC D Function, Pinout, and Drive Compatible With FCT and F Logic Reduced VOH (Typically = 3.3 V) Versions of Equivalent FCT Functions Edge-Rate Control Circuitry for Significantly Improved Noise Characteristics Ioff Supports Partial-Power-Down Mode Operation ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) Matched Rise and Fall Times Fully Compatible With TTL Input and Output Logic Levels CY54FCT245T – 48-mA Output Sink Current 12-mA Output Source Current CY74FCT245T – 64-mA Output Sink Current 32-mA Output Source Current 3-State Outputs A1 A0 D The ’FCT245T devices contain eight noninverting bidirectional buffers with 3-state outputs and are intended for bus-oriented applications. The transmit/receive (T/R) input determines the direction of data flow through these bidirectional transceivers. Transmit (active high) enables data from A ports to B ports. The output enable (OE), when high, disables both the A and B ports by putting them in the high-impedance state. These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 ORDERING INFORMATION TOP-SIDE MARKING Tape and reel 3.8 CY74FCT245DTQCT FCT245D QSOP – Q Tape and reel 4.1 CY74FCT245CTQCT FCT245C Tube 4.1 CY74FCT245CTSOC Tape and reel 4.1 CY74FCT245CTSOCT DIP – P Tube 4.6 CY74FCT245ATPC CY74FCT245ATPC QSOP – Q Tape and reel 4.6 CY74FCT245ATQCT FCT245A Tube 4.6 CY74FCT245ATSOC Tape and reel 4.6 CY74FCT245ATSOCT Tape and reel 7 CY74FCT245TQCT Tube 7 CY74FCT245TSOC Tape and reel 7 CY74FCT245TSOCT SOIC – SO QSOP – Q SOIC – SO –55°C 55°C to 125°C ORDERABLE PART NUMBER QSOP – Q SOIC – SO –40°C to 85°C SPEED (ns) PACKAGE† TA FCT245C FCT245A FCT245 CDIP – D Tube 4.5 CY54FCT245CTDMB LCC – L Tube 4.5 CY54FCT245CTLMB CDIP – D Tube 4.9 CY54FCT245ATDMB LCC – L Tube 4.9 CY54FCT245ATLMB CDIP – D Tube 7.5 CY54FCT245TDMB LCC – L Tube 7.5 FCT245 CY54FCT245TLMB † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE INPUTS OE T/R OPERATION L L B data to bus A L H A data to bus B H X Z H = High logic level, L = Low logic level, X = Don’t care, Z = High-impedance state logic diagram (positive logic) T/R 1 19 A0 2 18 To Seven Other Channels 2 OE POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 B0 CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range to ground potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V DC input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V DC output voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V DC output current (maximum sink current/pin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mA Package thermal impedance, θJA (see Note 1): P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W Q package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68°C/W SO package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W Ambient temperature range with power applied, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 135°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 2) CY74FCT245T CY74FCT245AT CY74FCT245CT CY74FCT245DT CY54FCT245T UNIT MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 0.8 V High-level output current –12 –32 mA IOL TA Low-level output current 48 64 mA 85 °C High-level input voltage 2 Operating free-air temperature –55 2 125 –40 V V NOTE 2: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH CY54FCT245T TYP† MAX TEST CONDITIONS VCC = 4.5 V, VCC = 4.75 V, IIN = –18 mA IIN = –18 mA VCC = 4.5 V, IOH = –12 mA IOH = –32 mA VCC = 4 4.75 75 V MIN –0.7 –1.2 –0.7 2.4 2.4 Vhys All inputs II VCC = 5.5 V, VCC = 5.25 V, VIN = VCC VIN = VCC 5 IIH VCC = 5.5 V, VCC = 5.25 V, VIN = 2.7 V VIN = 2.7 V ±1 IIL VCC = 5.5 V, VCC = 5.25 V, VIN = 0.5 V VIN = 0.5 V ±1 IOZH VCC = 5.5 V, VCC = 5.25 V, VOUT = 2.7 V VOUT = 2.7 V 10 IOZL VCC = 5.5 V, VCC = 5.25 V, VOUT = 0.5 V VOUT = 0.5 V –10 IOS‡ VCC = 5.5 V, VCC = 5.25 V, VOUT = 0 V VOUT = 0 V VCC = 0 V, VCC = 5.5 V, VOUT = 4.5 V VIN ≤ 0.2 V, ∆ICC 0.3 0.3 0.2 0.55 0.2 ±1 ±1 10 –10 –120 –225 –60 –120 ±1 VIN ≥ VCC – 0.2 V VIN ≥ VCC – 0.2 V 0.1 0.5 V V 5 VIN ≤ 0.2 V, VCC = 5.5 V, VIN = 3.4 V§, f1 = 0, Outputs open VCC = 5.25 V, 3.3 0.55 IOL = 64 mA –60 V V 2 IOH = –15 mA IOL = 48 mA VCC = 4.5 V, VCC = 4.75 V, ICC –1.2 UNIT 3.3 VOL Ioff CY74FCT245T TYP† MAX MIN –225 ±1 0.2 0.1 0.2 0.5 2 µA µA µA µA µA mA µA mA 2 mA VCC = 5.25 V, VIN = 3.4 V§, f1 = 0, Outputs open VCC = 5.5 V, One input switching at 50% duty cycle, Outputs open, T/R or OE = GND and VIN ≤ 0.2 V or VIN ≥ VCC – 0.2 V 0.06 0.12 mA/ MHz VCC = 5.25 V, One input switching at 50% duty cycle, Outputs open, T/R or OE = GND and 0.06 0.12 VIN ≤ 0.2 V or VIN ≥ VCC – 0.2 V † Typical values are at VCC = 5 V, TA = 25°C. ‡ Not more than one output should be shorted at a time. Duration of short should not exceed one second. The use of high-speed test apparatus and/or sample-and-hold techniques are preferable to minimize internal chip heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output can raise the chip temperature well above normal and cause invalid readings in other parametric tests. In any sequence of parameter tests, IOS tests should be performed last. § Per TTL-driven input (VIN = 3.4 V); all other inputs at VCC or GND ¶ This parameter is derived for use in total power-supply calculations. ICCD¶ 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) (continued) PARAMETER CY54FCT245T TYP† MAX TEST CONDITIONS VCC = 5.5 V, Outputs open, open T/R or OE = GND IC# VCC = 5.25 V, Outputs open, open T/R or OE = GND MIN CY74FCT245T TYP† MAX MIN One bit switching at f1 = 10 MHz at 50% duty cycle VIN ≤ 0.2 V or VIN ≥ VCC – 0.2 V 0.7 1.4 VIN = 3.4 V or GND 1.2 3.4 Eight bits switching at f1 = 2.5 MHz at 50% duty cycle VIN ≤ 0.2V or VIN ≥ VCC – 0.2 V 1.3 2.6|| VIN = 3.4 V or GND 3.3 10.6|| One bit switching at f1 = 10 MHz at 50% duty cycle VIN ≤ 0.2 V or VIN ≥ VCC – 0.2 V 0.7 1.4 VIN = 3.4 V or GND 1.2 3.4 Eight bits switching at f1 = 2.5 MHz at 50% duty cycle VIN ≤ 0.2V or VIN ≥ VCC – 0.2 V 1.3 2.6|| VIN = 3.4 V or GND 3.3 10.6|| UNIT mA Ci Co † Typical values are at VCC = 5 V, TA = 25°C. # IC = ICC + ∆ICC × DH × NT + ICCD (f0/2 + f1 × N1) Where: = Total supply current IC ICC = Power-supply current with CMOS input levels ∆ICC = Power-supply current for a TTL high input (VIN = 3.4 V) DH = Duty cycle for TTL inputs high NT = Number of TTL inputs at DH ICCD = Dynamic current caused by an input transition pair (HLH or LHL) f0 = Clock frequency for registered devices, otherwise zero f1 = Input signal frequency N1 = Number of inputs changing at f1 All currents are in milliamperes and all frequencies are in megahertz. || Values for these conditions are examples of the ICC formula. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 10 5 10 pF 9 12 9 12 pF 5 CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 switching characteristics over operating free-air temperature range (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A or B B or A tPZH tPZL OE or T/R A or B tPHZ tPLZ OE or T/R A or B CY54FCT245T CY54FCT245AT CY54FCT245CT MIN MAX MIN MAX MIN MAX 1.5 7.5 1.5 4.9 1.5 4.5 1.5 7.5 1.5 4.9 1.5 4.5 1.5 10 1.5 6.5 1.5 6.2 1.5 10 1.5 6.5 1.5 6.2 1.5 10 1.5 6 1.5 5.2 1.5 10 1.5 6 1.5 5.2 UNIT ns ns ns switching characteristics over operating free-air temperature range (see Figure 1) 6 PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A or B B or A tPZH tPZL OE or T/R A or B tPHZ tPLZ OE or T/R A or B CY74FCT245T CY74FCT245AT CY74FCT245CT CY74FCT245DT MIN MAX MIN MAX MIN MAX MIN MAX 1.5 7 1.5 4.6 1.5 4.1 1.5 3.8 1.5 7 1.5 4.6 1.5 4.1 1.5 3.8 1.5 9.5 1.5 6.2 1.5 5.8 1.5 5 1.5 9.5 1.5 6.2 1.5 5.8 1.5 5 1.5 7.5 1.5 5 1.5 4.8 1.5 4.3 1.5 7.5 1.5 5 1.5 4.8 1.5 4.3 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT ns ns ns CY54FCT245T, CY74FCT245T 8-BIT TRANSCEIVERS WITH 3-STATE OUTPUTS SCCS018B – MAY 1994 – REVISED NOVEMBER 2001 PARAMETER MEASUREMENT INFORMATION 7V From Output Under Test From Output Under Test Test Point CL = 50 pF (see Note A) Open TEST GND CL = 50 pF (see Note A) 500 Ω S1 500 Ω S1 Open 7V Open tPLH/tPHL tPLZ/tPZL tPHZ/tPZH 500 Ω LOAD CIRCUIT FOR 3-STATE OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS 3V 1.5 V Timing Input 0V tw tsu 3V 1.5 V Input 1.5 V th 3V 1.5 V Data Input 1.5 V 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V 1.5 V Input 1.5 V 0V tPLH tPHL 1.5 V 1.5 V VOL tPHL Out-of-Phase Output tPLZ ≈3.5 V 1.5 V tPZH VOH 1.5 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 1.5 V 0V Output Waveform 1 (see Note B) tPLH 1.5 V 1.5 V tPZL VOH In-Phase Output 3V Output Control Output Waveform 2 (see Note B) VOL + 0.3 V VOL tPHZ 1.5 V VOH – 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 28-Feb-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) 5962-9221401M2A ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC 5962-9221401MRA ACTIVE CDIP J 20 1 None Call TI Level-NC-NC-NC 5962-9221403M2A ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC 5962-9221403MRA ACTIVE CDIP J 20 1 None Call TI Level-NC-NC-NC 5962-9221405M2A ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC 5962-9221405MRA ACTIVE CDIP J 20 1 None Call TI Level-NC-NC-NC CY54FCT245ATDMB ACTIVE CDIP J 20 1 None Call TI Level-NC-NC-NC CY54FCT245CTLMB ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC CY54FCT245TLMB ACTIVE LCCC FK 20 1 None Call TI Level-NC-NC-NC CY74FCT245ATPC ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC CY74FCT245ATQCT ACTIVE SSOP/ QSOP DBQ 20 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245ATSOC ACTIVE SOIC DW 20 25 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245ATSOCT ACTIVE SOIC DW 20 2000 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245CTQCT ACTIVE SSOP/ QSOP DBQ 20 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245CTSOC ACTIVE SOIC DW 20 25 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245CTSOCT ACTIVE SOIC DW 20 2000 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245DTQCT ACTIVE SSOP/ QSOP DBQ 20 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245TQCT ACTIVE SSOP/ QSOP DBQ 20 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245TSOC ACTIVE SOIC DW 20 25 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM CY74FCT245TSOCT ACTIVE SOIC DW 20 2000 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 28-Feb-2005 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated