D66 & DP66 Series 32 Pin DIP 6-Pole Filters 1.0 Hz to 100 kHz Fixed Frequency Description The D66 and DP66 Series of small 6-pole fixedfrequency, precision active filters provide high performance linear active filtering in a compact 32pin DIP package, with a broad range of corner frequencies and a choice of transfer functions. Individual D66 filters can serve in low-pass or highpass applications (DP66, low-pass only) or be combined to create custom band-pass or bandreject filters. These fully self-contained units require no external components or adjustments. Each model comes factory tuned to a user-specified corner frequency between 1 Hz and 100 kHz (DP66, 1 Hz to 5 kHz) and operate with low total harmonic distortion over a wide dynamic input voltage range from non-critical +/-5V to +/-18V power supplies. Features/Benefits: • Low harmonic distortion and wide signal-to-noise ratio to 16 bit resolution. • Compact 1.8"L x 0.8"W x 0.3"H minimizes board space requirements. • Plug-in ready-to-use, reducing engineering design and manufacturing cycle time. • Factory tuned, no external clocks or adjustments needed • Broad range of transfer characteristics and corner frequencies to meet a wide range of applications. Available D66L6B DP66L6B D66L6L DP66L6L Applications Low-Pass Models: ......................Page 6-pole Butterworth ....................................2 6-pole Butterworth (Low Power) ..............2 6-pole Bessel ............................................2 6-pole Bessel (Low Power) ......................2 Available High-Pass Models: .................................. D66H8B 6-pole Butterworth ....................................2 • Anti-alias filtering • Data acquisition systems General Specifications: ........................................ Pin-out/package data & ordering information ..........3 • Communication systems and electronics • Medical electronics equipment and research • Aerospace, navigation and sonar applications • Sound and vibration testing • Acoustic and vibration analysis and control • Noise elimination • Signal reconstruction 1 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com D66 & DP66 Series 6-Pole Low-Pass and High-Pass Filters Fixed Frequency Model D66L6B & DP66L6B D66L6L & DP66L6L Model Product Specifications Low-Pass Low-Pass Transfer Function 6-Pole, Butterworth 6-Pole, Bessel Transfer Function 6-Pole, Butterworth Size 1.8” x 0.8” x 0.3” 1.8” x 0.8” x 0.3” Size 1.8” x 0.8” x 0.3” Range fc D66 DP66 1 Hz to 100 kHz 1 Hz to 5 kHz 1 Hz to 100 kHz 1 Hz to 5 kHz Range fc D66 DP66 1 Hz to 100 kHz Not Available Theoretical Transfer Characteristics Appendix A Page 8 Appendix A Page 3 Theoretical Transfer Characteristics Appendix A Page 28 Passband Ripple 0.0 dB 0.0 dB Passband Ripple 0.0 dB High-pass (theoretical) DC Voltage Gain (non-inverting) Stopband Attenuation Rate (theoretical) 0 ± 0.1 dB max. 0 ± 0.05 dB typ. 0 ± 0.1 dB max. 0 ± 0.05 dB typ. Voltage Gain 36 dB/octave 36 dB/octave Stopband Attenuation Rate 36 dB min. Power Bandwidth (-6dB) 1 MHz Power Bandwidth 120 kHz ± 1% max. Cutoff Frequency Stability Amplitude Phase fc ± 0.01% /°C -3dB -270° 0.80 fc 1.00 fc 5.41 fc 7.99 fc Filter Attenuation 80.0 dB 60.0 dB 3.01 dB 0.00 dB Cutoff Frequency Stability Amplitude Phase fc ± 0.01% /°C -3dB -270° Filter Attenuation 0.29 dB 3.01 dB 60.0 dB 80.0 dB (theoretical) Phase Match1 0 - 0.8 fc (theoretical) ± 1% max. 0.80 fc 1.00 fc 3.16 fc 4.64 fc fc ± 0.01% /°C -3dB -155° 1.89 dB 3.01 dB 60.0 dB 80.0 dB 0 - fc ± 2° max. ± 1° typ. ± 0.2 dB max. ± 0.1 dB typ. 0.8 fc - 1.0 fc ± 0.3° dB max. ± 0.15° dB typ. 0 - fc ± 0.2 dB max. ± 0.1 dB typ. 0 - 0.8 fc Total Harmonic Distortion @ 1 kHz D66 DP66 <-100 dB typ. <-80 dB typ. <-100 dB typ. <-80 dB typ. Wide Band Noise 200 mVrms typ. (5 Hz - 2 MHz) Narrow Band Noise (20 Hz - 100 kHz) Filter Mounting Assembly (non-inverting) ± 2° max. ± 1° typ. ± 3° max. ± 1.5° typ. 0.8 fc - 1.0 fc Amplitude Accuracy D66H6B (theoretical) 0 ± 0.1 dB to 100 kHz 0 ± 0.05 dB to 120 kHz Phase Match1 fc - 100 kHz Amplitude Accuracy 1.0 - 1.25 fc (theoretical) ± 1% max. .21 fc .32 fc 1.00 fc 2.5 fc ± 3° max. ± 1.5° typ. ± 0.3 dB max. ± 0.15 dB typ. 1.25fc-100kHz ± 0.2 dB max. ± 0.1 dB typ. Total Harmonic Distortion @ 1 kHz D66 <-88 dB typ. 200 mVrms typ. Wide Band Noise 400 mVrms typ. 50 mVrms typ. 50 mVrms typ. Narrow Band Noise FMA-01A FMA-01A Filter Mounting Assembly (5 Hz - 2 MHz) (20 Hz - 100 kHz) 100 mVrms typ. FMA-01A 1. Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot. 2 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com D66 & DP66 Series Pin-Out and Package Data Ordering Information Specification (25°C and Vs ± 15 Vdc) 1 Analog Input Characteristics Impedance 10 kW min. Voltage Range ± 10 Vpeak Max. Safe Voltage ± Vs 0.80 Side View 0.025 dia. All dimensions are in inches All case dimensions ± 0.01" 1.80 Analog Output Characteristics Impedance(Closed Loop) 1 W typ. 10 W max. Linear Operating Range ± 10 V 2 Maximum Current ± 2 mA 3 Offset Voltage 2 mV typ. 20 mV max. Offset Temp. Coeff. 50 mV / °C Front View 0.30 0.15 (min) 0.80 0.70 OUT -VS OS4 +VS Bottom View GND IN 1.80 1.55 1.65 0.00 ± 15 Vdc ± 5 to ± 18 Vdc ± 18 Vdc 0.45 0.55 0.10 0.00 0.15 Power Supply (±V) Rated Voltage Operating Range Maximum Safe Voltage Quiescent Current D66 Filter Mounting Assembly-See FMA-01A ± 19 mA typ. ± 30 mA max. Quiescent Current DP66 Ordering Information ± 7.0 mA typ. ± 8.0 mA max. Temperature Operating Storage - 0 to + 70 °C - 25 to + 85 °C Filter Type Transfer Function L - Low Pass H - High Pass B - Butterworth L - Bessel DC Offset Adjustment D66L6B-849 Hz ± Vs Do not connect if trim is not required. 20 k W (Cermet) Power Level D – Standard Power DP – Low Power OS Notes: 5 - 3 dB Corner Frequency e.g., 849 Hz 2.50 kHz 33.3 kHz 1. Input and output signal voltage referenced to supply common. 2. Output is short circuit protected to common. DO NOT CONNECT TO ±Vs. 3. Adjustable to zero. - Vs 4. Units operate with or with out offset pin connected. 5. How to Specify Corner Frequency: Corner frequencies are specified by attaching a three digit frequency designator to the basic model number. Corner frequencies can range from 1.00 Hz to 100 kHz. We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright. IN-00D66-00 3 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com Low-Pass 6-Pole Appendix A Bessel Theoretical Transfer Characteristics 1 f/fc Amp Phase Delay (Hz) (dB) (deg) (sec) 0.00 0.00 0.00 .430 0.10 -0.029 -15.5 .430 0.20 -0.116 -31.0 .430 0.30 -0.261 -46.5 .430 0.40 -0.465 -62.0 .430 0.50 -0.728 -77.4 .430 0.60 -1.05 -92.9 .430 0.70 -1.44 -108 .430 0.80 -1.89 -124 .430 0.85 -2.15 -132 .430 0.90 -2.42 -139 .430 0.95 -2.70 -147 .430 1.00 -3.01 -155 .430 1.10 -3.68 -170 .429 1.20 -4.44 -186 .428 1.30 -5.29 -201 .426 1.40 -6.23 -216 .422 1.50 -7.29 -232 .416 1.60 -8.46 -246 .401 1.70 -9.74 -261 .393 1.80 -11.1 -275 .376 1.90 -12.6 -287 .357 2.00 -14.2 -300 .335 2.25 -18.3 -328 .279 2.50 -22.6 -351 .228 2.75 -26.7 -369 187 3.00 -30.7 -385 .156 3.25 -34.5 -398 .131 3.50 -38.1 -408 .111 4.00 -44.7 -426 .083 5.00 -55.9 -449 .052 6.00 -65.2 -465 .036 7.00 -73.2 -476 .026 8.00 -80.1 -484 .020 9.00 -86.2 -490 .015 10.0 -91.6 -495 .013 Frequency Response Amp (dB) 0 -40 -60 -80 -100 0.1 2 3 4 56781.0 2 3 4 567 10.0 Normalized Frequency(f/fc) Delay (Normalized) Delay (sec) 1.0 0.5 0.0 3 4 5 6 7 8 91.0 1.5 0.1 0.15 2 Normalized Time (1/f sec) Step Response (V/V) Step Response 1.Normalized Group Delay: The above delay data is normalized to a corner frequency of 1.0Hz.The actual delay is the normalized delay divided by the actual corner frequency (fc). Actual Delay = -20 1.2 1.0 0.8 0.6 0.4 0.2 -0.0 -0.2 0 1 2 3 4 Normalized Time (1/f sec) Normalized Delay Actual Corner Frequency (fc) in Hz 3 25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839 e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178 5 Low-Pass 6-Pole Appendix A Butterworth Theoretical Transfer Characteristics 1 f/fc Amp Phase Delay (Hz) (dB) (deg) (sec) 0.00 0.00 0.00 .615 0.10 0.00 -22.2 .617 0.20 0.00 -44.5 .624 0.30 0.00 -67.2 .637 0.40 0.00 -90.4 .656 0.50 -0.001 -115 .685 0.60 -0.009 -140 .731 0.70 -0.060 -167 .803 0.80 -0.289 -198 .911 0.85 -0.578 -215 .970 0.90 -1.080 -233 1.02 0.95 -1.88 -252 1.03 1.00 -3.01 -270 1.00 1.10 -6.17 -304 .845 1.20 -9.96 -331 .660 1.30 -13.9 -352 .518 1.40 -17.6 -368 .417 1.50 -21.2 -382 .345 1.60 -24.5 -393 .291 1.70 -27.7 -403 .251 1.80 -30.6 -412 .219 1.90 -33.5 -419 .193 2.00 -36.1 -425 .171 2.25 -42.3 -439 .132 2.50 -47.8 -450 .105 2.75 -52.7 -458 .086 3.00 -57.3 -465 .071 3.25 -61.4 -471 .060 3.50 -65.3 -476 .052 4.00 -72.2 -484 .039 5.00 -83.9 -496 .025 6.00 -503 .017 -93.4 7.00 -508 .012 -101 8.00 -512 .0097 -108 9.00 -515 .0076 -115 10.0 -518 .0062 -120 Frequency Response Amp (dB) 0 -40 -60 -80 -100 0.1 2 3 4 5 6 78 1.0 2 3 4 5 6 7 10.0 Normalized Frequency(f/fc) Delay (Normalized) Delay (sec) 2.0 1.0 0.0 0.1 0.15 2 3 4 5 6 7 89 1.0 1.5 Normalized Time (1/f sec) Step Response (V/V) Step Response 1.Normalized Group Delay: The above delay data is normalized to a corner frequency of 1.0Hz.The actual delay is the normalized delay divided by the actual corner frequency (fc). Actual Delay = -20 1.2 1.0 0.8 0.6 0.4 0.2 -0.0 0 1 2 3 4 Normalized Time (1/f sec) Normalized Delay Actual Corner Frequency (fc) in Hz 8 25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839 e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178 5 High-Pass 6-Pole Appendix A Butterworth Theoretical Transfer Characteristics 1 f/fc Amp Phase Delay (Hz) (dB) (deg) (sec) 0.10 -120 518 0.617 -83.9 0.20 496 0.624 -62.7 0.30 473 0.637 -47.8 0.40 450 0.656 -36.1 0.50 425 0.685 0.60 -26.6 400 0.731 0.70 -18.6 373 0.803 0.80 -11.9 342 0.911 0.85 -9.05 325 0.970 307 0.90 -6.57 1.017 0.95 -4.55 288 1.033 1.00 -3.01 270 1.005 0.660 1.20 -0.46 209 0.417 1.40 -0.08 172 0.291 1.60 -0.02 147 1.80 -0.00 128 0.219 2.00 -0.00 115 0.171 90.4 2.50 -0.00 0.105 -0.00 74.8 3.00 0.071 0.00 55.8 4.00 0.039 5.00 0.00 44.5 0.025 6.00 0.00 37.0 0.017 7.00 0.00 31.7 0.013 0.00 8.00 27.7 0.010 0.00 9.00 24.6 0.008 10.0 0.00 22.2 0.006 Frequency Response Amp (dB) 0 -20 -40 -60 -80 -100 0.1 2 3 4 5 6 78 1.0 2 3 4 5 6 7 10.0 Normalized Frequency(f/fc) 1.Normalized Group Delay: The above delay data is normalized to a corner frequency of 1.0Hz.The actual delay is the normalized delay divided by the actual corner frequency (fc). Actual Delay = Normalized Delay Actual Corner Frequency (fc) in Hz 28 25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839 e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178