Vishay D682K53Y5PL6.J7 D sery Datasheet

D Series
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1 and 2, 500 VDC, General Purpose
D
FEATURES
D
• Low losses
• High stability
Tangent
line
• High capacitance in small size
Tangent
line
SH
SH
• Kinked (preferred) or straight leads
• Compliant to RoHS directive 2002/95/EC
APPLICATIONS
• Bypassing
F
• Coupling
F
Capacitors with 5 mm (0.20") and 7.5 mm (0.30") lead spacing
DESIGN
QUICK REFERENCE DATA
DESCRIPTION
CLASS 1
(C0G (NP0),
SL0)
CLASS 2
(YP5, Z5U, Y5V, X5F)
Voltage (VDC)
500
Min. Capacitance (pF)
10
Max. Capacitance (pF)
82
Mounting
• Resonant circuit
100
22 000
Through hole
The capacitors consist of a ceramic disc both sides of which
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.6 mm.
The capacitors have inward kinked leads with a spacing of
5 mm (0.200") or 7.5 mm (0.300") and a lead length from
4 mm to 30 mm. Encapsulation is made of phenolic resin.
CAPACITANCE RANGE
Class 1, at 1 MHz, 1.2 VRMS; 10 pF to 82 pF
MARKING
Marking indicates capacitance value and tolerance in
accordance with “EIA 198”.
The capacitors meet the essential requirements of
“EIA 198”. Unless stated otherwise all electrical values apply
at an ambient temperature of 25 °C ± 3 °C, at normal
atmospheric conditions.
Class 2, at 1 kHz, 1 ± 0.2 VRMS; 100 pF to 22 000 pF
1 kHz, 1 VRMS ± 0.2 VRMS for capacitance values higher than
1000 pF
RATED DC VOLTAGE
500 V
OPERATING TEMPERATURE RANGE
DIELECTRIC STRENGTH
Class 1, - 55 °C to + 125 °C
250 % of rated voltage
Class 2, - 55 °C to + 85 °C
INSULATION RESISTANCE AT 500 VDC
TEMPERATURE COEFFICIENTS
≥ 10 000 MΩ
Class 1, C0G (NP0); SL0
TOLERANCE ON CAPACITANCE
Class 2, Y5P; Z5U; Y5V; X5F
± 5 %; ± 10 %; ± 20 %; + 80/- 20 %
SECTIONAL SPECIFICATIONS
DISSIPATION FACTOR
Class 1, IEC 60 384-8
Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10-4 maximum
Class 2, IEC 60 384-9
Class 1, C > 30 pF; ≤ 0.2 %
EIA 198
Class 2, ≤ 3.0 %
CLIMATIC CATEGORY
Class 1, 55/125/21
Class 2, 10/85/21, 30/85/21 and 55/85/21
www.vishay.com
40
For technical questions, contact: [email protected]
Document Number: 28513
Revision: 07-Jan-10
D Series
Ceramic Disc Capacitors
Class 1 and 2, 500 VDC, General Purpose
Vishay BCcomponents
ORDERING INFORMATION (PREFERED TYPES), CLASS 1, 500 VDC, KINKED
CLEAR TEXT CODE
C
(pF)
TOL.
(%)
CLASS 1 NP0
10
12
15
18
22
27
CLASS 1 SL0
33
39
47
56
68
82
DMAX.
(mm)
LEAD SPACING
(mm)
(1)
SH
(mm)
4.0
D100J20C0GL6.J5.
D120J20C0GL6.J5.
D150J20C0GL6.J5.
D180J25C0GL6.J5.
D220J25C0GL6.J5.
D270J25C0GL6.J5.
4.0
D330J20SL0L6.J5.
D390J20SL0L6.J5.
D470J20SL0L6.J5.
D560J20SL0L6.J5.
D680J25SL0L6.J5.
D820J25SL0L6.J5.
5.0
±5
5.0
6.5
5.0
±5
5.0
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
16TH DIGIT:
R = RoHS COMPLIANT
6.5
Notes
(1) SH = seated height
• Maximum thickness 4.0 mm
• Lead style codes refer to inward kinked leads. Other styles available on request
ORDERING INFORMATION (PREFERED TYPES), CLASS 2, 500 VDC, KINKED
CLEAR TEXT CODE
C
(pF)
CLASS 2 Y5P
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10 000
CLASS 2 Y5V
1000
1500
2200
3300
4700
6800
10 000
15 000
22 000
TOL.
(%)
DMAX.
(mm)
LEAD SPACING
(mm)
(1)
SH
(mm)
4.0
D101K20Y5PL6.J5.
D151K20Y5PL6.J5.
D221K20Y5PL6.J5.
D331K20Y5PL6.J5.
D471K20Y5PL6.J5.
D681K25Y5PL6.J5.
D102K25Y5PL6.J5.
D152K29Y5PL6.J5.
D222K33Y5PL6.J5.
D332K39Y5PL6.J5.
D472K43Y5PL6.J5.
D682K53Y5PL6.J7
D103K69Y5PL6.J7.
4.0
D102Z20Y5VL6.J5.
D152Z20Y5VL6.J5.
D222Z25Y5VL6.J5.
D322Z25Y5VL6.J5.
D472Z29Y5VL6.J5.
D682Z33Y5VL6.J5.
D103Z39Y5VL6.J5.
D153Z43Y5VL6.J5.
D223Z53Y5VL6.J7.
5
± 10
6.5
7.5
8.5
10
11
13.5
17.5
5
7.5
5
6.5
+ 80/- 20
Document Number: 28513
Revision: 07-Jan-10
7.5
8.5
10.0
11.0
13.5
5
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
16TH DIGIT:
R = RoHS COMPLIANT
7.5
For technical questions, contact: [email protected]
www.vishay.com
41
D Series
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1 and 2, 500 VDC, General Purpose
ORDERING INFORMATION (PREFERED TYPES), CLASS 2, 500 VDC, KINKED
CLEAR TEXT CODE
C
(pF)
TOL.
(%)
DMAX.
(mm)
LEAD SPACING
(mm)
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
16TH DIGIT:
R = RoHS COMPLIANT
SH (1)
(mm)
CLASS 2 Z5U
1000
D102M20Z5UL6.J5.
1500
D152M25Z5UL6.J5.
5.0
2200
D222M25Z5UL6.J5.
3300
4700
7.5
± 20
D332M29Z5UL6.J5.
5.0
8.5
D472M33Z5UL6.J5.
4.0
6800
10.0
D682M39Z5UL6.J5.
10 000
11.0
D103M43Z5UL6.J5.
15 000
13.5
D153M53Z5UL6.J7.
22 000
15.0
7.5
D223M59Z5UL6.J7.
CLASS 2 X5F
1 00
D101K20X5FL6.J5.R.
2 20
5.0
D221K20X5FL6.J5.R.
330
D331K20X5FL6.J5.R.
470
680
± 10
6.5
5.0
D471K25X5FL6.J5.R.
4.0
D681K25X5FL6.J5.R.
1000
7.5
D102K29X5FL6.J5.R.
2200
10.0
D222K39X5FL6.J5.R.
3300
12.0
4700
13.5
D332K47X5FL6.J7R.
7.5
4.8
D472K53X5FL6.J7R.
Note
(1) SH = seated height
• Maximum thickness 4.0 mm
• Lead style codes refer to inward kinked leads. Other styles available on request
PACKAGING
DMAX.
(mm)
SIZE CODE
5.0 (0.20")
20
6.5 (0.25")
25
7.5 (0.29")
29
8.5 (0.33")
33
10.0 (0.39")
39
11.0 (0.43")
43
12.0 (0.47")
47
13.5 (0.53")
53
15.0 (0.59")
59
17.5 (0.69")
69
PACKAGING QUANTITIES
BULK
REEL
AMMO
1000
2000
2000
500
-
-
Note
• The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack.
www.vishay.com
42
For technical questions, contact: [email protected]
Document Number: 28513
Revision: 07-Jan-10
D Series
Ceramic Disc Capacitors
Class 1 and 2, 500 VDC, General Purpose
P2
D
Vishay BCcomponents
Δh
P
ΔP
Δh
ΔP
H1
W2
H0
W1
W0 W
A
e
P1
Ød
Direction of unreeling
F
P0
D0
t1
detail A
Kinked capacitors on tape, lead spacing 5.0 mm (0.2")
DIMENSIONS OF TAPE
SYMBOL
PARAMETER
D
Body diameter
d
DIMENSIONS (mm)
NOMINAL
TOLERANCE
11.0 maximum
-
Lead diameter
0.6
± 0.05
P (1)
Pitch between capacitors
12.7
± 1.0
P0
Feed-hole pitch
12.7
± 0.3
ΔP
Plane deviation
1.0 maximum
-
P1 (2)
Feed-hole center to lead center
3.85
± 0.7
P2 (2)
Feed-hole center to component center
6.35
± 1.3
F
Lead spacing
5.0
0.6
- 0.4
Δh
Component alignment
0
± 1.0
W
Tape width
18.0
1.0
- 0.5
W0
Hold-down tape width
5.0 minimum
-
W1
Hole position
9.0
0.75
- 0.5
W2
Hold-down tape margin
3.0 maximum
± 0.5
H0
Height to seating plane
16.0
H1
Maximum component height
32.0
-
e
Lead end protrusion
1.0 maximum
-
L
Maximum length of snipped lead
11.0
-
D0
Feed-hole diameter
4.0
± 0.2
t
Total tape thickness
0.9 maximum
-
t1
Maximum thickness of tape and wires
1.5 maximum
-
Notes
(1) Cumulative pitch error: ± ≤ 1 mm/20 pitches
(2) Obliquity maximum 3°
Document Number: 28513
Revision: 07-Jan-10
For technical questions, contact: [email protected]
www.vishay.com
43
D Series
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1 and 2, 500 VDC, General Purpose
REEL AND TAPE DATA in millimeters
51 max.
355.6 ± 2.0
28 ± 1.5
8.0
45 max.
Reel with capacitors on tape
290
335
50
Ammopack with capacitors on tape
www.vishay.com
44
For technical questions, contact: [email protected]
Document Number: 28513
Revision: 07-Jan-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages