CABLE BREAKOUT BOOTS, TWO ENTRY Table of Dimensions, inch (mm): PART NUMBER (See Note*) D3-9FR D14-30FR D50-100FR D50-200FR D200-400FR Note*: Material: Body ID Exp. Rec’d. (A), Min (B), Max 0.80 (20) 0.37 (9) 1.20 (30) 0.60 (15) 1.90 (48) 0.90 (23) 2.50 (63) 0.90 (23) 3.00 (76) 1.50 (38) Leg ID Exp. (C), Min 0.33 (8) 0.50 (13) 0.75 (19) 0.75 (19) 1.45 (37) Rec’d. Length Min (E), Body (F), Leg 2.0 (51) 0.7 (18) 2.5 (64) 1.0 (25) 3.0 (76) 1.2 (30) 3.0 (76) 1.2 (30) 3.5 (89) 1.5 (38) Rec’d. (D), Max 0.11 (3) 0.17 (4) 0.30 (8) 0.30 (8) 0.50 (13) Rec’d. Wall Ref. (W) 0.05 (1.3) 0.07 (1.8) 0.10 (2.5) 0.10 (2.5) 0.12 (3.0) Add “NA” to the end of Part Number if no adhesive is required Heat shrinkable boot material in accordance with –3 polyolefin Factory applied sealant: Factory applied hot melt adhesive is standard. Product Brand: Raychem Products, North America Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Title: Specification Control Drawing CABLE BREAKOUT BOOT, TWO ENTRY Size A Cage Code Document No. 06090 Tyco Electronics reserves the right to amend this drawing UNLESS OTHERWISE SPECIFIED at any time. Users should evaluate the suitability of the DIMENSIONS ARE IN INCHES. product for their application. METRIC DIMENSIONS ARE SHOWN IN BRACKETS Drawn By: Org. Date: Original file: DXXX-XXXFR Rev.: Rev. Date: A March 10, 2003 File : A.Ng R030128.doc 03/10/2003 Print Date: 14-Mar-03 If this document is printed it becomes uncontrolled. Check for the latest revision. Scale: None Sheet: 1 of 1