ITT DBMY25SOL3NM D subminiature connector Datasheet

D Subminiature
Connectors
D Subminiature
The ITT Cannon
D Subminiature family of
connectors has grown to
include a wide variety of styles,
options and accessories and is
often the most economical
Contents
Contents
Page
General Application D Subminiature Connectors
ɀ Straight PCB Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
D*NG Pressfit Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D*M Solder Termination (Machined) — Standard PC Tails . . . . . . . . . . . . . . . . . . . . . . . 6
ZD* Solder Termination (Stamped). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
D* Solder Termination (Machined) — European PC Tails . . . . . . . . . . . . . . . . . . . . . . . 10
D* Wrap Post Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
solution to any interconnect
problem. Ideally suited for
ɀ 90° PCB Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
D*M Solder Termination (Machined) — Standard Footprint .318ɍ or .283ɍɍ inch . . . 16
ZED* Solder Termination (Stamped) — Standard Footprint .318 inch . . . . . . . . . . . . . . 18
D* Solder Termination (Machined) — European Footprint 10,2ɍ or 9,4ɍɍ mm. . . . . . 20
ZD* Solder Termination (Stamped) — European Footprint 10,2 mm . . . . . . . . . . . . . . . 28
both commercial/industrial
applications and military/
aerospace applications,
ɀ Cable Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
D Solder Cup Solder Termination (Machined) with Tin Shells . . . . . . . . . . . . . . . . . . . . 32
ZD* Solder Cup Solder Termination (Stamped) with Tin Shells . . . . . . . . . . . . . . . . . . . 34
D*A Crimp Connectors without Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
D*W Discrete Wire IDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ITT Cannon D Subminiature
connectors have found
worldwide acceptance in a
multitude of applications
ranging from office equipment
to satellites.
Special Application D Subminiature Connectors
ɀ Combo D Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Combo D PCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option) . . . . . . . . 44
Combo D PCB Connectors with High Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Combo D PCB Connectors with (Size 20) Signal Contacts Only. . . . . . . . . . . . . . . . . . 74
Combo D Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Combo D Cable Crimp Connectors and Shield Cans . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Loose Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
ɀ Commercial Micro D Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
MDSM Connectors and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
ɀ Filter D Selection Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
D*JK PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
D*JT Solder Cup and Combo High Power Connectors. . . . . . . . . . . . . . . . . . . . . . . . . 122
High Reliability D Subminiature Connectors
ɀ Military/High Reliability Selection Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
PCB 90°, Straight, Wrap Post, and Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . 132
MIL-C-24308 Cross References and Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Military/High Reliability Combo D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
ɀ Space/High Reliability Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
PCB Straight, 90° and Cable Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Cable Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
High Density Cable Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Space/High Reliability Combo D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Space Accessories and Loose (Size 8) Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
NASA/GSFC & ESA-SCC Cross References. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Accessories Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Locking Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
On the Cover ្
Filter D, Combo D,
Commercial Micro D
(MDSM), Pressfit D,
and Standard D
Reader’s Resource Selection Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Dimensional Reference Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Lease Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Obsolete Products/Available Products Not Previously Listed . . . . . . . . . . . . . . . . . . . . 282
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Product Safety and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Combo D is a registered trademark of ITT Cannon in the United States.
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
1
D Subminiature
Straight PCB Selection Guide
D*NG - Straight Pressfit Termination
See pages 4-5.
The D*NG is based upon the specification
CECC75-301-802. These connectors provide a
low-cost alternative to traditional through hole
solder contacts. Utilizing stamped ‘‘Eye of the
Needle’’ compliant contact tails per IEC-352-5, the
parts are quickly and easily mounted onto PCBs
without soldering, crimping or specialized tooling.
The socket contact engaging area utilizes a
‘‘spoon’’ shape with four points of
interconnection. Hardware options provide
flexibility and ensure that the final product fits the
electrical requirements of any application.
Product Features
ɀ Quick and easy press-in installation without
specialized tooling
ɀ ‘‘Spoon’’ socket contact provides improved
interface compared to ‘‘Tuning Fork’’
ɀ Closed-entry socket for secure blind mating
ɀ Front-shell only design based on
CECC 75-301-802
ɀ ‘‘Eye of the Needle’’ compliant contact tails
ɀ Press-in bolt for ground continuity
ɀ #4-40 UNC and M3 hardware options
D*M Straight Solder Termination (Machined) — Standard PC Tails
D*M straight PCB connectors, equivalent to
MIL-C-24308 qualified versions (except for
finishes) for printed circuit boards and backplanes
in demanding applications. Additional contact
lengths, hardware and finish options available;
consult factory for details.
See pages 6-7.
Product Features
ɀ
ɀ
ɀ
ɀ
7.5 A current capacity
Machined contacts
2 contact finishes
Optional vertical standoffs, screw locks, and
boardlocks (4 prongs)
ɀ UL file number E8572
ɀ Dimensionally compatible with Combo D
ZD* - Straight Solder Termination (Stamped)
ZD* straight connectors are available for
applications where price is the primary driver. They
are available with or without boardlocks and screw
locks.
Product Features
ɀ Stamped contacts with 5 A current capacity
ɀ Economical
ɀ Optional vertical standoffs with optional
harpoon style boardlocks or screw locks
See pages 8-9.
D* - Straight Solder Termination (Machined) — European PC Tails
D* straight connectors are available for high
performance uses according to DIN 41652.
Available with European length OL contacts.
Select contact finish from 2 performance classes.
See pages 10-11.
Product Features
ɀ High performance commercial connectors
ɀ Two contact finish performance classes
ɀ Optional vertical standoffs, threaded inserts
and pushfits/boardlocks
ɀ OL2 contact length, other lengths available
ɀ Tin plated contact PC tails (pin & socket)
ɀ Machined contacts
D* - Wrap Post Termination
D* straight connectors are available for high
performance uses according to DIN 41652.
Contacts available in two popular lengths.
Product Features
ɀ High performance commercial class
connectors
ɀ Two contact lengths for 2 or 3 wraps
ɀ Machined contacts
See pages 12-13.
2
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Specifications
Current Rating
Temperature Rating
Contact Resistance
Test Voltage
X Plated Through Hole
PC Tail Press-in Force
PC Tail Push-out Force
PC Board Thickness
Materials and Finishes
5 A / 25°C, 3.5 A / 70°C ambient
−55°C to 125°C
10 mȉ
1200 Vrms at Sea Level
1,09 - 0,94 (.043 - .037)
100N/contact max.
30N/contact min.
3,20 - 1,60 (.125 - .062)
Specifications
Temperature Rating
Current Rating
Contact Resistance
Dielectric Withstanding
Voltage
−55°C to 125°C
7.5 A
55 millivolt max at 7.5 A test current
1000 VAC at Sea Level
−55°C to 105°C
5A
15 mȉ
1000 VAC at Sea Level
Hardware
Steel/Copper Alloy
Finish
Tin
None (color: black)
Gold over Nickel (Standard)
or Gold over PdNi (-408)
Tin/Zinc
Description
Shell
Insulator
Contact
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Hardware
Steel/Copper Alloy
Finish
Tin
None (color: dark green)
Gold over Nickel. Terminating
end Tin (Socket only)
Tin/Zinc
Description
Shell
Insulator
Contacts
Hardware
Material
Steel
Thermoplastic, UL 94-0
Copper Alloy
Steel/Copper Alloy
Finish
Tin
None (color: black)
Gold over Nickel
Tin/Zinc
Materials and Finishes
−55°C to 125°C
5A
10 mȉ
1250 VAC at Sea Level
Specifications
Temperature Rating
Current Rating
Contact Resistance
Dielectric Withstanding
Voltage
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Materials and Finishes
Specifications
Temperature Rating
Current Rating
Contact Resistance
Dielectric Withstanding
Voltage
Description
Shell
Insulator
Contact
Materials and Finishes
Specifications
Temperature Rating
Current Rating
Contact Resistance
Dielectric Withstanding
Voltage
Straight PCB Selection Guide
Description
Shell
Insulator
Contacts
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Hardware
Steel/Copper Alloy
Finish
Tin
None (color: dark green)
Gold over Nickel in mating area,
Tin on balance
Tin/Zinc
Materials and Finishes
−55°C to 125°C
5A
10 mȉ
1250 VAC at Sea Level
Description
Shell
Insulator
Contact
Material
Steel
Thermoplastic, UL 94V-0
Socket: Copper Alloy
Hardware
Steel/Copper Alloy
Finish
Tin
None (color: dark green)
Gold over Nickel. Terminating
end Tin (Socket)
Tin/Zinc
Dimensions are shown in mm (inch)
Dimensions subject to change
3
D Subminiature
D*NG
Straight Pressfit Termination
Plug
Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Through
Hole
DENG9P-P1
DANG15P-P1
DBNG25P-P1
DCNG37P-P1
DDNG50P-P1
Clinch Nut
# 4-40 UNC
DENGE9P-P1
DANGE15P-P1
DBNGE25P-P1
DCNGE37P-P1
DDNGE50P-P1
Clinch Nut
M3
DENGX9P-P1
DANGX15P-P1
DBNGX25P-P1
DCNGX37P-P1
DDNGX50P-P1
Press-In Bolt
# 4-40 UNC
DENGZ9P-P1
DANGZ15P-P1
DBNGZ25P-P1
DCNGZ37P-P1
DDNGZ50P-P1
Press-In Bolt
M3
DENGL9P-P1
DANGL15P-P1
DBNGL25P-P1
DCNGL37P-P1
DDNGL50P-P1
Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9P-P1-408.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
Engaging Face
DD Configuration
A
C
2,84 (.112)
B
10°
1
2
3
4
5
6
7
5,69
(.224)
8
E
D
9
10 11 12 13 14
15
5,70 ± 0,20
(.224 ± .008)
2,15 (.085)
MAX
5,60 (.220)
MAX
2,84 (.112)
2,15 (.085)
MAX
6,00 - 0,25
(.236 - .010)
Dimensions
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
Shell Size
DE
DA
DB
DC
DD
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
Mounting Types
Through Hole
4
Clinch Nut
Press-In Bolt
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*NG
Straight Pressfit Termination
Receptacle
Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Through
Hole
DENG9S-P1
DANG15S-P1
DBNG25S-P1
DCNG37S-P1
DDNG50S-P1
Clinch Nut
# 4-40 UNC
DENGE9S-P1
DANGE15S-P1
DBNGE25S-P1
DCNGE37S-P1
DDNGE50S-P1
Clinch Nut
M3
DENGX9S-P1
DANGX15S-P1
DBNGX25S-P1
DCNGX37S-P1
DDNGX50S-P1
Press-In Bolt
# 4-40 UNC
DENGZ9S-P1
DANGZ15S-P1
DBNGZ25S-P1
DCNGZ37S-P1
DDNGZ50S-P1
Press-In Bolt
M3
DENGL9S-P1
DANGL15S-P1
DBNGL25S-P1
DCNGL37S-P1
DDNGL50S-P1
Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9S-P1-408.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
Engaging Face
DD Configuration
A
5,69
(.224)
C
2,84 (.112)
B
10°
E
D
2,15 (.085)
MAX
5,70 ± 0,20
(.224 ± .008)
5,60 (.220)
MAX
2,84 (.112)
2,15 (.085)
MAX
6,00 - 0,25
(.236 - .010)
Dimensions
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
Shell Size
DE
DA
DB
DC
DD
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
Mounting Types
Through Hole
Clinch Nut
Press-In Bolt
Dimensions are shown in mm (inch)
Dimensions subject to change
5
D Subminiature
D*M
Straight Solder Termination (Machined) — Standard PC Tails
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Standoff
DEMV9PNK87
DAMV15PNK87
DBMV25PNK87
DCMV37PNK87
DDMV50PNK87
Standoff &
Boardlock
DEMZ9PNK87
DAMZ15PNK87
DBMZ25PNK87
DCMZ37PNK87
DDMZ50PNK87
Standoff, Boardlock &
Screw Lock
DEMN9PNK87
DAMN15PNK87
DBMN25PNK87
DCMN37PNK87
DDMN50PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN9PNK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
DD Configuration
Engaging Face
5,69
(.224)
A
2,84
(.112)
C
B
POSITION 1
E
D
L
Hardware removed for clarity
10°
Ø 0,76
(.030)
2,92
(.115)
2,84
(.112)
BOARDLOCK
4,52
(.178)
STANDOFF
# 4-40 UNC
7,62 ± 0,25
(.300 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
# 4-40 UNC
F
Hardware removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
DD
6
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*M
Straight Solder Termination (Machined) — Standard PC Tails
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Standoff &
Boardlock
DEMZ9SNA197
DAMZ15SNA197
DBMZ25SNA197
DCMZ37SNA197
DDMZ50SNA197
Standoff
DEMV9SNA197
DAMV15SNA197
DBMV25SNA197
DCMV37SNA197
DDMV50SNA197
Standoff, Boardlock &
Screw Lock
DEMN9SNA197
DAMN15SNA197
DBMN25SNA197
DCMN37SNA197
DDMN50SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN9SNK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
DD Configuration
Engaging Face
5,69
(.224)
A
2,84
(.112)
C
B
POSITION 1
E
D
L
10°
Hardware removed for clarity
Ø 0,76
(.030)
2,92
(.115)
BOARDLOCK
2,84
(.112)
4,52
(.178)
STANDOFF
# 4-40 UNC
7,62 ± 0,25
(.300 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
# 4-40 UNC
F
Hardware removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
7
D Subminiature
ZD*
Straight Solder Termination (Stamped)
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Standoff With
Boardlock
ZDEE9P-OL2-146
ZDAE15P-OL2-146
ZDBE25P-OL2-146
ZDCE37P-OL2-146
ZDDE50P-OL2-146
Through Hole
ZDE9P-OL2
ZDA15P-OL2
ZDB25P-OL2
ZDC37P-OL2
ZDD50P-OL2
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
POSITION 1
E
D
10°
0,64 (.025)
REF
2,84 (.112)
3,18 (.125)
MIN
4,32 (.170)
REF
6,00
(.236)
STANDOFF
# 4-40 UNC
W
F
1,00 (.040)
REF
Hardware removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
DD
8
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
ZD*
Straight Solder Termination (Stamped)
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Standoff With
Boardlock
ZDEE9S-OL2-146
ZDAE15S-OL2-146
ZDBE25S-OL2-146
ZDCE37S-OL2-146
ZDDE50S-OL2-146
Through Hole
ZDE9S-OL2
ZDA15S-OL2
ZDB25S-OL2
ZDC37S-OL2
ZDD50S-OL2
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
POSITION 1
E
D
10°
0,64 (.025)
REF
3,18 (.125)
MIN
2,84
(.112)
4,32 (.170)
REF
6,00
(.236)
F
STANDOFF
# 4-40 UNC
W
1,00 (.040)
REF
Hardware removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2,064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
Dimensions are shown in mm (inch)
Dimensions subject to change
9
D Subminiature
D*
Straight Solder Termination (Machined) — European PC Tails
Plug
Part Numbers
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Standoff #4-40 UNC
With Pushfit/Boardlock
DEE9P-0L2-K87-146
DAE15P-0L2-K87-146
DBE25P-0L2-K87-146
DCE37P-0L2-K87-146
DDE50P-0L2-K87-146
Through Hole
DE9P-0L2-K87
DA15P-0L2-K87
DB25P-0L2-K87
DC37P-0L2-K87
DD50P-0L2-K87
Standoff M3 With
Pushfit/Boardlock
DEX9P-0L2-K87-146
DAX15P-0L2-K87-146
DBX25P-0L2-K87-146
DCX37P-0L2-K87-146
DDX50P-0L2-K87-146
Note: For performance class 2 add -A191. Example DA15P-OL2-A191-K87.
PC Tail
Modifier
OL2
OL4
X
±0,30 (.012)
5,20 (.205)
6,75 (.266)
Y
±0,30 (.012)
10,20 (.401)
11,80 (.465)
Engaging Face
DD Configuration
A
5,69 (.224)
C
Ø 3,05 (.120)
2,84 (.112)
B
POSITION 1
D
E
L
10°
Ø 0,60 (.024)
X
2,84 (.112)
Y
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
10
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0.25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
Straight Solder Termination (Machined) — European PC Tails
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Layout
9
15
25
37
50
Through Hole
DE9S-0L2-A197
DA15S-0L2-A197
DB25S-0L2-A197
DC37S-0L2-A197
DD50S-0L2-A197
Standoff #4-40 UNC
With Pushfit/Boardlock
DEE9S-0L2-A197-146
DAE15S-0L2-A197-146
DBE25S-0L2-A197-146
DCE37S-0L2-A197-146
DDE50S-0L2-A197-146
Standoff M3 With
Pushfit/Boardlock
DEX9S-0L2-A197-146
DAX15S-0L2-A197-146
DBX25S-0L2-A197-146
DCX37S-0L2-A197-146
DDX50S-0L2-A197-146
Note: For performance class 2 add -A191. Example DA15S-0L2-A191-A197
PC Tail
Modifier
OL2
OL4
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
X
±0,30 (.012)
5,20 (.205)
6,75 (.266)
Y
±0,30 (.012)
10,20 (.401)
11,80 (.465)
Engaging Face
DD Configuration
A
5,69 (.224)
C
Ø 3,05
(.120)
B
POSITION 1
2,84 (.112)
D
E
L
10°
Ø 0,60 (.024)
X
2,84 (.112)
Y
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
11
D Subminiature
D*
Wrap Post Termination
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Modification
Code
F179
F179A
Layout
9
15
25
37
50
Number of
Wraps
2
3
X
max.
10,21 (.402)
13,61 (.536)
Through Hole
DE9P-F179A-K87
DA15P-F179A-K87
DB25P-F179A-K87
DC37P-F179A-K87
DD50P-F179A-K87
Y
±0,89 (.035)
15,20 (.598)
18,60 (.732)
Engaging Face
DD Configuration
5,69 (.224)
A
2,84 (.112)
C
Ø 3,05 (.120)
B
POSITION 1
D
E
L
10°
0,61 (.024)
REF
2,84 (.112)
X
Y
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
12
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,64 (.269)
6,64 (.269)
6,64 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
Wrap Post Termination
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9S-F179A-A197
DA15S-F179A-A197
DB25S-F179A-A197
DC37S-F179A-A197
DD50S-F179A-A197
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Modification
Code
F179
F179A
Number of
Wraps
2
3
X
max.
10,21 (.402)
13,61 (.536)
Y
±0,89 (.035)
15,20 (.598)
18,60 (.732)
DD Configuration
Engaging Face
5,69 (.224)
A
2,84 (.112)
C
Ø 3,05
(.120)
B
POSITION 1
D
E
L
10°
0,61 (.024)
REF
2.84 (.112)
X
Y
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,13 (.005)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
13
D Subminiature
90° PCB Selection Guide
D*M — 90° Solder Termination (Machined) — Standard Footprint .318ɍ or .283 inchɍɍ
D*M 90° PCB connectors, equivalent to
MIL-C-24308 qualified versions (except for
finishes), for use with printed circuit boards in
demanding applications. Additional contact
lengths, hardware and finish options available;
consult factory for details.
Product Features
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
7.5 A current capacity
Machined contacts
Two contact finishes
Metal bracket with threaded insert standard
Optional screw locks and boardlocks
UL file number E8572
Dimensionally compatible with Combo D
See pages 16-17.
ZED* — 90° Solder Termination (Stamped) — Standard Footprint .318 inchɍ
ZED* 90° connectors are available for applications
where price is the primary driver. They are
available with integrated plastic brackets with
Standard footprints.
Product Features
ɀ Stamped contacts with 5 A current capacity
ɀ Economical
ɀ Plastic bracket with integrated boardlocks and
grounding strap
ɀ Optional screw locks
See pages 18-19.
D* — 90° Solder Termination (Machined) — European Footprint 10,2ɍ or 9,4 mmɍɍ
D* 90° connectors are available for high
performance uses according to DIN 41652.
Available with European footprint 1AON contacts,
plastic and metal brackets, #4-40 or M3 threads
and stamped pushfits/boardlocks. Contact finish
available in 2 performance classes.
See pages 20-27.
Product Features
ɀ High performance commercial class
connectors
ɀ Two contact performance classes
ɀ Optional metal and plastic brackets, threaded
standoffs, clinch nuts, and stamped pushfits/
boardlocks
ɀ Tin plated contact PC tails (pin & socket)
ZD* — 90° Solder Termination (Stamped) — European Footprint 10,2 mmɍ
ZD* 90° connectors are available for applications
where price is the primary driver. They are
available with integrated plastic brackets with
European footprints.
Product Features
ɀ Stamped contacts with 5 A current capacity
ɀ Economical
ɀ Plastic bracket with integrated boardlocks and
grounding strap
ɀ Optional screw locks
See pages 28-29.
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
14
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Specifications
Temperature
Rating −55°C to 125°C
Current Rating 7.5 A
Contact
Resistance 55 millivolt max. at 7.5 A test
current
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
Description
Shell
Insulator
Pin Contact
Socket Contact
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Copper Alloy
Hardware (except Boardlocks)
Boardlocks
Steel
Copper Alloy
Finish
Tin
None (Color: dark green)
Gold over Nickel
Gold over Nickel in mating area,
Tin on balance
Tin
Tin
Materials and Finishes
Finish
Tin
None
Gold over Nickel in mating area,
Tin on balance
10 mȉ
Description
Shell
Insulator
Contacts
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
1250 VAC at Sea Level
Hardware
Boardlocks
Steel or Plastic
Copper Alloy
Finish
Tin
None (Color: dark green)
Gold over Nickel in mating area,
Tin on balance
Tin or None
Tin
15 mȉ
Description
Shell
Insulator
Contacts
1000 VAC at Sea Level
−55°C to +125°C
5A
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
Materials and Finishes
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
−55°C to 105°C
5A
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
90° PCB Selection Guide
−55°C to 105°C
5A
15 mȉ
Materials and Finishes
Materials and Finishes
Description
Shell
Insulator
Contacts
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel in mating area,
Tin on balance
1000 VAC at Sea Level
Dimensions are shown in mm (inch)
Dimensions subject to change
15
D Subminiature
D*M
90° Solder Termination (Machined) — Standard Footprint .318ɍ or .283 inchɍɍ
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Layout
9
15
25
37
50
Bracket &
Boardlock
DEMCP9PJK87
DAMC15PJK87
DBMC25PJK87
DCMC37PJK87
DDMC50PJK87
Bracket
DEMP9PJK87
DAMP15PJK87
DBMP25PJK87
DCMP37PJK87
DDMP50PJK87
Bracket,
Boardlock &
Screw Lock
#4-40 UNC
DEMG9PJK87
DAMG15PJK87
DBMG25PJK87
DCMG37PJK87
DDMG50PJK87
Bracket &
Screw Lock
#4-40 UNC
DEMD9PJK87
DAMD15PJK87
DBMD25PJK87
DCMD37PJK87
DDMD50PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DAMG15PJK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
DD Configuration
Engaging Face
2,84
(.112)
A
5,68
(.224)
C
B
E
D
7,18 ± 0,25
(.283 ± .010)
2,92
(.115)
10°
Ø 0,76
(.030)
L
BOARDLOCK
Screw lock and boardlock
removed for clarity
BRACKET,
METAL
M
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
RIVNUT
#4-40 UNC
N
7,18 ± 0,25
(.283 ± .010)
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
Screw lock and boardlock
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration. See Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016)
10,72 (.422) 6,693 (.2635)
—
10,72 (.422) 6,693 (.2635)
—
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
M
±0,25 (.010)
12,34 (.486)
12,34 (.486)
12,34 (.486)
12,34 (.486)
13,74 (.541)
N
±0,25 (.010)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,06 (.396)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
16
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*M
90° Solder Termination (Machined) — Standard Footprint .318ɍ or .283 inchɍɍ
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Layout
9
15
25
37
50
Bracket &
Boardlock
DEMC9SJA197
DAMC15SJA197
DBMC25SJA197
DCMC37SJA197
DDMC50SJA197
Bracket
DEMP9SJA197
DAMP15SJA197
DBMP25SJA197
DCMP37SJA197
DDMP50SJA197
Bracket,
Boardlock &
Screw Lock
#4-40 UNC
DEMG9SJA197
DAMG15SJA197
DBMG25SJA197
DCMG37SJA197
DDMG50SJA197
Bracket &
Screw Lock
#4-40 UNC
DEMD9SJA197
DAMD15SJA197
DBMD25SJA197
DCMD37SJA197
DDMD50SJA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DAMG15SJK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Engaging Face
DD Configuration
2,84
(.112)
A
4,33 ± 0,38
(.170 ± .015)
5,68
(.224)
C
B
D
E
7,18 ± 0,25
(.283 ± .010)
L
2,92
(.115)
10°
Ø 0,76
(.030)
Screw lock and boardlock
removed for clarity
BOARDLOCK
BRACKET,
METAL
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
RIVNUT
#4-40 UNC
M
N
7,18 ± 0,25
(.283 ± .010)
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
Screw lock and boardlock
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration. See Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
M
±0,25 (.010)
12,34 (.486)
12,34 (.486)
12,34 (.486)
12,34 (.486)
13,74 (.541)
N
±0,25 (.010)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,06 (.396)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
17
D Subminiature
ZED*
90° Solder Termination (Stamped) — Standard Footprint .318 inch
Plug
Part Numbers
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Shell Size
DE
DA
DB
DC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
ZEDEL9PBA
ZEDAL15PBA
ZEDBL25PBA
ZEDCL37PBA
Layout
9
15
25
37
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
ZEDE9PBA
ZEDA15PBA
ZEDB25PBA
ZEDC37PBA
Note: For contacts with 30 microinches of gold add -30. Example: ZEDEL9PBA-30
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
(.387 - .365)
Engaging Face
A
C
B
8,61 - 8,11
(.339 - .319)
18,45 - 17,69
(.726 - .696)
6,09 - 5,59
(.240 - .220)
12,93 - 12,17
(.509 - .479)
4,06 - 3,30
(.160 - .130)
10°
2,84 (.112)
2X GROUNDING HOOK
8,33 - 7,83
(.328 - .308)
Dimensions
Shell Size
DE
DA
DB
DC
18
A
±0,38 (.015)
30,89 (1.216)
39,09 (1.539)
53,09 (2.090)
69,40 (2.732)
B
±0,25 (.010)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,25 (.010)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
ZED*
90° Solder Termination (Stamped) — Standard Footprint .318 inch
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
ZEDEL9SBA
ZEDAL15SBA
ZEDBL25SBA
ZEDCL37SBA
Layout
9
15
25
37
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
ZEDE9SBA
ZEDA15SBA
ZEDB25SBA
ZEDC37SBA
Note: For contacts with 30 microinches gold add -30. Example: ZEDEL9SBA-30
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
( .385 - .365)
Engaging Face
A
C
8,15 - 7,65
(.321 - .301)
B
18,71 - 17,95
(.737 - .707)
6,35 - 5,85
(.250 - .230)
12,93 - 12,17
(.509 - .479)
4,06 - 3,30
(.160 - .130)
10°
2X GROUNDING HOOK
2,84 (.112)
8,33 - 7,83
(.328 - .308)
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,89 (1.216)
39,09 (1.539)
53,09 (2.090)
69,40 (2.732)
B
±0,25 (.010)
16,28 (.641)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,25 (.010)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
Dimensions are shown in mm (inch)
Dimensions subject to change
19
D Subminiature
D*
90° Solder Termination (Machined) — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9P-1AON-K87
DA15P-1AON-K87
DB25P-1AON-K87
DC37P-1AON-K87
DD50P-1AON-K87
Note: For performance class 2 add -A191. Example: DE9P-1A0N-A191-K87
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
A
2,54 (.100)
4,70 (.185)
C
5,08 (.200)
Ø 3,05 (.120)
B
D
E
L
9,40 (.370)
10°
Ø 0,60 (.024)
4,70 (.185)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
20
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
90° Solder Termination (Machined) — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9S-1AON-A197
DA15S-1AON-A197
DB25S-1AON-A197
DC37S-1AON-A197
DD50S-1AON-A197
Note: For performance class 2 add -A191. Example: DE9S-1AON-A191-A197
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
2,54 (.100)
A
C
4,70 (.185)
5,08 (.200)
Ø 3,05 (.120)
B
D
E
L
9,40 (.370)
10°
Ø 0,60 (.024)
4,70 (.185)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
21
D Subminiature
D*
90° Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍ or 9,4ɍɍ mm
Plug
Part Numbers
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Shell Size
DE
DA
DB
DC
DD
Bushing with
Through Hole
DE9P-1AFN-K87
DA15P-1AFN-K87
DB25P-1AFN-K87
DC37P-1AFN-K87
DD50P-1AFN-K87
Layout
9
15
25
37
50
Captive Nut
#4-40 UNC
DE9P-1A7N-K87
DA15P-1A7N-K87
DB25P-1A7N-K87
DC37P-1A7N-K87
DD50P-1A7N-K87
Captive Nut
M3
DE9P-1A9N-K87
DA15P-1A9N-K87
DB25P-1A9N-K87
DC37P-1A9N-K87
DD50P-1A9N-K87
Post
#4-40 UNC
DE9P-1A8N-K87
DA15P-1A8N-K87
DB25P-1A8N-K87
DC37P-1A8N-K87
DD50P-1A8N-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1AFN-K87-146
For performance class 2 add -A191. Example: DE9P-1AFN-A191-K87
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
DD Configuration
Engaging Face
2,54 (.100)
3,70 (.146)
5,08 (.200)
9,40 (.370)
L
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0.38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0.25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
22
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
90° Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍ or 9,4ɍɍ mm
Receptacle
Part Numbers
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Bushing with
Through Hole
DE9S-1AFN-A197
DA15S-1AFN-A197
DB25S-1AFN-A197
DC37S-1AFN-A197
DD50S-1AFN-A197
Captive Nut
#4-40 UNC
DE9S-1A7N-A197
DA15S-1A7N-A197
DB25S-1A7N-A197
DC37S-1A7N-A197
DD50S-1A7N-A197
Captive Nut
M3
DE9S-1A9N-A197
DA15S-1A9N-A197
DB25S-1A9N-A197
DC37S-1A9N-A197
DD50S-1A9N-A197
Post
#4-40 UNC
DE9S-1A8N-A197
DA15S-1A8N-A197
DB25S-1A8N-A197
DC37S-1A8N-A197
DD50S-1A8N-A197
Notes: For pushfit/boardlock option add -146. Example: DE9S-1AFN-A197-146
For performance class 2 add -A191. Example: DE9S-1AFN-A191-A197
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
2,54 (.100)
3,70 (.146)
5,08 (.200)
L
9,40 (.370)
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
23
D Subminiature
D*
90° Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9P-1ADN-K87
DA15P-1ADN-K87
DB25P-1ADN-K87
DC37P-1ADN-K87
DD50P-1ADN-K87
Captive Nut
#4-40 UNC
DE9P-1AWN-K87
DA15P-1AWN-K87
DB25P-1AWN-K87
DC37P-1AWN-K87
DD50P-1AWN-K87
Captive Nut
M3
DE9P-1AVN-K87
DA15P-1AVN-K87
DB25P-1AVN-K87
DC37P-1AVN-K87
DD50P-1AVN-K87
Post
#4-40 UNC
DE9P-1AJN-K87
DA15P-1AJN-K87
DB25P-1AJN-K87
DC37P-1AJN-K87
DD50P-1AJN-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1ADN-K87-146
For performance class 2 add -A191. Example: DE9P-1ADN-A191-K87
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
2,54 (.100)
A
3,70 (.146)
5,08 (.200)
C
B
E
D
L
9,40 (.370)
1,00 (.039)
10°
Ø 0,60 (.024)
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0.38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
24
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
90° Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9S-1ADN-A197
DA15S-1ADN-A197
DB25S-1ADN-A197
DC37S-1ADN-A197
DD50S-1ADN-A197
Captive Nut
#4-40 UNC
DE9S-1AWN-A197
DA15S-1AWN-A197
DB25S-1AWN-A197
DC37S-1AWN-A197
DD50S-1AWN-A197
Captive Nut
M3
DE9S-1AVN-A197
DA15S-1AVN-A197
DB25S-1AVN-A197
DC37S-1AVN-A197
DD50S-1AVN-A197
Post
#4-40 UNC
DE9S-1AJN-A197
DA15S-1AJN-A197
DB25S-1AJN-A197
DC37S-1AJN-A197
DD50S-1AJN-A197
Notes: For pushfit/boardlock option add -146. Example: DE9S-1ADN-A197-146
For performance class 2 add -A191. Example: DE9S-1ADN-A191-A197
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
2,54 (.100)
A
3,70 (.146)
5,08 (.200)
C
B
E
D
9,40 (.370)
L
1,00 (.039)
10°
Ø 0,60 (.024)
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
2,54 (.100)
3,70 (.146)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0.38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
25
D Subminiature
D*
90° Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9P-1A5N-K87
DA15P-1A5N-K87
DB25P-1A5N-K87
DC37P-1A5N-K87
DD50P-1A5N-K87
Captive Nut
#4-40 UNC
DE9P-1AUN-K87
DA15P-1AUN-K87
DB25P-1AUN-K87
DC37P-1AUN-K87
DD50P-1AUN-K87
Captive Nut
M3
DE9P-1ATN-K87
DA15P-1ATN-K87
DB25P-1ATN-K87
DC37P-1ATN-K87
DD50P-1ATN-K87
Post
#4-40 UNC
DE9P-1A6N-K87
DA15P-1A6N-K87
DB25P-1A6N-K87
DC37P-1A6N-K87
DD50P-1A6N-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1A5N-K87-146
For performance class 2 add -A191. Example: DE9P-1A5N-A191-K87
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
A
2,54 (.100)
C
3,70 (.146)
5,08 (.200)
B
E
D
9,40 (.370)
L
1,00 (.039)
10°
Ø 0,60 (.024)
BRACKET,
PLASTIC
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
26
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
90° Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DE9S-1A5N-A197
DA15S-1A5N-A197
DB25S-1A5N-A197
DC37S-1A5N-A197
DD50S-1A5N-A197
Captive Nut
#4-40 UNC
DE9S-1AUN-A197
DA15S-1AUN-A197
DB25S-1AUN-A197
DC37S-1AUN-A197
DD50S-1AUN-A197
Captive Nut
M3
DE9S-1ATN-A197
DA15S-1ATN-A197
DB25S-1ATN-A197
DC37S-1ATN-A197
DD50S-1ATN-A197
Post
#4-40 UNC
DE9S-1A6N-A197
DA15S-1A6N-A197
DB25S-1A6N-A197
DC37S-1A6N-A197
DD50S-1A6N-A197
Notes: For push/boardlock option add -146. Example: DE9S-1A5N-A197-146
For performance class 2 add -A191. Example: DE9S-1A5N-A191-A197
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
2,54 (.100)
A
3,70 (.146)
5,08 (.200)
C
B
E
D
9,40 (.370)
L
1,00 (.039)
10°
Ø 0,60 (.024)
BRACKET,
PLASTIC
2,54 (.100)
3,70 (.146)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
27
D Subminiature
ZD*
90° Solder Termination (Stamped) — European Footprint 10,2 mm
Plug
Part Numbers
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Shell Size
DE
DA
DB
DC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
ZDEL9P-1AKN-146
ZDAL15P-1AKN-146
ZDBL25P-1AKN-146
ZDCL37P-1AKN-146
Layout
9
15
25
37
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
ZDE9P-1AKN-146
ZDA15P-1AKN-146
ZDB25P-1AKN-146
ZDC37P-1AKN-146
Note: For contacts with 30 microinches gold add -A191. Example: ZDEL9P-1AKN-A191-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
(.387 - .365)
Engaging Face
A
C
B
8,61 - 8,11
(.339 - .319)
12,93 - 12,17
(.509 - .479)
1,00 (.039)
10°
2X GROUNDING HOOK
Dimensions
Shell Size
DE
DA
DB
DC
28
A
±0,38 (.015)
30,89 (1.216)
39,09 (1.539)
53,09 (2.090)
69,40 (2.732)
B
±0,25 (.010)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
ZD*
90° Solder Termination (Stamped) — European Footprint 10,2 mm
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
ZDEL9S-1AKN-146
ZDAL15S-1AKN-146
ZDBL25S-1AKN-146
ZDCL37S-1AKN-146
Layout
9
15
25
37
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
ZDE9S-1AKN-146
ZDA15S-1AKN-146
ZDB25S-1AKN-146
ZDC37S-1AKN-146
Note: For contacts with -A191 microinches gold add -A191. Example: ZDEL9S-1AKN-A191-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
( .385 - .365)
Engaging Face
A
C
8,15 - 7,65
(.321 - .301)
B
12,93 - 12,17
(.509 - .479)
1,00 (.039)
10°
2X GROUNDING HOOK
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,89 (1.216)
39,09 (1.539)
53,09 (2.090)
69,40 (2.732)
B
±0,25 (.010)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
Dimensions are shown in mm (inch)
Dimensions subject to change
29
D Subminiature
Cable Selection Guide
D* — Solder Cup Termination (Machined) with Tin Shells
D* solder cup connectors are used for cable or
panel mount wiring applications. Solder cup
connectors provide maximum flexibility and
performance for applications requiring discrete
solder terminations and field repair without
termination tooling.
Product Features
ɀ Machined solder cup termination, 5 A current
capacity
ɀ High performance commercial class
connectors
ɀ Two contact performance classes
ɀ Optional clinch nuts with #4-40 UNC or M3
threads
See pages 32-33.
ZD* — Solder Cup Termination (Stamped) with Tin Shells
ZD* solder cup connectors are used for cable or
panel mount wiring applications. Solder cup
connectors provide maximum flexibility and
performance for applications requiring discrete
solder terminations.
Product Features
ɀ Stamped solder cup termination, 5 A current
capacity
ɀ Economical
See pages 34-35.
D*A — Crimp Connectors without Contacts
D*A crimp contact connectors are designed for
reliable, fast cabling. Available in the industry
standard D*A housing, the connectors provide a
low-cost, quick cabling alternative compared to
soldering.
Product Features
The D*W connector provides insulation
displacement connection technology for either
solid or stranded wires. With D*W, speed of
cabling is increased significantly over solder cup
or crimp solutions. Contacts are easily removable
and replaceable. Several specialized accessories
(including shield cans, ferrules, and plastic boots)
are available to provide a complete product
solution.
Product Features
ɀ Crimp contacts available in reels of 5,000
ɀ Application tooling:
– Hand or automatic
– Stripper crimper
See pages 36-37.
D*W — Discrete Wire IDC
ɀ Quick harnessing capability with simple hand
or semi-automatic tooling
ɀ Accepts 30 AWG to 20 AWG wire; sizes can
be mixed
ɀ Shield cans insure reliable shielding continuity
See pages 38-41.
30
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
−55°C to 125°C
5A
10 mȉ
−55°C to 105°C
5A
15 mȉ
Description
Shell/Hardware
Insulator
Contacts
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel in mating area,
Tin on balance
Materials and Finishes
Description
Shell
Insulator
Contacts
1000 VAC at Sea Level
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
Materials and Finishes
1250 VAC
Specifications
Temperature
Rating
Current Rating
Contact
Resistance
Dielectric
Withstanding
Voltage
Cable Selection Guide
−55°C to 105°C
5 A (20 AWG)
15 mȉ
Materials and Finishes
Description
Shell/Hardware
Insulator
Contacts
500 VAC at Sea Level
Specifications
Temperature
Rating −55°C to 125°C
Current Rating 3 A (20 AWG)
2 A (22 AWG)
1,4 A (24 AWG)
1,2 A (26 AWG)
1 A (28 AWG)
0,8 A (30 AWG)
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description
Shell/Hardware
Insulator
Contacts
Dimensions are shown in mm (inch)
Dimensions subject to change
31
D Subminiature
D*
Solder Cup Termination (Machined) with Tin Shells
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Layout
9
15
25
37
50
Clinch Nut
#4-40 UNC
DEE9PK87
DAE15PK87
DBE25PK87
DCE37PK87
DDE50PK87
Through Hole
DE9PK87
DA15PK87
DB25PK87
DC37PK87
DD50PK87
Clinch Nut
M3
DEX9PK87
DAX15PK87
DBX25PK87
DCX37PK87
DDX50PK87
Note: For performance class 2, add A191. Example: DA15PA191K87.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
A
5,69 (.224)
C
Ø 3,05 (.120)
B
2,84 (.112)
POSITION 1
D
E
L
10°
2,84 (.112)
10,72 (.422)
MAX
W
L
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
32
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*
Solder Cup Termination (Machined) with Tin Shells
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Clinch Nut
#4-40 UNC
DEE9SA197
DAE15SA197
DBE25SA197
DCE37SA197
DDE50SA197
Through Hole
DE9SA197
DA15SA197
DB25SA197
DC37SA197
DD50SA197
Clinch Nut
M3
DEX9SA197
DAX15SA197
DBX25SA197
DCX37SA197
DDX50SA197
Note: For performance class 2, add A191. Example: DA15SA191A197.
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Engaging Face
DD Configuration
A
C
5,69 (.224)
Ø 3,05 (.120)
B
2,84 (.112)
POSITION 1
D
E
L
10°
2,84 (.112)
9,91 (.390)
MAX
L
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
33
D Subminiature
ZD*
Solder Cup Termination (Stamped) with Tin Shells
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
Layout
9
15
25
37
50
Through Hole
ZDE9P
ZDA15P
ZDB25P
ZDC37P
ZDD50P
DD Configuration
A
5,69 (.224)
C
2,84 (.112)
B
Ø 3,05 (.120)
POSITION 1
K
E
D
L
10°
2,84 (.112)
10,72 (.422)
MAX
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
34
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
ZD*
Solder Cup Termination (Stamped) with Tin Shells
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
ZDE9S
ZDA15S
ZDB25S
ZDC37S
ZDD50S
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
DD Configuration
A
5,69 (.224)
C
B
2,84 (.112)
Ø 3,05 (.120)
POSITION 1
K
E
D
L
10°
2,84 (.112)
10,72 (.422)
MAX
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
35
D Subminiature
D*A
Crimp Connectors without Contacts
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEA9PK87FO
DAA15PK87FO
DBA25PK87FO
DCA37PK87FO
Note: For crimp (size 20) contacts and tooling, see pages 83 & 275.
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
Ø 3,05 (.120)
B
POSITION 1
D
E
10°
K
10,93 (.430)
L
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
36
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*A
Crimp Connectors without Contacts
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEA9SA197FO
DAA15SA197FO
DBA25SA197FO
DCA37SA197FO
Note: For crimp (size 20) contacts and tooling, see pages 83 & 275.
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
Ø 3,05 (.120)
B
POSITION 1
D
E
10°
10,93 (.430)
K
L
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
37
D Subminiature
D*W
Discrete Wire IDC
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Layout
9
15
25
37
Clinch Nut
#4-40 UNC
DEWE9P*
DAWE15P*
DBWE25P*
DCWE37P*
Through Hole
DEW9P*
DAW15P*
DBW25P*
DCW37P*
Through Hole
& Shield Can Kit
DEW9P*G
DAW15P*G
DBW25P*G
DCW37P*G
Clinch Nut #4-40 UNC
& Shield Can Kit
DEWE9P*G
DAWE15P*G
DBWE25P*G
DCWE37P*G
Note: *Insert contact type. Example: DEW9P1.
For contacts with 0,76 Ȗm gold add -A176. Example: DEW9P1-A176.
For shield can kit, see page 40.
Contact Types*
1
2
3
Wire Accommodation
28 AWG/30 AWG
22 AWG/26 AWG
20 AWG/22 AWG
For more information, see pages 40-41.
Engaging Face
A
F
C
1,33
(.052)
B
10°
1
13
E
7,00
(.276)
D
14
G MAX
25
Ø 3,05 (.120)
14,50
(.571)
L
Rear Face
H
J
Dimensions
Shell Size
DEW
DAW
DBW
DCW
38
Layout
9
15
25
37
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,03 (2.048)
69,32 (2.729)
B
±0,12 (.005)
16,91 (.666)
25,54 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,12 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,35 (.329)
8,35 (.329)
8,35 (.329)
8,35 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,71 (.422)
10,71 (.422)
10,82 (.426)
10,82 (.426)
G
max.
6,05 (.238)
6,05 (.238)
5,99 (.236)
5,99 (.236)
H
±0,25 (.010)
19,27 (.759)
27,50 (1.083)
41,27 (1.625)
57,70 (2.272)
J
±0,25 (.010)
10,71 (.422)
10,71 (.422)
10,71 (.422)
10,71 (.422)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*W
Discrete Wire IDC
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Clinch Nut
#4-40 UNC
DEWE9S*
DAWE15S*
DBWE25S*
DCWE37S*
Through Hole
DEW9S*
DAW15S*
DBW25S*
DCW37S*
Through Hole
& Shield Can Kit
DEW9S*G
DAW15S*G
DBW25S*G
DCW37S*G
Clinch Nut #4-40 UNC
& Shield Can Kit
DEWE9S*G
DAWE15S*G
DBWE25S*G
DCWE37S*G
Note: *Insert contact type. Example: DEW9S1.
For contacts with 0,76 Ȗm gold add -A176. Example: DEW9S1-A176.
For shield can kit, see page 40.
Selection Guide
ɀ For Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Contact Types*
1
2
3
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Wire Accommodation
28 AWG/30 AWG
22 AWG/26 AWG
20 AWG/22 AWG
For more information, see pages 40-41.
Engaging Face
A
F
C
1,20
(.047)
B
10°
G MAX
1
13
E
7,00
(.276)
D
25
14
Ø 3,05 (.120)
14,50
(.571)
L
H
±0,25 (.010)
19,27 (.759)
27,50 (1.083)
41,27 (1.625)
57,70 (2.272)
J
±0,25 (.010)
10,71 (.422)
10,71 (.422)
10,71 (.422)
10,71 (.422)
Rear Face
H
J
Dimensions
Shell Size
DEW
DAW
DBW
DCW
Layout
9
15
25
37
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,03 (2.048)
69,32 (2.729)
B
±0,12 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
55,84 (2.159)
C
±0,12 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,89 (.429)
10,89 (.429)
10,89 (.429)
10,89 (.429)
G
max.
6,30 (.248)
6,30 (.248)
6,30 (.248)
6,30 (.248)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
39
D Subminiature
D*W
Shield Can Kit
Ferrule
D*W
DEW9G
DBW25G
Materials and Finishes
Shield Can and Ferrule
Material:
Steel
Finish:
Tin
Ferrule
XA
6,25 (.246)
6,25 (.246)
8,20 (.323)
8,20 (.323)
11,50 (.452)
11,50 (.452)
6,25 (.246)
6,25 (.246)
8,20 (.323)
8,20 (.323)
11,50 (.452)
11,50 (.452)
X Cable
4,8-5,5
5,5-6,2
6,2-7,2
7,2-8,2
8,2-9,5
9,5-11,1
4,8-5,5
5,5-6,2
6,2-7,2
7,2-8,2
8,2-9,5
9,5-11,1
Ferrule
Part Number
304-8810-000
304-8810-000
304-8811-000
304-8811-000
304-8812-000
304-8813-000
304-8810-000
304-8810-000
304-8811-000
304-8811-000
304-8812-000
304-8813-000
Crimp Tool
Part Number
D115433-1
D115433-1
D115433-2
D115433-2
D115433-3
D115433-3
D115433-1
D115433-1
D115433-2
D115433-2
D115433-3
D115433-3
Crimp Tool
Position
B
A
B
A
B
A
B
A
B
A
B
A
38,80(1.528)
WIRES
BRAID
FERRULE
FERRULE, MUST
BE PURCHASED
SEPARATELY.
32,60(1.283)
16,70
(.657)
FERRULE
CABLE
CABLE
39,80
(1.567)
60°
35,00
(1.378)
Ø10,00
(.394)
10,10
(.398)
Ferrule
Wire Trim Dimensions
Crimp Tool Positions
11,25(.443)
Ø 11,10(.437)
ØA
10,00(.394)
50,00 (1.969)
40
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
D*W
Discrete Wire IDC Contacts
Contacts
Contact Types
Pin
Socket
1
330-8753-101
330-8754-101
2
330-8753-102
330-8754-102
3
330-8753-103
330-8754-103
Solid Cable
Wire Size
Section mm2
Internal dia. mm max
External dia. mm max
28 AWG
0.08
0.32
1.30
30 AWG
0.05
0.26
1.20
22 AWG
0.34
0.62
1.45
24 AWG
0.22
0.51
1.45
26 AWG
0.12
0.40
1.40
20 AWG
0.60
0.88
1.45
22 AWG
0.34
0.62
1.45
28 AWG
0.09
7 x 0.13
0.40
1.30
30 AWG
0.05
7 x 0.10
0.30
1.20
22 AWG
0.34
7 x 0.25
0.75
1.45
24 AWG
0.22
7 x 0.20
0.60
1.45
26 AWG
0.12
7 x 0.15
0.45
1.40
20 AWG
0.60
19 x 0.20
0.97
1.45
22 AWG
0.34
7 x 0.25
0.75
1.45
Stranded Cable
Wire Size
Section mm2
Composition
Internal cable dia. mm max
External wire dia. mm max
Insulation Displacement Connection Concept
Tooling
Extraction Tool
Hand Crimp Tool
Part Number
DW115394
Part Number
Standard Tool: DW115394-1
Automatic Tool: DW115394-2
Tool Support: DW115394-20
Row by Row Pneumatic Press
Part Number
DW115394-501
Dimensions are shown in mm (inch)
Dimensions subject to change
41
Combo D
D Subminiature
Selection Index
Page
Combo D
An Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Combo D PCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option)
Coaxial 90° — Standard Footprint .318ɍ or .283ɍɍ inch (Sizes DE-DC) . . . . . . . . . . . 44
Coaxial 90° — Standard Footprint .489ɍ or .454ɍɍ inch (Size DD) . . . . . . . . . . . . . . 46
13C3 Special — Receptacle Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3C3 Shielded Special — Receptacle Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Coaxial 90° — European Footprint 10,2ɍ or 9,4ɍɍ mm (Sizes DE-DC). . . . . . . . . . . . 50
Coaxial Straight — Standard PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Coaxial Straight — Standard PC Tails (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Coaxial Straight — European PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Coaxial Straight — European PC Tails (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Combo D PCB Connectors with High Power Contacts
40 A High Power 90° — Standard Footprint .489ɍ or .454ɍɍ inch (Sizes DE-DC) . . . 60
40 A High Power 90° — Standard Footprint .489ɍ or .454ɍɍ inch (Size DD) . . . . . . . 62
40 A High Power 90° — European Footprint 10,2ɍ or 9,4ɍɍ mm (Sizes DE-DC) . . . . 64
40 A High Power Straight — Standard PC Tails (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . 66
40 A High Power Straight — Standard PC Tails (Size DD). . . . . . . . . . . . . . . . . . . . . . . 68
40 A High Power Straight — European PC Tails (Sizes DE-DC). . . . . . . . . . . . . . . . . . . 70
40 A High Power Straight — European PC Tails (Size DD) . . . . . . . . . . . . . . . . . . . . . . 72
Combo D PCB Connectors with (Size 20) Signal Contacts Only
90° — European Footprint 10,2ɍ or 9,4ɍɍ mm (Sizes DE-DD). . . . . . . . . . . . . . . . . . 74
Straight PC Tails — European (Sizes DE-DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Solder Cup (Sizes DE-DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Combo D PCB Crimp Connectors without Contacts (Sizes DA-DD) . . . . . . . . . . . . . . . . 80
Loose Contacts and Tooling
Shield Cans and Crimp Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Crimp (Size 20) Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Cable (Size 8) Loose Contacts
Coaxial 75 Ohm and Tooling — Straight Stamped Crimp/Crimp. . . . . . . . . . . . . . . . . 84
Coaxial 75 Ohm and Tooling — 90° Crimp Braid/Solder Center Contact . . . . . . . . . . 85
Coaxial 50 Ohm — Straight Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Coaxial 50 Ohm — 90° Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Insertion/Extraction Instructions for Coaxial,
High Power and High Voltage Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . 88
Coaxial Assembly Instructions and Crimp Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
High Power and Tooling — Straight Solder or Crimp . . . . . . . . . . . . . . . . . . . . . . . . . 90
High Voltage — Straight / 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
PCB (Size 8) Loose Contacts
Coaxial 75 Ohm — Straight / 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
High Power — Straight / 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
High Voltage — Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
PCB Guide Pin and Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
ɍ Connector footprint measured from front shell.
ɍɍ Connector footprint measured from rear shell.
42
Dimensions are shown in mm (inch)
Dimensions subject to change
D S ubm i n i atur e
M i l i tar y/H i gh R el i abi l i ty
I
TT Cannon Military/High Reliability D
Subminiature connectors are used in many
applications, including aerospace,
transportation, communication systems,
information systems and test equipment. Being the
inventor of the D Subminiature connector,
ITT Cannon is able to use its extensive design
expertise and high quality manufacturing
processes to insure the optimum performance and
reliability.
The D Subminiature connectors with fixed
contacts in solder cup, straight and 90° PC contact
terminations are qualified to MIL-C-24308 (see
cross reference, pages 142-143). These highreliability D Subminiature connectors are the finest
quality connectors available at the most
competitive prices in the market.
Applications:
Aerospace
Transportation
Communication Systems
Information Systems
Test Equipment
Product Features
Suitable for a variety of cable and printed
circuit board options
Solder cup version accommodates wire size
20 AWG maximum
5 A standard current rating
Clinch Nut and Float Mount Options
Specifications
Temperature Rating − 55°C to 125°C
Signal Contact Current Rating 7.5 A current capacity
Signal Contact Resistance
Coaxial VSWR
Coaxial Insertion Loss
55 millivolt max. at 7.5 test current
Signal Contact
Dielectric Withstanding Voltage 1250 VAC at Sea Level
Coaxial Current Rating 5 A
Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level
Coaxial Impedance
High Power Current Rating
High Power
Dielectric Withstanding Voltage
High Voltage Current Rating
High Voltage Contact
Dielectric Withstanding Voltage
75 or 50
Less than 1.30+ .03F for F up to 500 MHz
.3dB loss at 500 MHz
Up to 40 A
1000 VAC at Sea Level
5A
2800 V at Sea Level
Materials and Finishes
Des cription
S hell
Material
S teel
Ins ulator
Contacts (Military)
Contacts (Commercial)
Dual Float Mount Hardware
Clinch Nut Hardware
S tandoff
Plastic Bracket
Metal Bracket
Polyes ter, UL 94V-0, Color: Green
Copper Alloy
Copper Alloy
Stainless Steel
Stainless Steel with plastic insert
S teel
Thermoplastic, UL 94V-0
S teel
Finis h/Treatment
Yellow Chromate over Zinc
(Cadmium available upon request; order code -A101)
None
50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance
Gold over Nickel on mating area, Tin on balance
Passivated
Passivated
Trivalent Chromate over Zinc
None
Zinc ( Tin if boardlocks are attached)
Coaxial/High Power/High Voltage Contact Assemblies
Contacts and Outer Shells
Ring, Retaining
Ins ulator ( Coaxial Only)
Insulator (High Voltage Only)
Copper Alloy
Copper Alloy
Teflon
Thermoplastic
Gold over Nickel
Nickel
None
None
Dimensions are shown in mm (inch)
Dimensions subject to change131
Combo D
D Subminiature
Coaxial 90° — Standard Footprint .318ɍ or .283 inchɍɍ (Sizes DE-DC)
Plug
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 228-229.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMP5C1PJK87
DAMP7C2PJK87
DAMP11C1PJK87
DAMP3C3PJK87
DAMP3CK3PJK87TM
DBMP5C5PJK87
DBMP9C4PJK87
DBMP13C3PJK87
DBMP17C2PJK87
DBMP21C1PJK87
DCMP8C8PJK87
DCMP13C6PJK87
DCMP17C5PJK87
DCMP21CA4PJK87
DCMP25C3PJK87
DCMP27C2PJK87
Part Number
Without Screw Locks
With Boardlocks
DEMC5C1PJK87
DAMC7C2PJK87
DAMC11C1PJK87
DAMC3C3PJK87
DAMC3CK3PJK87TM
DBMC5C5PJK87
DBMC9C4PJK87
DBMC13C3PJK87
DBMC17C2PJK87
DBMC21C1PJK87
DCMC8C8PJK87
DCMC13C6PJK87
DCMC17C5PJK87
DCMC21CA4PJK87
DCMC25C3PJK87
DCMC27C2PJK87
Part Number
With Screw Locks
Without Boardlocks
DEMD5C1PJK87
DAMD7C2PJK87
DAMD11C1PJK87
DAMD3C3PJK87
DAMD3CK3PJK87TM
DBMD5C5PJK87
DBMD9C4PJK87
DBMD13C3PJK87
DBMD17C2PJK87
DBMD21C1PJK87
DCMD8C8PJK87
DCMD13C6PJK87
DCMD17C5PJK87
DCMD21CA4PJK87
DCMD25C3PJK87
DCMD27C2PJK87
Part Number
With Screw Locks
With Boardlocks
DEMG5C1PJK87
DAMG7C2PJK87
DAMG11C1PJK87
DAMG3C3PJK87
DAMG3CK3PJK87TM
DBMG5C5PJK87
DBMG9C4PJK87
DBMG13C3PJK87
DBMG17C2PJK87
DBMG21C1PJK87
DCMG8C8PJK87
DCMG13C6PJK87
DCMG17C5PJK87
DCMG21CA4PJK87
DCMG25C3PJK87
DCMG27C2PJK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PJK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5C1PJK127
For DD shell sizes, see page 46.
ឮ Keyed.
0,56
(.023)
Engaging Face
Ø 0,51
(.020)
2,54
(.100)
A
C
3,89 (.153)
MIN
B
11,94 ± 0,33
(.470 ± .013)
E
D
L
Screw lock, boardlock, and signal contacts
removed for clarity
BOARDLOCK
10°
Ø 0,76
(.030)
0,82
(.032)
2,92
(.115)
2,84
(.112)
BRACKET,
METAL
12,34
(.486) 8,64
(.340)
4,33 ± 0,38
(.170 ± .015)
7,18 ± 0,25
(.283 ± .010)
RIVNUT
#4-40 UNC
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and coaxial contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
44
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial 90° — Standard Footprint .318ɍ or .283 inchɍɍ (Sizes DE-DC)
Receptacle
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 231-232.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMP5C1SJA197
DAMP7C2SJA197
DAMP11C1SJA197
DAMP3C3SJA197
DAMP3CK3SJA197TM
DBMP5C5SJA197
DBMP9C4SJA197
DBMP13C3SJA197
DBMP17C2SJA197
DBMP21C1SJA197
DCMP8C8SJA197
DCMP13C6SJA197
DCMP17C5SJA197
DCMP21CA4SJA197
DCMP25C3SJA197
DCMP27C2SJA197
Part Number
Without Screw Locks
With Boardlocks
DEMC5C1SJA197
DAMC7C2SJA197
DAMC11C1SJA197
DAMC3C3SJA197
DAMC3CK3SJA197TM
DBMC5C5SJA197
DBMC9C4SJA197
DBMC13C3SJA197
DBMC17C2SJA197
DBMC21C1SJA197
DCMC8C8SJA197
DCMC13C6SJA197
DCMC17C5SJA197
DCMC21CA4SJA197
DCMC25C3SJA197
DCMC27C2SJA197
Part Number
With Screw Locks
Without Boardlocks
DEMD5C1SJA197
DAMD7C2SJA197
DAMD11C1SJA197
DAMD3C3SJA197
DAMD3CK3SJA197TM
DBMD5C5SJA197
DBMD9C4SJA197
DBMD13C3SJA197
DBMD17C2SJA197
DBMD21C1SJA197
DCMD8C8SJA197
DCMD13C6SJA197
DCMD17C5SJA197
DCMD21CA4SJA197
DCMD25C3SJA197
DCMD27C2SJA197
Part Number
With Screw Locks
With Boardlocks
DEMG5C1SJA197
DAMG7C2SJA197
DAMG11C1SJA197
DAMG3C3SJA197
DAMG3CK3SJA197TM
DBMG5C5SJA197
DBMG9C4SJA197
DBMG13C3SJA197
DBMG17C2SJA197
DBMG21C1SJA197
DCMG8C8SJA197
DCMG13C6SJA197
DCMG17C5SJA197
DCMG21CA4SJA197
DCMG25C3SJA197
DCMG27C2SJA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SJA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEMP5C1SJK126
For DD Shell Sizes, see page 47.
ឮ Keyed.
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
Engaging Face
A
C
B
3,89 (.153)
MIN
11,94 ± 0,33
(.470 ± .013)
D
E
L
10°
BOARDLOCK
Ø 0,76
(.030)
2,92
(.115)
Screw lock, boardlock and signal contacts
removed for clarity
0,79
(.031)
12,34
(.486)
RIVNUT
#4-40 UNC
8,64
(.340)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
BRACKET,
METAL
7,18 ± 0,25
(.283 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock and coaxial contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47.04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
45
Combo D
D Subminiature
Coaxial 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Size DD)
Plug
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMP24C7PJK87
DDMP36C4PJK87
DDMP43C2PJK87
DDMP47C1PJK87
Part Number
Without Screw Locks
With Boardlocks
DDMC24C7PJK87
DDMC36C4PJK87
DDMC43C2PJK87
DDMC47C1PJK87
Part Number
With Screw Locks
Without Boardlocks
DDMD24C7PJK87
DDMD36C4PJK87
DDMD43C2PJK87
DDMD47C1PJK87
Part Number
With Screw Locks
With Boardlocks
DDMG24C7PJK87
DDMG36C4PJK87
DDMG43C2PJK87
DDMG47C1PJK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4PJK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24C7PJK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 230.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
SCREW LOCK
#4-40 UNC
W
6,50 ± 0,25
(.256 ± .010)
F
10,06
(.396)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
13,74
(.541)
5,68
(.224)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
BRACKET,
METAL
Screw lock, boardlock, and coaxial contacts
removed for clarity
Engaging Face
10°
L
E
11,94 ± 0,33
(.470 ± .013)
2,54
(.100)
Ø 0,51
(.020)
0,56
(.023)
D
0,82
(.032)
BOARDLOCK
3,89 (.153)
MIN
Ø 0,76
(.030)
2,92
(.115)
B
C
Screw lock, boardlock, and signal contacts
removed for clarity
A
Note: ɋ Dimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
46
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Size DD)
Receptacle
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMP24C7SJA197
DDMP36C4SJA197
DDMP43C2SJA197
DDMP47C1SJA197
Part Number
Without Screw Locks
With Boardlocks
DDMC24C7SJA197
DDMC36C4SJA197
DDMC43C2SJA197
DDMC47C1SJA197
Part Number
With Screw Locks
Without Boardlocks
DDMD24C7SJA197
DDMD36C4SJA197
DDMD43C2SJA197
DDMD47C1SJA197
Part Number
With Screw Locks
With Boardlocks
DDMG24C7SJA197
DDMG36C4SJA197
DDMG43C2SJA197
DDMG47C1SJA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4SJA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24C7SJK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 233.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
W
F
11,53 ± 0,25
(.454 ± .010)
10,06
(.396) 13,74
(.541)
RIVNUT
#4-40 UNC
5,68
(.224)
BRACKET,
METAL
4,33 ± 0,38
(.170 ± .015)
2,84 (.112)
Screw lock, boardlock, and coaxial contact
removed for clarity
Engaging Face
10°
L
2,54
(.100)
Ø 0,51
(.020)
D
E
11,94 ± 0,33
(.470 ± .013)
2,92
(.115)
3,89 (.153)
MIN
BOARDLOCK
Ø 0,76
(.030)
0,82
(.032)
B
0,56
(.023)
C
Screw lock, boardlock, and signal contacts
removed for clarity
A
Note: ɋ Dimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
47
Combo D
D-Subminiature
13C3 Special — Receptacle only
Receptacle
Part Number
Finishes
Signal and Coaxial
Center Contact Finish:
30 Ȗ inches Gold.
DB111949-43
Note: For additional materials and finishes, see introduction
page 43.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 236 (Rear
shell REF. is 0,76 (.030) from front shell).
ɀ For panel cutouts, see page 221.
Engaging Face
53,15 ± 0,35
(2.095 ± .014)
47,04
(1.852)
6,13 ± 0,13
(.241 ± .005)
38,38
(1.510)
12,91(.508)
MAX
A1 1
2,80 ± 0,25
(.110 ± .010)
48
A2
A3
7,87(.310)
6,27 ± 0,25
(.247 ± .010)
6
10°
BOARDLOCK
2,90 ± 0,21
(.114 ± .008)
10,17 (.400)
(SIGNAL AND COAX)
12,71 (.500)
(SIGNAL AND COAX)
15,25 (.600)
(COAX ONLY)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
3C3 Shielded Special — Receptacle only
Receptacle
Materials and Finishes
Body Material:
Body Finish:
Coaxial Center
Contact Finish:
Part Number
Zinc
Tin
DAM53512-1405
30 Ȗ inches Gold
Note: For additional materials and finishes, see introduction
page 43.
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 231.
ɀ For panel cutouts, see page 221.
Engaging Face
A
C
B
D
E
0,56
(.023)
10°
Ø 0,51
(.020)
4,19 - 2,79
(.165 - .110)
2,54
(.100)
12,12
(.477)
12,62
(.497)
F
9,37
(.369)
W
Note: Connector supplied with boardlocks.
Dimensions
Shell Size
DA
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
24,66 (.971)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
W
±0,25 (.010)
6,17 (.243)
Dimensions are shown in mm (inch)
Dimensions subject to change
49
Combo D
D Subminiature
Coaxial 90° — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DC)
Plug
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 234-235.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMP5C1PVK87
DAMP7C2PVK87
DAMP11C1PVK87
DAMP3C3PVK87
DAMP3CK3PVK87TM
DBMP5C5PVK87
DBMP9C4PVK87
DBMP13C3PVK87
DBMP17C2PVK87
DBMP21C1PVK87
DCMP8C8PVK87
DCMP13C6PVK87
DCMP17C5PVK87
DCMP21CA4PVK87
DCMP25C3PVK87
DCMP27C2PVK87
Part Number
Without Screw Locks
With Boardlocks
DEMC5C1PVK87
DAMC7C2PVK87
DAMC11C1PVK87
DAMC3C3PVK87
DAMC3CK3PVK87TM
DBMC5C5PVK87
DBMC9C4PVK87
DBMC13C3PVK87
DBMC17C2PVK87
DBMC21C1PVK87
DCMC8C8PVK87
DCMC13C6PVK87
DCMC17C5PVK87
DCMC21CA4PVK87
DCMC25C3PVK87
DCMC27C2PVK87
Part Number
With Screw Locks
Without Boardlocks
DEMD5C1PVK87
DAMD7C2PVK87
DAMD11C1PVK87
DAMD3C3PVK87
DAMD3CK3PVK87TM
DBMD5C5PVK87
DBMD9C4PVK87
DBMD13C3PVK87
DBMD17C2PVK87
DBMD21C1PVK87
DCMD8C8PVK87
DCMD13C6PVK87
DCMD17C5PVK87
DCMD21CA4PVK87
DCMD25C3PVK87
DCMD27C2PVK87
Part Number
With Screw Locks
With Boardlocks
DEMG5C1PVK87
DAMG7C2PVK87
DAMG11C1PVK87
DAMG3C3PVK87
DAMG3CK3PVK87TM
DBMG5C5PVK87
DBMG9C4PVK87
DBMG13C3PVK87
DBMG17C2PVK87
DBMG21C1PVK87
DCMG8C8PVK87
DCMG13C6PVK87
DCMG17C5PVK87
DCMG21CA4PVK87
DCMG25C3PVK87
DCMG27C2PVK87
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PVK87
For tin plated PC tails add A226 (signal contacts only). Example: DEMP5C1PVK87A226
For performance class 2 substitute K127 for K87. Example: DEMP5C1PVK127
For DD shell sizes (Standard footprint) see page 46.
ឮ Keyed.
Engaging Face
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
A
C
B
E
2,89 (.113) MIN
11,94 ± 0,33
(.470 ± .013)
D
L
1,00 (.039)
10°
BOARDLOCK
Ø 0,60
(.024)
0,82
(.032)
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
2,54
(.100)
BRACKET,
METAL
14,55
(.573) 10,85
(.427)
4,00 (.157)
9,40 ± 0,20
(.370 ± .008)
RIVNUT
#4-40 UNC
F
W
6,50 ± 0,25
(.256 ± .010)
Screw lock, boardlock, and coaxial contact
removed for clarity
SCREW LOCK
#4-40 UNC
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
50
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial 90° — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DC)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Receptacle
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 236-237.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Part Number
Without Screw Locks
Layout
Without Boardlocks
5W1
DEMP5C1SVA197
7W2
DAMP7C2SVA197
11W1
DAMP11C1SVA197
3W3
DAMP3C3SVA197
3WK3ឮ DAMP3CK3SVA197TM
5W5
DBMP5C5SVA197
9W4
DBMP9C4SVA197
13W3
DBMP13C3SVA197
17W2
DBMP17C2SVA197
21W1
DBMP21C1SVA197
8W8
DCMP8C8SVA197
13W6
DCMP13C6SVA197
17W5
DCMP17C5SVA197
21WA4
DCMP21CA4SVA197
25W3
DCMP25C3SVA197
27W2
DCMP27C2SVA197
Part Number
Without Screw Locks
With Boardlocks
DEMC5C1SVA197
DAMC7C2SVA197
DAMC11C1SVA197
DAMC3C3SVA197
DAMC3CK3SVA197TM
DBMC5C5SVA197
DBMC9C4SVA197
DBMC13C3SVA197
DBMC17C2SVA197
DBMC21C1SVA197
DCMC8C8SVA197
DCMC13C6SVA197
DCMC17C5SVA197
DCMC21CA4SVA197
DCMC25C3SVA197
DCMC27C2SVA197
Part Number
With Screw Locks
Without Boardlocks
DEMD5C1SVA197
DAMD7C2SVA197
DAMD11C1SVA197
DAMD3C3SVA197
DAMD3CK3SVA197TM
DBMD5C5SVA197
DBMD9C4SVA197
DBMD13C3SVA197
DBMD17C2SVA197
DBMD21C1SVA197
DCMD8C8SVA197
DCMD13C6SVA197
DCMD17C5SVA197
DCMD21CA4SVA197
DCMD25C3SVA197
DCMD27C2SVA197
Part Number
With Screw Locks
With Boardlocks
DEMG5C1SVA197
DAMG7C2SVA197
DAMG11C1SVA197
DAMG3C3SVA197
DAMG3CK3SVA197TM
DBMG5C5SVA197
DBMG9C4SVA197
DBMG13C3SVA197
DBMG17C2SVA197
DBMG21C1SVA197
DCMG8C8SVA197
DCMG13C6SVA197
DCMG17C5SVA197
DCMG21CA4SVA197
DCMG25C3SVA197
DCMG27C2SVA197
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SVA197
For performance class 2 substitute K126 for A197. Example: DEMP5C1SVK126
For DD shell sizes (standard footprint) see page 47.
ឮ Keyed.
0,56
(.023)
Engaging Face
Ø 0,51
(.020)
A
C
2,89 (.113) MIN
2.54
(.100)
B
E
11,94 ± 0,33
(.470 ± .013)
D
L
1,00 (.039)
2,92
(.115)
10°
BOARDLOCK
Ø 0,60
(.024)
0,82
(.032)
Screw lock, boardlock, and signal contacts
removed for clarity
2,54
(.100)
4,00 (.157)
BRACKET,
METAL
14,55
(.573) 10,85
(.427)
9,40 ± 0,20
(.370 ± .008)
RIVNUT
#4-40 UNC
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
F
Screw lock, boardlock, and coaxial contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
51
Combo D
D Subminiature
Coaxial Straight — Standard PC Tails (Sizes DE-DC)
Plug
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 238-239.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMV5C1PNK87
DAMV7C2PNK87
DAMV11C1PNK87
DAMV3C3PNK87
DAMV3CK3PNK87TM
DBMV5C5PNK87
DBMV9C4PNK87
DBMV13C3PNK87
DBMV17C2PNK87
DBMV21C1PNK87
DCMV8C8PNK87
DCMV13C6PNK87
DCMV17C5PNK87
DCMV21CA4PNK87
DCMV25C3PNK87
DCMV27C2PNK87
Part Number
Without Screw Locks
With Boardlocks
DEMZ5C1PNK87
DAMZ7C2PNK87
DAMZ11C1PNK87
DAMZ3C3PNK87
DAMZ3CK3PNK87TM
DBMZ5C5PNK87
DBMZ9C4PNK87
DBMZ13C3PNK87
DBMZ17C2PNK87
DBMZ21C1PNK87
DCMZ8C8PNK87
DCMZ13C6PNK87
DCMZ17C5PNK87
DCMZ21CA4PNK87
DCMZ25C3PNK87
DCMZ27C2PNK87
Part Number
With Screw Locks
With Boardlocks
DEMN5C1PNK87
DAMN7C2PNK87
DAMN11C1PNK87
DAMN3C3PNK87
DAMN3CK3PNK87TM
DBMN5C5PNK87
DBMN9C4PNK87
DBMN13C3PNK87
DBMN17C2PNK87
DBMN21C1PNK87
DCMN8C8PNK87
DCMN13C6PNK87
DCMN17C5PNK87
DCMN21CA4PNK87
DCMN25C3PNK87
DCMN27C2PNK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PNK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN5C1PNK127
For DD shell sizes, see page 54.
ឮ Keyed.
Engaging Face
2,54
(.100)
A
C
Ø 0,51
(.020)
0,62
(.024)
B
E
D
L
10°
Screw lock, boardlock, and signal contacts
removed for clarity
Ø 0,76
(.030)
BOARDLOCK
0,82
(.032)
3,45 (.136)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
52
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial Straight — Standard PC Tails (Sizes DE-DC)
Receptacle
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 241-242.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMV5C1SNA197
DAMV7C2SNA197
DAMV11C1SNA197
DAMV3C3SNA197
DAMV3CK3SNA197TM
DBMV5C5SNA197
DBMV9C4SNA197
DBMV13C3SNA197
DBMV17C2SNA197
DBMV21C1SNA197
DCMV8C8SNA197
DCMV13C6SNA197
DCMV17C5SNA197
DCMV21CA4SNA197
DCMV25C3SNA197
DCMV27C2SNA197
Part Number
Without Screw Locks
With Boardlocks
DEMZ5C1SNA197
DAMZ7C2SNA197
DAMZ11C1SNA197
DAMZ3C3SNA197
DAMZ3CK3SNA197TM
DBMZ5C5SNA197
DBMZ9C4SNA197
DBMZ13C3SNA197
DBMZ17C2SNA197
DBMZ21C1SNA197
DCMZ8C8SNA197
DCMZ13C6SNA197
DCMZ17C5SNA197
DCMZ21CA4SNA197
DCMZ25C3SNA197
DCMZ27C2SNA197
Part Number
With Screw Locks
With Boardlocks
DEMN5C1SNA197
DAMN7C2SNA197
DAMN11C1SNA197
DAMN3C3SNA197
DAMN3CK3SNA197TM
DBMN5C5SNA197
DBMN9C4SNA197
DBMN13C3SNA197
DBMN17C2SNA197
DBMN21C1SNA197
DCMN8C8SNA197
DCMN13C6SNA197
DCMN17C5SNA197
DCMN21CA4SNA197
DCMN25C3SNA197
DCMN27C2SNA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SNA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN5C1SNK126
For DD shell sizes, see page 55.
ឮ Keyed.
Engaging Face
A
Ø 0,51
(.020)
2,54
(1.00)
C
0,62
(.024)
B
E
D
L
10°
BOARDLOCK
3,45 (.136)
Hardware and signal contacts
removed for clarity
0,82
(.032)
Ø 0,76
(.030)
4,52 (.178)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
F
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
53
Combo D
D Subminiature
Coaxial Straight — Standard PC Tails (Size DD)
Plug
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24C7PNK87
DDMV36C4PNK87
DDMV43C2PNK87
DDMV47C1PNK87
Part Number
Without Screw Locks
With Boardlocks
DDMZ24C7PNK87
DDMZ36C4PNK87
DDMZ43C2PNK87
DDMZ47C1PNK87
Part Number
With Screw Locks
With Boardlocks
DDMN24C7PNK87
DDMN36C4PNK87
DDMN43C2PNK87
DDMN47C1PNK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PNK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DDMN24C7PNK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 240.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
A
Ø 0,51
(.020)
C
2,54
(.100)
B
0,62
(.024)
D
E
L
10°
Hardware and signal contacts
removed for clarity
BOARDLOCK
0,82
(.032)
3,45
(.136)
Ø 0,76
(.030)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
5,69
(.224)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
F
W
SCREW LOCK
#4-40 UNC
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DD
54
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial Straight — Standard PC Tails (Size DD)
Receptacle
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24C7SNA197
DDMV36C4SNA197
DDMV43C2SNA197
DDMV47C1SNA197
Part Number
Without Screw Locks
With Boardlocks
DDMZ24C7SNA197
DDMZ36C4SNA197
DDMZ43C2SNA197
DDMZ47C1SNA197
Part Number
With Screw Locks
With Boardlocks
DDMN24C7SNA197
DDMN36C4SNA197
DDMN43C2SNA197
DDMN47C1SNA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SNA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DDMN24C7SNK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 243.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
A
2,54
(.100)
C
Ø 0,51
(.020)
0,62
(.024)
B
D
E
L
Hardware and signal contacts
removed for clarity
10°
BOARDLOCK
0,82
(.032)
3,45
(.136)
5,69
(.224)
Ø 0,76
(.030)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
F
W
SCREW LOCK
#4-40 UNC
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
55
Combo D
D Subminiature
Coaxial Straight — European PC Tails (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Plug
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 238-239.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Part Number
Without Screw Locks
Without Boardlocks
DEMV5C1PYK87
DAMV7C2PYK87
DAMV11C1PYK87
DAMV3C3PYK87
DAMV3CK3PYK87TM
DBMV5C5PYK87
DBMV9C4PYK87
DBMV13C3PYK87
DBMV17C2PYK87
DBMV21C1PYK87
DCMV8C8PYK87
DCMV13C6PYK87
DCMV17C5PYK87
DCMV21CA4PYK87
DCMV25C3PYK87
DCMV27C2PYK87
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
With Boardlocks
DEMZ5C1PYK87
DAMZ7C2PYK87
DAMZ11C1PYK87
DAMZ3C3PYK87
DAMZ3CK3PYK87TM
DBMZ5C5PYK87
DBMZ9C4PYK87
DBMZ13C3PYK87
DBMZ17C2PYK87
DBMZ21C1PYK87
DCMZ8C8PYK87
DCMZ13C6PYK87
DCMZ17C5PYK87
DCMZ21CA4PYK87
DCMZ25C3PYK87
DCMZ27C2PYK87
Part Number
With Screw Locks
With Boardlocks
DEMN5C1PYK87
DAMN7C2PYK87
DAMN11C1PYK87
DAMN3C3PYK87
DAMN3CK3PYK87TM
DBMN5C5PYK87
DBMN9C4PYK87
DBMN13C3PYK87
DBMN17C2PYK87
DBMN21C1PYK87
DCMN8C8PYK87
DCMN13C6PYK87
DCMN17C5PYK87
DCMN21CA4PYK87
DCMN25C3PYK87
DCMN27C2PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PYK87
For tin plated PC tails add A226 (signal contacts only). Example: DEMV5C1PYK87A226
For performance class 2 substitute K127 for K87. Example: DEMV5C1PYK127
For DD shell sizes, see page 58.
ឮ Keyed.
Engaging Face
A
Ø 0,51
(.020)
2,54
(.100)
C
0,62
(.024)
B
D
E
L
10°
BOARDLOCK
Hardware and signal contacts
removed for clarity
0,82
(.032)
Ø 0,60
(.024)
3,45
(.136)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,91
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
56
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial Straight — European PC Tails (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Receptacle
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 241-242.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMV5C1SYA197
DAMV7C2SYA197
DAMV11C1SYA197
DAMV3C3SYA197
DAMV3CK3SYA197TM
DBMV5C5SYA197
DBMV9C4SYA197
DBMV13C3SYA197
DBMV17C2SYA197
DBMV21C1SYA197
DCMV8C8SYA197
DCMV13C6SYA197
DCMV17C5SYA197
DCMV21CA4SYA197
DCMV25C3SYA197
DCMV27C2SYA197
Part Number
Without Screw Locks
With Boardlocks
DEMZ5C1SYA197
DAMZ7C2SYA197
DAMZ11C1SYA197
DAMZ3C3SYA197
DAMZ3CK3SYA197TM
DBMZ5C5SYA197
DBMZ9C4SYA197
DBMZ13C3SYA197
DBMZ17C2SYA197
DBMZ21C1SYA197
DCMZ8C8SYA197
DCMZ13C6SYA197
DCMZ17C5SYA197
DCMZ21CA4SYA197
DCMZ25C3SYA197
DCMZ27C2SYA197
Part Number
With Screw Locks
With Boardlocks
DEMN5C1SYA197
DAMN7C2SYA197
DAMN11C1SYA197
DAMN3C3SYA197
DAMN3CK3SYA197TM
DBMN5C5SYA197
DBMN9C4SYA197
DBMN13C3SYA197
DBMN17C2SYA197
DBMN21C1SYA197
DCMN8C8SYA197
DCMN13C6SYA197
DCMN17C5SYA197
DCMN21CA4SYA197
DCMN25C3SYA197
DCMN27C2SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SYA197
For performance class 2 substitute K126 for A197. Example: DEMV5C1SYK126
For DD shell sizes, see page 59.
ឮ Keyed.
Engaging Face
2,54
(.100)
A
C
Ø 0,51
(.020)
0,62
(.024)
B
D
E
L
10°
Hardware and signal contacts
removed for clarity
BOARDLOCK
Ø 0,60
(.024)
0,82
(.032)
3,45
(.136)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
W
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0.38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
57
Combo D
D Subminiature
Coaxial Straight — European PC Tails (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Plug
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24C7PYK87
DDMV36C4PYK87
DDMV43C2PYK87
DDMV47C1PYK87
Part Number
Without Screw Locks
With Boardlocks
DDMZ24C7PYK87
DDMZ36C4PYK87
DDMZ43C2PYK87
DDMZ47C1PYK87
Part Number
With Screw Locks
With Boardlocks
DDMN24C7PYK87
DDMN36C4PYK87
DDMN43C2PYK87
DDMN47C1PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PYK87
For tin plated PC tails add A226 (signal contacts only). Example: DDMV24C7PYK87A226
For performance class 2 substitute K127 for K87. Example: DDMV24C7PYK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 240.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
Ø 0,51
(.020)
0,62
(.024)
A
2,54
(.100)
C
B
E
D
L
10°
BOARDLOCK
Hardware and signal contacts
removed for clarity
0,82
(.032)
3,45
(.136)
Ø 0,60
(.024)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
5,69
(.224)
2,84
(.112)
2,92
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DD
58
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial Straight — European PC Tails (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Receptacle
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24C7SYA197
DDMV36C4SYA197
DDMV43C2SYA197
DDMV47C1SYA197
Part Number
Without Screw Locks
With Boardlocks
DDMZ24C7SYA197
DDMZ36C4SYA197
DDMZ43C2SYA197
DDMZ47C1SYA197
Part Number
With Screw Locks
With Boardlocks
DDMN24C7SYA197
DDMN36C4SYA197
DDMN43C2SYA197
DDMN47C1SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SYA197
For performance class 2 substitute K126 for A197. Example: DDMV24C7SYK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 243.
ɀ For panel cutouts, see page 221.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
Ø 0,51
(.020)
0,62
(.024)
A
2,54
(.100)
C
B
D
E
L
Hardware and signal contacts
removed for clarity
10°
0,82
(.032)
BOARDLOCK
Ø 0,60
(.024)
3,45
(.136)
5,69
(.224)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
59
Combo D
D Subminiature
40 A High Power 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Sizes DE-DC)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 244-245.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Part Number
Without Screw Locks
Layout
Without Boardlocks
5W1
DEMP5H1PJK87
7W2
DAMP7H2PJK87
11W1
DAMP11H1PJK87
3W3
DAMP3H3PJK87
3WK3ឮ DAMP3HK3PJK87TM
5W5
DBMP5H5PJK87
9W4
DBMP9H4PJK87
13W3
DBMP13H3PJK87
17W2
DBMP17H2PJK87
21W1
DBMP21H1PJK87
8W8
DCMP8H8PJK87
13W6
DCMP13H6PJK87
17W5
DCMP17H5PJK87
21WA4
DCMP21HA4PJK87
25W3
DCMP25H3PJK87
27W2
DCMP27H2PJK87
Part Number
Without Screw Locks
With Boardlocks
DEMC5H1PJK87
DAMC7H2PJK87
DAMC11H1PJK87
DAMC3H3PJK87
DAMC3HK3PJK87TM
DBMC5H5PJK87
DBMC9H4PJK87
DBMC13H3PJK87
DBMC17H2PJK87
DBMC21H1PJK87
DCMC8H8PJK87
DCMC13H6PJK87
DCMC17H5PJK87
DCMC21HA4PJK87
DCMC25H3PJK87
DCMC27H2PJK87
Part Number
With Screw Locks
Without Boardlocks
DEMD5H1PJK87
DAMD7H2PJK87
DAMD11H1PJK87
DAMD3H3PJK87
DAMD3HK3PJK87TM
DBMD5H5PJK87
DBMD9H4PJK87
DBMD13H3PJK87
DBMD17H2PJK87
DBMD21H1PJK87
DCMD8H8PJK87
DCMD13H6PJK87
DCMD17H5PJK87
DCMD21HA4PJK87
DCMD25H3PJK87
DCMD27H2PJK87
Part Number
With Screw Locks
With Boardlocks
DEMG5H1PJK87
DAMG7H2PJK87
DAMG11H1PJK87
DAMG3H3PJK87
DAMG3HK3PJK87TM
DBMG5H5PJK87
DBMG9H4PJK87
DBMG13H3PJK87
DBMG17H2PJK87
DBMG21H1PJK87
DCMG8H8PJK87
DCMG13H6PJK87
DCMG17H5PJK87
DCMG21HA4PJK87
DCMG25H3PJK87
DCMG27H2PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5H1PJK127
For DD shell sizes, see page 62.
ឮ Keyed.
Engaging Face
3,89 (.153)
MIN.
A
C
B
20,57 ± 0,38
(.810 ±.015)
E
D
L
BOARDLOCK
10°
Ø 0,76
(.030)
Ø 3,18
(.125)
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
BRACKET,
METAL
12,34
(.486) 8,64
(.340)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
60
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Sizes DE-DC)
Receptacle
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 247-248.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Part Number
Without Screw Locks
Layout
Without Boardlocks
5W1
DEMP5H1SJA197
7W2
DAMP7H2SJA197
11W1
DAMP11H1SJA197
3W3
DAMP3H3SJA197
3WK3ឮ DAMP3HK3SJA197TM
5W5
DBMP5H5SJA197
9W4
DBMP9H4SJA197
13W3
DBMP13H3SJA197
17W2
DBMP17H2SJA197
21W1
DBMP21H1SJA197
8W8
DCMP8H8SJA197
13W6
DCMP13H6SJA197
17W5
DCMP17H5SJA197
21WA4
DCMP21HA4SJA197
25W3
DCMP25H3SJA197
27W2
DCMP27H2SJA197
Part Number
Without Screw Locks
With Boardlocks
DEMC5H1SJA197
DAMC7H2SJA197
DAMC11H1SJA197
DAMC3H3SJA197
DAMC3HK3SJA197TM
DBMC5H5SJA197
DBMC9H4SJA197
DBMC13H3SJA197
DBMC17H2SJA197
DBMC21H1SJA197
DCMC8H8SJA197
DCMC13H6SJA197
DCMC17H5SJA197
DCMC21HA4SJA197
DCMC25H3SJA197
DCMC27H2SJA197
Part Number
With Screw Locks
Without Boardlocks
DEMD5H1SJA197
DAMD7H2SJA197
DAMD11H1SJA197
DAMD3H3SJA197
DAMD3HK3SJA197TM
DBMD5H5SJA197
DBMD9H4SJA197
DBMD13H3SJA197
DBMD17H2SJA197
DBMD21H1SJA197
DCMD8H8SJA197
DCMD13H6SJA197
DCMD17H5SJA197
DCMD21HA4SJA197
DCMD25H3SJA197
DCMD27H2SJA197
Part Number
With Screw Locks
With Boardlocks
DEMG5H1SJA197
DAMG7H2SJA197
DAMG11H1SJA197
DAMG3H3SJA197
DAMG3HK3SJA197TM
DBMG5H5SJA197
DBMG9H4SJA197
DBMG13H3SJA197
DBMG17H2SJA197
DBMG21H1SJA197
DCMG8H8SJA197
DCMG13H6SJA197
DCMG17H5SJA197
DCMG21HA4SJA197
DCMG25H3SJA197
DCMG27H2SJA197
Note: For contacts with 30 microinches of gold substitute K126 for A197. Example: DEMP5H1SJK126
For DD shell sizes, see page 63.
ឮ Keyed.
3,89 (.153)
MIN.
Engaging Face
20,57 ± 0,38
(.810 ± .015)
L
Screw lock, boardlock, and signal contacts
removed for clarity
2,92
(.115)
Ø 0,76
(.030)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
BRACKET,
METAL
12,34
(.486)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
8,64
(.340)
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
61
Combo D
D Subminiature
40 A High Power 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Size DD)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMP24H7PJK87
DDMP36H4PJK87
DDMP43H2PJK87
DDMP47H1PJK87
Part Number
Without Screw Locks
With Boardlocks
DDMC24H7PJK87
DDMC36H4PJK87
DDMC43H2PJK87
DDMC47H1PJK87
Part Number
With Screw Locks
Without Boardlocks
DDMD24H7PJK87
DDMD36H4PJK87
DDMD43H2PJK87
DDMD47H1PJK87
Part Number
With Screw Locks
With Boardlocks
DDMG24H7PJK87
DDMG36H4PJK87
DDMG43H2PJK87
DDMG47H1PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24H7PJK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 246.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Engaging Face
A
3,89 (.153)
MIN
C
B
20,57 ± 0,38
(.810 ± .015)
D
E
L
2,92
(.115)
BOARDLOCK
10°
Ø 3.18
(.125)
Screw lock, boardlock, and signal contacts
removed for clarity
Ø 0,76
(.030)
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
5,68
(.224)
BRACKET,
METAL
13,74
(.541)
RIVNUT
#4-40 UNC
10,06
(.396)
11,53 ± 0,25
(.454 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
62
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power 90° — Standard Footprint .489ɍ or .454 inchɍɍ (Size DD)
Receptacle
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMP24H7SJA197
DDMP36H4SJA197
DDMP43H2SJA197
DDMP47H1SJA197
Part Number
Without Screw Locks
With Boardlocks
DDMC24H7SJA197
DDMC36H4SJA197
DDMC43H2SJA197
DDMC47H1SJA197
Part Number
With Screw Locks
Without Boardlocks
DDMD24H7SJA197
DDMD36H4SJA197
DDMD43H2SJA197
DDMD47H1SJA197
Part Number
With Screw Locks
With Boardlocks
DDMG24H7SJA197
DDMG36H4SJA197
DDMG43H2SJA197
DDMG47H1SJA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24H7SJK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 249.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Engaging Face
A
3,89 (.153)
MIN
C
B
20,57 ± 0,38
(.810 ± .015)
E
D
L
10°
BOARDLOCK
Ø 3,18
(.125)
Ø 0,76
(.030)
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
2,84
(.112)
BRACKET,
METAL
RIVNUT
#4-40 UNC
13,74
(.541) 10,06
(.396)
4,33 ± 0,38
(.170 ± .015)
5,68
(.224)
11,53 ± 0,25
(.454 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
63
Combo D
D Subminiature
40 A High Power 90° — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DC)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 250-251.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Part Number
Without Screw Locks
Layout
Without Boardlocks
5W1
DEMP5P1PVK87
7W2
DAMP7P2PVK87
11W1
DAMP11P1PVK87
3W3
DAMP3P3PVK87
3WK3ឮ DAMP3PK3PVK87TM
5W5
DBMP5P5PVK87
9W4
DBMP9P4PVK87
13W3
DBMP13P3PVK87
17W2
DBMP17P2PVK87
21W1
DBMP21P1PVK87
8W8
DCMP8P8PVK87
13W6
DCMP13P6PVK87
17W5
DCMP17P5PVK87
21WA4
DCMP21PA4PVK87
25W3
DCMP25P3PVK87
27W2
DCMP27P2PVK87
Part Number
Without Screw Locks
With Boardlocks
DEMC5P1PVK87
DAMC7P2PVK87
DAMC11P1PVK87
DAMC3P3PVK87
DAMC3PK3PVK87TM
DBMC5P5PVK87
DBMC9P4PVK87
DBMC13P3PVK87
DBMC17P2PVK87
DBMC21P1PVK87
DCMC8P8PVK87
DCMC13P6PVK87
DCMC17P5PVK87
DCMC21PA4PVK87
DCMC25P3PVK87
DCMC27P2PVK87
Part Number
With Screw Locks
Without Boardlocks
DEMD5P1PVK87
DAMD7P2PVK87
DAMD11P1PVK87
DAMD3P3PVK87
DAMD3PK3PVK87TM
DBMD5P5PVK87
DBMD9P4PVK87
DBMD13P3PVK87
DBMD17P2PVK87
DBMD21P1PVK87
DCMD8P8PVK87
DCMD13P6PVK87
DCMD17P5PVK87
DCMD21PA4PVK87
DCMD25P3PVK87
DCMD27P2PVK87
Part Number
With Screw Locks
With Boardlocks
DEMG5P1PVK87
DAMG7P2PVK87
DAMG11P1PVK87
DAMG3P3PVK87
DAMG3PK3PVK87TM
DBMG5P5PVK87
DBMG9P4PVK87
DBMG13P3PVK87
DBMG17P2PVK87
DBMG21P1PVK87
DCMG8P8PVK87
DCMG13P6PVK87
DCMG17P5PVK87
DCMG21PA4PVK87
DCMG25P3PVK87
DCMG27P2PVK87
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: For tin plated PC tails add A226 (signal contacts only). Example DEMP5P1PVK87A226
For performance class 2 substitute K127 for K87. Example: DEMP5P1PVK127
ឮ Keyed.
Engaging Face
3,30 (.130)
MIN.
A
C
B
11,94 ± 0,25
(.470 ± .010)
E
D
L
1,00 (.039)
Screw lock, boardlock, and signal contacts
removed for clarity
2,92
(.115)
BOARDLOCK
Ø 0,60
(.024)
Ø 2,90
(.114)
BRACKET,
METAL
14,55
(.573)
RIVNUT
#4-40 UNC
10,85
(.427)
4,00 (.157)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
64
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power 90° — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DC)
Receptacle
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 252-253.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Part Number
Without Screw Locks
Layout
Without Boardlocks
5W1
DEMP5P1SVA197
7W2
DAMP7P2SVA197
11W1
DAMP11P1SVA197
3W3
DAMP3P3SVA197
3WK3ឮ DAMP3PK3SVA197TM
5W5
DBMP5P5SVA197
9W4
DBMP9P4SVA197
13W3
DBMP13P3SVA197
17W2
DBMP17P2SVA197
21W1
DBMP21P1SVA197
8W8
DCMP8P8SVA197
13W6
DCMP13P6SVA197
17W5
DCMP17P5SVA197
21WA4
DCMP21PA4SVA197
25W3
DCMP25P3SVA197
27W2
DCMP27P2SVA197
Part Number
Without Screw Locks
With Boardlocks
DEMC5P1SVA197
DAMC7P2SVA197
DAMC11P1SVA197
DAMC3P3SVA197
DAMC3PK3SVA197TM
DBMC5P5SVA197
DBMC9P4SVA197
DBMC13P3SVA197
DBMC17P2SVA197
DBMC21P1SVA197
DCMC8P8SVA197
DCMC13P6SVA197
DCMC17P5SVA197
DCMC21PA4SVA197
DCMC25P3SVA197
DCMC27P2SVA197
Part Number
With Screw Locks
Without Boardlocks
DEMD5P1SVA197
DAMD7P2SVA197
DAMD11P1SVA197
DAMD3P3SVA197
DAMD3PK3SVA197TM
DBMD5P5SVA197
DBMD9P4SVA197
DBMD13P3SVA197
DBMD17P2SVA197
DBMD21P1SVA197
DCMD8P8SVA197
DCMD13P6SVA197
DCMD17P5SVA197
DCMD21PA4SVA197
DCMD25P3SVA197
DCMD27P2SVA197
Part Number
With Screw Locks
With Boardlocks
DEMG5P1SVA197
DAMG7P2SVA197
DAMG11P1SVA197
DAMG3P3SVA197
DAMG3PK3SVA197TM
DBMG5P5SVA197
DBMG9P4SVA197
DBMG13P3SVA197
DBMG17P2SVA197
DBMG21P1SVA197
DCMG8P8SVA197
DCMG13P6SVA197
DCMG17P5SVA197
DCMG21PA4SVA197
DCMG25P3SVA197
DCMG27P2SVA197
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: For performance class 2 substitute K126 for A197. Example: DEMP5P1SVK126
ឮ Keyed.
Engaging Face
3,30 (.130)
MIN.
A
C
B
11,94 ± 0,25
(.470 ± .010)
E
D
L
1,00 (.039)
Screw lock, boardlock, and signal contacts
removed for clarity
2,92
(.115)
BOARDLOCK
Ø 0,60
(.024)
Ø 2,90
(.114)
2,54
(.100)
BRACKET,
METAL
14,55
(.573)
RIVNUT
#4-40 UNC
10,85
(.427)
4,00 (.157)
9,40 ± 0,20
(.370 ± .008)
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0.76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
65
Combo D
D Subminiature
40 A High Power Straight — Standard PC Tails (Sizes DE-DC)
Plug
Part Numbers with Standoff #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 254-255.
ɀ For panel cutouts, see page 221.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMV5H1PNK87
DAMV7H2PNK87
DAMV11H1PNK87
DAMV3H3PNK87
DAMV3HK3PNK87TM
DBMV5H5PNK87
DBMV9H4PNK87
DBMV13H3PNK87
DBMV17H2PNK87
DBMV21H1PNK87
DCMV8H8PNK87
DCMV13H6PNK87
DCMV17H5PNK87
DCMV21HA4PNK87
DCMV25H3PNK87
DCMV27H2PNK87
Part Number
Without Screw Locks
With Boardlocks
DEMZ5H1PNK87
DAMZ7H2PNK87
DAMZ11H1PNK87
DAMZ3H3PNK87
DAMZ3HK3PNK87TM
DBMZ5H5PNK87
DBMZ9H4PNK87
DBMZ13H3PNK87
DBMZ17H2PNK87
DBMZ21H1PNK87
DCMZ8H8PNK87
DCMZ13H6PNK87
DCMZ17H5PNK87
DCMZ21HA4PNK87
DCMZ25H3PNK87
DCMZ27H2PNK87
Part Number
With Screw Locks
With Boardlocks
DEMN5H1PNK87
DAMN7H2PNK87
DAMN11H1PNK87
DAMN3H3PNK87
DAMN3HK3PNK87TM
DBMN5H5PNK87
DBMN9H4PNK87
DBMN13H3PNK87
DBMN17H2PNK87
DBMN21H1PNK87
DCMN8H8PNK87
DCMN13H6PNK87
DCMN17H5PNK87
DCMN21HA4PNK87
DCMN25H3PNK87
DCMN27H2PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMV5H1PNK127
For DD shell sizes, see page 68.
ឮ Keyed.
Engaging Face
A
C
B
D
E
10°
Ø 3,18
(.125)
BOARDLOCK
4,65
(.183)
Ø 0,76
(.030)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
L
SCREW LOCK
#4-40 UNC
W
F
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
66
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power Straight — Standard PC Tails (Sizes DE-DC)
Receptacle
Part Numbers with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 257-258.
ɀ For panel cutouts, see page 221.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMV5H1SNA197
DAMV7H2SNA197
DAMV11H1SNA197
DAMV3H3SNA197
DAMV3HK3SNA197TM
DBMV5H5SNA197
DBMV9H4SNA197
DBMV13H3SNA197
DBMV17H2SNA197
DBMV21H1SNA197
DCMV8H8SNA197
DCMV13H6SNA197
DCMV17H5SNA197
DCMV21HA4SNA197
DCMV25H3SNA197
DCMV27H2SNA197
Part Number
Without Screw Locks
With Boardlocks
DEMZ5H1SNA197
DAMZ7H2SNA197
DAMZ11H1SNA197
DAMZ3H3SNA197
DAMZ3HK3SNA197TM
DBMZ5H5SNA197
DBMZ9H4SNA197
DBMZ13H3SNA197
DBMZ17H2SNA197
DBMZ21H1SNA197
DCMZ8H8SNA197
DCMZ13H6SNA197
DCMZ17H5SNA197
DCMZ21HA4SNA197
DCMZ25H3SNA197
DCMZ27H2SNA197
Part Number
With Screw Locks
With Boardlocks
DEMN5H1SNA197
DAMN7H2SNA197
DAMN11H1SNA197
DAMN3H3SNA197
DAMN3HK3SNA197TM
DBMN5H5SNA197
DBMN9H4SNA197
DBMN13H3SNA197
DBMN17H2SNA197
DBMN21H1SNA197
DCMN8H8SNA197
DCMN13H6SNA197
DCMN17H5SNA197
DCMN21HA4SNA197
DCMN25H3SNA197
DCMN27H2SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMV5H1SNK126
For DD shell sizes, see page 69.
ឮ Keyed.
Engaging Face
A
C
B
D
E
10°
BOARDLOCK
Ø 0,76
(.030)
Ø 3,18
(.125)
4,65
(.183)
4,52 (.178)
2,84
(.112)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
L
SCREW LOCK
#4-40 UNC
W
F
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
67
Combo D
D Subminiature
40 A High Power Straight — Standard PC Tails (Size DD)
Plug
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24H7PNK87
DDMV36H4PNK87
DDMV43H2PNK87
DDMV47H1PNK87
Part Number
Without Screw Locks
With Boardlocks
DDMZ24H7PNK87
DDMZ36H4PNK87
DDMZ43H2PNK87
DDMZ47H1PNK87
Part Number
With Screw Locks
With Boardlocks
DDMN24H7PNK87
DDMN36H4PNK87
DDMN43H2PNK87
DDMN47H1PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMV24H7PNK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 256.
ɀ For panel cutouts, see page 221.
Engaging Face
A
C
B
D
E
10°
Ø 3,18
(.125)
BOARDLOCK
4,65
(.183)
5,69
(.224)
Ø 0,76
(.030)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
L
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size
DD
68
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power Straight — Standard PC Tails (Size DD)
Receptacle
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24H7SNA197
DDMV36H4SNA197
DDMV43H2SNA197
DDMV47H1SNA197
Part Number
Without Screw Locks
With Boardlocks
DDMZ24H7SNA197
DDMZ36H4SNA197
DDMZ43H2SNA197
DDMZ47H1SNA197
Part Number
With Screw Locks
With Boardlocks
DDMN24H7SNA197
DDMN36H4SNA197
DDMN43H2SNA197
DDMN47H1SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMV24H7SNK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 259.
ɀ For panel cutouts, see page 221.
Engaging Face
A
C
B
D
E
10°
Ø 0,76
(.030)
BOARDLOCK
5,69
(.224)
Ø 3,18
(.125)
4,65
(.183)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
L
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
69
Combo D
D Subminiature
40 A High Power Straight — European PC Tails (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Plug
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 254-255.
ɀ For panel cutouts, see page 221.
Part Number
Without Screw Locks
Without Boardlocks
DEMV5H1PYK87
DAMV7H2PYK87
DAMV11H1PYK87
DAMV3H3PYK87
DAMV3HK3PYK87TM
DBMV5H5PYK87
DBMV9H4PYK87
DBMV13H3PYK87
DBMV17H2PYK87
DBMV21H1PYK87
DCMV8H8PYK87
DCMV13H6PYK87
DCMV17H5PYK87
DCMV21HA4PYK87
DCMV25H3PYK87
DCMV27H2PYK87
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
With Boardlocks
DEMZ5H1PYK87
DAMZ7H2PYK87
DAMZ11H1PYK87
DAMZ3H3PYK87
DAMZ3HK3PYK87TM
DBMZ5H5PYK87
DBMZ9H4PYK87
DBMZ13H3PYK87
DBMZ17H2PYK87
DBMZ21H1PYK87
DCMZ8H8PYK87
DCMZ13H6PYK87
DCMZ17H5PYK87
DCMZ21HA4PYK87
DCMZ25H3PYK87
DCMZ27H2PYK87
Part Number
With Screw Locks
With Boardlocks
DEMN5H1PYK87
DAMN7H2PYK87
DAMN11H1PYK87
DAMN3H3PYK87
DAMN3HK3PYK87TM
DBMN5H5PYK87
DBMN9H4PYK87
DBMN13H3PYK87
DBMN17H2PYK87
DBMN21H1PYK87
DCMN8H8PYK87
DCMN13H6PYK87
DCMN17H5PYK87
DCMN21HA4PYK87
DCMN25H3PYK87
DCMN27H2PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For tin plated PC tails add A226 (signal contacts only). Example: DEMV5H1PYK87A226
For performance class 2 substitute K127 for K87. Example: DEMV5H1PYK127
For DD shell sizes, see page 72.
ឮ Keyed.
Engaging Face
A
C
B
D
E
10°
BOARDLOCK
Ø 3,18
(.125)
Ø 0,60
(.024)
4,65
(.183)
4,52 (.178)
7.62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
L
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
70
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power Straight — European PC Tails (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Receptacle
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 257-258.
ɀ For panel cutouts, see page 221.
Part Number
Without Screw Locks
Without Boardlocks
DEMV5H1SYA197
DAMV7H2SYA197
DAMV11H1SYA197
DAMV3H3SYA197
DAMV3HK3SYA197TM
DBMV5H5SYA197
DBMV9H4SYA197
DBMV13H3SYA197
DBMV17H2SYA197
DBMV21H1SYA197
DCMV8H8SYA197
DCMV13H6SYA197
DCMV17H5SYA197
DCMV21HA4SYA197
DCMV25H3SYA197
DCMV27H2SYA197
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
With Boardlocks
DEMZ5H1SYA197
DAMZ7H2SYA197
DAMZ11H1SYA197
DAMZ3H3SYA197
DAMZ3HK3SYA197TM
DBMZ5H5SYA197
DBMZ9H4SYA197
DBMZ13H3SYA197
DBMZ17H2SYA197
DBMZ21H1SYA197
DCMZ8H8SYA197
DCMZ13H6SYA197
DCMZ17H5SYA197
DCMZ21HA4SYA197
DCMZ25H3SYA197
DCMZ27H2SYA197
Part Number
With Screw Locks
With Boardlocks
DEMN5H1SYA197
DAMN7H2SYA197
DAMN11H1SYA197
DAMN3H3SYA197
DAMN3HK3SYA197TM
DBMN5H5SYA197
DBMN9H4SYA197
DBMN13H3SYA197
DBMN17H2SYA197
DBMN21H1SYA197
DCMN8H8SYA197
DCMN13H6SYA197
DCMN17H5SYA197
DCMN21HA4SYA197
DCMN25H3SYA197
DCMN27H2SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For performance class 2 substitute K126 for A197. Example: DEMV5H1SYK126
For DD shell sizes, see page 73.
ឮ Keyed.
Engaging Face
A
C
B
E
D
10°
BOARDLOCK
4,65
(.183)
Ø 3,18
(.125)
Ø 0,60
(.024)
2,84
(.112)
4,52 (.178)
2,92
(.115)
7,62 ± 0,25
(.300 ± .010)
STANDOFF
#4-40 UNC
F
L
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
W
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
71
Combo D
D Subminiature
40 A High Power Straight — European PC Tails (Size DD)
Part Numbers with Standoff #4-40 UNC
Plug
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24H7PYK87
DDMV36H4PYK87
DDMV43H2PYK87
DDMV47H1PYK87
Part Number
Without Screw Locks
With Boardlocks
DDMZ24H7PYK87
DDMZ36H4PYK87
DDMZ43H2PYK87
DDMZ47H1PYK87
Part Number
With Screw Locks
With Boardlocks
DDMN24H7PYK87
DDMN36H4PYK87
DDMN43H2PYK87
DDMN47H1PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For tin plated PC tails add A226 (signal contacts only). Example DDMV24H7PYK87A226
For performance class 2 substitute K127 for K87. Example: DDMV24H7PYK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 256.
ɀ For panel cutouts, see page 221.
Engaging Face
A
C
B
E
D
BOARDLOCK
Ø 3,18
(.125)
5,69
(.224)
Ø 0,60
(.024)
2,84
(.112)
4,52 (.178)
4,65
(.183)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
F
W
L
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power
contact removed for clarity
Dimensions
Shell Size
DD
72
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
40 A High Power Straight — European PC Tails (Size DD)
Receptacle
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMV24H7SYA197
DDMV36H4SYA197
DDMV43H2SYA197
DDMV47H1SYA197
Part Number
Without Screw Locks
With Boardlocks
DDMZ24H7SYA197
DDMZ36H4SYA197
DDMZ43H2SYA197
DDMZ47H1SYA197
Part Number
With Screw Locks
With Boardlocks
DDMN24H7SYA197
DDMN36H4SYA197
DDMN43H2SYA197
DDMN47H1SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Note: For performance class 2 substitute K126 for A197. Example: DDMV24H7SYK126
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 259.
ɀ For panel cutouts, see page 221.
Engaging Face
A
C
B
E
D
BOARDLOCK
4,65
(.183)
Ø 3,18
(.125)
Ø 0,60
(.024)
7,62 ± 0,25
(.300 ± .010)
5,69
(.224)
2,84
(.112)
4,52 (.178)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
L
Screw lock, boardlock, and high power
contact removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
73
Combo D
D Subminiature
90° PC Tail — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DD)
Plug
Part Numbers
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 260-262.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Part Number
Without Hardware
DEM-5W1P-1A0N-K87
DAM-7W2P-1A0N-K87
DAM-11W1P-1A0N-K87
DAM-3W3P-1A0N-K87
DAM-3WK3P-1A0N-K87
DBM-5W5P-1A0N-K87
DBM-9W4P-1A0N-K87
DBM-13W3P-1A0N-K87
DBM-17W2P-1A0N-K87
DBM-21W1P-1A0N-K87
DCM-8W8P-1A0N-K87
DCM-13W6P-1A0N-K87
DCM-17W5P-1A0N-K87
DCM-21WA4P-1A0N-K87
DCM-25W3P-1A0N-K87
DCM-27W2P-1A0N-K87
DDM-24W7P-1A0N-K87
DDM-36W4P-1A0N-K87
DDM-43W2P-1A0N-K87
DDM-47W1P-1A0N-K87
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Part Number
Metal Bracket With #4-40 Nut
DEM-5W1P-1A7N-K87
DAM-7W2P-1A7N-K87
DAM-11W1P-1A7N-K87
DAM-3W3P-1A7N-K87
DAM-3WK3P-1A7N-K87
DBM-5W5P-1A7N-K87
DBM-9W4P-1A7N-K87
DBM-13W3P-1A7N-K87
DBM-17W2P-1A7N-K87
DBM-21W1P-1A7N-K87
DCM-8W8P-1A7N-K87
DCM-13W6P-1A7N-K87
DCM-17W5P-1A7N-K87
DCM-21WA4P-1A7N-K87
DCM-25W3P-1A7N-K87
DCM-27W2P-1A7N-K87
DDM-24W7P-1A7N-K87
DDM-36W4P-1A7N-K87
DDM-43W2P-1A7N-K87
DDM-47W1P-1A7N-K87
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-1A0N-A191-K87
ឮ Keyed.
DD Configuration
2,54
(.100)
Engaging Face
5,08
(.200)
A
5,00
(.197)
C
B
Ø 3,05
(.120)
9,40 ± 0,20
(.370 ± .008)
K
D
E
L
10°
Ø 0,60
(.024)
2,54
(.100)
5,00
(.197)
9,40 ± 0,20
(.370 ± .008)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
74
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
90° PC Tail — European Footprint 10,2ɍ or 9,4 mmɍɍ (Sizes DE-DD)
Receptacle
Part Numbers
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 263-265.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Part Number
Without Hardware
DEM-5W1S-1A0N-A197
DAM-7W2S-1A0N-A197
DAM-11W1S-1A0N-A197
DAM-3W3S-1A0N-A197
DAM-3WK3S-1A0N-A197
DBM-5W5S-1A0N-A197
DBM-9W4S-1A0N-A197
DBM-13W3S-1A0N-A197
DBM-17W2S-1A0N-A197
DBM-21W1S-1A0N-A197
DCM-8W8S-1A0N-A197
DCM-13W6S-1A0N-A197
DCM-17W5S-1A0N-A197
DCM-21WA4S-1A0N-A197
DCM-25W3S-1A0N-A197
DCM-27W2S-1A0N-A197
DDM-24W7S-1A0N-A197
DDM-36W4S-1A0N-A197
DDM-43W2S-1A0N-A197
DDM-47W1S-1A0N-A197
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Part Number
Metal Bracket With #4-40 Nut
DEM-5W1S-1A7N-A197
DAM-7W2S-1A7N-A197
DAM-11W1S-1A7N-A197
DAM-3W3S-1A7N-A197
DAM-3WK3S-1A7N-A197
DBM-5W5S-1A7N-A197
DBM-9W4S-1A7N-A197
DBM-13W3S-1A7N-A197
DBM-17W2S-1A7N-A197
DBM-21W1S-1A7N-A197
DCM-8W8S-1A7N-A197
DCM-13W6S-1A7N-A197
DCM-17W5S-1A7N-A197
DCM-21WA4S-1A7N-A197
DCM-25W3S-1A7N-A197
DCM-27W2S-1A7N-A197
DDM-24W7S-1A7N-A197
DDM-36W4S-1A7N-A197
DDM-43W2S-1A7N-A197
DDM-47W1S-1A7N-A197
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-1A0N-A191-A197
ឮ Keyed.
Engaging Face
DD Configuration
2,54
(.100)
A
C
Ø 3,05
(.120)
B
D
E
5,00
(.197)
5,08
(.200)
9,40 ± 0,20
(.370 ± .008)
K
L
10°
Ø 0,60
(.024)
2,54
(.100)
5,00
(.197)
9,40 ± 0,20
(.370 ± .008)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
75
Combo D
D Subminiature
Straight PC Tails — European (Sizes DE-DD)
Plug
Part Numbers
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 266-268.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Part Number
X
4,60 (.181)
DEM-5W1P-OL2-K87
DAM-7W2P-OL2-K87
DAM-11W1P-OL2-K87
DAM-3W3P-OL2-K87
DAM-3WK3P-OL2-K87
DBM-5W5P-OL2-K87
DBM-9W4P-OL2-K87
DBM-13W3P-OL2-K87
DBM-17W2P-OL2-K87
DBM-21W1P-OL2-K87
DCM-8W8P-OL2-K87
DCM-13W6P-OL2-K87
DCM-17W5P-OL2-K87
DCM-21WA4P-OL2-K87
DCM-25W3P-OL2-K87
DCM-27W2P-OL2-K87
DDM-24W7P-OL2-K87
DDM-36W4P-OL2-K87
DDM-43W2P-OL2-K87
DDM-47W1P-OL2-K87
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Part Number
X
6,05 (.238)
DEM-5W1P-OL4-K87
DAM-7W2P-OL4-K87
DAM-11W1P-OL4-K87
DAM-3W3P-OL4-K87
DAM-3WK3P-OL4-K87
DBM-5W5P-OL4-K87
DBM-9W4P-OL4-K87
DBM-13W3P-OL4-K87
DBM-17W2P-OL4-K87
DBM-21W1P-OL4-K87
DCM-8W8P-OL4-K87
DCM-13W6P-OL4-K87
DCM-17W5P-OL4-K87
DCM-21WA4P-OL4-K87
DCM-25W3P-OL4-K87
DCM-27W2P-OL4-K87
DDM-24W7P-OL4-K87
DDM-36W4P-OL4-K87
DDM-43W2P-OL4-K87
DDM-47W1P-OL4-K87
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-OL2-A191-K87
ឮ Keyed.
DD Configuration
5,69
(.224)
Engaging Face
2,84
(.112)
A
C
Ø 3,05
(.120)
B
K
D
E
L
10°
Ø 0,60
(.024)
2,84
(.112)
X
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
76
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Straight PC Tails — European (Sizes DE-DD)
Receptacle
Part Numbers
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 269-271.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Part Number
X
4.60 (.181)
DEM-5W1S-OL2-A197
DAM-7W2S-OL2-A197
DAM-11W1S-OL2-A197
DAM-3W3S-OL2-A197
DAM-3WK3S-OL2-A197
DBM-5W5S-OL2-A197
DBM-9W4S-OL2-A197
DBM-13W3S-OL2-A197
DBM-17W2S-OL2-A197
DBM-21W1S-OL2-A197
DCM-8W8S-OL2-A197
DCM-13W6S-OL2-A197
DCM-17W5S-OL2-A197
DCM-21WA4S-OL2-A197
DCM-25W3S-OL2-A197
DCM-27W2S-OL2-A197
DDM-24W7S-OL2-A197
DDM-36W4S-OL2-A197
DDM-43W2S-OL2-A197
DDM-47W1S-OL2-A197
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Part Number
X
6.05 (.238)
DEM-5W1S-OL4-A197
DAM-7W2S-OL4-A197
DAM-11W1S-OL4-A197
DAM-3W3S-OL4-A197
DAM-3WK3S-OL4-A197
DBM-5W5S-OL4-A197
DBM-9W4S-OL4-A197
DBM-13W3S-OL4-A197
DBM-17W2S-OL4-A197
DBM-21W1S-OL4-A197
DCM-8W8S-OL4-A197
DCM-13W6S-OL4-A197
DCM-17W5S-OL4-A197
DCM-21WA4S-OL4-A197
DCM-25W3S-OL4-A197
DCM-27W2S-OL4-A197
DDM-24W7S-OL4-A197
DDM-36W4S-OL4-A197
DDM-43W2S-OL4-A197
DDM-47W1S-OL4-A197
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-OL2-A191-A197
ឮ Keyed.
DD Configuration
5,69
(.224)
Engaging Face
2,84
(.112)
A
C
Ø 3,05
(.120)
B
K
D
E
L
10°
2,84
(.112)
Ø 0,60
(.024)
X
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
77
Combo D
D Subminiature
Solder Cup (Sizes DE-DD)
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Through Hole
DEM5W1PK87
DAM7W2PK87
DAM11W1PK87
DAM3W3PK87
DAM3WK3PK87
DBMP5W5PK87
DBM9W4PK87
DBM13W3PK87
DBM17W2PK87
DBM21W1PK87
DCM8W8PK87
DCM13W6PK87
DCM17W5PK87
DCM21WA4PK87
DCM25W3PK87
DCM27W2PK87
DDM24W7PK87
DDM36W4PK87
DDM43W2PK87
DDM47W1PK87
Dual
Float Mount
DEMY5W1PK87
DAMY7W2PK87
DAMY11W1PK87
DAMY3W3PK87
DAMY3WK3PK87
DBMY5W5PK87
DBMY9W4PK87
DBMY13W3PK87
DBMY17W2PK87
DBMY21W1PK87
DCMY8W8PK87
DCMY13W6PK87
DCMY17W5PK87
DCMY21WA4PK87
DCMY25W3PK87
DCMY27W2PK87
DDMY24W7PK87
DDMY36W4PK87
DDMY43W2PK87
DDMY47W1PK87
Clinch Nut
#4-40 UNC
DEME5W1PK87
DAME7W2PK87
DAME11W1PK87
DAME3W3PK87
DAME3WK3PK87
DBME5W5PK87
DBME9W4PK87
DBME13W3PK87
DBME17W2PK87
DBME21W1PK87
DCME8W8PK87
DCME13W6PK87
DCME17W5PK87
DCME21WA4PK87
DCME25W3PK87
DCME27W2PK87
DDME24W7PK87
DDME36W4PK87
DDME43W2PK87
DDME47W1PK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEM5W1PK127
For M3 clinch nuts substitute X for E. Example: DEMX5W1PK87
ឮ Keyed.
Engaging Face
DD Configuration
5,69
(.224)
A
C
2,84
(.112)
Ø 3,05
(.120)
B
K
D
E
L
10°
10,72 (.422)
MAX
2,84
(.112)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
78
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Solder Cup (Sizes DE-DD)
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Dual
Float Mount
DEMY5W1SA197
DAMY7W2SA197
DAMY11W1SA197
DAMY3W3SA197
DAMY3WK3SA197
DBMY5W5SA197
DBMY9W4SA197
DBMY13W3SA197
DBMY17W2SA197
DBMY21W1SA197
DCMY8W8SA197
DCMY13W6SA197
DCMY17W5SA197
DCMY21WA4SA197
DCMY25W3SA197
DCMY27W2SA197
DDMY24W7SA197
DDMY36W4SA197
DDMY43W2SA197
DDMY47W1SA197
Through Hole
DEM5W1SA197
DAM7W2SA197
DAM11W1SA197
DAM3W3SA197
DAM3WK3SA197
DBM5W5SA197
DBM9W4SA197
DBM13W3SA197
DBM17W2SA197
DBM21W1SA197
DCM8W8SA197
DCM13W6SA197
DCM17W5SA197
DCM21WA4SA197
DCM25W3SA197
DCM27W2SA197
DDM24W7SA197
DDM36W4SA197
DDM43W2SA197
DDM47W1SA197
Clinch Nut
#4-40 UNC
DEME5W1SA197
DAME7W2SA197
DAME11W1SA197
DAME3W3SA197
DAME3WK3SA197
DBME5W5SA197
DBME9W4SA197
DBME13W3SA197
DBME17W2SA197
DBME21W1SA197
DCME8W8SA197
DCME13W6SA197
DCME17W5SA197
DCME21WA4SA197
DCME25W3SA197
DCME27W2SA197
DDME24W7SA197
DDME36W4SA197
DDME43W2SA197
DDME47W1SA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEM5W1SK126
For M3 clinch nuts substitute X for E. Example: DEMX5W1SA197
ឮ Keyed.
DD Configuration
Engaging Face
5,69
(.224)
A
2,84
(.112)
C
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84 (.112)
9,91 (.390)
MAX
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.123)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
79
Combo D
D Subminiature
Crimp Cable Connectors without Contacts (Sizes DA-DD)
Part Numbers
Plug
Shell Size
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For panel cutouts, see page 221.
Layout
7W2
11W1
3W3
5W5
9W4
13W3
17W2
21W1
8W8
21WA4
25W3
24W7
36W4
Part Number
DAA7W2PK87F0
DAA11W1PK87F0
DAA3W3PK87F0
DBA5W5PK87F0
DBA9W4PK87F0
DBA13W3PK87F0
DBA17W2PK87F0
DBA21W1PK87F0
DCA8W8PK87F0
DCA21WA4PK87F0
DCA25W3PK87F0
DDA24W7PK87F0
DDA36W4PK87F0
Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275.
L
10,92 (.430)
MAX
K
Engaging Face
A
C
B
10°
D
E
Dimensions
Shell Size
DE
DA
DB
DC
DD
80
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Crimp Cable Connectors without Contacts (Sizes DA-DD)
Receptacle
Part Numbers
Shell Size
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For panel cutouts, see page 221.
Layout
7W2
11W1
3W3
5W5
9W4
13W3
17W2
21W1
8W8
21WA4
24W7
36W4
Part Number
DAA7W2SA197F0
DAA11W1SA197F0
DAA3W3SA197F0
DBA5W5SA197F0
DBA9W4SA197F0
DBA13W3SA197F0
DBA17W2SA197F0
DBA21W1SA197F0
DCA8W8SA197F0
DCA21WA4SA197F0
DDA24W7SA197F0
DDA36W4SA197F0
Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275.
L
10,92 (.430)
MAX
K
Engaging Face
A
C
B
10°
E
D
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,317 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
81
Combo D
D Subminiature
Shield Cans
X Cable
4,8 - 5,5
5,5 - 6,2
6,2 - 7,2
7,2 - 8,2
8,2 - 9,5
9,5 - 11,1
Ferrule
XA
6,25 (.246)
6,25 (.246)
8,20 (.323)
8,20 (.323)
11,50 (.452)
11,50 (.452)
Ferrule
Part Number
304-8810-000
304-8810-000
304-8811-000
304-8811-000
304-8812-000
304-8813-000
Crimp Tool
Position
B
A
B
A
B
A
Materials and Finishes
Part Numbers
Top Can (B size):
Bottom Can (B size):
Crimp Tool
Part Number
D115433-1
D115433-1
D115433-2
D115433-2
D115433-3
D115433-3
348-8946-000
348-8945-000
Note: For other available can sizes, consult factory for details.
Shield Can and Ferrule
Material:
Steel
Finish:
Tin
ɀ Order 1 top can, 1 bottom can, 1 ferrule per
connector.
FERRULE
CABLE
Ø 10,00 (.394)
10,10 (.398)
Ferrule
Wire Trim Dimensions
Crimp Tool Positions
11,25(.443)
Ø 11,10(.437)
ØA
10,00(.394)
50,00 (1.969)
82
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Crimp (Size 20) Contacts
Loose Contacts
Stamped contacts with insulation support are
supplied loose for use with hand crimp tooling.
Two sizes are available to accommodate wire
ranges 20 - 26 AWG.
Pin Contact
Socket Contact
Part Number
Pin Contact
Finish
30Ȗ inches Gold over Nickel
24-26 AWG
030-2487-017
Part Number
Socket Contact
20-24 AWG
030-2487-016
24-26 AWG
030-2488-017
20-24 AWG
030-2488-016
For tooling, see this page.
Reeled Contacts (5,000 Pieces per Reel)
Stamped contacts with insulation support are
supplied on reels of 5,000 for use with semiautomatic strip and crimp machines. Two sizes are
available to accommodate wire ranges 20 - 26
AWG.
Pin Contacts
Socket Contacts
Part Number
Pin Contact
Finish
Gold over Nickel
30Ȗ inches Gold over Nickel
24-26 AWG
980-2000-925
980-2000-946
Part Number
Socket Contact
20-24 AWG
980-2000-924
980-2000-945
24-26 AWG
980-2000-926
980-2000-944
20-24 AWG
980-2000-923
980-2000-943
For semi-automatic tooling, see page 275.
Pin Contacts
Socket Contacts
Tooling
CCT-D*A-1
Hand Crimp Tool
Description
CCT-D*A-1
Part Number
995-2000-000
Extraction Tool
Description
CIET-D*A-20-24
CIET-D*A-24-26
Part Number
980-0008-135
980-0008-136
Wire Size
20-24 AWG
24-26 AWG
For semi-automatic tooling, see page 275.
Dimensions are shown in mm (inch)
Dimensions subject to change
83
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — Coaxial 75 Ohm
Stamped Crimp/Crimp
Recommended Wire Trim Dimensions
Kit (Body, Ferrule, Center Contact)
Stamped Crimp/Crimp
Plug
Receptacle
Kit
Gold over Ni
D130322-2
D130344-1
Kit
30Ȗ in. Gold over Ni
D130322-1
D130344
Kit
50Ȗ in. Gold over Ni
D130322-6
D130344-2
RG Cable Number
179/U
179/U
Center Contact
Gold over Ni
10,000 Reel
110238-1015
110238-1014
Center Contact
30Ȗ in. Gold over Ni
10,000 Reel
110238-1012
110238-1013
Loose Components for High Volume (3 Pieces — Body, Ferrule, Center Contact)
Stamped Crimp/Crimp
Plug
Receptacle
Tooling for Stamped Crimp/Crimp
Body
249-2272-000
249-2271-000
Ferrule
304-0444-000
304-0444-000
Description
Stamped Center
Conductor
Stamped Outer
Conductor
Crimping Tool
Hand Crimp, ‘‘B’’ Crimp
Semi-Automatic Crimper
Hand Tool, Hex Crimp
Pneumatic Hex Crimp
Tool Number
CCTP-750HM
ABT-607 (Leased)
CCTP-DM
995-2000-094
For semi-automatic tooling, see page 275.
84
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — Coaxial 75 Ohm — 90°
90° Crimp Braid/Solder Center Contact
Plug
Receptacle
Part Number
Gold over Ni
D130357-1
D130356-1
17,30 (.680)
REF
Part Number
30Ȗ in. Gold over Ni
D130357
D130356
Part Number
50Ȗ in. Gold over Ni
D130357-4
D130356-3
17,53 (.690)
REF
0,16 (.006)
REF
Ø 4,79(.189)
REF
5,10 (.200)
REF
Plug
Note: Ferrule not shown.
Receptacle
Note: Ferrule not shown.
Tooling for 90° Crimp Braid
Description
Hand Tool:
Die Set:
Part Number
995-0001-761
995-2000-110
Dimensions are shown in mm (inch)
Dimensions subject to change
85
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — Straight
Straight Crimp Braid
Plug
Receptacle
Note: Dimensions include outer sleeve.
Plug
Plug
Part Number
Gold Over Nickel
DM53740
DM53740-1
Part Number
50Ȗ in.
Gold Over Copper
DM53740-17
DM53740-15
A
max.
18,80 (.739)
18,80 (.739)
B
max.
24,00 (.945)
24,00 (.945)
D
min.
1,00 (.040)
1,70 (.067)
Plug
Plug
Plug
Receptacle
Receptacle
DM53740-35
DM53740-3
DM53740-5
DM53742
DM53742-1
—
DM53740-16
DM53740-18
DM53742-18
DM53742-16
18,80 (.739)
21,50 (.847)
21,50 (.847)
18,80 (.739)
18,80 (.739)
24,00 (.945)
26,34 (1.037)
26,34 (1.037)
24,00 (.945)
24,00 (.945)
1,70 (.067)
2,79 (.110)
3,18 (.125)
1,00 (.040)
1,70 (.067)
Receptacle
Receptacle
Receptacle
DM53742-36
DM53742-3
DM53742-5
—
DM53742-17
DM53742-19
18,80 (.739)
21,50 (.847)
21,50 (.847)
24,00 (.945)
26,34 (1.037)
26,34 (1.037)
1,70 (.067)
2,79 (.110)
3,18 (.125)
RG Cable Number
Old
196/U
187/U
188/U
—
195/U
58/U
196/U
187/U
188/U
—
195/U
58/U
New
178B/U
179B/U
316B/U
RD316
180B/U
58B/U
178B/U
179B/U
316B/U
RD316
180B/U
58B/U
For crimp tooling, see page 89.
Straight Solder Braid
Plug
86
Receptacle
Plug
Plug
Part Number
Gold Over Nickel
DM53740-5008
DM53740-5001
Part Number
50Ȗ in.
Gold Over Copper
DM53740-5105
DM53740-5099
A
max.
18,80 (.739)
18,80 (.739)
B
max.
24,00 (.945)
24,00 (.945)
D
min.
1,00 (.040)
1,70 (.067)
Plug
Plug
Plug
Plug (Short Type)
Receptacle
Receptacle
DM53740-5145
DM53740-5002
DM53740-5005
DM53740-5000
DM53742-5006
DM53742-5001
—
DM53740-5104
DM53740-5101
DM53740-5100
DM53742-5092
DM53742-5089
18,80 (.739)
21,50 (.847)
21,50 (.847)
17,00 (.670)
18,80 (.739)
18,80 (.739)
24,00 (.945)
26,34 (1.037)
26,34 (1.037)
22,20 (.874)
24,00 (.945)
24,00 (.945)
1,70 (.067)
2,79 (.110)
3,18 (.125)
1,14 (.045)
1,00 (.040)
1,70 (.067)
Receptacle
Receptacle
Receptacle
Receptacle (Short Type)
DM53742-5126
DM53742-5002
DM53742-5004
DM53742-5000
—
DM53742-5091
DM53742-5086
DM53742-5085
18,80 (.739)
21,50 (.847)
21,50 (.847)
17,00 (.670)
24,00 (.945)
26,34 (1.037)
26,34 (1.037)
22,20 (.874)
1,70 (.067)
2,79 (.110)
3,18 (.125)
1,14 (.045)
RG Cable Number
Old
196/U
187/U
188/U
—
195/U
58/U
196/U
196/U
187/U
188/U
—
195/U
58/U
196/U
New
178B/U
179B/U
316B/U
RD316
180B/U
58/U
178B/U
178B/U
179B/U
316B/U
RD316
180B/U
58/U
178B/U
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — 90°
90° Crimp Braid
Plug
Receptacle
Note: Dimensions include outer sleeve.
Part Number
Gold Over Nickel
DM53741
DM53741-1
Part Number
50Ȗ in. Gold Over Copper
DM53741-12
DM53741-11
A
max.
13,46 (.530)
13,46 (.530)
B
max.
18,92 (.745)
18,92 (.745)
C
15,10 (.594)
15,10 (.594)
D
±0,13 (.005)
1,14 (.045)
1,83 (.072)
Plug
Plug
Receptacle
Receptacle
DM53741-3
DM53741-4
DM53743-2
DM53743-3
DM53741-10
DM53741-13
DM53743-18
DM53743-16
13,46 (.530)
13,46 (.530)
13,46 (.530)
13,46 (.530)
18,92 (.745)
18,92 (.745)
18,92 (.745)
18,92 (.745)
16,00 (.630)
16,00 (.630)
15,09 (.594)
15,09 (.594)
2,79 (.110)
3,18 (.125)
1,14 (.045)
1,83 (.072)
Receptacle
Receptacle
DM53743-5
DM53743-6
DM53743-17
DM53743-19
13,46 (.530)
13,46 (.530)
18,92 (.745)
18,92 (.745)
16,00 (.630)
16,00 (.630)
2,79 (.110)
3,18 (.125)
Plug
Plug
RG Cable Number
Old
New
196/U
178B/U
187/U
179B/U
188/U
316B/U
195/U
180B/U
58/U
58B/U
196/U
178B/U
187/U
179B/U
188/U
316B/U
195/U
180B/U
58/U
58B/U
For crimp tooling, see page 89.
90° Solder Braid
Plug
Receptacle
Part Number
Gold Over Nickel
DM53741-5000
DM53741-5001
Part Number
50Ȗ in. Gold Over Copper
DM53741-5059
DM53741-5062
A
max.
13,46 (.530)
13,46 (.530)
B
max.
18,92 (.745)
18,92 (.745)
C
15,10 (.594)
15,10 (.594)
D
min.
1,00 (.040)
1,70 (.067)
Plug
Plug
Receptacle
Receptacle
DM53741-5003
DM53741-5004
DM53743-5000
DM53743-5001
DM53741-5063
DM53741-5060
DM53743-5073
DM53743-5076
13,46 (.530)
13,46 (.530)
13,46 (.530)
13,46 (.530)
18,92 (.745)
18,92 (.745)
18,92 (.745)
18,92 (.745)
16,00 (.630)
16,00 (.630)
15,09 (.594)
15,09 (.594)
2,79 (.110)
3,18 (.125)
1,00 (.040)
1,70 (.067)
Receptacle
Receptacle
DM53743-5003
DM53743-5004
DM53743-5077
DM53743-5074
13,46 (.530)
13,46 (.530)
18,92 (.745)
18,92 (.745)
16,00 (.630)
16,00 (.630)
2,79 (.110)
3,18 (.125)
Plug
Plug
RG Cable Number
Old
New
196/U
178B/U
187/U
179B/U
188/U
316B/U
195/U
180B/U
58/U
58/U
196/U
178B/U
187/U
179B/U
188/U
316B/U
195/U
180B/U
58/U
58B/U
Dimensions are shown in mm (inch)
Dimensions subject to change
87
Combo D
D Subminiature
Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts
Insertion Tool
No insertion tool is required. The contact is easily
snapped in from the rear of the connector
manually.
Insertion Instructions
Extraction Tool
CET-C6B-2
Operating Instructions
The CET-C6B-2 tool extracts all coaxial, high
power and high voltage contacts (plug and
receptacle).
Description
CET-C6B-2
88
Part Number
070064-0002
To extract the coaxial contact, hold the tool by the
body and insert the tip into the front of the contact
cavity until it bottoms and closes the coaxial
retaining ring. Holding the body in this position
securely enough to keep coaxial retaining ring
closed, push the plunger; contact will be pushed
out of the rear of the assembly.
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Coaxial Assembly Instructions
Straight and 90° Coaxial Assembly
STEP 1:
Slide the outer ring over the cable jacket. Trim the
cable as specified in the table of Coaxial Cable Trim
Dimensions (see this page). Insert the cable
dielectric and center conductor into the inside
diameter of the inner sleeve. Then solder the center
conductor to the coaxial center contact.
Straight Coaxial
90° Coaxial
Straight and 90° Coaxial Assembly
STEP 2:
Slide the outer ring forward until it is flush with the
coaxial shell containing the braid between the outer
ring and the inner sleeve. For solder type coaxes,
soft solder the outer ring to the assembly through
the cross-drilled solder hold. For crimp type
coaxes, crimp with the appropriate tool in the area
defined.
Straight Coaxial
90° Coaxial
Coaxial Cable Trim Dimensions
RG Cable Number
196/U, 178B/U, 187/U,
188/U, 179B/U, 316B/U
195/U, 180B/U,
58/U, 58B/U
Crimp Tooling
RG Cable Number
196/U, 178B/U
187/U, 179B/U,
188/U, 316B/U
195/U, 180B/U,
58/U, 58B/U
N
± 0,25 (.010)
Straight Coaxial
O
± 0,25 (.010)
P
± 0,25 (.010)
N
± 0,25 (.010)
90° Coaxial
O
± 0,25 (.010)
P
± 0,25 (.010)
7,92 (.312)
6,35 (.250)
1,98 (.078)
9,52 (.375)
5,94 (.234)
1,57 (.062)
9,52 (.375)
7,92 (.312)
1,98 (.078)
10,69 (.422)
7,92 (.312)
2,39 (.094)
Tool Part Number
070051-0000
Description
CCT-DM
Closure
C
070051-0000
CCT-DM
B
070051-0000
CCT-DM
A
Hand tool with integral die set for all coaxial straight
crimp braid.
Dimensions are shown in mm (inch)
Dimensions subject to change
89
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — High Power — Solder
Plug
Part Number
Gold Over Nickel
DM53745-1
DM53745-7
DM53745-8
Part Number
50Ȗ in. Gold over Ni
DM53745-28
DM53745-27
DM53745-25
Current Rating
40 A
20 A
10 A
Wire
Size
8 AWG
12 AWG
16 AWG
Part Number
Gold Over Nickel
DM53744-1
DM53744-6
DM53744-7
Part Number
50Ȗ in. Gold over Ni
DM53744-21
DM53744-25
DM53744-24
Current Rating
40 A
20 A
10 A
Wire
Size
8 AWG
12 AWG
16 AWG
Receptacle
Cable (Size 8) Loose Contacts — High Power — Crimp
Plug
Recommended Wire Trim Length
Part Number
Gold Over Nickel
DM130338-4
DM130339-4
DM130340-4
Receptacle
Part Number
30Ȗ in. Gold over Ni
DM130338
DM130339
DM130340
Part Number
50Ȗ in. Gold over Ni
DM130338-1
DM130339-1
DM130340-1
20,93 - 20,42
(.824 - .804)
XA
max.
4,60 (.181)
2,54 (.100)
1,07 (.067)
XB
max.
5,84 (.230)
5,54 (.218)
2,59 (.102)
Current
Rating
40 A
20 A
10 A
Wire
Size
8 AWG
12 AWG
16 AWG
Recommended Wire Trim Length
ØB ØA
Part Number
Gold Over Nickel
DM130341-4
DM130342-4
DM130343-4
Part Number
30Ȗ in. Gold over Ni
DM130341
DM130342
DM130343
Part Number
50Ȗ in. Gold over Ni
DM130341-1
DM130342-1
DM130343-1
XA
max.
4,60 (.181)
2,54 (.100)
1,07 (.067)
XB
max.
5,84 (.230)
5,54 (.218)
2,59 (.102)
Current
Rating
40 A
20 A
10 A
Wire
Size
8 AWG
12 AWG
16 AWG
High Power Crimp Tooling
M300-BT
Wire
Size
8 AWG
10 AWG
12/14 AWG
16 AWG
18 AWG
90
Crimp
Tool
M300-BT
M300-BT
M300-BT
FT-8
FT-8
Crimp Tool/Locator
Tool Setting
Number
6
5
1
6
5
Locator
TP968
TP968
TP968
TH554
TH554
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
Cable (Size 8) Loose Contacts — High Voltage — Straight
Plug
18,64 (.734)
REF
INSULATOR
RING, RETAINING
For tooling, see page 88.
Part Number
Gold over Ni
DM51157
Part Number
50Ȗ in. Gold
DM51157-8
Wire
Size
20 AWG
Part Number
50Ȗ in. Gold
DM51155-7
Wire
Size
20 AWG
Part Number
50Ȗ in. Gold
DM51157-5005
Wire
Size
20 AWG
Part Number
50Ȗ in. Gold
DM51155-5004
Wire
Size
20 AWG
Receptacle
19,41(.764)
REF
INSULATOR
RING, RETAINING
For tooling, see page 88.
Part Number
Gold over Ni
DM51155
Cable (Size 8) Loose Contacts — High Voltage — 90°
Plug
17,70 (.697)
REF
INSULATOR
RING, RETAINING
For tooling, see page 88.
Part Number
Gold over Ni
DM51157-5000
Receptacle
17,70 (.697)
REF
INSULATOR
RING, RETAINER
For tooling, see page 88.
Part Number
Gold over Ni
DM51155-5000
Dimensions are shown in mm (inch)
Dimensions subject to change
91
Combo D
D Subminiature
PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — Straight
Plug
17,78 (.700)
Ø 0,51
(.020)
5,08
(.200)
Description
Plug
Part Number
DM130358-2
4,19
(.165)
0,25
(.010)
Receptacle
18,00 (.708)
Ø 0,61
(.024)
5,08
(.200)
Description
Receptacle
Part Number
DM130346-2
4,19
(.165)
0,25
(.010)
PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — 90°
Plug
20,32 (.800)
10,26
(.404)
3,81
(.150)
Description
Plug
Part Number
DM130352-2
5,08
(.200)
Ø 0,51
(.020)
Receptacle
20,32 (.800)
10,23
(.403)
3,81
(.150)
Description
Receptacle
92
Part Number
DM130321-3
5,08
(.200)
Ø 0,61
(.024)
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
PCB (Size 8) Loose Contacts — High Power — Straight
Pin
18,23 ± 0,25
(.718 ± .010)
Description
Pin
3,18 ± 0,13
(.125 ± .005)
Part Number
DM53745-110
Socket
18,19 ± 0,25
(.716 ± .010)
3,18 ± 0,13
(.125 ± .005)
Description
Socket
Part Number
DM53744-98
PCB (Size 8) Loose Contacts — High Power —90°
Pin
B
A
ØC
Shell Size
DE, DA, DB, DC
DD
European Footprint DE, DA, DB, DC, DD
Socket
Part Number
DM53745-104
DM53745-107
DM53745-120
A
± 0,25 (.010)
10,62 (.418)
13,41 (.528)
18,06 (.711)
B
±0,25 (.010)
26,64 (1.049)
26,64 (1.049)
11,00 (.433)
XC
±0,13 (.005)
3,18 (.125)
3,18 (.125)
2,90 (.114)
B
A
ØC
Shell Size
DE, DA, DB, DC
DD
European Footprint DE, DA, DB, DC, DD
Part Number
DM53744-92
DM53744-95
DM53744-107
A
± 0,25 (.010)
13,41 (.528)
10,62 (.418)
11,00 (.433)
B
±0,25 (.010)
26,52 (1.044)
26,52 (1.044)
17,93 (.706)
XC
±0,13 (.005)
3,18 (.125)
3,18 (.125)
2,90 (.114)
Dimensions are shown in mm (inch)
Dimensions subject to change
93
Combo D
D Subminiature
PCB (Size 8) Loose Contacts — High Voltage — Straight
Plug
15,95 (.628)
REF
CONTACT, PIN
5,94 - 5,44
(.234 - .214)
Ø 4,88 (.192)
MAX
1,52 - 1,27
(.060 - .050)
Ø 5,72 - 5,33
(.225 - .210)
INSULATOR
Ø 1,65 - 1,50
(.065 - .059)
Ø 3,68 - 3,53
(.145 -.139)
RING, RETAINING
Part Number
Gold over Ni
DM51157-13
Part Number
50Ȗ in. Gold
DM51157-14
Receptacle
16,76 (.660)
REF
CONTACT, SKT
Ø 4,88 (.192)
MAX
Ø 5,72 - 5,33
(.225 - .210)
0,25 - 0,00
(.010 - .000)
Ø 1,65 - 1,50
(.065 - .059)
Part Number
Gold over Ni
DM51155-12
94
6,48 - 6,22
(.255 - .245)
INSULATOR
RING, RETAINING
Part Number
50Ȗ in. Gold
DM51155-13
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D
D Subminiature
PCB Guide Pin and Socket
Installs into any Combo D, Size 8 cavity. This guide
pin and socket system is ideal for blind mate
applications where space is limited.
PCB Guide Pin
29,21 (1.150)
REF
3,68 - 3,43
(.145 - .135)
Part Number
DM53745-126
Material
Copper Alloy
Finish
Tin
11,43 (.450)
REF
Ø 5,66 - 5,41
(.223 - .213)
Ø 3,25 - 3,10
(.128 - .122)
RING, RETAINING
PCB Guide Socket
4,06 (.160)
Part Number
248-2967-000
Material
Copper Alloy
Finish
Tin
16,28 (.641)
REF
CONNECTOR REAR
INSULATOR REF
Dimensions are shown in mm (inch)
Dimensions subject to change
95
D Subminiature
Selection Index
Commercial Micro D — MDSM
Page
Commercial Shielded Micro D
An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Locking/Latching Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Cable Assemblies — Pigtail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
PCB Connector 90° — Single or Stacked. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Cable Connectors (Unassembled Components) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
MDSM SSA Compatible Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
96
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Commercial Micro D — MDSM
M
DSM is the commercial industry’s
smallest D-type connector for shielded
I/O wire-to-board applications.
Requiring less than 1/3 the area of a traditional
D Subminiature connector, MDSM is designed for
situations where space and EMI shielding are the
primary design drivers.
Unlike other micro connectors, MDSM’s rugged
construction and unique contact design combined
with a PdNi contact finish provide durability of
10,000 mating cycles. All of this comes in a sleek
package that includes a snap together shield can
and a slide over boot producing a cable assembly
with an overmolded look and a low assembled
cost. MDSM is an ideal solution for applications
where size, shielding, durability and aesthetics are
key design criteria.
Applications:
ɀ Electronic Notepads
ɀ VME Cards
ɀ Multiplexors
ɀ Serial Storage Devices
ɀ Computer Workstations
ɀ Hand Held Devices
ɀ Bar Code Scanners
Product Features
ɀ
ɀ
ɀ
ɀ
ɀ
1,27 (.050) Pitch / Saves Space
Fully Shielded / Reduces EMI
Crimp Contacts / Applied Cost Savings
Accessories Included / Fewer Part Numbers
PdNi Plating / 10,000 Mating Cycles
ɀ Stacked Versions / Saves Horizontal Space
ɀ Slide Over Boot / Results in Overmolded
Appearance
ɀ Choice of Two Different Latching Options
(Thumbscrew / Push-Pull)
Approvals & Certifications
ɀ SSA (Serial Storage Architecture)
ɀ U.L. File Number E8572
ɀ ISO 9001
Specifications
Temperature Rating
Current Rating
Contact Resistance
Insulation Resistance
Dielectric Withstanding Voltage
Durability
Shock / Vibration
Wire Size
− 55°C to 125°C
1 A — temp dependent
20 mȉ Max.
5000 Mȉ Min.
350 V at Sea Level
10,000 Mating Cycles
50 G’s / 50 G’s
26 to 30 AWG
Materials and Finishes
Description
Shell
Shield Can
Cover
Insulator
Contacts
Material
Steel
Steel
Steel
Thermoplastic, UL94 V-O
Copper Alloy
Finish
Nickel
Tin
Tin
None
Gold flash over 30 microinches PdNi in mating area, Tin on balance
Contact Arrangements
(Face View of Pin Insert — Use Mirror Image for Socket Side)
9 Contacts
15 Contacts
25 Contacts
Dimensions are shown in mm (inch)
Dimensions subject to change
97
D Subminiature
C ommercial M icro D — M DSM
Locking/Latching Options
Jackscrew
Push/Pull
The jackscrew locking system is designed for applications which require a
secure connection. Utilize thumbscrews when the connectors are infrequently
unmated.
The push/pull latching system is designed for applications which require a
quick connect and disconnect. A spring retention mechanism latches to a post
on the board side to prevent unintentional unmatings.
Z10 Jackpost
Z42 Jackpost
#2-56 UNC
3,18 (.125)
HE X
(AC R OS S F LAT S )
1,25 (.049)
Note: Two Jackposts supplied with boardside connectors.
#2-56 UNC
6,45
(.254)
¯ 3,25
(.128)
1,25 (.049)
0,52 (.020)
6,45
(.254)
Note: Two Jackposts supplied with boardside connectors.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Commercial Micro D — MDSM
PCB Connector 90° - Single
Note: Standard jackpost offering recommended for use with .060 panel.
No. of
Contacts
9
15
25
Part Numbers - Single
Thumbscrew
Push/Pull
MDSM-9PE-Z10-VR25*
MDSM-9E-Z42-VR25*
MDSM-15PE-Z10-VR22
MDSM-15PE-Z42-VR22
MDSM-25PE-Z10-VR17
MDSM-25PE-Z42-VR17
A
max.
19,90 (.783)
23,60 (.929)
29,95 (1.179)
B
14,35 (.565)
18,16 (.715)
24,51 (.965)
C
max.
8,60 (.339)
12,30 (.484)
18,65 (.734)
D
max.
9,00 (.354)
12,90 (.508)
19,25 (.758)
E
5,08 (.200)
8,89 (.350)
15,24 (.600)
F
±0,05 (.002)
10,24 (.403)
14,01 (.551)
20,35 (.801)
A
max.
19,90 (.783)
23,50 (.925)
B
14,35 (.565)
18,16 (.715)
C
max.
8,60 (.339)
12,30 (.484)
D
max.
9,00 (.354)
12,71 (.500)
E
5,08 (.200)
8,89 (.350)
F
10,24 (.403)
14,00 (.551)
*For use with SSA applications
PCB Connector 90° - Stacked
No. of
Contacts
18
30
Part Numbers - Stacked
Thumbscrew
Push/Pull
MDSM-18PE-Z10-VR25*
MDSM-18PE-Z42-VR25*
MDSM-30PE-Z10-VR22
MDSM-30PE-Z42-VR22
*For use with SSA applications
Dimensions are shown in mm (inch)
Dimensions subject to change
99
D Subminiature
Commercial Micro D — MDSM
Cable Connectors (Unassembled Components)
Jackscrew
JACKSCREW
HOOD
SHELL/SHIELD
ASSEMBLY
CABLE
(CUSTOMER
SUPPLIED)
CRIMP CONTACTS
(PURCHASED
SEPARATELY)
Cable connectors are supplied as complete kits
with insulator, hood, locking hardware, shell/
shield assembly, and cover, bulk packaged.
INSULATOR
SHELL COVER
Push/Pull
8,00
(.315)
HOOD
D
SHELL/SHIELD
ASSEMBLY
CABLE
(CUSTOMER
SUPPLIED)
CRIMP CONTACTS
(PURCHASED
SEPARATELY)
INSULATOR
SHELL COVER
Cable connectors are supplied as complete kits
with insulator, hood, shell/shield assembly, and
cover, bulk packaged.
C
B
5,60
(.220)
A
MAX
Jackscrew
Push/Pull
A
B
Layout
Part Numbers
Part Numbers
max.
0,10 (.004)
9 MDSM-9SC-Z11-VS1 MDSM-9SC-Z24-VS1 19,90 (.783) 14,35 (.565)
15 MDSM-15SC-Z11-VS1 MDSM-15SC-Z24-VS1 23,70 (.993) 18,16 (.715)
25 MDSM-25SC-Z11-VS1 MDSM-25SC-Z24-VS1 30,05 (1.183) 24,51 (.965)
C
0,10 (.004)
9,45 (.372)
13,17 (.519)
19,52 (.769)
D
max.
35,50 (1.40)
35,50 (1.40)
42,50 (1.67)
7,50
(.295)
MAX
Max.
Cable Entry
5,70 (.224)
6,70 (.264)
7,90 (.311)
Note: VS1 refers to packaging multiples of 100.
Contacts are sold separately, see this page.
Crimp Contacts
Wire Trim Dimensions
0,95 (.037)
2,60 (.102)
15,00 (.591)
25,00
(.984)
Part Numbers
Socket
1,000 Piece Reel
MDS-S-TS
10,000 Piece Reel
MDS-S-RL
For crimp tooling, see page 101.
100
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Commercial Micro D — MDSM
Contact Crimping Tools
Parallel Action Low Volume Hand Tool
Hand Tool
Semi-Automatic Crimper/Stripper
Part Number: CCTP-MDS
Note: For use with individual contacts (break off reel
MDS-S-TS or MDS-S-RL.
Part Number: CCTR-MDS
Note: For use with reeled contacts - Part Number MDS-S-TS.
Part Number: ABT-620-MDS (Lease Only)
Note: For use with reeled contacts - Part Number MDS-S-RL.
For additional information, see page 275.
Crimp dies for SSA Cable will be offered by ITT Cannon.
Consult factory for details.
Contact Insertion/Extraction Tools
Jackpost Tool
Insertion Tool
Part Number: CIET-MDSM
Note: For use with Z10 Jackpost.
Part Number: 120090-0102
Note: Contacts cannot be removed from MDSM connectors.
Shield Crimp Tooling
ɀ Shield crimping requires four items; one
press, one locator, and one each of the two
dies listed below.
ɀ Locator and Dies for Shield Termination
Ordered Separately
Hand Press
Pneumatic Press
Part Numbers
Layout
9
15
25
Locator
317-8666-013
317-8666-014
317-8666-016
Die
274-8649-332/274-8649-333
274-8649-334/274-8649-335
274-8649-338/274-8649-339
Note: For assembly instructions and crimping information, refer
to Manual #MY-1/190.
Part Number: CHP-MDSM-SR
Part Number: CPT-MDSM-SR
Dimensions are shown in mm (inch)
Dimensions subject to change
101
D Subminiature
Commercial Micro D — MDSM
MDSM SSA Compatible Cable Assemblies
interfaces. SSA permits the transfer of data at
progressively higher speeds - 20 MB/sec interface
currently available with 40 MB/sec becoming
available in 1997/98. ITT Cannon’s MDSM
connector not only functions at these high speeds,
but also brings to SSA smaller, less cumbersome
and higher reliability cables and connectors than
current options.
ITT Cannon’s 9 position MDSM connectors have
been designed into the ANSI specification called
SSA, ‘‘Serial Storage Architecture,’’ as the external
I/O. SSA is a new serial interface for
interconnecting storage devices, storage
subsystems, servers and workstations. Storage
subsystems are increasing in function, availability,
density and performance. With this comes the
trend for them to become more complex and
ITT Cannon has the interconnect system which
meets SSA’s high performance requirements.
ITT Cannon is offering SSA compatable external
cable assemblies in six different lengths to meet
your needs. These assemblies consist of two
MDSM 9SC type cable connectors terminated to
SSA specified external cable.
SSA is an architecture which allows these new
subsystems to be implemented more easily and at
lower costs than other new high speed parallel
X
5,71 (.225)
P2
P1
19,89
(.783) 14,35
MAX (.565)
41,62
(1.639)
MAX
56,01
(2.205)
REF
Note: Cables shown with Z50 thumbscrews.
Part Number
CA112104
CA112104-1
CA112104-2
CA112104-3
CA112104-4
CA112104-5
X
Meter (Feet)
0,50 (1.600)
1,00 (2.200)
3,00 (9.800)
5,00 (16.400)
10,00 (32.800)
20,00 (65.600)
Tolerance
±25,00 (1.000)
±25,00 (1.000)
±25,00 (1.000)
±64,00 (2.500)
±64,00 (2.500)
±64,00 (2.500)
Note: For push/pull assemblies or other thumbscrews, please consult the factory.
Crimp dies for SSA applications will be offered by ITT Cannon. Consult factory for details.
102
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Commercial Micro D — MDSM
Pinout
SSA External Cable Wiring Table
CONTACT #5
CONTACT #9
CONTACT #6
CONTACT #1
P1
P2
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
8,51
(.335)
MAX
Note: Shield connected to both shells.
External Cable Pinouts
P1
P2
Pin
2
6
4
9
Signal Name
LineOut−
LineOut+
LineIn−
LineIn+
Pin
4
9
2
6
Signal Name
LineIn−
LineIn+
LineOut−
LineOut+
Note: Pins 1, 3, 5, 7 and 8 are not connected.
SSA External Cable Wire Cross Section (For Reference Only)
CONDUCTOR
INSULATION
Ø 5,72
(.225)
FILLER
Ø 1,57
(.062)
INNER SHIELD
OUTER SHIELD
JACKET
Transfer Impedance Performance
Requirements for External SSA Connections
Frequency MHz
30
159
500
Value (dB-Ohm)(max.)
−25
−16
−10
Dimensions are shown in mm (inch)
Dimensions subject to change
103
D Subminiature
Selection Index
Filter D
Page
Filter D
An Introduction to D*JK and D*JT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
D*JK Filter Performance and Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
D*JT Filter Performance and Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
D*JK Connectors
Standard Footprint .318ɍ or .283ɍɍ inches
90° PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
90° PC Tails, Metal Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
European Footprint 10,2ɍ or 9,4ɍɍ mm
90° PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
90° PC Tails, Metal Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
90° PC Tails, Plastic Brackets & Grounding Straps . . . . . . . . . . . . . . . . . . . . . . . . . 116
90° PC Tails, Plastic Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Straight PC Tails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
D*JT Connectors
Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Combo — High Power 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Combo — High Power Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Combo — High Power Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
104
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK/D*JT
F
ilter connectors series D*JK and D*JT from
ITT Cannon especially designed for
commercial applications provide excellent
protection against EMI and RFI.
Using D Subminiature standard components a
cost-effective production can be achieved as well
as 100% compatibility with equivalent products
according to DIN 41652. D Subminiature standard
accessories can be used.
High quality tubular ceramic capacitors are
assembled onto the D*JK contacts and soldered to
contact and backshell while series D*JT
connectors apply planar array filters.
Applications:
ɀ EMI/RFI Sensitive Electronics
ɀ Test & Measurement Equipment
ɀ Computer Equipment
ɀ Medical Equipment
ɀ Telecommunication Transmission
Product Features
ɀ HF–tightness and mechanical stability by
closed backshell
ɀ Free-stamped grounding fingers (pin
connector only)
ɀ Straight and 90° solder pins (D*JK)
ɀ Solder cups, straight and 90° solder pins
(D*JT)
ɀ Versatile mounting possibilities (brackets,
captive nuts)
ɀ Contact finsh according to performance
class 2 (standard) or class 1
Specifications
Temperature Range Per DIN IEC 68 Part 1
−55°C to 125°C
Materials and Finishes
Description
Shell
Insulator
Contacts
Material
Steel
Thermoplastic, UL 94V-0
Copper Alloy
Finish
Tin
None
Gold over Nickel
Mechanical Data
Coupling
Polarization
Termination
Friction, accessories
Keystone shape of shell
PC tails, straight and 90°
Solder cups
Dimensions are shown in mm (inch)
Dimensions subject to change
105
D Subminiature
Filter D
D*JK Filter Performance
D*JK Electrical Data
Voltage rating (working)
Current rating
Insulation resistance,
electrification time 30 s, temperature 25°C
Dielectric Withstanding Voltage (Sea Level)
500 micro amps max. charge/discharge
Filter Type C
Filter Symbol per DIN
100 VDC
5A
5000 Mȉ min./100 V
250 VDC
Capacitor
Filter designation
5
4
Capacitance, type
at 1 KHz, 0,1 Vrms, 25°C
1500 pF
1000 pF
Frequency
Attenuation
Attenuation
MHz
db min.
db min.
10
3
—
30
20
14
100
31
27
300
39
35
1000
47
42
2000
51
46
Attenuation per MIL-STD-220 at 25°C with no applied voltage or current
106
3
2
1
680 pF
Attenuation
db min.
—
10
22
30
37
42
470 pF
Attenuation
db min.
—
7
18
27
32
36
330 pF
Attenuation
db min.
—
2
9
18
28
31
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JT Filter Performance
D*JT Electrical Data
Voltage rating (working)
Current rating
Insulation resistance,
electrification time 30 s, temperature 25°C
Dielectric Withstanding Voltage (Sea Level)
500 micro amps max. charge/discharge
Filter type C
Filter symbol per DIN
200 VDC/120 Vrms, 400 Hz
5 A (Size 20 contacts), 30 A (Size 8 contacts)
10,000 Mȉ min./100 V
500 VDC
Capacitor
Filter designation
9
5
4
Capacitance, type
at 1 KHz, 0,1 Vrms, 25°C
47000 pF
5000 pF
2000 pF
Frequency
Attenuation
Attenuation
Attenuation
MHz
db min.
db min.
db min.
5
30
11
6
10
37
16
10
100
50
35
27
1000
45
54
48
2000
—
64
60
5000
—
64
64
Attenuation per MIL-STD-220 at 25°C with no applied voltage or current
6
1
2
3
1500 pF
Attenuation
db min.
3
7
23
46
—
—
1000 pF
Attenuation
db min.
—
5
20
42
60
64
500 pF
Attenuation
db min.
—
2
16
37
60
64
250 pF
Attenuation
db min.
—
1
14
35
60
64
Dimensions are shown in mm (inch)
Dimensions subject to change
107
D Subminiature
Filter D
D*JK — 90° PC Tails — Standard Footprint .318ɍ or .283 inch ɍɍ
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Clinch Nut
#4-40 UNC
DEJKE9P*-1U0N
DAJKE15P*-1U0N
DBJKE25P*-1U0N
DCJKE37P*-1U0N
Through Hole
DEJK9P*-1U0N
DAJK15P*-1U0N
DBJK25P*-1U0N
DCJK37P*-1U0N
* Insert filter designator. Example: DEJK9P4-1U0N (For 1000 pF Filter Capacitance)
Note: For performance class 1 add -A190. Example: DEJK9P1-1U0N-A190
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
3,50 (.138)
2,84 (.112)
7,19 (.283)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,72 (.422)
10,72 (.422)
W
±0,37 (.015)
6,69 (.264)
6,69 (.264)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
108
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails — Standard Footprint .318ɍ or .283 inch ɍɍ
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Clinch Nut
#4-40 UNC
DEJKE9S*-1U0N
DAJKE15S*-1U0N
DBJKE25S*-1U0N
DCJKE37S*-1U0N
Through Hole
DEJK9S*-1U0N
DAJK15S*-1U0N
DBJK25S*-1U0N
DCJK37S*-1U0N
* Insert filter designator. Example: DEJK9S4-1U0N (for 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S1-1U0N-A190
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
3,50 (.138)
2,84 (.112)
7,19 (.283)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
109
D Subminiature
Filter D
D*JK — 90° PC Tails — European Footprint 10,2ɍ or 9,4 mmɍɍ
Part Numbers
Plug
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Clinch Nut
#4-40 UNC
DEJKE9P*-1A0N
DAJKE15P*-1A0N
DBJKE25P*-1A0N
DCJKE37P*-1A0N
Through Hole
DEJK9P*-1A0N
DAJK15P*-1A0N
DBJK25P*-1A0N
DCJK37P*-1A0N
Clinch Nut
M3
DEJKX9P*-1A0N
DAJKX15P*-1A0N
DBJKX25P*-1A0N
DCJKX37P*-1A0N
* Insert filter designator. Example: DEJK9P4-1A0N (For 1000 pF Filter Capacitance)
Modifier: For performance class 1 add -A190. Example: DEJK9P1-1A0N-A190
Filter Designator*
1
2
3
4
5
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware options (European),
see page 227.
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
Ø 3,05 (.120)
B
10°
1
8
D
E
9
15
Ø 0,60 (.024)
4,73 (.186)
2,54 (.100)
9,40
(.370)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,72 (.422)
10,72 (.422)
W
±0,37 (.015)
6,69 (.264)
6,69 (.264)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
110
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails — European Footprint 10,2ɍ or 9,4 mmɍɍ
Part Numbers
Receptacle
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEJK9S*-1A0N
DAJK15S*-1A0N
DBJK25S*-1A0N
DCJK37S*-1A0N
Clinch Nut
#4-40 UNC
DEJKE9S*-1A0N
DAJKE15S*-1A0N
DBJKE25S*-1A0N
DCJKE37S*-1A0N
Clinch Nut
M3
DEJKX9S*-1A0N
DAJKX15S*-1A0N
DBJKX25S*-1A0N
DCJKX37S*-1A0N
* Insert filter designator. Example: DEJK9S4-1A0N (for 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S1-1A0N-A190
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware options (European),
see page 227.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
4,73 (.186)
2,54 (.100)
9,40
(.370)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
111
D Subminiature
Filter D
D*JK — 90° PC Tails and Metal Brackets — Standard Footprint .318ɍ or .283 inchɍɍ
Part Numbers
Plug
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For pushfit/boardlock configuration,
see page 225.
Shell Size
DE
DA
DB
DC
Bracket,
#4-40 Nut,
Boardlock
DEJK9P*-1U7N-146
DAJK15P*-1U7N-146
DBJK25P*-1U7N-146
DCJK37P*-1U7N-146
Bracket,
#4-40 Nut
DEJK9P*-1U7N
DAJK15P*-1U7N
DBJK25P*-1U7N
DCJK37P*-1U7N
Layout
9
15
25
37
Insert filter designator *. Example: DEJK9P4-1U7N-146 (For 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9P4-1U7N-A190-146
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
3,50 (.138)
BRACKET,
METAL
2,84 (.112)
BUSHING
7,19 (.283)
W
F
L
Boardlock removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
112
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails and Metal Brackets — Standard Footprint .318ɍ or .283 inchɍɍ
Part Numbers
Receptacle
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For pushfit/boardlock configuration,
see page 225.
Shell Size
DE
DA
DB
DC
Bracket,
#4-40 Nut,
Boardlock
DEJK9S*-1U7N-146
DAJK15S*-1U7N-146
DBJK25S*-1U7N-146
DCJK37S*-1U7N-146
Bracket,
#4-40 Nut
DEJK9S*-1U7N
DAJK15S*-1U7N
DBJK25S*-1U7N
DCJK37S*-1U7N
Layout
9
15
25
37
Insert filter designator *. Example DEJK9S4-1U7N-146 (For 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S4-1U7N-A190-146
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
8
E
1
15
D
9
2,89 (.114)
0,60 (.024)
BOARDLOCK
BRACKET,
METAL
3,50 (.138)
2,84 (.112)
BUSHING
7,19 (.283)
F
W
L
Boardlock removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
113
D Subminiature
Filter D
D*JK — 90° PC Tails and Metal Brackets — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Bushing with
Through Hole
DEJK9P*-1AFN
DAJK15P*-1AFN
DBJK25P*-1AFN
DCJK37P*-1AFN
Captive Nut
#4-40 UNC
DEJK9P*-1A7N
DAJK15P*-1A7N
DBJK25P*-1A7N
DCJK37P*-1A7N
Captive Nut
M3
DEJK9P*-1A9N
DAJK15P*-1A9N
DBJK25P*-1A9N
DCJK37P*-1A9N
Post
#4-40 UNC
DEJK9P*-1A8N
DAJK15P*-1A8N
DBJK25P*-1A8N
DCJK37P*-1A8N
Post
M3
DEJK9P*-1AHN
DAJK15P*-1AHN
DBJK25P*-1AHN
DCJK37P*-1AHN
* Insert filter designator. Example: DEJK9P4-1A7N (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1AFN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1AFN-A190-146
Filter Designator*
1
2
3
4
5
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
1
8
9
15
D
E
2,89 (.114)
1,00 (.039)
BOARDLOCK
Ø 0,60 (.024)
3,70 (.146)
BRACKET,
METAL
2,54 (.100)
BUSHING
9,40 (.370)
W
F
L
Boardlock removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
114
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails and Metal Brackets — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Bushing with
Through Hole
DEJK9S*-1AFN
DAJK15S*-1AFN
DBJK25S*-1AFN
DCJK37S*-1AFN
Captive Nut
#4-40 UNC
DEJK9S*-1A7N
DAJK15S*-1A7N
DBJK25S*-1A7N
DCJK37S*-1A7N
Captive Nut
M3
DEJK9S*-1A9N
DAJK15S*-1A9N
DBJK25S*-1A9N
DCJK37S*-1A9N
Post
#4-40 UNC
DEJK9S*-1A8N
DAJK15S*-1A8N
DBJK25S*-1A8N
DCJK37S*-1A8N
Post
M3
DEJK9S*-1AHN
DAJK15S*-1AHN
DBJK25S*-1AHN
DCJK37S*-1AHN
* Insert filter designator. Example: DEJK9S4-1A7N (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9S1-1AFN-A190
For pushfit/boardlocks add -146. Example: DEJK9S1-1AFN-A190-146
Filter Designator*
1
2
3
4
5
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
8
E
1
15
D
9
2,89 (.114)
1,00 (.039)
Ø 0,60 (.024)
BOARDLOCK
BRACKET,
METAL
BUSHING
3,70 (.146)
2,54 (.100)
9,40 (.370)
W
F
L
Boardlock removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
115
D Subminiature
Filter D
D*JK — 90° PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Bushing with
Through Hole
DEJK9P*-1ADN
DAJK15P*-1ADN
DBJK25P*-1ADN
DCJK37P*-1ADN
Captive Nut
#4-40 UNC
DEJK9P*-1AWN
DAJK15P*-1AWN
DBJK25P*-1AWN
DCJK37P*-1AWN
Captive Nut
M3
DEJK9P*-1AVN
DAJK15P*-1AVN
DBJK25P*-1AVN
DCJK37P*-1AVN
Post
#4-40 UNC
DEJK9P*-1AJN
DAJK15P*-1AJN
DBJK25P*-1AJN
DCJK37P*-1AJN
Post
M3
DEJK9P*-1AGN
DAJK15P*-1AGN
DBJK25P*-1AGN
DCJK37P*-1AGN
* Insert filter designator. Example: DEJK9P4-1AWN (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1ADN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
1
8
9
15
D
E
1,00 (.039)
Ø 0,60 (.024)
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
3,70 (.146)
2,54 (.100)
9,40 (.370)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
116
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Bushing with
Through Hole
DEJK9S*-1ADN
DAJK15S*-1ADN
DBJK25S*-1ADN
DCJK37S*-1ADN
Captive Nut
#4-40 UNC
DEJK9S*-1AWN
DAJK15S*-1AWN
DBJK25S*-1AWN
DCJK37S*-1AWN
Captive Nut
M3
DEJK9S*-1AVN
DAJK15S*-1AVN
DBJK25S*-1AVN
DCJK37S*-1AVN
Post
#4-40 UNC
DEJK9S*-1AJN
DAJK15S*-1AJN
DBJK25S*-1AJN
DCJK37S*-1AJN
Post
M3
DEJK9S*-1AGN
DAJK15S*-1AGN
DBJK25S*-1AGN
DCJK37S*-1AGN
* Insert filter designator. Example: DEJK9S4-1AWN (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJKS1-1ADN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Desginator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
8
E
15
1
D
9
1,00 (.039)
Ø 0,60 (.024)
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
3,70 (.146)
2,54 (.100)
9,40 (.370)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
117
D Subminiature
Filter D
D*JK — 90° PC Tails & Plastic Brackets — European Footprint 10,2ɍ or 9,4 mmɍɍ
Plug
Part Numbers
Bushing with
Through Hole
DEJK9P*-1A5N
DAJK15P*-1A5N
DBJK25P*-1A5N
DCJK37P*-1A5N
Captive Nut
#4-40 UNC
DEJK9P*-1AUN
DAJK15P*-1AUN
DBJK25P*-1AUN
DCJK37P*-1AUN
Captive Nut
M3
DEJK9P*-1ATN
DAJK15P*-1ATN
DBJK25P*-1ATN
DCJK37P*-1ATN
Post
#4-40 UNC
DEJK9P*-1A6N
DAJK15P*-1A6N
DBJK25P*-1A6N
DCJK37P*-1A6N
Post
M3
DEJK9P*-1APN
DAJK15P*-1APN
DBJK25P*-1APN
DCJK37P*-1APN
* Insert filter designator. Example: DEJK9P4-1A5N (For 1000 pF filter capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1A5N-A190
For pushfit/boardlocks add-146. Example: DEJK9P1-1A5N-A190-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
1
8
9
15
D
E
1,00 (.039)
Ø 0,60 (.024)
BRACKET,
PLASTIC
3,70 (.146)
2,54 (.100)
9,40 (.370)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0.13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,37 (.015)
6,69 (.264)
6,69 (.264)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
118
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — 90° PC Tails and Plastic Brackets — European Footprint 10,2ɍ or 9,4 mmɍɍ
Receptacle
Part Numbers
Bushing with
Through Hole
DEJK9S*-1A5N
DAJK15S*-1A5N
DBJK25S*-1A5N
DCJK37S*-1A5N
Captive Nut
#4-40 UNC
DEJK9S*-1AUN
DAJK15S*-1AUN
DBJK25S*-1AUN
DCJK37S*-1AUN
Captive Nut
M3
DEJK9S*-1ATN
DAJK15S*-1ATN
DBJK25S*-1ATN
DCJK37S*-1ATN
Post
#4-40 UNC
DEJK9S*-1A6N
DAJK15S*-1A6N
DBJK25S*-1A6N
DCJK37S*-1A6N
Post
M3
DEJK9S*-1APN
DAJK15S*-1APN
DBJK25S*-1APN
DCJK37S*-1APN
* Insert filter designator. Example: DEJK9S4-1A5N (for 1000 pF filter capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9S1-1A5N-A190
For pushfit/boardlocks add -146. Example: DEJK9S1-1A5N-A190-146
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
C
B
10°
8
E
15
1
D
9
1,00 (.039)
Ø 0,60 (.024)
BRACKET,
PLASTIC
3,70 (.146)
2,54 (.100)
9,40 (.370)
W
L
F
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
119
D Subminiature
Filter D
D*JK — Straight P.C. Tails
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DEJK9P*-OL4
DAJK15P*-OL4
DBJK25P*-OL4
DCJK37P*-OL4
DDJK50P*-OL4
Clinch Nut
#4-40 UNC
DEJKE9P*-OL4
DAJKE15P*-OL4
DBJKE25P*-OL4
DCJKE37P*-OL4
DDJKE50P*-OL4
Clinch Nut
M3
DEJKX9P*-OL4
DAJKX15P*-OL4
DBJKX25P*-OL4
DCJKX37P*-OL4
DDJKX50P*-OL4
Pushfit/Boardlock
#4-40 UNC
DEJKE9P*-OL4-146
DAJKE15P*-OL4-146
DBJKE25P*-OL4-146
DCJKE37P*-OL4-146
DDJKE50P*-OL4-146
Pushfit/Boardlock
M3
DEJKX9P*-OL4-146
DAJKX15P*-OL4-146
DBJKX25P*-OL4-146
DCJKX37P*-OL4-146
DDJKX50P*-OL4-146
* Insert filter designator. Example: DEJK9P4-0L4 (for 1000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJK9P1-0L4-A190
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For Hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Designator*
1
2
3
4
5
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
DD Configuration
A
5,68 (.224)
Ø 3,05 (.120)
C
2,84 (.112)
B
10°
1
8
E
D
9
15
L
2,84 (.112)
Ø 0,60 (.024)
11,70 ± 0,20
(.461 ± .008)
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
120
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.439)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.607)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JK — Straight P.C. Tails
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEJK9S*-OL4
DAJK15S*-OL4
DBJK25S*-OL4
DCJK37S*-OL4
Clinch Nut
#4-40 UNC
DEJKE9S*-OL4
DAJKE15S*-OL4
DBJKE25S*-OL4
DCJKE37S*-OL4
Clinch Nut
M3
DEJKX9S*-OL4
DAJKX15S*-OL4
DBJKX25S*-OL4
DCJKX37S*-OL4
Pushfit/Boardlock
#4-40 UNC
DEJKE9S*-OL4-146
DAJKE15S*-OL4-146
DBJKE25S*-OL4-146
DCJKE37S*-OL4-146
Pushfit/Boardlock
M3
DEJKX9S*-OL4-146
DAJKX15S*-OL4-146
DBJKX25S*-OL4-146
DCJKX37S*-OL4-146
* Insert filter designator. Example: DEJK9S4-OL4 (for 1000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJK9S1-OL4-A190
Filter Designator*
1
2
3
4
5
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For Hardware views (European),
see page 227.
ɀ For pushfit/boardlock configuration,
see page 225.
Filter Capacitance
330 pF
470 pF
680 pF
1000 pF
1500 pF
For electrical data, see page 106.
Engaging Face
A
Ø 3,05 (.120)
C
B
10°
8
E
1
15
D
9
2,84 (.112)
Ø 0,60 (.024)
11,70 ± 0,20
(.461 ± .008)
W
F
L
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
121
D Subminiature
Filter D
D*JT — Solder Cup
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEJT9P*
DAJT15P*
DBJT25P*
DCJT37P*
Clinch Nut #4-40 UNC
DEJTE9P*
DAJTE15P*
DBJTE25P*
DCJTE37P*
Clinch Nut M3
DEJTX9P*
DAJTX15P*
DBJTX25P*
DCJTX37P*
* Insert filter designator. Example: DCJT37P4 (for 2000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DCJT37P1-A190
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Filter Designator*
1
2
3
4
5
Filter Capacitance
1000 pF
500 pF
250 pF
2000 pF
5000 pF
For electrical data, see page 107.
Engaging Face
2,84 (.112)
9,80 (.386)
MAX
W
L
F
Dimensions
Shell Size
DE
DA
DB
DC
122
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0.13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,37 (.015)
6,69 (.264)
6,69 (.264)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JT — Solder Cup
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
Layout
9
15
25
37
Through Hole
DEJT9S*
DAJT15S*
DBJT25S*
DCJT37S*
Clinch Nut #4-40 UNC
DEJTE9S*
DAJTE15S*
DBJTE25S*
DCJTE37S*
Clinch Nut M3
DEJTX9S*
DAJTX15S*
DBJTX25S*
DCJTX37S*
* Insert filter designator. Example: DEJT9S4 (for 2000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJT9S1-A190
Filter Designator*
1
2
3
4
5
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Filter Capacitance
1000 pF
500 pF
250 pF
2000 pF
5000 pF
For electrical data, see page 107.
Engaging Face
A
C
Ø 3,05 (.120)
B
POSITION 1
D
E
10°
2,84 (.112)
9,80 (.386)
MAX
L
W
F
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
123
D Subminiature
Filter D
D*JT Combo — High Power 90°
Plug
Part Numbers
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 250.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Clinch Nut
#4-40 UNC
DAJTE3W3P1-1A0N
DAJTE3W3P6-1A0N
DAJTE3W3P5-1A0N
DAJTE3W3P9-1A0N
Through Hole
DAJT3W3P1-1A0N
DAJT3W3P6-1A0N
DAJT3W3P5-1A0N
DAJT3W3P9-1A0N
Clinch Nut
M3
DAJTX3W3P1-1A0N
DAJTX3W3P6-1A0N
DAJTX3W3P5-1A0N
DAJTX3W3P9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190
Part Numbers — Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Clinch Nut
#4-40 UNC
DAJTE3WK3P1-1A0N
DAJTE3WK3P6-1A0N
DAJTE3WK3P5-1A0N
DAJTE3WK3P9-1A0N
Through Hole
DAJT3WK3P1-1A0N
DAJT3WK3P6-1A0N
DAJT3WK3P5-1A0N
DAJT3WK3P9-1A0N
Clinch Nut
M3
DAJTX3W3KP1-1A0N
DAJTX3WK3P6-1A0N
DAJTX3WK3P5-1A0N
DAJTX3WK3P9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190
For electrical data, see page 107.
Keyed Configuration
Engaging Face
Engaging Face
A
A
Ø 3,05 (.120)
C
10°
A1
B
10°
A1
A3
E
Ø 3,05 (.120)
C
B
A3
E
D
D
Ø 2,60 (.102)
Ø 2,60 (.102)
12,30
(.484)
W
L
F
Dimensions
Shell Size
DA
124
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
25,25 (.994)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
W
±0,368 (.0145)
6,693 (.2635)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JT Combo — High Power 90°
Part Numbers
Receptacle
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 252.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Clinch Nut
#4-40 UNC
DAJTE3W3S1-1A0N
DAJTE3W3S6-1A0N
DAJTE3W3S5-1AON
DAJTE3W3S9-1A0N
Through Hole
DAJT3W3S1-1A0N
DAJT3W3S6-1A0N
DAJT3W3S5-1AON
DAJT3W3S9-1A0N
Clinch Nut
M3
DAJTX3W3S1-1A0N
DAJTX3W3S6-1A0N
DAJTX3W3S5-1AON
DAJTX3W3S9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3W3S9-1AON-A190
Part Numbers — Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000pF
Clinch Nut
#4-40 UNC
DAJTE3WK3S1-1A0N
DAJTE3WK3S6-1A0N
DAJTE3WK3S5-1AON
DAJTE3WK3S9-1A0N
Through Hole
DAJT3WK3S1-1A0N
DAJT3WK3S6-1A0N
DAJT3WK3S5-1AON
DAJT3WK3S9-1A0N
Clinch Nut
M3
DAJTX3WK3S1-1A0N
DAJTX3WK3S6-1A0N
DAJTX3WK3S5-1AON
DAJTX3WK3S9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3S9-1AON-A190
For electrical data, see page 107.
Keyed Configuration
Engaging Face
Engaging Face
A
A
C
C
B
10°
A3
Ø 3,05 (.120)
B
10°
A3
A1
D
E
Ø 3,05 (.120)
A1
D
E
2,60 (.102)
2,60 (.102)
12,30
(.484)
L
W
F
Dimensions
Shell Size
DA
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
24,66 (.971)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
125
D Subminiature
Filter D
D*JT Combo — High Power Straight
Part Numbers
Plug
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Clinch Nut
#4-40 UNC
DAJTE3W3P1-OL4
DAJTE3W3P6-OL4
DAJTE3W3P5-OL4
DAJTE3W3P9-OL4
Through Hole
DAJT3W3P1-OL4
DAJT3W3P6-OL4
DAJT3W3P5-OL4
DAJT3W3P9-OL4
Clinch Nut
M3
DAJTX3W3P1-OL4
DAJTX3W3P6-OL4
DAJTX3W3P5-OL4
DAJTX3W3P9-OL4
Note: For performance class 1 add -A190. Example: DAJT3W3P6-OL4-A190
Part Numbers — Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 254.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Clinch Nut
#4-40 UNC
DAJTE3WK3P1-OL4
DAJTE3WK3P6-OL4
DAJTE3WK3P5-OL4
DAJTE3WK3P9-OL4
Through Hole
DAJT3WK3P1-OL4
DAJT3WK3P6-OL4
DAJT3WK3P5-OL4
DAJT3WK3P9-OL4
Clinch Nut
M3
DAJTX3WK3P1-OL4
DAJTX3WK3P6-OL4
DAJTX3WK3P5-OL4
DAJTX3WK3P9-OL4
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-OL4-A190
For electrical data, see page 107.
Keyed Configuration
Engaging Face
Engaging Face
A
A
Ø 3,05 (.120)
C
A1
B
10°
A3
E
Ø 3,05 (.120)
C
B
10°
A1
D
A3
E
D
Ø 2,60 (.102)
11,60 ± 0,20
(.457 ± .008)
W
L
F
Dimensions
Shell Size
DA
126
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
25,25 (.994)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
W
±0,368 (.0145)
6,693 (.2635)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JT Combo — High Power Straight
Receptacle
Part Numbers
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 257.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Clinch Nut
#4-40 UNC
DAJTE3W3S1-OL4
DAJTE3W3S6-OL4
DAJTE3W3S5-OL4
DAJTE3W3S9-OL4
Through Hole
DAJT3W3S1-OL4
DAJT3W3S6-OL4
DAJT3W3S5-OL4
DAJT3W3S9-OL4
Clinch Nut
M3
DAJTX3W3S1-OL4
DAJTX3W3S6-OL4
DAJTX3W3S5-OL4
DAJTX3W3S9-OL4
Note: For performance class 1 add -A190. Example: DAJT3W3S6-OL4-A190
Part Numbers — Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Clinch Nut
#4-40 UNC
DAJTE3WK3S1-OL4
DAJTE3WK3S6-OL4
DAJTE3WK3S5-OL4
DAJTE3WK3S9-OL4
Through Hole
DAJT3WK3S1-OL4
DAJT3WK3S6-OL4
DAJT3WK3S5-OL4
DAJT3WK3S9-OL4
Clinch Nut
M3
DAJTX3WK3S1-OL4
DAJTX3WK3S6-OL4
DAJTX3WK3S5-OL4
DAJTX3WK3S9-OL4
Note: For performance class 1 add -A190. Example: DAJT3WK3S-OL4-A190
For electrical data, see page 107.
Engaging Face
Keyed Configuration
Engaging Face
A
A
C
C
B
10°
A3
Ø 3,05 (.120)
A1
E
B
10°
A3
D
Ø 3,05 (.120)
A1
D
E
Ø 2,60 (.102)
11,70 ± 0,20
(.461 ± .008)
F
L
W
Dimensions
Shell Size
DA
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
24,66 (.971)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
127
D Subminiature
Filter D
D*JT Combo — High Power Solder Cup
Plug
Part Numbers
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Through Hole
DAJT3W3P1
DAJT3W3P6
DAJT3W3P5
DAJT3W3P9
Clinch Nut
#4-40 UNC
DAJTE3W3P1
DAJTE3W3P6
DAJTE3W3P5
DAJTE3W3P9
Clinch Nut
M3
DAJTX3W3P1
DAJTX3W3P6
DAJTX3W3P5
DAJTX3W3P9
Clinch Nut
#4-40 UNC
DAJTE3WK3P1
DAJTE3WK3P6
DAJTE3WK3P5
DAJTE3WK3P9
Clinch Nut
M3
DAJTX3WK3P1
DAJTX3WK3P6
DAJTX3WK3P5
DAJTX3WK3P9
Note: For performance class 1 add -A190. Example: DAJT3W3P6-A190
Part Numbers – Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Through Hole
DAJT3WK3P1
DAJT3WK3P6
DAJT3WK3P5
DAJT3WK3P9
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-A190
For electrical data, see page 107.
Keyed Configuration
Engaging Face
Engaging Face
A
A
C
B
10°
A1
C
Ø 3,05
(.120)
A3
E
Ø 3,05
(.120)
B
10°
A1
A3
E
D
D
Ø 3,63 (.143)
15,80 ± 0,50
(.622 ± .011)
W
L
F
Dimensions
Shell Size
DA
128
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
25,25 (.994)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
W
±0,368 (.0145)
6,693 (.2635)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Filter D
D*JT Combo — High Power Solder Cup
Part Numbers
Receptacle
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Through Hole
DAJT3W3S1
DAJT3W3S6
DAJT3W3S5
DAJT3W3S9
Clinch Nut
#4-40 UNC
DAJTE3W3S1
DAJTE3W3S6
DAJTE3W3S5
DAJTE3W3S9
Clinch Nut
M3
DAJTX3W3S1
DAJTX3W3S6
DAJTX3W3S5
DAJTX3W3S9
Clinch Nut
#4-40 UNC
DAJTE3WK3S1
DAJTE3WK3S6
DAJTE3WK3S5
DAJTE3WK3S9
Clinch Nut
M3
DAJTX3WK3S1
DAJTX3WK3S6
DAJTX3WK3S5
DAJTX3WK3S9
Note: For performance class 1 add -A190. Example: DAJT3W3S6-A190
Part Numbers — Keyed Configuration
Filter
Capacitance
1000 pF
1500 pF
5000 pF
47000 pF
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Through Hole
DAJT3WK3S1
DAJT3WK3S6
DAJT3WK3S5
DAJT3WK3S9
Note: For performance class 1 add -A190. Example: DAJT3WK3S6-A190
For electrical data, see page 107.
Keyed Configuration
Engaging Face
Engaging Face
A
A
C
C
B
10°
B
10°
Ø 3,05 (.120)
Ø 3,05 (.120)
A3
A3
A1
A1
D
E
D
E
Ø 3,63 (.143)
15,90 ± 0,50
(.626 ± .011)
F
L
W
Dimensions
Shell Size
DA
A
±0,38 (.015)
39,14 (1.541)
B
±0,13 (.005)
24,66 (.971)
C
±0,13 (.005)
33,32 (1.312)
D
±0,13 (.005)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
129
D Subminiature
Selection Index
Military/High Reliability
Page
Military/High Reliability
An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Standard Layout
90° PC Tail with Plastic Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
90° PC Tail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Straight PC Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Wrap Post Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Solder Cup Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
MIL-C-24308 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
MIL-C-39028 Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
HE501/D*M Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
MIL-24308 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Combo D PCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option)
Coaxial 90° (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Coaxial 90° (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Coaxial Straight (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Coaxial Straight (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Combo D PCB Connectors with High Power Contacts
40 A High Power 90° (Sizes DE-DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
40 A High Power 90° (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
40 A High Power Straight (Sizes DE-DC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
40 A High Power Straight (Size DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Combo D PCB Connectors with High Voltage Contacts
High Voltage Straight (Sizes DE-DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
High Voltage Straight (Size DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Combo D PCB Connectors with (Size 20) Signal Contacts Only
Cable Solder Cup (Sizes DE-DD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
130
Dimensions are shown in mm (inch)
Dimensions subject to change
D S ubm i n i atur e
M i l i tar y/H i gh R el i abi l i ty
I
TT Cannon Military/High Reliability D
Subminiature connectors are used in many
applications, including aerospace,
transportation, communication systems,
information systems and test equipment. Being the
inventor of the D Subminiature connector,
ITT Cannon is able to use its extensive design
expertise and high quality manufacturing
processes to insure the optimum performance and
reliability.
The D Subminiature connectors with fixed
contacts in solder cup, straight and 90° PC contact
terminations are qualified to MIL-C-24308 (see
cross reference, pages 142-143). These highreliability D Subminiature connectors are the finest
quality connectors available at the most
competitive prices in the market.
Applications:
Aerospace
Transportation
Communication Systems
Information Systems
Test Equipment
Product Features
Suitable for a variety of cable and printed
circuit board options
Solder cup version accommodates wire size
20 AWG maximum
5 A standard current rating
Clinch Nut and Float Mount Options
Specifications
Temperature Rating − 55°C to 125°C
Signal Contact Current Rating 7.5 A current capacity
Signal Contact Resistance
Coaxial VSWR
Coaxial Insertion Loss
55 millivolt max. at 7.5 test current
Signal Contact
Dielectric Withstanding Voltage 1250 VAC at Sea Level
Coaxial Current Rating 5 A
Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level
Coaxial Impedance
High Power Current Rating
High Power
Dielectric Withstanding Voltage
High Voltage Current Rating
High Voltage Contact
Dielectric Withstanding Voltage
75 or 50
Less than 1.30+ .03F for F up to 500 MHz
.3dB loss at 500 MHz
Up to 40 A
1000 VAC at Sea Level
5A
2800 V at Sea Level
Materials and Finishes
Des cription
S hell
Material
S teel
Ins ulator
Contacts (Military)
Contacts (Commercial)
Dual Float Mount Hardware
Clinch Nut Hardware
S tandoff
Plastic Bracket
Metal Bracket
Polyes ter, UL 94V-0, Color: Green
Copper Alloy
Copper Alloy
Stainless Steel
Stainless Steel with plastic insert
S teel
Thermoplastic, UL 94V-0
S teel
Finis h/Treatment
Yellow Chromate over Zinc
(Cadmium available upon request; order code -A101)
None
50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance
Gold over Nickel on mating area, Tin on balance
Passivated
Passivated
Trivalent Chromate over Zinc
None
Zinc ( Tin if boardlocks are attached)
Coaxial/High Power/High Voltage Contact Assemblies
Contacts and Outer Shells
Ring, Retaining
Ins ulator ( Coaxial Only)
Insulator (High Voltage Only)
Copper Alloy
Copper Alloy
Teflon
Thermoplastic
Gold over Nickel
Nickel
None
None
Dimensions are shown in mm (inch)
Dimensions subject to change131
D Subminiature
Military/High Reliability
90° PC Tail with Plastic Bracket
Plug
Part Numbers
Military Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9PD
DAMM15PD
DBMM25PD
DCMM37PD
DDMM50PD
XY
0,76 (.030)
X
4,01 (.158)
DEMM9PL
DAMM15PL
DBMM25PL
DCMM37PL
DDMM50PL
X
3,23 (.127)
DEM9PD
DAM15PD
DBM25PD
DCM37PD
DDM50PD
XY
0,76 (.030)
X
4,01 (.158)
DEM9PL
DAM15PL
DBM25PL
DCM37PL
DDM50PL
X
4,65 (.183)
DEMM9PS
DAMM15PS
DBMM25PS
DCMM37PS
DDMM50PS
X
3,23 (.127)
DEMM9PA
DAMM15PA
DBMM25PA
DCMM37PA
DDMM50PA
XY
1,02 (.040)
X
4,01 (.158)
DEMM9PG
DAMM15PG
DBMM25PG
DCMM37PG
DDMM50PG
X
4,65 (.183)
DEMM9PW
DAMM15PW
DBMM25PW
DCMM37PW
DDMM50PW
XY
1,02 (.040)
X
4,01 (.158)
DEM9PG
DAM15PG
DBM25PG
DCM37PG
DDM50PG
X
4,65 (.183)
DEM9PW
DAM15PW
DBM25PW
DCM37PW
DDM50PW
Commercial Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
4,65 (.183)
DEM9PS
DAM15PS
DBM25PS
DCM37PS
DDM50PS
X
3,23 (.127)
DEM9PA
DAM15PA
DBM25PA
DCM37PA
DDM50PA
DD Configuration
Engaging Face
2,84
(.112)
A
X ± 0,69 (.027)
5,68
(.224)
C
B
E
D
7,18 ± 0,25
(.283 ± .010)
10°
ØY
Ø 3,05
(.120)
M
L
2,84
(.112)
X ± 0,69 (.027)
N
7,18 ± 0,25
(.283 ± .010)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
132
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016)
10,72 (.422) 6,693 (.2635)
—
10,72 (.422) 6,693 (.2635)
—
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
M
±0,25 (.010)
12,30 (.484)
12,30 (.484)
12,30 (.484)
12,30 (.484)
15,09 (.594)
N
±0,13 (.005)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,04 (.395)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
90° PC Tail with Plastic Bracket
Receptacle
Part Numbers
Military Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9SD
DAMM15SD
DBMM25SD
DCMM37SD
DDMM50SD
XY
0,76 (.030)
X
4,01 (.158)
DEMM9SL
DAMM15SL
DBMM25SL
DCMM37SL
DDMM50SL
X
3,23 (.127)
DEM9SD
DAM15SD
DBM25SD
DCM37SD
DDM50SD
XY
0,76 (.030)
X
4,01 (.158)
DEM9SL
DAM15SL
DBM25SL
DCM37SL
DDM50SL
X
4,65 (.183)
DEMM9SS
DAMM15SS
DBMM25SS
DCMM37SS
DDMM50SS
X
3,23 (.127)
DEMM9SA
DAMM15SA
DBMM25SA
DCMM37SA
DDMM50SA
XY
1,02 (.040)
X
4,01 (.158)
DEMM9SG
DAMM15SG
DBMM25SG
DCMM37SG
DDMM50SG
X
4,65 (.183)
DEMM9SW
DAMM15SW
DBMM25SW
DCMM37SW
DDMM50SW
XY
1,02 (.040)
X
4,01 (.158)
DEM9SG
DAM15SG
DBM25SG
DCM37SG
DDM50SG
X
4,65 (.183)
DEM9SW
DAM15SW
DBM25SW
DCM37SW
DDM50SW
Commercial Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
4,65 (.183)
DEM9SS
DAM15SS
DBM25SS
DCM37SS
DDM50SS
X
3,23 (.127)
DEM9SA
DAM15SA
DBM25SA
DCM37SA
DDM50SA
DD Configuration
Engaging Face
A
2,84
(.112)
5,68
(.224)
C
B
X ± 0,69 (.027)
D
E
7,18 ± 0,25
(.283 ± .010)
10°
ØY
2,84
(.112)
X ± 0,69 (.027)
7,18 ± 0,25
(.283 ± .010)
W
Ø 3,05
(.120)
M
L
N
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
M
±0,25 (.010)
12,30 (.484)
12,30 (.484)
12,30 (.484)
12,30 (.484)
15,09 (.594)
N
±0,13 (.005)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,04 (.395)
Dimensions are shown in mm (inch)
Dimensions subject to change
133
D Subminiature
Military/High Reliability
90° PC Tail
Plug
Part Numbers
Military Part Numbers
Shell Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9PF
DAMM15PF
DBMM25PF
DCMM37PF
DDMM50PF
XY
0,76 (.030)
X
4,01 (.158)
DEMM9PP
DAMM15PP
DBMM25PP
DCMM37PP
DDMM50PP
X
3,23 (.127)
DEM9PF
DAM15PF
DBM25PF
DCM37PF
DDM50PF
XY
0,76 (.030)
X
4,01 (.158)
DEM9PP
DAM15PP
DBM25PP
DCM37PP
DDM50PP
XY
1,02 (.040)
X
4,65 (.183)
DEMM9PR
DAMM15PR
DBMM25PR
DCMM37PR
DDMM50PR
X
3,23 (.127)
DEMM9PC
DAMM15PC
DBMM25PC
DCMM37PC
DDMM50PC
X
4,01 (.158)
DEMM9PK
DAMM15PK
DBMM25PK
DCMM37PK
DDMM50PK
Commercial Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Engaging Face
XY
1,02 (.040)
X
4,65 (.183)
DEM9PR
DAM15PR
DBM25PR
DCM37PR
DDM50PR
X
3,23 (.127)
DEM9PC
DAM15PC
DBM25PC
DCM37PC
DCM50PC
X
4,01 (.158)
DEM9PK
DAM15PK
DBM25PK
DCM37PK
DDM50PK
DD Configuration
2,84
(.112)
A
X ± 0,69 (.027)
5,68
(.224)
C
B
Ø 3,05 (.120)
D
E
K
7,18 ± 0,25
(.283 ± .010)
10°
L
ØY
2,84
(.112)
7,18 ± 0,25
(.283 ± .010)
X ± 0,69 (.027)
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
134
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
90° PC Tail
Receptacle
Part Numbers
Military Part Numbers
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9SF
DAMM15SF
DBMM25SF
DCMM37SF
DDMM50SF
XY
0,76 (.030)
X
4,01 (.158)
DEMM9SP
DAMM15SP
DBMM25SP
DCMM37SP
DDMM50SP
X
3,23 (.127)
DEM9SF
DAM15SF
DBM25SF
DCM37SF
DDM50SF
XY
0,76 (.030)
X
4,01 (.158)
DEM9SP
DAM15SP
DBM25SP
DCM37SP
DDM50SP
XY
1,02 (.040)
X
4,65 (.183)
DEMM9SR
DAMM15SR
DBMM25SR
DCMM37SR
DDMM50SR
X
3,23 (.127)
DEMM9SC
DAMM15SC
DBMM25SC
DCMM37SC
DDMM50SC
X
4,01 (.158)
DEMM9SK
DAMM15SK
DBMM25SK
DCMM37SK
DDMM50SK
Commercial Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
ɀ For hardware view (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
XY
1,02 (.040)
X
4,65 (.183)
DEM9SR
DAM15SR
DBM25SR
DCM37SR
DDM50SR
X
3,23 (.127)
DEM9SC
DAM15SC
DBM25SC
DCM37SC
DDM50SC
X
4,01 (.158)
DEM9SK
DAM15SK
DBM25SK
DCM37SK
DDM50SK
DD Configuration
Engaging Face
A
2,84
(.112)
5,68
(.224)
C
Ø 3,05 (.120)
B
X ± 0,69 (.027)
K
D
E
7,18 ± 0,25
(.283 ± .010)
10°
L
ØY
2,84
(.112)
X ± 0,69 (.027)
7,18 ± 0,25
(.283 ± .010)
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0.13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
135
D Subminiature
Military/High Reliability
Straight PC Tail
Plug
Part Numbers
Military Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9PE*
DAMM15PE*
DBMM25PE*
DCMM37PE*
DDMM50PE*
XY
0,76 (.030)
X
4,01 (.158)
DEMM9PM*
DAMM15PM*
DBMM25PM*
DCMM37PM*
DDMM50PM*
X
4,65 (.183)
DEMM9PZ*
DAMM15PZ*
DBMM25PZ*
DCMM37PZ*
DDMM50PZ*
X
3,23 (.127)
DEMM9PB
DAMM15PB
DBMM25PB
DCMM37PB
DDMM50PB
XY
1,02 (.040)
X
4,01 (.158)
DEMM9PH
DAMM15PH
DBMM25PH
DCMM37PH
DDMM50PH
X
4,65 (.183)
DEMM9PX*
DAMM15PX*
DBMM25PX*
DCMM37PX*
DDMM50PX*
XY
1,02 (.040)
X
4,01 (.158)
DEM9PH
DAM15PH
DBM25PH
DCM37PH
DDM50PH
X
4,65 (.183)
DEM9PX
DAM15PX
DBM25PX
DCM37PX
DDM50PX
Note: Spacers (shipped loose) provided only on parts marked *
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Commercial Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
3,23 (.127)
DEM9PE
DAM15PE
DBM25PE
DCM37PE
DDM50PE
XY
0,76 (.030)
X
4,01 (.158)
DEM9PM
DAM15PM
DBM25PM
DCM37PM
DDM50PM
X
4,65 (.183)
DEM9PZ
DAM15PZ
DBM25PZ
DCM37PZ
DDM50PZ
X
3,23 (.127)
DEM9PB
DAM15PB
DBM25PB
DCM37PB
DDM50PB
Engaging Face
DD Configuration
A
5,69
(.224)
C
B
Ø 3,05
(.120)
2,84
(.112)
K
E
D
L
10°
SPACER (SHIPPED LOOSE)
FOR REFERENCE ONLY
ØY
X ± 0,69 (.027)
6,86
(.270)
Dimensions
Shell Size
DE
DA
DB
DC
DD
136
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (0.39)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Straight PC Tail
Receptacle
Part Numbers
Military Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
X
3,23 (.127)
DEMM9SE*
DAMM15SE*
DBMM25SE*
DCMM37SE*
DDMM50SE*
XY
0,76 (.030)
X
4,01 (.158)
DEMM9SM*
DAMM15SM*
DBMM25SM*
DCMM37SM*
DDMM50SM*
X
4,65 (.183)
DEMM9SZ*
DAMM15SZ*
DBMM25SZ*
DCMM37SZ*
DDMM50SZ*
X
3,23 (.127)
DEMM9SB
DAMM15SB
DBMM25SB
DCMM37SB
DDMM50SB
XY
1,02 (.040)
X
4,01 (.158)
DEMM9SH
DAMM15SH
DBMM25SH
DCMM37SH
DDMM50SH
X
4,65 (.183)
DEMM9SX*
DAMM15SX*
DBMM25SX*
DCMM37SX*
DDMM50SX*
XY
1,02 (.040)
X
4,01 (.158)
DEM9SH
DAM15SH
DBM25SH
DCM37SH
DDM50SH
X
4,65 (.183)
DEM9SX
DAM15SX
DBM25SX
DCM37SX
DDM50SX
Note: Spacers (shipped loose) provided only on parts marked *
Commercial Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
X
3,23 (.127)
DEM9SE
DAM15SE
DBM25SE
DCM37SE
DDM50SE
XY
0,76 (.030)
X
4,01 (.158)
DEM9SM
DAM15SM
DBM25SM
DCM37SM
DDM50SM
X
4,65 (.183)
DEM9SZ
DAM15SZ
DBM25SZ
DCM37SZ
DDM50SZ
X
3,23 (.127)
DEM9SB
DAM15SB
DBM25SB
DCM37SB
DDM50SB
DD Configuration
5,69
(.224)
Engaging Face
2,84
(.112)
A
C
Ø 3,05
(.120)
B
K
D
E
L
10°
SPACER (SHIPPED LOOSE)
FOR REFERENCE ONLY
2,84
(.112)
ØY
X ± 0,69 (.027)
6,86
(.270)
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
137
D Subminiature
Military/High Reliability
Wrap Post Connector
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Military Part Numbers
DEMM9PF179
DEMM9PF179A
DAMM15PF179
DAMM15PF179A
DBMM25PF179
DBMM25PF179A
DCMM37PF179
DCMM37PF179A
DDMM50PF179
DDMM50PF179A
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Commercial Part Numbers
DEM9PF179
DEM9PF179A
DAM15PF179
DAM15PF179A
DBM25PF179
DBM25PF179A
DCM37PF179
DCM37PF179A
DDM50PF179
DDM50PF179A
Modification Code
F179
F179A
Number of
Wraps
2
3
X
±0,51 (.020)
9,60 (.378)
12,90 (.508)
DD Configuration
5,69
(.224)
Engaging Face
2,84
(.112)
A
C
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84
(.112)
0,61 (.024)
X
5,99 ± 0,38
(.236 ± .015)
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
138
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Wrap Post Connector
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 274.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Military Part Numbers
DEMM9SF179
DEMM9SF179A
DAMM15SF179
DAMM15SF179A
DBMM25SF179
DBMM25SF179A
DCMM37SF179
DCMM37SF179A
DDMM50SF179
DDMM50SF179A
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Commercial Part Numbers
DEM9SF179
DEM9SF179A
DAM15SF179
DAM15SF179A
DBM25SF179
DBM25SF179A
DCM37SF179
DCM37SF179A
DDM50SF179
DDM50SF179A
Modification
Code
F179
F179A
Number of
Wraps
2
3
X
±0,51 (.020)
9,60 (.378)
12,90 (.508)
DD Configuration
5,69
(.224)
2,84
(.112)
Engaging Face
A
C
B
Ø 3,05 (.120)
K
D
E
L
10°
2,84
(.112)
0,61 (.024)
X
F
5,99 ± 0,38
(.236 ± .015)
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
139
D Subminiature
Military/High Reliability
Solder Cup Connector
Plug
Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Shell
Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
Engaging Face
Through Hole
DEMM9P
DAMM15P
DBMM25P
DCMM37P
DDMM50P
Military Part Numbers
Dual
Float Mount
DEMMY9P
DAMMY15P
DBMMY25P
DCMMY37P
DDMMY50P
Clinch Nut
#4-40 UNC
DEMME9P
DAMME15P
DBMME25P
DCMME37P
DDMME50P
Through Hole
DEM9P
DAM15P
DBM25P
DCM37P
DDM50P
Commercial Part Numbers
Dual
Float Mount
DEMY9P
DAMY15P
DBMY25P
DCMY37P
DDMY50P
Clinch Nut
#4-40 UNC
DEME9P
DAME15P
DBME25P
DCME37P
DDME50P
DD Configuration
5,69
(.224)
A
C
Ø 3,05
(.120)
B
2,84
(.112)
K
E
D
L
10°
10,72 (.422)
MAX
2,84
(.112)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
140
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0.76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Solder Cup Connector
Receptacle
Part Numbers
Shell
Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Through Hole
DEMM9S
DAMM15S
DBMM25S
DCMM37S
DDMM50S
Military Part Numbers
Dual
Float Mount
DEMMY9S
DAMMY15S
DBMMY25S
DCMMY37S
DDMMY50S
Clinch Nut
#4-40 UNC
DEMME9S
DAMME15S
DBMME25S
DCMME37S
DDMME50S
Through Hole
DEM9S
DAM15S
DBM25S
DCM37S
DDM50S
Commercial Part Numbers
Dual
Float Mount
DEMY9S
DAMY15S
DBMY25S
DCMY37S
DDMY50S
Clinch Nut
#4-40 UNC
DEME9S
DAME15S
DBME25S
DCME37S
DDME50S
Engaging Face
DD Configuration
5,69
(.224)
A
C
2,84
(.112)
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84
(.112)
9,91 (.390)
MAX
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
141
D Subminiature
Military/High Reliability
MIL-C-24308 Cross Reference
Military
Part Number
M24308/1-1
M24308/1-2
M24308/1-3
M24308/1-4
M24308/1-5
M24308/1-12
M24308/1-13
M24308/1-14
M24308/1-15
M24308/1-16
M24308/1-23
M24308/1-24
M24308/1-25
M24308/1-26
M24308/1-27
M24308/2-1
M24308/2-2
M24308/2-3
M24308/2-4
M24308/2-5
M24308/2-6
M24308/2-7
M24308/2-8
M24308/2-9
M24308/2-10
M24308/2-23
M24308/2-24
M24308/2-25
M24308/2-26
M24308/2-27
M24308/2-34
M24308/2-35
M24308/2-36
M24308/2-37
M24308/2-38
M24308/2-281
M24308/2-282
M24308/2-283
M24308/2-284
M24308/2-285
M24308/2-292
M24308/2-293
M24308/2-294
M24308/2-295
M24308/2-296
M24308/2-335
M24308/2-336
M24308/2-341
M24308/2-342
M24308/2-343
M24308/2-344
M24308/2-345
M24308/2-346
M24308/2-353
M24308/2-354
M24308/2-355
M24308/2-356
M24308/2-357
M24308/2-482
M24308/2-483
M24308/2-484
M24308/2-485
M24308/2-486
M24308/3-1
M24308/3-2
142
ITT Cannon
Part Number
DEMM9S
DAMM15S
DBMM25S
DCMM37S
DDMM50S
DEMMF9S
DAMMF15S
DBMMF25S
DCMMF37S
DDMMF50S
DEMMY9S
DAMMY15S
DBMMY25S
DCMMY37S
DDMMY50S
DEMAM9S
DAMAM15S
DBMAM25S
DCMAM37S
DDMAM50S
DEMAMT9S
DAMAMT15S
DBMAMT25S
DCMAMT37S
DDMAMT50S
DEMAMF9S
DAMAMF15S
DBMAMF25S
DCMAMF37S
DDMAMF50S
DEMAMFT9S
DAMAMFT15S
DBMAMFT25S
DCMAMFT37S
DDMAMFT50S
DEMAM9S-FO
DAMAM15S-FO
DBMAM25S-FO
DCMAM37S-FO
DDMAM50S-FO
DEMAMF9S-FO
DAMAMF15S-FO
DBMAMF25S-FO
DCMAMF37S-FO
DDMAMF50S-FO
DBMAMR25S
DCMAMR37S
DAMAMR15S
DEMAMY9S
DAMAMY15S
DBMAMY25S
DCMAMY37S
DDMAMY50S
DEMAMYT9S
DAMAMYT15S
DBMAMYT25S
DCMAMYT37S
DDMAMYT50S
DEMAMY9S-FO
DEMAMY15S-FO
DEMAMY25S-FO
DCMAMY37S-FO
DDMAMY50S-FO
DEMM9P
DAMM15P
Military
Part Number
M24308/3-3
M24308/3-4
M24308/3-5
M24308/3-12
M24308/3-13
M24308/3-14
M24308/3-15
M24308/3-16
M24308/4-1
M24308/4-2
M24308/4-3
M24308/4-4
M24308/4-5
M24308/4-6
M24308/4-7
M24308/4-8
M24308/4-9
M24308/4-10
M24308/4-259
M24308/4-260
M24308/4-261
M24308/4-262
M24308/4-263
M24308/4-302
M24308/4-303
M24308/4-304
M24308/4-305
M24308/4-306
M24308/4-313
M24308/4-314
M24308/4-315
M24308/4-316
M24308/4-317
M24308/4-324
M24308/4-325
M24308/4-326
M24308/4-327
M24308/4-328
M24308/5-1
M24308/5-2
M24308/5-3
M24308/5-4
M24308/5-5
M24308/5-12
M24308/5-13
M24308/5-14
M24308/5-15
M24308/5-16
M24308/5-23
M24308/5-24
M24308/5-25
M24308/5-26
M24308/5-27
M24308/6-1
M24308/6-2
M24308/6-3
M24308/6-4
M24308/6-5
M24308/6-6
M24308/6-7
M24308/6-8
M24308/6-9
M24308/6-10
M24308/6-259
M24308/6-260
ITT Cannon
Part Number
DBMM25P
DCMM37P
DDMM50P
DEMMF9P
DAMMF15P
DBMMF25P
DCMMF37P
DDMMF50P
DEMAM9P
DAMAM15P
DBMAM25P
DCMAM37P
DDMAM50P
DEMAMT9P
DAMAMT15P
DBMAMT25P
DCMAMT37P
DDMAMT50P
DEMAM9P-FO
DAMAM15P-FO
DBMAMF25P-FO
DCMAM37P-FO
DDMAM50P-FO
DEMAMF9P
DAMAMF15P
DBMAMF25P
DCMAMF37P
DDMAMF50P
DEMAMFT9P
DAMAMFT15P
DBMAMFT25P
DCMAMFT37P
DDMAMFT50P
DEMAMF9P-FO
DAMAMF15P-FO
DBMAMF25P-FO
DCMAMF37P-FO
DDMAMF50P-FO
DEMM9SNM
DAMM15SNM
DBMM25SNM
DCMM37SNM
DDMM50SNM
DEMMF9SNM
DAMMF15SNM
DBMMF25SNM
DCMMF37SNM
DDMMF50SNM
DDMMY9SNM
DAMMY15SNM
DBMMY25SNM
DCMMY37SNM
DDMMY50SNM
DEMAM9SNM
DAMAM15SNM
DBMAM25SNM
DCMAM37SNM
DDMAM50SNM
DEMAMT9SNM
DAMAMT15SNM
DBMAMT25SNM
DCMAMT37SNM
DDMAMT50SNM
DEMAMF9SNM
DAMAMF15SNM
Military
Part Number
M24308/6-261
M24308/6-262
M24308/6-263
M24308/6-270
M24308/6-271
M24308/6-272
M24308/6-273
M24308/6-274
M24308/6-281
M24308/6-282
M24308/6-283
M24308/6-284
M24308/6-285
M24308/6-324
M24308/6-325
M24308/6-326
M24308/6-327
M24308/6-328
M24308/6-453
M24308/6-454
M24308/6-455
M24308/6-456
M24308/6-457
M24308/6-464
M24308/6-465
M24308/6-466
M24308/6-467
M24308/6-468
M24308/6-491
M24308/6-492
M24308/6-493
M24308/6-494
M24308/6-495
M24308/7-1
M24308/7-2
M24308/7-3
M24308/7-4
M24308/7-5
M24308/7-12
M24308/7-13
M24308/7-14
M24308/7-15
M24308/7-16
M24308/8-1
M24308/8-2
M24308/8-3
M24308/8-4
M24308/8-5
M24308/8-6
M24308/8-7
M24308/8-8
M24308/8-9
M24308/8-10
M24308/8-259
M24308/8-260
M24308/8-261
M24308/8-262
M24308/8-263
M24308/8-302
M24308/8-303
M24308/8-304
M24308/8-305
M24308/8-306
M24308/8-313
M24308/8-314
ITT Cannon
Part Number
DBMAMF25SNM
DCMAMF37SNM
DDMAMF50SNM
DEMAMFT9SNM
DAMAMFT15SNM
DBMAMFT25SNM
DCMAMFT37SNM
DDMAMFT50SNM
DEMAM9SNM-FO
DAMAM15SNM-FO
DBMAM25SNM-FO
DCMAM37SNM-FO
DDMAM50SNM-FO
DEMAMF9SNM-FO
DAMAMF15SNM-FO
DBMAMF25SNM-FO
DCMAMF37SNM-FO
DDMAMF50SNM-FO
DEMAMY9SNM
DAMAMY15SNM
DBMAMY25SNM
DCMAMY37SNM
DDMAMY50SNM
DDMEMYT9SNM
DAMAMYT15SNM
DBMAMYT25SNM
DCMAMYT37SNM
DDMAMYT50SNM
DEMAMY9SNM-FO
DAMAMY15SNM-FO
DBMAMY25SNM-FO
DCMAMY37SNM-FO
DDMAMY50SNM-FO
DEMM9PNM
DAMM15PNM
DBMM25PNM
DCMM37PNM
DDMM50PNM
DEMMF9PNM
DAMMF15PNM
DBMMF25PNM
DCMMF37PNM
DDMMF50PNM
DEMAM9PNM
DAMAM15PNM
DBMAM25PNM
DCMAM37PNM
DDMAM50PNM
DEMAMT9PNM
DAMAMT15PNM
DBMAMT25PNM
DCMAMT37PNM
DDMAMT50PNM
DEMAM9PNM-FO
DAMAM15PNM-FO
DBMAM25PNM-FO
DCMAM37PNM-FO
DDMAM50PNM-FO
DEMAMF9PNM
DAMAMF15PNM
DBMAMF25PNM
DCMAMF37PNM
DDMAMF50PNM
DEMAMFT9PNM
DAMAMFT15PNM
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
MIL-C-24308 Cross Reference
Military
Part Number
M24308/8-315
M24308/8-316
M24308/8-317
M24308/8-324
M24308/8-325
M24308/8-326
M24308/8-327
M24308/8-328
M24308/9-1
M24308/9-2
M24308/9-3
M24308/9-4
M24308/9-5
M24308/9-6
M24308/9-7
M24308/9-8
M24308/9-9
M24308/9-10
M24308/9-11
M24308/9-12
M24308/9-13
M24308/9-14
M24308/9-15
M24308/9-16
M24308/9-17
M24308/9-18
M24308/9-19
M24308/9-20
M24308/23-1
M24308/23-2
M24308/23-3
M24308/23-4
M24308/23-5
M24308/23-7
M24308/23-8
M24308/23-9
M24308/23-10
M24308/23-11
M24308/23-13
M24308/23-14
M24308/23-15
M24308/23-16
M24308/23-17
M24308/23-19
M24308/23-20
ITT Cannon
Part Number
DBMAMFT25PNM
DCMAMFT37PNM
DDMAMFT50PNM
DEMAMF9PNM-FO
DAMAMF15PNM-FO
DBMAMF25PNM-FO
DCMAMF37PNM-FO
DDMAMF50PNM-FO
DEH9P002
DAH15P002
DBH25P002
DCH37P002
DDH50P002
DEH9P001
DAH15P001
DBH25P001
DCH37P001
DDH50P001
DEH9P202
DAH15P202
DBH25P202
DCH37P202
DDH50P202
DEH9P201
DAH15P201
DBH25P201
DCH37P201
DDH50P201
DEMM9SM
DAMM15SM
DBMM25SM
DCMM37SM
DDMM50SM
DEMM9SZ
DAMM15SZ
DBMM25SZ
DCMM37SZ
DDMM50SZ
DEMM9SH
DAMM15SH
DBMM25SH
DCMM37SH
DDMM50SH
DEMM9SX
DAMM15SX
Military
Part Number
M24308/23-21
M24308/23-22
M24308/23-23
M24308/23-25
M24308/23-26
M24308/23-27
M24308/23-28
M24308/23-29
M24308/23-31
M24308/23-32
M24308/23-33
M24308/23-34
M24308/23-35
M24308/23-37
M24308/23-38
M24308/23-39
M24308/23-40
M24308/23-41
M24308/23-43
M24308/23-44
M24308/23-45
M24308/23-46
M24308/23-47
M24308/23-49
M24308/23-50
M24308/23-51
M24308/23-52
M24308/23-53
M24308/23-55
M24308/23-56
M24308/23-57
M24308/23-58
M24308/23-59
M24308/24-1
M24308/24-2
M24308/24-3
M24308/24-4
M24308/24-5
M24308/24-7
M24308/24-8
M24308/24-9
M24308/24-10
M24308/24-11
M24308/24-13
M24308/24-14
ITT Cannon
Part Number
DBMM25SX
DCMM37SX
DDMM50SX
DEMM9SD
DAMM15SD
DBMM25SD
DCMM37SD
DDMM50SD
DEMM9SL
DAMM15SL
DBMM25SL
DCMM37SL
DDMM50SL
DEMM9SA
DAMM15SA
DBMM25SA
DCMM37SA
DDMM50SA
DEMM9SG
DAMM15SG
DBMM25SG
DCMM37SG
DDMM50SG
DEMM9SS
DAMM15SS
DBMM25SS
DCMM37SS
DDMM50SS
DEMM9SW
DAMM15SW
DBMM25SW
DCMM37SW
DDMM50SW
DEMM9PM
DAMM15PM
DBMM25PM
DCMM37PM
DDMM50PM
DEMM9PZ
DAMM15PZ
DBMM25PZ
DCMM37PZ
DDMM50PZ
DEMM9PH
DAMM15PH
Military
Part Number
M24308/24-15
M24308/24-16
M24308/24-17
M24308/24-19
M24308/24-20
M24308/24-21
M24308/24-22
M24308/24-23
M24308/24-25
M24308/24-26
M24308/24-27
M24308/24-28
M24308/24-29
M24308/24-31
M24308/24-32
M24308/24-33
M24308/24-34
M24308/24-35
M24308/24-37
M24308/24-38
M24308/24-39
M24308/24-40
M24308/24-41
M24308/24-43
M24308/24-44
M24308/24-45
M24308/24-46
M24308/24-47
M24308/24-49
M24308/24-50
M24308/24-51
M24308/24-52
M24308/24-53
M24308/24-55
M24308/24-56
M24308/24-57
M24308/24-58
M24308/24-59
M24308/26-1
M24308/26-2
ITT Cannon
Part Number
DBMM25PH
DCMM37PH
DDMM50PH
DEMM9PX
DAMM15PX
DBMM25PX
DCMM37PX
DDMM50PX
DEMM9PD
DAMM15PD
DBMM25PD
DCMM37PD
DDMM50PD
DEMM9PL
DAMM15PL
DBMM25PL
DCMM37PL
DDMM50PL
DEMM9PA
DAMM15PA
DBMM25PA
DCMM37PA
DDMM50PA
DEMM9PG
DAMM15PG
DBMM25PG
DCMM37PG
DDMM50PG
DEMM9PS
DAMM15PS
DBMM25PS
DCMM37PS
DDMM50PS
DEMM9PW
DAMM15PW
DBMM25PW
DCMM37PW
DDMM50PW
D20418-2
D20418-39
Contact Size
20
20
Contact Style
Socket
Pin
Product Line
D*MA
D*MA
MIL Specification
MIL-C-24308
MIL-C-24308
MIL-C-39029 Crimp Contacts
Military
Part Number
M39029/63-368
M39029/64-369
ITT Cannon
Part Number
031-1007-078
330-5291-097
Dimensions are shown in mm (inch)
Dimensions subject to change
143
D Subminiature
Military/High Reliability
HE501/D*M Cross Reference
HE501
Part Number
HE501N09AS3
HE501N15AS3
HE501N25AS3
HE501N37AS3
HE501N50AS3
HE501F09AS3
HE501F15AS3
HE501F25AS3
HE501F37AS3
HE501F50AS3
HE501N09YS43
HE501N15YS43
HE501N25YS43
HE501N37YS43
HE501N50YS43
HE501P09VS63E
HE501P15VS63E
HE501P25VS63E
HE501P37VS63E
HE501P50VS63E
144
ITT Cannon
Part Number
DEM9S
DAM15S
DBM25S
DCM37S
DDM50S
DEMY9S
DAMY15S
DBMY25S
DCMY37S
DDMY50S
DEM9SOL3
DAM15SOL3
DBM25SOL3
DCM37SOL3
DDM50SOL3
DEM9S1A5N
DAM15SA15N
DBM25S1A5N
DCM37S1A5N
DDM50S1A5N
HE501
Part Number
HE501N9KS33
HE501N15KS33
HE501N25KS33
HE501N37KS33
HE501N50KS33
HE501N09AP
HE501N15AP
HE501N25AP
HE501N37AP
HE501N50AP
HE501F09AP
HE501F15AP
HE501F25AP
HE501F37AP
HE501F50AP
ITT Cannon
Part Number
DEM9SF179A
DAM15SF179A
DBM25SF179A
DCM37SF179A
DDM50SF179A
DEM9P
DAM15P
DBM25P
DCM37P
DDM50P
DEMY9P
DAMY15P
DBMY25P
DCMY37P
DDMY50P
HE501
Part Number
HE501N09YP4
HE501N15YP4
HE501N25YP4
HE501N37YP4
HE501N50YP4
HE501P09VP6E
HE501P15VP6E
HE501P25VP6E
HE501P37VP6E
HE501P50VP6E
HE501N9KP3
HE501N15KP3
HE501N25KP3
HE501N37KP3
HE501N50KP3
ITT Cannon
Part Number
DEM9POL3
DAM15POL3
DBM25POL3
DCM37POL3
DDM50POL3
DEM9P1A5N
DAM15P1A5N
DBM25P1A5N
DCM39P1A5N
DDM50P1A5N
DEM9PF179A
DAM15PF179A
DBM25PF179A
DCM37PF179A
DDM50PF179A
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Test Data
MIL-C-24308 Test Extracts Applicable To Class G Connectors
Test Description
Mating/Unmating Force
Contact Resistance
Test Requirements
Shell Size
Layout
Max Unmating (lbs.)
Max Mating (lbs.)
DE
9
6
10
DA
15
10
17
DB
25
17
28
DC
37
24
39
DD
50
30
49
Contacts shall be retained in their inserts by a 9 pound (minimum) force. The axial displacement of contacts shall not exceed .012 inch while under load.
After humidity 1 Megohm (min.)
All other conditions 5000 Megohm (min.)
After salt spray not to exceed 65 millivolts max.
Vibration
No damage and no loosening of parts due to vibration. No interruption of electrical continuity longer than 1 microsecond.
Shock
No damage and no loosening of parts. No interruption of electrical continuity longer than 1 microsecond.
Durability
No electrical or mechanical defects after 500 cycles of mating and unmating.
Salt Spray (Corrosion)
No exposure of base metal due to corrosion which will affect performance. Product will meet further tests as specified.
Fluid Immersion
20 hours immersion MIL-H-5606 Hydraulic Fluid.
20 hours immersion MIL-L-23699 Lubricating Fluid.
Connectors shall meet mating/unmating force following immersion.
Contact Retention
Insulation Resistance
MIL-STD-1344
Test Method
2013
2007
3003
3004
Size 20 AWG; 7.5 A
2005
Test Cond. 4
2004
Test Cond. E
2016
200 ± 100 cycles/hour
1001
Cond. B
1016
Dimensions are shown in mm (inch)
Dimensions subject to change
145
D Subminiature
Military/High Reliability
Coaxial 90° PCB (Sizes DE-DC)
Plug
75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 228-229.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMP5C1PJ
DAMMP7C2PJ
DAMMP11C1PJ
DAMMP3C3PJ
DAMMP3CK3PJTM
DBMMP5C5PJ
DBMMP9C4PJ
DBMMP13C3PJ
DBMMP17C2PJ
DBMMP21C1PJ
DCMMP8C8PJ
DCMMP13C6PJ
DCMMP17C5PJ
DCMMP21CA4PJ
DCMMP25C3PJ
DCMMP27C2PJ
Part Number
Without Screw Locks
With Boardlocks
DEMMC5C1PJ
DAMMC7C2PJ
DAMMC11C1PJ
DAMMC3C3PJ
DAMMC3CK3PJTM
DBMMC5C5PJ
DBMMC9C4PJ
DBMMC13C3PJ
DBMMC17C2PJ
DBMMC21C1PJ
DCMMC8C8PJ
DCMMC13C6PJ
DCMMC17C5PJ
DCMMC21CA4PJ
DCMMC25C3PJ
DCMMC27C2PJ
Part Number
With Screw Locks
With Boardlocks
DEMMG5C1PJ
DAMMG7C2PJ
DAMMG11C1PJ
DAMMG3C3PJ
DAMMG3CK3PJTM
DBMMG5C5PJ
DBMMG9C4PJ
DBMMG13C3PJ
DBMMG17C2PJ
DBMMG21C1PJ
DCMMG8C8PJ
DCMMG13C6PJ
DCMMG17C5PJ
DCMMG21CA4PJ
DCMMG25C3PJ
DCMMG27C2PJ
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1PJ
For DD shell size, see page 148.
ឮ Keyed
0,56
(.023)
Engaging Face
A
Ø 0,51
(.020)
2,54
(.100)
C
B
E
BOARDLOCK
3,89 (.153)
MIN
11,94 ± 0,33
(.470 ± .013)
D
L
2,92
(.115)
10°
Ø 0,76
(.030)
Part Number
With Screw Locks
Without Boardlocks
DEMMD5C1PJ
DAMMD7C2PJ
DAMMD11C1PJ
DAMMD3C3PJ
DAMMD3CK3PJTM
DBMMD5C5PJ
DBMMD9C4PJ
DBMMD13C3PJ
DBMMD17C2PJ
DBMMD21C1PJ
DCMMD8C8PJ
DCMMD13C6PJ
DCMMD17C5PJ
DCMMD21CA4PJ
DCMMD25C3PJ
DCMMD27C2PJ
Screw lock, boardlock, and signal contacts
removed for clarity
0,82
(.032)
2,84
(.112)
BRACKET,
METAL
12,34
(.486) 8,64
(.340)
RIVNUT
#4-40 UNC
4,33 ± 0,38
(.170 ± .015)
7,18 ± 0,25
(.283 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and coaxial contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
146
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Coaxial 90° PCB (Sizes DE-DC)
Receptacle
75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 231-232.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMP5C1SJ
DAMMP7C2SJ
DAMMP11C1SJ
DAMMP3C3SJ
DAMMP3CK3SJTM
DBMMP5C5SJ
DBMMP9C4SJ
DBMMP13C3SJ
DBMMP17C2SJ
DBMMP21C1SJ
DCMMP8C8SJ
DCMMP13C6SJ
DCMMP17C5SJ
DCMMP21CA4SJ
DCMMP25C3SJ
DCMMP27C2SJ
Part Number
Without Screw Locks
With Boardlocks
DEMMC5C1SJ
DAMMC7C2SJ
DAMMC11C1SJ
DAMMC3C3SJ
DAMMC3CK3SJTM
DBMMC5C5SJ
DBMMC9C4SJ
DBMMC13C3SJ
DBMMC17C2SJ
DBMMC21C1SJ
DCMMC8C8SJ
DCMMC13C6SJ
DCMMC17C5SJ
DCMMC21CA4SJ
DCMMC25C3SJ
DCMMC27C2SJ
Part Number
With Screw Locks
Without Boardlocks
DEMMD5C1SJ
DAMMD7C2SJ
DAMMD11C1SJ
DAMMD3C3SJ
DAMMD3CK3SJTM
DBMMD5C5SJ
DBMMD9C4SJ
DBMMD13C3SJ
DBMMD17C2SJ
DBMMD21C1SJ
DCMMD8C8SJ
DCMMD13C6SJ
DCMMD17C5SJ
DCMMD21CA4SJ
DCMMD25C3SJ
DCMMD27C2SJ
Part Number
With Screw Locks
With Boardlocks
DEMMG5C1SJ
DAMMG7C2SJ
DAMMG11C1SJ
DAMMG3C3SJ
DAMMG3CK3SJTM
DBMMG5C5SJ
DBMMG9C4SJ
DBMMG13C3SJ
DBMMG17C2SJ
DBMMG21C1SJ
DCMMG8C8SJ
DCMMG13C6SJ
DCMMG17C5SJ
DCMMG21CA4SJ
DCMMG25C3SJ
DCMMG27C2SJ
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1SJ
For DD shell size, see page 149.
ឮ Keyed
Engaging Face
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
A
C
B
11,94 ± 0,33
(.470 ± .013)
D
E
3,89 (.153)
MIN
L
10°
BOARDLOCK
2,92
(.115)
Ø 0,76
(.030)
0,79
(.031)
Screw lock, boardlock and signal contacts
removed for clarity
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
BRACKET,
METAL
12,34
(.486)
RIVNUT
#4-40 UNC
8,64
(.340)
7,18 ± 0,25
(.283 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock and coaxial contact
removed for clarity
Note: ɋ Dimension varies with altenate bracket configuration, see Reader’s Resource page 225.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47.04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
147
D Subminiature
Military/High Reliability
Coaxial 90° PCB (Size DD)
Plug
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMP24C7PJ
DDMMP36C4PJ
DDMMP43C2PJ
DDMMP47C1PJ
Part Number
Without Screw Locks
With Boardlocks
DDMMC24C7PJ
DDMMC36C4PJ
DDMMC43C2PJ
DDMMC47C1PJ
Part Number
With Screw Locks
Without Boardlocks
DDMMD24C7PJ
DDMMD36C4PJ
DDMMD43C2PJ
DDMMD47C1PJ
Part Number
With Screw Locks
With Boardlocks
DDMMG24C7PJ
DDMMG36C4PJ
DDMMG43C2PJ
DDMMG47C1PJ
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMP24X7PJ
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 230.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
SCREW LOCK
#4-40 UNC
W
11,53 ± 0,25
(.454 ± .010)
6,50 ± 0,25
(.256 ± .010)
F
10,06
(.396)
RIVNUT
#4-40 UNC
5,68
(.224)
13,74
(.541)
BRACKET,
METAL
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
Engaging Face
Screw lock, boardlock, and coaxial contact
removed for clarity
10°
L
E
2,54
(.100)
D
11,94 ± 0,33
(.470 ± .013)
Ø 0,51
(.020)
0,56
(.023)
0,82
(.032)
BOARDLOCK
3,89 (.153)
MIN
2,92
(.115)
Ø 0,76
(.030)
B
C
A
Screw lock, boardlock, and signal contacts
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DD
148
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Coaxial 90° PCB (Size DD)
Receptacle
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMP24C7SJ
DDMMP36C4SJ
DDMMP43C2SJ
DDMMP47C1SJ
Part Number
Without Screw Locks
With Boardlocks
DDMMC24C7SJ
DDMMC36C4SJ
DDMMC43C2SJ
DDMMC47C1SJ
Part Number
With Screw Locks
Without Boardlocks
DDMMD24C7SJ
DDMMD36C4SJ
DDMMD43C2SJ
DDMMD47C1SJ
Part Number
With Screw Locks
With Boardlocks
DDMMG24C7SJ
DDMMG36C4SJ
DDMMG43C2SJ
DDMMG47C1SJ
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMG36X4SJ
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 233.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
W
F
10,06
(.396) 13,74
(.541)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
5,68
(.224)
2,84 (.112)
BRACKET,
METAL
4,33 ± 0,38
(.170 ± .015)
Screw lock, boardlock, and coaxial contacts
removed for clarity
Engaging Face
10°
L
2,54
(.100)
11,94 ± 0,33
(.470 ± .013)
Ø 0,51
(.020)
D
E
3,89 (.153)
MIN
2,92
(.115)
BOARDLOCK
Ø 0,76
(.030)
0,82
(.032)
B
0,56
(.023)
C
A
Screw lock, boardlock, and signal contacts
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
149
D Subminiature
Military/High Reliability
Coaxial Straight PCB (Sizes DE-DC)
Plug
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 238-239.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5C1PN
DAMMV7C2PN
DAMMV11C1PN
DAMMV3C3PN
DAMMV3CK3PNTM
DBMMV5C5PN
DBMMV9C4PN
DBMMV13C3PN
DBMMV17C2PN
DBMMV21C1PN
DCMMV8C8PN
DCMMV13C6PN
DCMMV17C5PN
DCMMV21CA4PN
DCMMV25C3PN
DCMMV27C2PN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5C1PN
DAMMZ7C2PN
DAMMZ11C1PN
DAMMZ3C3PN
DAMMZ3CK3PNTM
DBMMZ5C5PN
DBMMZ9C4PN
DBMMZ13C3PN
DBMMZ17C2PN
DBMMZ21C1PN
DCMMZ8C8PN
DCMMZ13C6PN
DCMMZ17C5PN
DCMMZ21CA4PN
DCMMZ25C3PN
DCMMZ27C2PN
Part Number
With Screw Locks
With Boardlocks
DEMMN5C1PN
DAMMN7C2PN
DAMMN11C1PN
DAMMN3C3PN
DAMMN3CK3PNTM
DBMMN5C5PN
DBMMN9C4PN
DBMMN13C3PN
DBMMN17C2PN
DBMMN21C1PN
DCMMN8C8PN
DCMMN13C6PN
DCMMN17C5PN
DCMMN21CA4PN
DCMMN25C3PN
DCMMN27C2PN
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1PN
For DD shell size, see page 152.
ឮ Keyed
Engaging Face
A
2,54
(.100)
C
Ø 0,51
(.020)
0,62
(.024)
B
E
D
L
10°
Screw lock, boardlock, and signal contacts
removed for clarity
Ø 0,76
(.030)
BOARDLOCK
0,82
(.032)
3,45 (.136)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
150
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Coaxial Straight PCB (Sizes DE-DC)
Receptacle
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 241-242.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5C1SN
DAMMV7C2SN
DAMMV11C1SN
DAMMV3C3SN
DAMMV3CK3SNTM
DBMMV5C5SN
DBMMV9C4SN
DBMMV13C3SN
DBMMV17C2SN
DBMMV21C1SN
DCMMV8C8SN
DCMMV13C6SN
DCMMV17C5SN
DCMMV21CA4SN
DCMMV25C3SN
DCMMV27C2SN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5C1SN
DAMMZ7C2SN
DAMMZ11C1SN
DAMMZ3C3SN
DAMMZ3CK3SNTM
DBMMZ5C5SN
DBMMZ9C4SN
DBMMZ13C3SN
DBMMZ17C2SN
DBMMZ21C1SN
DCMMZ8C8SN
DCMMZ13C6SN
DCMMZ17C5SN
DCMMZ21CA4SN
DCMMZ25C3SN
DCMMZ27C2SN
Part Number
With Screw Locks
With Boardlocks
DEMMN5C1SN
DAMMN7C2SN
DAMMN11C1SN
DAMMN3C3SN
DAMMN3CK3SNTM
DBMMN5C5SN
DBMMN9C4SN
DBMMN13C3SN
DBMMN17C2SN
DBMMN21C1SN
DCMMN8C8SN
DCMMN13C6SN
DCMMN17C5SN
DCMMN21CA4SN
DCMMN25C3SN
DCMMN27C2SN
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1SN
For DD shell size, see page 153.
ឮ Keyed
Engaging Face
A
Ø 0,51
(.020)
2,54
(1.00)
C
0,62
(.024)
B
E
D
L
10°
Screw lock, boardlock, and signal contacts
removed for clarity
BOARDLOCK
0,82
(.032)
3,45 (.136)
Ø 0,76
(.030)
4,52 (.178)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
W
SCREW LOCK
#4-40 UNC
F
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
151
D Subminiature
Military/High Reliability
Coaxial Straight PCB (Size DD)
Plug
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24C7PN
DDMMV36C4PN
DDMMV43C2PN
DDMMV47C1PN
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24C7PN
DDMMZ36C4PN
DDMMZ43C2PN
DDMMZ47C1PN
Part Number
With Screw Locks
With Boardlocks
DDMMN24C7PN
DDMMN36C4PN
DDMMN43C2PN
DDMMN47C1PN
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24XPN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 256.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
Ø 0,51
(.020)
A
2,54
(.100)
C
0,62
(.024)
B
D
E
L
Screw lock, boardlock, and signal contacts
removed for clarity
10°
BOARDLOCK
0,82
(.032)
3,45
(.136)
Ø 0,76
(.030)
7,62 ± 0,25
(.300 ± .010)
5,69
(.224)
2,84
(.112)
4,52
(.178)
2,92
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
Screw lock, boardlock, and coaxial contact
removed for clarity
SCREW LOCK
#4-40 UNC
Dimensions
Shell Size
DD
152
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Coaxial Straight PCB (Size DD)
Receptacle
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24C7SN
DDMMV36C4SN
DDMMV43C2SN
DDMMV47C1SN
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24C7SN
DDMMZ36C4SN
DDMMZ43C2SN
DDMMZ47C1SN
Part Number
With Screw Locks
With Boardlocks
DDMMN24C7SN
DDMMN36C4SN
DDMMN43C2SN
DDMMN47C1SN
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24X7SN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 259.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
A
2,54
(.100)
C
B
Ø 0,51
(.020)
0,62
(.024)
D
E
L
10°
BOARDLOCK
Screw lock, boardlock, and signal contacts
removed for clarity
0,82
(.032)
3,45
(.136)
Ø 0,76
(.030)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
5,69
(.224)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
F
W
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and coaxial contact
removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
153
D Subminiature
Military/High Reliability
40 A High Power 90° PCB (Sizes DE-DC)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 244-245.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMP5H1PJ
DAMMP7H2PJ
DAMMP11H1PJ
DAMMP3H3PJ
DAMMP3HK3PJTM
DBMMP5H5PJ
DBMMP9H4PJ
DBMMP13H3PJ
DBMMP17H2PJ
DBMMP21H1PJ
DCMMP8H8PJ
DCMMP13H6PJ
DCMMP17H5PJ
DCMMP21HA4PJ
DCMMP25H3PJ
DCMMP27H2PJ
Part Number
Without Screw Locks
With Boardlocks
DEMMC5H1PJ
DAMMC7H2PJ
DAMMC11H1PJ
DAMMC3H3PJ
DAMMC3HK3PJTM
DBMMC5H5PJ
DBMMC9H4PJ
DBMMC13H3PJ
DBMMC17H2PJ
DBMMC21H1PJ
DCMMC8H8PJ
DCMMC13H6PJ
DCMMC17H5PJ
DCMMC21HA4PJ
DCMMC25H3PJ
DCMMC27H2PJ
Part Number
With Screw Locks
Without Boardlocks
DEMMD5H1PJ
DAMMD7H2PJ
DAMMD11H1PJ
DAMMD3H3PJ
DAMMD3HK3PJTM
DBMMD5H5PJ
DBMMD9H4PJ
DBMMD13H3PJ
DBMMD17H2PJ
DBMMD21H1PJ
DCMMD8H8PJ
DCMMD13H6PJ
DCMMD17H5PJ
DCMMD21HA4PJ
DCMMD25H3PJ
DCMMD27H2PJ
Part Number
With Screw Locks
With Boardlocks
DEMMG5H1PJ
DAMMG7H2PJ
DAMMG11H1PJ
DAMMG3H3PJ
DAMMG3HK3PJTM
DBMMG5H5PJ
DBMMG9H4PJ
DBMMG13H3PJ
DBMMG17H2PJ
DBMMG21H1PJ
DCMMG8H8PJ
DCMMG13H6PJ
DCMMG17H5PJ
DCMMG21HA4PJ
DCMMG25H3PJ
DCMMG27H2PJ
Notes: For DD shell size, see page 156.
ឮ Keyed
3,89 (.153)
MIN.
Engaging Face
A
C
B
20,57 ± 0,38
(.810 ±.015)
E
D
L
BOARDLOCK
10°
Ø 0,76
(.030)
Ø 3,18
(.125)
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
BRACKET,
METAL
12,34
(.486) 8,64
(.340)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
154
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
40 A High Power 90° PCB (Sizes DE-DC)
Receptacle
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 247-248.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMP5H1SJ
DAMMP7H2SJ
DAMMP11H1SJ
DAMMP3H3SJ
DAMMP3HK3SJTM
DBMMP5H5SJ
DBMMP9H4SJ
DBMMP13H3SJ
DBMMP17H2SJ
DBMMP21H1SJ
DCMMP8H8SJ
DCMMP13H6SJ
DCMMP17H5SJ
DCMMP21HA4SJ
DCMMP25H3SJ
DCMMP27H2SJ
Part Number
Without Screw Locks
With Boardlocks
DEMMC5H1SJ
DAMMC7H2SJ
DAMMC11H1SJ
DAMMC3H3SJ
DAMMC3HK3SJTM
DBMMC5H5SJ
DBMMC9H4SJ
DBMMC13H3SJ
DBMMC17H2SJ
DBMMC21H1SJ
DCMMC8H8SJ
DCMMC13H6SJ
DCMMC17H5SJ
DCMMC21HA4SJ
DCMMC25H3SJ
DCMMC27H2SJ
Part Number
With Screw Locks
Without Boardlocks
DEMMD5H1SJ
DAMMD7H2SJ
DAMMD11H1SJ
DAMMD3H3SJ
DAMMD3HK3SJTM
DBMMD5H5SJ
DBMMD9H4SJ
DBMMD13H3SJ
DBMMD17H2SJ
DBMMD21H1SJ
DCMMD8H8SJ
DCMMD13H6SJ
DCMMD17H5SJ
DCMMD21HA4SJ
DCMMD25H3SJ
DCMMD27H2SJ
Part Number
With Screw Locks
With Boardlocks
DEMMG5H1SJ
DAMMG7H2SJ
DAMMG11H1SJ
DAMMG3H3SJ
DAMMG3HK3SJTM
DBMMG5H5SJ
DBMMG9H4SJ
DBMMG13H3SJ
DBMMG17H2SJ
DBMMG21H1SJ
DCMMG8H8SJ
DCMMG13H6SJ
DCMMG17H5SJ
DCMMG21HA4SJ
DCMMG25H3SJ
DCMMG27H2SJ
Notes: For DD shell size, see page 157.
ឮ Keyed.
3,89 (.153)
MIN.
Engaging Face
20,57 ± 0,38
(.810 ± .015)
L
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
Ø 0,76
(.030)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
BRACKET,
METAL
12,34
(.486)
11,53 ± 0,25
(.454 ± .010)
RIVNUT
#4-40 UNC
8,64
(.340)
F
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
155
D Subminiature
Military/High Reliability
40 A High Power 90° PCB (Size DD)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMP24H7PJ
DDMMP36H4PJ
DDMMP43H2PJ
DDMMP47H1PJ
Part Number
Without Screw Locks
With Boardlocks
DDMMC24H7PJ
DDMMC36H4PJ
DDMMC43H2PJ
DDMMC47H1PJ
Part Number
With Screw Locks
Without Boardlocks
DDMMD24H7PJ
DDMMD36H4PJ
DDMMD43H2PJ
DDMMD47H1PJ
Part Number
With Screw Locks
With Boardlocks
DDMMG24H7PJ
DDMMG36H4PJ
DDMMG43H2PJ
DDMMG47H1PJ
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 246.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Engaging Face
A
3,89 (.153)
MIN
C
B
20,57 ± 0,38
(.810 ± .015)
D
E
L
2,92
(.115)
10°
BOARDLOCK
Ø 3.18
(.125)
Screw lock, boardlock, and signal contacts
removed for clarity
Ø 0,76
(.030)
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
5,68
(.224)
BRACKET,
METAL
13,74
(.541)
RIVNUT
#4-40 UNC
10,06
(.396)
11,53 ± 0,25
(.454 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DD
156
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
40 A High Power 90° PCB (Size DD)
Receptacle
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMP24H7SJ
DDMMP36H4SJ
DDMMP43H2SJ
DDMMP47H1SJ
Part Number
Without Screw Locks
With Boardlocks
DDMMC24H7SJ
DDMMC36H4SJ
DDMMC43H2SJ
DDMMC47H1SJ
Part Number
With Screw Locks
Without Boardlocks
DDMMD24H7SJ
DDMMD36H4SJ
DDMMD43H2SJ
DDMMD47H1SJ
Part Number
With Screw Locks
With Boardlocks
DDMMG24H7SJ
DDMMG36H4SJ
DDMMG43H2SJ
DDMMG47H1SJ
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 249.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Engaging Face
A
3,89 (.153)
MIN
C
B
20,57 ± 0,38
(.810 ± .015)
E
D
L
10°
BOARDLOCK
Ø 3,18
(.125)
Ø 0,76
(.030)
2,92
(.115)
Screw lock, boardlock, and signal contacts
removed for clarity
2,84
(.112)
BRACKET,
METAL
RIVNUT
#4-40 UNC
13,74
(.541) 10,06
(.396)
4,33 ± 0,38
(.170 ± .015)
5,68
(.224)
11,53 ± 0,25
(.454 ± .010)
W
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
Screw lock, boardlock, and high power contact
removed for clarity
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
157
D Subminiature
Military/High Reliability
40 A High Power Straight PCB (Sizes DE-DC)
Plug
Part Numbers with Standoff #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 254-255.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5H1PN
DAMMV7H2PN
DAMMV11H1PN
DAMMV3H3PN
DAMMV3HK3PNTM
DBMMV5H5PN
DBMMV9H4PN
DBMMV13H3PN
DBMMV17H2PN
DBMMV21H1PN
DCMMV8H8PN
DCMMV13H6PN
DCMMV17H5PN
DCMMV21HA4PN
DCMMV25H3PN
DCMMV27H2PN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5H1PN
DAMMZ7H2PN
DAMMZ11H1PN
DAMMZ3H3PN
DAMMZ3HK3PNTM
DBMMZ5H5PN
DBMMZ9H4PN
DBMMZ13H3PN
DBMMZ17H2PN
DBMMZ21H1PN
DCMMZ8H8PN
DCMMZ13H6PN
DCMMZ17H5PN
DCMMZ21HA4PN
DCMMZ25H3PN
DCMMZ27H2PN
Part Number
With Screw Locks
With Boardlocks
DEMMN5H1PN
DAMMN7H2PN
DAMMN11H1PN
DAMMN3H3PN
DAMMN3HK3PNTM
DBMMN5H5PN
DBMMN9H4PN
DBMMN13H3PN
DBMMN17H2PN
DBMMN21H1PN
DCMMN8H8PN
DCMMN13H6PN
DCMMN17H5PN
DCMMN21HA4PN
DCMMN25H3PN
DCMMN27H2PN
Notes: For DD shell sizes, see page 160.
ឮ Keyed.
Engaging Face
A
C
B
D
E
10°
Ø 3,18
(.125)
BOARDLOCK
4,65
(.183)
Ø 0,76
(.030)
2,84
(.112)
4,52
(.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
L
W
F
Screw lock, boardlock and high power contact
removed for clarity
SCREW LOCK
#4-40 UNC
Dimensions
Shell Size
DE
DA
DB
DC
158
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
40 A High Power Straight PCB (Sizes DE-DC)
Receptacle
Part Numbers with Standoff #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 257-258.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5H1SN
DAMMV7H2SN
DAMMV11H1SN
DAMMV3H3SN
DAMMV3HK3SNTM
DBMMV5H5SN
DBMMV9H4SN
DBMMV13H3SN
DBMMV17H2SN
DBMMV21H1SN
DCMMV8H8SN
DCMMV13H6SN
DCMMV17H5SN
DCMMV21HA4SN
DCMMV25H3SN
DCMMV27H2SN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5H1SN
DAMMZ7H2SN
DAMMZ11H1SN
DAMMZ3H3SN
DAMMZ3HK3SNTM
DBMMZ5H5SN
DBMMZ9H4SN
DBMMZ13H3SN
DBMMZ17H2SN
DBMMZ21H1SN
DCMMZ8H8SN
DCMMZ13H6SN
DCMMZ17H5SN
DCMMZ21HA4SN
DCMMZ25H3SN
DCMMZ27H2SN
Part Number
With Screw Locks
With Boardlocks
DEMMN5H1SN
DAMMN7H2SN
DAMMN11H1SN
DAMMN3H3SN
DAMMN3HK3SNTM
DBMMN5H5SN
DBMMN9H4SN
DBMMN13H3SN
DBMMN17H2SN
DBMMN21H1SN
DCMMN8H8SN
DCMMN13H6SN
DCMMN17H5SN
DCMMN21HA4SN
DCMMN25H3SN
DCMMN27H2SN
Notes: For DD shell sizes, see page 161.
ឮ Keyed.
Engaging Face
A
C
B
D
E
10°
BOARDLOCK
Ø 0,76
(.030)
Ø 3,18
(.125)
4,65
(.183)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
L
SCREW LOCK
#4-40 UNC
W
F
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
159
D Subminiature
Military/High Reliability
40 A High Power Straight PCB (Size DD)
Plug
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24H7PN
DDMMV36H4PN
DDMMV43H2PN
DDMMV47H1PN
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24H7PN
DDMMZ36H4PN
DDMMZ43H2PN
DDMMZ47H1PN
Part Number
With Screw Locks
With Boardlocks
DDMMN24H7PN
DDMMN36H4PN
DDMMN43H2PN
DDMMN47H1PN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 256.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
D
E
10°
Ø 3,18
(.125)
BOARDLOCK
4,65
(.183)
Ø 0,76
(.030)
5,69
(.224)
4,52
(.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
L
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size
DD
160
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
40 A High Power Straight PCB (Size DD)
Receptacle
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24H7SN
DDMMV36H4SN
DDMMV43H2SN
DDMMV47H1SN
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24H7SN
DDMMZ36H4SN
DDMMZ43H2SN
DDMMZ47H1SN
Part Number
With Screw Locks
With Boardlocks
DDMMN24H7SN
DDMMN36H4SN
DDMMN43H2SN
DDMMN47H1SN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 259.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
D
E
10°
Ø 3,18
(.125)
Ø 0,76
(.030)
BOARDLOCK
4,65
(.183)
5,69
(.224)
2,84
(.112)
4,52 (.178)
7,62 ± 0,25
(.300 ± .010)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
F
W
L
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
161
D Subminiature
Military/High Reliability
High Voltage Straight PCB (Sizes DE-DC)
Plug
Part Numbers with Standoff #4-40 UNC
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see pages 254-255.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5V1PN
DAMMV7V2PN
DAMMV11V1PN
DAMMV3V3PN
DAMMV3VK3PNTM
DBMMV5V5PN
DBMMV9V4PN
DBMMV13V3PN
DBMMV17V2PN
DBMMV21V1PN
DCMMV8V8PN
DCMMV13V6PN
DCMMV17V5PN
DCMMV21VA4PN
DCMMV25V3PN
DCMMV27V2PN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5V1PN
DAMMZ7V2PN
DAMMZ11V1PN
DAMMZ3V3PN
DAMMZ3VK3PNTM
DBMMZ5V5PN
DBMMZ9V4PN
DBMMZ13V3PN
DBMMZ17V2PN
DBMMZ21V1PN
DCMMZ8V8PN
DCMMZ13V6PN
DCMMZ17V5PN
DCMMZ21VA4PN
DCMMZ25V3PN
DCMMZ27V2PN
Part Number
With Screw Locks
With Boardlocks
DEMMN5V1PN
DAMMN7V2PN
DAMMN11V1PN
DAMMN3V3PN
DAMMN3VK3PNTM
DBMMN5V5PN
DBMMN9V4PN
DBMMN13V3PN
DBMMN17V2PN
DBMMN21V1PN
DCMMN8V8PN
DCMMN13V6PN
DCMMN17V5PN
DCMMN21VA4PN
DCMMN25V3PN
DCMMN27V2PN
Notes: For DD shell size, see page 164.
ឮ Keyed.
Engaging Face
A
C
B
E
D
10°
Ø 0,76
(.030)
4,52
(.178)
BOARDLOCK
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
F
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
L
SCREW LOCK
#4-40 UNC
Hardware and high voltage contact
removed for clarity
Dimensions
Plug
Shell Size
DE
DA
DB
DC
162
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
W
±0,37 (.015)
6,69 (.264)
6,69 (.264)
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
High Voltage Straight PCB (Sizes DE-DC)
Receptacle
Part Numbers with Standoff #4-40 UNC
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 257-258.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
Part Number
Without Screw Locks
Without Boardlocks
DEMMV5V1SN
DAMMV7V2SN
DAMMV11V1SN
DAMMV3V3SN
DAMMV3VK3SNTM
DBMMV5V5SN
DBMMV9V4SN
DBMMV13V3SN
DBMMV17V2SN
DBMMV21V1SN
DCMMV8V8SN
DCMMV13V6SN
DCMMV17V5SN
DCMMV21VA4SN
DCMMV25V3SN
DCMMV27V2SN
Part Number
Without Screw Locks
With Boardlocks
DEMMZ5V1SN
DAMMZ7V2SN
DAMMZ11V1SN
DAMMZ3V3SN
DAMMZ3VK3SNTM
DBMMZ5V5SN
DBMMZ9V4SN
DBMMZ13V3SN
DBMMZ17V2SN
DBMMZ21V1SN
DCMMZ8V8SN
DCMMZ13V6SN
DCMMZ17V5SN
DCMMZ21VA4SN
DCMMZ25V3SN
DCMMZ27V2SN
Part Number
With Screw Locks
With Boardlocks
DEMMN5V1SN
DAMMN7V2SN
DAMMN11V1SN
DAMMN3V3SN
DAMMN3VK3SNTM
DBMMN5V5SN
DBMMN9V4SN
DBMMN13V3SN
DBMMN17V2SN
DBMMN21V1SN
DCMMN8V8SN
DCMMN13V6SN
DCMMN17V5SN
DCMMN21VA4SN
DCMMN25V3SN
DCMMN27V2SN
Notes: For DD shell size, see page 165.
ឮ Keyed.
Engaging Face
A
C
B
E
D
10°
Ø 0,76
(.030)
BOARDLOCK
7,62 ± 0,25
(.300 ± .010)
4,52
(.178)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
W
L
SCREW LOCK
#4-40 UNC
F
Hardware and high voltage contact
removed for clarity.
Dimensions
Receptacle
Shell Size
DE
DA
DB
DC
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
163
D Subminiature
Military/High Reliability
High Voltage Straight PCB (Size DD)
Plug
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24V7PN
DDMMV36V4PN
DDMMV43V2PN
DDMMV47V1PN
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24V7PN
DDMMZ36V4PN
DDMMZ43V2PN
DDMMZ47V1PN
Part Number
With Screw Locks
With Boardlocks
DDMMN24V7PN
DDMMN36V4PN
DDMMN43V2PN
DDMMN47V1PN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 256.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
E
D
10°
Ø 0,76
(.030)
5,69
(.224)
4,52
(.178)
BOARDLOCK
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
W
L
F
Hardware and high voltage contact
removed for clarity.
Dimensions
Plug
Shell Size
DD
164
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,81 (2.079)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
High Voltage Straight PCB (Size DD)
Receptacle
Part Numbers with Standoff #4-40 UNC
Shell Size
DD
DD
DD
DD
Part Number
Without Screw Locks
Without Boardlocks
DDMMV24V7SN
DDMMV36V4SN
DDMMV43V2SN
DDMMV47V1SN
Layout
24W7
36W4
43W2
47W1
Part Number
Without Screw Locks
With Boardlocks
DDMMZ24V7SN
DDMMZ36V4SN
DDMMZ43V2SN
DDMMZ47V1SN
Part Number
With Screw Locks
With Boardlocks
DDMMN24V7SN
DDMMN36V4SN
DDMMN43V2SN
DDMMN47V1SN
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see page 259.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Engaging Face
A
C
B
E
D
10°
Ø 0,76
(.030)
BOARDLOCK
5,69
(.224)
4,52
(.178)
7,62 ± 0,25
(.300 ± .010)
2,84
(.112)
2,92
(.115)
STANDOFF
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
L
W
F
Hardware and high voltage contacts
removed for clarity
Dimensions
Receptacle
Shell Size
DD
A
±0,38 (.015)
66,93 (2.635)
B
±0,13 (.005)
52,42 (2.064)
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
10,74 (.423)
E
±0,38 (.015)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
165
D Subminiature
Military/High Reliability
Cable Solder Cup
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Through Hole
DEMM5W1P
DAMM7W2P
DAMM11W1P
DAMM3W3P
DAMM3WK3P
DBMMP5W5P
DBMM9W4P
DBMM13W3P
DBMM17W2P
DBMM21W1P
DCMM8W8P
DCMM13W6P
DCMM17W5P
DCMM21WA4P
DCMM25W3P
DCMM27W2P
DDMM24W7P
DDMM36W4P
DDMM43W2P
DDMM47W1P
Dual
Float Mount
DEMMY5W1P
DAMMY7W2P
DAMMY11W1P
DAMMY3W3P
DAMMY3WK3P
DBMMY5W5P
DBMMY9W4P
DBMMY13W3P
DBMMY17W2P
DBMMY21W1P
DCMMY8W8P
DCMMY13W6P
DCMMY17W5P
DCMMY21WA4P
DCMMY25W3P
DCMMY27W2P
DDMMY24W7P
DDMMY36W4P
DDMMY43W2P
DDMMY47W1P
Clinch Nut
#4-40 UNC
DEMME5W1P
DAMME7W2P
DAMME11W1P
DAMME3W3P
DAMME3WK3P
DBMME5W5P
DBMME9W4P
DBMME13W3P
DBMME17W2P
DBMME21W1P
DCMME8W8P
DCMME13W6P
DCMME17W5P
DCMME21WA4P
DCMME25W3P
DCMME27W2P
DDMME24W7P
DDMME36W4P
DDMME43W2P
DDMME47W1P
Note: ឮ Keyed.
DD Configuration
Engaging Face
5,69
(.224)
A
C
2,84
(.112)
Ø 3,05
(.120)
B
K
D
E
L
10°
10,72 (.422)
MAX
2,84
(.112)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
166
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Military/High Reliability
Cable Solder Cup
Part Numbers
Receptacle
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Dual
Float Mount
DEMMY5W1S
DAMMY7W2S
DAMMY11W1S
DAMMY3W3S
DAMMY3WK3S
DBMMY5W5S
DBMMY9W4S
DBMMY13W3S
DBMMY17W2S
DBMMY21W1S
DCMMY8W8S
DCMMY13W6S
DCMMY17W5S
DCMMY21WA4S
DCMMY25W3S
DCMMY27W2S
DCMMY24W7S
DCMMY36W4S
DCMMY43W2S
DCMMY47W1S
Through Hole
DEMM5W1S
DAMM7W2S
DAMM11W1S
DAMM3W3S
DAMM3WK3S
DBMM5W5S
DBMM9W4S
DBMM13W3S
DBMM17W2S
DBMM21W1S
DCMM8W8S
DCMM13W6S
DCMM17W5S
DCMM21WA4S
DCMM25W3S
DCMM27W2S
DCMM24W7S
DCMM36W4S
DCMM43W2S
DCMM47W1S
Clinch Nut
#4-40 UNC
DEMME5W1S
DAMME7W2S
DAMME11W1S
DAMME3W3S
DAMME3WK3S
DBMME5W5S
DBMME9W4S
DBMME13W3S
DBMME17W2S
DBMME21W1S
DCMME8W8S
DCMME13W6S
DCMME17W5S
DCMME21WA4S
DCMME25W3S
DCMME27W2S
DCMME24W7S
DCMME36W4S
DCMME43W2S
DCMME47W1S
Note: ឮ Keyed.
Engaging Face
DD Configuration
5,69
(.224)
A
2,84
(.112)
C
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84 (.112)
9,91 (.390)
MAX
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.123)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
167
D Subminiature
Selection Index
Space/High Reliability
Page
Space/High Reliability
An Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Standard Layout Connectors
Straight PC Tail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
90° PC Tail with Plastic Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Solder Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
D*MA Crimp Contact Cable Connectors
Standard Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
High Density. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Contact Cavity Arrangements — High Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Crimp Contacts and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Combo D Layout Solder Cup Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Cable (Size 8) Loose Contacts
Coaxial 50 Ohm — Straight Crimp or Solder Braid . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
High Power — Solder or Crimp and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Accessories
Metal Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Screw Lock Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
NASA/GSFC Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
ESA-SCC Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
168
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
I
TT Cannon has a long history of providing
high performance D Subminiature connectors
for space applications (qualified by NASA/
GFSC and the European Space Agency). Space/
High Reliabilty D*M and D*MA connectors meet
stringent tests for outgassing and residual
magnetism and are suitable for use in space,
medical, and high performance military/aerospace
applications. D*M and D*MA connectors meet the
performance and dimensional requirements of
MIL-C-24308. The newest product group is High
Density D*MA crimp connectors.
Applications
ɀ Space - Low/High Orbit Satellites
ɀ Medical
Product Features
ɀ Non-Magnetic
ɀ No Outgassing
Specifications
Temperature Rating
Signal Contact Current Rating
Signal Contact Resistance
Wire Accommodation (Solder)
Wire Accommodation (Crimp)
Coaxial Impedance
Loss VSWR
Coaxial Insertion Loss
−65° at 125°C
5 A (20 AWG)
55 millivolt max. at 7.5 A test current
20 AWG max.
18/30 AWG
50 Ohm
Less than 1,3 - 1,0 up to 500 Mhz
1db loss at 500 Mhz
Dimensions are shown in mm (inch)
Dimensions subject to change
169
D Subminiature
Space/High Reliability
Dielectric Withstanding Voltage
Average Flashover
Test
Type of Contact
Center Conductor
to Coaxial Shell
Coaxial Shell to Nearest
Solder Cup Contact
High Power Contact and/or
Coaxial Shell to Plug Shell
Size 20 Signal Contact
Average
Flashover Test
Average
Flashover Test
Average
Flashover Test
Average
Flashover Test
Sea Level
1500/1700
1000/1250
90°
1200
800
—
—
1500
1000
1200
1250
Sea Level
1500/1700
1000/1250
Straight
1500
1000
1500
1000
1500
1000
1200
1250
6 096/20 000
1000/1000
650/750
90°
900
600
—
—
1000
650
1000
750
Altitude (meter/feet)
6 096/20 000 15 240/50 000
1000/1000
500/650
650/750
325/475
Straight
90°
1000
600
550
400
1500
—
1000
—
1000
500
650
325
1000
650
750
475
15 240/50 000
500/650
325/475
Straight
700
475
900
800
500
325
650
475
21 336/70 000
500/500
325/375
90°
400
275
—
—
500
325
500
375
21 336/70 000
500/500
325/375
Straight
500
325
650
425
500
325
500
375
All voltage figures are rms AC 60 rms cps. Measured at approximately +25°C, 50% rh. For additional performance specifications refer to MIL-C-24308.
Residual Magnetism Level
Residual Magnetism
20 000 Gamma
200 Gamma
Suffix Code
NM
NMB
Note: NMC is available by special request. Consult factory for details.
170
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Materials and Finishes
Connector Assembly (Shells — Yellow Chromate over Cadmium)
Description
Material
Shell
Brass per QQ-B-613
Insulator
Contact
Float Mount,
Brackets, Captive Nuts
Hardware
Diallyl Phthalate glass-filled
per MIL-M-14, type SDG-F,
Color: White (or functional
equivalent polyester)*
Copper alloy
Brass
Connector Assembly (Shells — Gold over Copper — K52)
Shell
Brass per QQ-B-613
Insulator
Contact
Float Mount,
Brackets, Captive Nuts
Hardware
Diallyl Phthalate glass-filled
per MIL-M-14, type SDG-F,
Color: White (or functional
equivalent polyester)*
Copper alloy
Brass
Coaxial/High Power Contact Assemblies
Outer Coaxial Shell
Copper alloy
Center Coaxial Contact
Copper alloy
Insulator (Coaxial Only)
Retaining Ring
High Power Contact
Teflon
Copper alloy
Copper alloy
Finish
Yellow chromate over cadmium
QQ-P-416, Type II, Class 2
None
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Yellow chromate over cadmium
QQ-P-416, Type II, Class 2
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
None
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Gold
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
None
Gold
Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
* Pending qualification
Dimensions are shown in mm (inch)
Dimensions subject to change
171
D Subminiature
Space/High Reliability
Straight PC Tail
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 275.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
PC Tail
Modifiers
M
Z
OL3
X
4,01 ± 0,69
(.158 ± .027)
4,65 ± 0,69
(.183 ± .027)
4,20 ± 1,10
(.185 ± .043)
WY
0,76 ± 0,08
(.030 ± .003)
0,76 ± 0,08
(.030 ± .003)
0,60 ± 0,08
(.023 ± .003)
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMY9POL3NM*
DAMY15POL3NM*
DBMY25POL3NM*
DCMY37POL3NM*
DDMY50POL3NM*
Through Hole
DEM9POL3NM*
DAM15POL3NM*
DBM25POL3NM*
DCM37POL3NM*
DDM50POL3NM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9POL3NMB
For shells with 50 microinches gold, add K52. Example: DEM9POL3NMK52
For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9PZNM
Engaging Face
DD Configuration
A
5,69
(.224)
C
B
Ø 3,05
(.120)
2,84
(.112)
K
E
D
L
10°
ØY
X
Dimensions
Shell Size
DE
DA
DB
DC
DD
172
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (0.39)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Straight PC Tail
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 275.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
PC Tail
Modifiers
M
X
4,01 ± 0,69
(.158 ± .027)
4,65 ± 0,69
(.183 ± .027)
4,20 ± 1,10
(.185 ± .043)
Z
OL3
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMY9SOL3NM*
DAMY15SOL3NM*
DBMY25SOL3NM*
DCMY37SOL3NM*
DDMY50SOL3NM*
Through Hole
DEM9SOL3NM*
DAM15SOL3NM*
DBM25SOL3NM*
DCM37SOL3NM*
DDM50SOL3NM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SOL3NMB
For shells with 50 microinches gold, add K52. Example: DEM9SOL3NMK52
For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9SZNM
WY
0,76 ± 0,08
(.030 ± .003)
0,76 ± 0,08
(.030 ± .003)
0,60 ± 0,08
(.023 ± .003)
DD Configuration
Engaging Face
5,69
(.224)
A
2,84
(.112)
C
Ø 3,05
(.120)
B
K
D
E
L
10°
2,84
(.112)
ØY
X
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
173
D Subminiature
Space/High Reliability
90° PC Tail with Plastic Bracket
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
Layout
9
15
25
37
50
Part Number
DEM9PLNM*
DAM15PLNM*
DBM25PLNM*
DCM37PLNM*
DDM50PLNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PLNMB
For shells with 50 microinches gold, add K52. Example: DEM9PLNMK52
DD Configuration
Engaging Face
2,84
(.112)
A
5,68
(.224)
C
B
E
4,01 ± 0,69
(.158 ± .027)
D
7,18 ± 0,25
(.283 ± .010)
10°
Ø 0,76 (.030)
Ø 3,05
(.120)
M
L
2,84
(.112)
4,01 ± 0,69
(.158 ± .027)
N
F
7,18 ± 0,25
(.283 ± .010)
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
174
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016)
10,72 (.422) 6,693 (.2635)
—
10,72 (.422) 6,693 (.2635)
—
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
10,82 (.426)
—
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
M
±0,25 (.010)
12,30 (.484)
12,30 (.484)
12,30 (.484)
12,30 (.484)
15,09 (.594)
N
±0,13 (.005)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,04 (.395)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
90° PC Tail with Plastic Bracket
Receptacle
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 272.
ɀ For panel cutouts, see page 221.
Layout
9
15
25
37
50
Part Number
DEM9SLNM*
DAM15SLNM*
DBM25SLNM*
DCM37SLNM*
DDM50SLNM*
Notes: * For Residual Magnetism Levels of 200 gamma, add B. Example: DEM9SLNMB
For shells with 50 microinches gold, add K52. Example: DEM9SLNMK52
Engaging Face
DD Configuration
A
2,84
(.112)
5,68
(.224)
C
B
E
4,01 ± 0,69
(.158 ± .027)
D
7,18 ± 0,25
(.283 ± .010)
10°
Ø 0,76 (.030)
4,01 ± 0,69
(.158 ± .027)
2,84
(.112)
Ø 3,05
(.120)
M
L
N
F
7,18 ± 0,25
(.283 ± .010)
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
M
±0,25 (.010)
12,30 (.484)
12,30 (.484)
12,30 (.484)
12,30 (.484)
15,09 (.594)
N
±0,13 (.005)
8,64 (.340)
8,64 (.340)
8,64 (.340)
8,64 (.340)
10,04 (.395)
Dimensions are shown in mm (inch)
Dimensions subject to change
175
D Subminiature
Space/High Reliability
90° Solder Contact PCB Connector — European Footprint
Plug
Part Numbers
Shell Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
Through Hole
DEM9PNM*1AON
DAM15PNM*1AON
DBM25PNM*1AON
DCM37PNM*1AON
DDM50PNM*1AON
Dual Float Mount
DEMY9PNM*1AON
DAMY15PNM*1AON
DBMY25PNM*1AON
DCMY37PNM*1AON
DDMY50PNM*1AON
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1AON
For shells with 50 microinches gold, add K52. DEM9PNM1AONK52
Engaging Face
DD Configuration
2,54
(.100)
A
5,00
(.197)
5,08
(.200)
C
B
Ø 3,05
(.120)
9,40 ± 0,20
(.370 ± .008)
D
E
K
L
10°
Ø 0,60
(.024)
2,54
(.100)
5,00
(.197)
9,40 ± 0,20
(.370 ± .008)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
176
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
90° Solder Contact PCB Connector — European Footprint
Part Numbers
Receptacle
Shell Size
DE
DA
DB
DC
DD
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Layout
9
15
25
37
50
Through Hole
DEM9SNM*1AON
DAM15SNM*1AON
DBM25SNM*1AON
DCM37SNM*1AON
DDM50SNM*1AON
Dual Float Mount
DEMY9SNM*1AON
DAMY15SNM*1AON
DBMY25SNM*1AON
DCMY37SNM*1AON
DDMY50SNM*1AON
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1AON
For shells with 50 microinches gold, add K52. Example: DEM9SNM1AONK52
Engaging Face
DD Configuration
2,54
(.100)
A
C
Ø 3,05
(.120)
B
9,40 ± 0,20
(.370 ± .008)
D
E
5,00
(.197)
5,08
(.200)
K
L
10°
Ø 0,60
(.024)
5,00
(.197)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
177
D Subminiature
Space/High Reliability
90° Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍ or 9,4ɍɍ mm
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Shell Size
DE
DA
DB
DC
DD
Metal Bracket
Threaded Insert #4-40
DEM9PNM*1A7N
DAM15PNM*1A7N
DBM25PNM*1A7N
DCM37PNM*1A7N
DDM50PNM*1A7N
Layout
9
15
25
37
50
Metal Bracket
Threaded Insert M3
DEM9PNM*1A9N
DAM15PNM*1A9N
DBM25PNM*1A9N
DCM37PNM*1A9N
DDM50PNM*1A9N
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1A7N
For shells with 50 microinches gold, add K52. Example: DEM9PNM1A7NK52
Engaging Face
DD Configuration
2,54 (.100)
A
3,70 (.146)
5,08 (.200)
C
B
E
D
9,40 (.370)
L
1,00
(.039)
10°
Ø 0,60 (.024)
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0.38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0.25 (.010)
10,72 (.422)
10,72 (.422)
10,82 (.426)
10,82 (.426)
10,82 (.426)
W
±0,368 (.0145)
6,693 (.2635)
6,693 (.2635)
—
—
—
W
±0,41 (.016)
—
—
6,84 (.269)
6,84 (.269)
6,84 (.269)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
N
±0,15 (.006)
10,7 (.42)
10,7 (.42)
10,7 (.42)
10,7 (.42)
12,1 (.48)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
178
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
90° Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍ or 9,4ɍɍ mm
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For P.C. hole patterns, see page 273.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (European),
see page 227.
Shell Size
DE
DA
DB
DC
DD
Metal Bracket
Threaded Insert #4-40
DEM9SNM*1A7N
DAM15SNM*1A7N
DBM25SNM*1A7N
DCM37SNM*1A7N
DDM50SNM*1A7N
Layout
9
15
25
37
50
Metal Bracket
Threaded Insert M3
DEM9SNM*1A9N
DAM15SNM*1A9N
DBM25SNM*1A9N
DCM37SNM*1A9N
DDM50SNM*1A9N
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1A7N
For shells with 50 microinches gold, add K52. Example: DEM9SNM1A7NK52
Engaging Face
DD Configuration
2,54 (.100)
A
3,70 (.146)
5,08 (.200)
C
B
E
D
L
9,40 (.370)
1,00
(.039)
10°
Ø 0,60 (.024)
3,70 (.146)
2,54 (.100)
W
9,40 (.370)
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
N
±0,15 (.006)
10,7 (.42)
10,7 (.42)
10,7 (.42)
10,7 (.42)
12,1 (.48)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change
179
D Subminiature
Space/High Reliability
Solder Cup
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMY9PNM*
DAMY15PNM *
DBMY25PNM *
DCMY37PNM *
DDMY50PNM *
Through Hole
DEM9PNM*
DAM15PNM *
DBM25PNM *
DCM37PNM *
DDM50PNM *
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB
For shells with 50 microinches gold, add K52. Example: DEM9PNMK52
Engaging Face
DD Configuration
5,69
(.224)
A
C
Ø 3,05
(.120)
B
2,84
(.112)
K
E
D
L
10°
10,72 (.422)
MAX
2,84
(.112)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
180
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0.76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Solder Cup
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMY9SNM*
DAMY15SNM*
DBMY25SNM*
DCMY37SNM*
DDMY50SNM*
Through Hole
DEM9SNM*
DAM15SNM*
DBM25SNM*
DCM37SNM*
DDM50SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB
For shells with 50 microinches gold, add K52. Example: DEM9SNMK52
Engaging Face
DD Configuration
5,69
(.224)
A
C
2,84
(.112)
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84
(.112)
9,91 (.390)
MAX
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
181
D Subminiature
Space/High Reliability
D*MA Standard Density Crimp Contact Cable Connector
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMAY9PNM*
DAMAY15PNM*
DBMAY25PNM*
DCMAY37PNM*
DDMAY50PNM*
Through Hole
DEMA9PNM*
DAMA15PNM*
DBMA25PNM*
DCMA37PNM*
DDMA50PNM*
Notes: *For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9PNMB
For shells with 50 microinches gold, add K52. Example: DEMA9PNMK52
For connectors without contacts, add F0. Example: DEMA9PNMF0 (F0 not marked on the connector)
For crimp (Size 20) contacts and tooling, see pages 187 & 275
Engaging Face
A
C
Ø 3,05 (.120)
B
D
E
10°
K
8,76 (.345) MAX
L
Dimensions
Shell Size
DE
DA
DB
DC
DD
182
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
W
F
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
D*MA Standard Density Crimp Contact Cable Connector
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 224.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Dual
Float Mount
DEMAY9SNM*
DAMAY15SNM*
DBMAY25SNM*
DCMAY37SNM*
DDMAY50SNM*
Through Hole
DEMA9SNM*
DAMA15SNM*
DBMA25SNM*
DCMA37SNM*
DDMA50SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9SNMB
For shells with 50 microinches gold, add K52. Example: DEMA9SNMK52
For connectors without contacts, add F0. Example: DEMA9SNMF0 (F0 not marked on the connector)
For crimp (Size 20) contacts and tooling, see pages 187 & 275.
Engaging Face
A
C
Ø 3,05 (.120)
B
D
E
10°
8,76 (.345) MAX
K
L
W
F
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
183
D Subminiature
Space/High Reliability
D*MA High Density Crimp Contact Cable Connector
Plug
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 186.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard)
see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
15
26
44
62
78
Dual
Float Mount
DEMAY15PNM*
DAMAY26PNM*
DBMAY44PNM*
DCMAY62PNM*
DDMAY78PNM*
Through Hole
DEMA15PNM*
DAMA26PNM*
DBMA44PNM*
DCMA62PNM*
DDMA78PNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15PNMB
For shells with 50 microinches gold, add K52. Example: DEMA15PNMK52
For connectors without contacts, add F0. Example: DEMA15PNMF0 (F0 not marked on connector)
For crimp (Size 22) contacts and tooling, see pages 187 & 275
Engaging Face
A
C
Ø 3,05 (.120)
10°
B
E
D
K
8,76 (.345) MAX
F
W
L
Dimensions
Shell Size
DE
DA
DB
DC
184
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
D*MA High Density Crimp Contact Cable Connector
Part Numbers
Receptacle
Reader’s Resource
ɀ For contact cavity arrangements,
see page 186.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard)
see page 226.
Shell Size
DE
DA
DB
DC
DD
Layout
15
26
44
62
78
Dual
Float Mount
DEMAY15SNM*
DAMAY26SNM*
DBMAY44SNM*
DCMAY62SNM*
DDMAY78SNM*
Through Hole
DEMA15SNM*
DAMA26SNM*
DBMA44SNM*
DCMA62SNM*
DDMA78SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15SNMB
For shells with 50 microinches gold, add K52. Example: DEMA15SNMK52
For connectors without contacts, add F0. Example: DEMA15SNMF0 (F0 not marked on the connector)
For crimp (Size 22) contacts and tooling, see pages 187 & 275
Engaging Face
A
C
Ø 3,05 (.120)
B
10°
E
D
8,76 (.345) MAX
K
F
W
L
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
185
D Subminiature
Space/High Reliability
Plug Contact Cavity Arrangements — High Density
Face View Pin Insert
1
5
1
10
6
11
Shell Size
Contact Arrangement
Contact Size
15
1
9
10
19
30
31
26
E
15
#22
15
16
18
44
A
26
#22
B
44
#22
1
20
21
39
21
1
22
42
43
40
62
Shell Size
Contact Arrangement
Contact Size
59
60
78
C
62
#22
D
78
#22
Receptacle Contact Cavity Arrangements — High Density
Face View Socket Insert
5
10
26
11
E
15
#22
15
1
18
6
15
Shell Size
Contact Arrangement
Contact Size
9
1
10
1
30
16
44
19
31
A
26
#22
B
44
#22
20
21
1
42
22
62
Shell Size
Contact Arrangement
Contact Size
186
43
C
62
#22
1
39
21
59
40
78
60
D
78
#22
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Crimp Contacts
Pin
Contact Size
20
20-18
20-26
22D
Wire Size AWG
20, 22, 24
1 #18, 20 or 2 #20
26, 28, 30
22, 24, 26, 28
Pin
Part Number
030-8882-002
330-8782-001
030-8848-020
330-8944-001
Contact Size
20
20-18
20-26
22D
Wire Size AWG
20, 22, 24
1 #18, 20 or 2 #20
26, 28, 30
22, 24, 26, 28
Socket
Part Number
031-8944-000
031-8843-001
031-8787-020
031-8902-001
22D
High Power
Wire Size
AWG
20, 22, 24
26, 28, 30
1 #18
2 #22
22, 24, 26, 28
12, 16
Plastic Insertion/Extraction
Part Number
Description
980-2000-426
CIET-20HD
980-2000-426
CIET-20HD
—
—
—
—
274-7048-000
CIET-22D
274-7003-000
CIET-12
Plastic Extraction
Part Number
Description
323-7010-000
CET-20-11
323-7010-000
CET-20-11
274-5016-002
CET-20-15
274-5016-002
CET-20-15
—
—
—
—
Contact
Size
Wire Size
AWG
20
20, 22, 24
2026
26, 28, 30
1 #18
2 #22
22, 24, 26, 28
Crimp Tool
Part Number
Description
995-0001-584
M22520/2-01
995-0001-585
M22520/1-01
995-0001-584
M22520/2-01
Part Number
995-0001-604
995-0001-244
995-0001-325
Socket
Insertion/Extraction Tools
CIET-20HD
Contact
Size
20
2026
2018
Hand Crimp Tools
M22520/2-01
2018
22D
Locator
Description
M22520/2-08
TH25
L3198-20HD
995-0001-584
M22520/2-01
980-0005-722
K250
995-0001-584
M22520/2-01
995-0001-739
M22520/2-06
CBT-646 Vibra-Bowl Crimper
CBT-646
The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+ per hour
Power Requirements: Electrical = 115 VAC, 60 Hz, 5 A
Pneumatic = 85 psi, 2 cu. ft. per min.
Products: D*MA
Dimensions are shown in mm (inch)
Dimensions subject to change
187
D Subminiature
Space/High Reliability
Solder Cup
Part Numbers
Plug
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Dual
Float Mount
DEMY5W1PNM*
DAMY7W2PNM*
DAMY11W1PNM*
DAMY3W3PNM*
DAMY3WK3PNM*
DBMY5W5PNM*
DBMY9W4PNM*
DBMY13W3PNM*
DBMY17W2PNM*
DBMY21W1PNM*
DCMY8W8PNM*
DCMY13W6PNM*
DCMY17W5PNM*
DCMY21WA4PNM*
DCMY25W3PNM*
DCMY27W2PNM*
DDMY24W7PNM*
DDMY36W4PNM*
DDMY43W2PNM*
DDMY47W1PNM*
Through Hole
DEM5W1PNM*
DAM7W2PNM*
DAM11W1PNM*
DAM3W3PNM*
DAM3WK3PNM*
DBMP5W5PNM*
DBM9W4PNM*
DBM13W3PNM*
DBM17W2PNM*
DBM21W1PNM*
DCM8W8PNM*
DCM13W6PNM*
DCM17W5PNM*
DCM21WA4PNM*
DCM25W3PNM*
DCM27W2PNM*
DDM24W7PNM*
DDM36W4PNM*
DDM43W2PNM*
DDM47W1PNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1PNMB
For shells with 50 microinches gold, add K52. Example: DEM5W1PNMK52
ឮ Keyed
DD Configuration
Engaging Face
5,69
(.224)
A
C
2,84
(.112)
Ø 3,05
(.120)
B
K
D
E
L
10°
10,72 (.422)
MAX
2,84
(.112)
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
188
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
52,81 (2.079)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
8,36 (.329)
8,36 (.329)
8,36 (.329)
8,36 (.329)
11,07 (.436)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
W
W
K
K
±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010)
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,72 (.422) 6,693 (.2635)
—
1,206 (.0475)
—
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
10,82 (.426)
—
6,84 (.269)
—
1,52 (.060)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,99 (.039)
0,99 (.039)
0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Solder Cup
Receptacle
Part Numbers
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For panel cutouts, see page 221.
ɀ For hardware views (Standard), see page 226.
Shell Size
DE
DA
DA
DA
DA
DB
DB
DB
DB
DB
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
Layout
5W1
7W2
11W1
3W3
3WK3ឮ
5W5
9W4
13W3
17W2
21W1
8W8
13W6
17W5
21WA4
25W3
27W2
24W7
36W4
43W2
47W1
Dual
Float Mount
DEMY5W1SNM*
DAMY7W2SNM*
DAMY11W1SNM*
DAMY3W3SNM*
DAMY3WK3SNM*
DBMY5W5SNM*
DBMY9W4SNM*
DBMY13W3SNM*
DBMY17W2SNM*
DBMY21W1SNM*
DCMY8W8SNM*
DCMY13W6SNM*
DCMY17W5SNM*
DCMY21WA4SNM*
DCMY25W3SNM*
DCMY27W2SNM*
DDMY24W7SNM*
DDMY36W4SNM*
DDMY43W2SNM*
DDMY47W1SNM*
Through Hole
DEM5W1SNM*
DAM7W2SNM*
DAM11W1SNM*
DAM3W3SNM*
DAM3WK3SNM*
DBM5W5SNM*
DBM9W4SNM*
DBM13W3SNM*
DBM17W2SNM*
DBM21W1SNM*
DCM8W8SNM*
DCM13W6SNM*
DCM17W5SNM*
DCM21WA4SNM*
DCM25W3SNM*
DCM27W2SNM*
DDM24W7SNM*
DDM36W4SNM*
DDM43W2SNM*
DDM47W1SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1SNMB
For shells with 50 microinches gold, add K52. Example: DEM5W1SNMK52
ឮ Keyed
Engaging Face
DD Configuration
5,69
(.224)
A
2,84
(.112)
C
Ø 3,05
(.120)
B
K
E
D
L
10°
2,84 (.112)
9,91 (.390)
MAX
F
W
Dimensions
Shell Size
DE
DA
DB
DC
DD
A
±0,38 (.015)
30,81 (1.123)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
66,93 (2.635)
B
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
54,84 (2.159)
52,42 (2.064)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
10,74 (.423)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
15,37 (.605)
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
L
±0,25 (.010)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
189
D Subminiature
Space/High Reliability
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — Straight
Straight Crimp Braid
Plug
Receptacle
Note: Dimensions include outer sleeve
Description
Plug
Part Number
50Ȗ in.
Gold Over Copper
DM53740-36
A
max.
18,80 (.739)
B
max.
24,00 (.945)
D
min.
1,70 (.067)
Receptacle
DM53742-37
18,80 (.739)
24,00 (.945)
1,70 (.067)
RG Cable Number
Old
187/U
188/U
187/U
188/U
New
179B/U
316B/U
179B/U
316B/U
Staight Solder Braid
Plug
190
Receptacle
Description
Plug
Part Number
50Ȗ in.
Gold Over Copper
DM53740-5147
A
max.
18,80 (.739)
B
max.
24,00 (.945)
D
min.
1,70 (.067)
Receptacle
DM53742-5127
18,80 (.739)
24,00 (.945)
1,70 (.067)
RG Cable Number
Old
187/U
188/U
187/U
188/U
New
179B/U
316B/U
179B/U
316B/U
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Cable (Size 8) Loose Contacts — High Power — Solder
Plug
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic
DM53745-72
DM53745-77
DM53745-70
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic (European)
DM115224-1040A
DM115224-1020A
DM115224-1010A
Part Number
50Ȗ in. Gold
DM53745-28
DM53745-27
DM53745-25
Current Rating
40 A
20 A
10 A
Wire Size
8 AWG
12 AWG
16 AWG
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic
DM53744-62
DM53744-64
DM53744-63
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic (European)
DM115224-2040A
DM115224-2020A
DM115224-2010A
Part Number
50Ȗ in. Gold
DM53744-21
DM53744-25
DM53744-24
Current Rating
40 A
20 A
10 A
Wire Size
8 AWG
12 AWG
16 AWG
Receptacle
Cable (Size 8) Loose Contacts — High Power — Crimp
Plug
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic
DM115224-3040
DM115224-3020
DM115224-3010
Recommended Wire Trim Length
Part Number
50Ȗ in. Gold
DM130338-1
DM130339-1
DM130340-1
XA
max.
4,60 (.181)
2,54 (.100)
1,07 (.067)
XB
max.
5,84 (.230)
5,54 (.218)
2,59 (.102)
Receptacle
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic (European)
DM115224-3040A
DM115224-3020A
DM115224-3010A
XA
min.
4,20 (.165)
3,25 (.128)
2,50 (.098)
20,93 - 20,42
(.824 - .804)
XB
max.
5,80 (.228)
4,70 (.185)
3,80 (.150)
Current Rating
40 A
20 A
10 A
Wire Size
8 AWG
12 AWG
16 AWG
Recommended Wire Trim Length
ØB ØA
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic
DM115224-4040
DM115224-4020
DM115224-4010
Part Number
50Ȗ in. Gold
DM13041-1
DM13042-1
DM13043-1
XA
max.
4,60 (.181)
2,54 (.100)
1,07 (.067)
XB
max.
5,84 (.230)
5,54 (.218)
2,59 (.102)
Part Number
50Ȗ in. Gold Over Copper
Non-Magnetic (European)
DM115224-4040A
DM115224-4020A
DM115224-4010A
XA
min.
4,20 (.165)
3,25 (.128)
2,50 (.098)
XB
max.
5,80 (.228)
4,70 (.185)
3,80 (.150)
Current Rating
40 A
20 A
10 A
Wire Size
8 AWG
12 AWG
16 AWG
Crimp High Power Tooling
M300-BT
Wire Size
8 AWG
10 AWG
12 AWG
Crimp Tool
M300-BT
M300-BT
M300-BT
Crimp Tool/Locator
Tool Setting Number
Tool Setting Number
Standard Contacts
European Contacts
6
6
5
2
1
1
Locator
TP968
TP968
TP968
Dimensions are shown in mm (inch)
Dimensions subject to change
191
D Subminiature
Space/High Reliability
Metal Backshell
Metal Backshells provide strain relief.
Various profiles available for different cable routing
requirements.
Materials and Finishes
Material:
Finish:
Brass
50Ȗ in. Gold over Copper
Product Features
ɀ Qualified to MIL-Spec M85049
Deep Straight Clamp
2X Ø 3,45
(.136)
E
CABLE
ENTRY
H MAX
G
B
0,38 ± ,013
(.015 ± .005)
D MAX
C
A
F
CABLE
ENTRY
ɀ Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part Number
Non-Magnetic
DE24657-16
DA24658-15
DB24659-15
DC24660-16
DD24661-13
A
±0,38 (.015)
30,56 (1.203)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,572 (.0225)
12,484 (.4915)
12,484 (.4915)
12,484 (.4915)
12,484 (.4915)
15,253 (.6005)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
max.
14,68 (.578)
14,68 (.578)
14,68 (.578)
14,68 (.578)
17,45 (.687)
E
±0,38 (.015)
9,53 (.375)
18,11 (.713)
25,40 (1.000)
34,93 (1.375)
35,71 (1.406)
F
±0,38 (.015)
9,53 (.375)
7,93 (.312)
7,93 (.312)
7,93 (.312)
10,31 (.406)
G
±0,38 (.015)
19,05 (.750)
19,05 (.750)
25,40 (1.000)
25,40 (1.000)
28,57 (1.125)
H
max.
31,75 (1.250)
31,75 (1.250)
39,70 (1.563)
39,70 (1.563)
42,88 (1.688)
Round Cable Clamp
A
C
E
2X Ø 3,05
(.120)
G
F
Ø D MAX
CABLE ENTRY
B
0,38 ± 0,13
(.015 ± .005)
ɀ Kit consists of 1 shell, 2 screws, 2 hex nuts
Shell Size
DE
DA
DB
DC
DD
192
Layout
9
15
25
37
50
Part Number
Non-Magnetic
DE44994-2
DA20961-16
DB20962-18
DC20963-17
DD20964-19
A
±0,38 (.015)
30,68 (1.208)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
XD
max.
10,31 (.406)
10,31 (.406)
15,06 (.593)
18,23 (.718)
20,62 (.812)
E
±0,38 (.015)
16,79 (.661)
24,99 (.984)
38,48 (1.515)
55,14 (2.171)
53,16 (2.093)
F
±0,38 (.015)
3,18 (.125)
3,18 (.125)
4,75 (.187)
6,35 (.250)
7,92 (.312)
G
±0,76 (.030)
26,18 (1.031)
26,18 (1.031)
26,98 (1.062)
26,98 (1.062)
26,98 (1.062)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
Short Straight Clamp
2X Ø 3,05
(.120)
A
C
G
12,30 ± 0,38
(.484 ± .015)
B
ɀ Kit consists of 1 shell,
2 or 3 screws, 2 or 3 hex nuts
Shell Size
DA
DB
DC
DD
Layout
15
25
37
50
0,38 ± 0,13
(.015 ± .005)
F
E
CABLE
ENTRY
Part Number
Non-Magnetic
DA19678-167
DB19678-168
DC19678-138
DD19678-161
No. of
Cable Locking
Screws Included
2
2
3
3
A
±0,38 (.015)
38,88 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
±0,13 (.005)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
E
±0,38 (.015)
7,51 (.296)
7,51 (.296)
7,51 (.296)
9,91 (.390)
F
±0,38 (.015)
7,93 (.312)
20,22 (.796)
17,45 (.687)
17,45 (.687)
G
±0,89 (.035)
16,36 (.644)
16,36 (.644)
16,36 (.644)
17,63 (.694)
90° Entry
2X MOUNTING HOLES
#4-40 UNC-2B THD
A
E
CABLE
ENTRY
B
ɀ Kit consists of 1 shell,
1 cable clamp, 1 screw, 1 nut, 2 rivnuts
(assembled)
2,77 ± 0,25
(.109 ± .010)
C
F
CABLE
ENTRY
G
H
Shell Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part Number
Non-Magnetic
DE19977-47
DA19977-40
DB19977-43
DC19977-45
DD19977-44
A
±0,38 (.015)
30,56 (1.203)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,76 (.030)
18,24 (.718)
18,24 (.718)
24,58 (.968)
30,15 (1.187)
31,75 (1.250)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
E
±0,76 (.030)
11,10 (.437)
11,10 (.437)
11,10 (.437)
11,10 (.437)
14,28 (.562)
F
±0,76 (.030)
11,10 (.437)
11,10 (.437)
15,88 (.625)
20,63 (.812)
23,01 (.906)
G
±0,76 (.030)
11,89 (.468)
11,89 (.468)
11,89 (.468)
11,89 (.468)
13,49 (.531)
H
±0,76 (.030)
7,14 (.281)
7,14 (.281)
7,14 (.281)
7,14 (.281)
8,71 (.343)
Dimensions are shown in mm (inch)
Dimensions subject to change
193
D Subminiature
Space/High Reliability
Screw Lock Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware.
Front Panel Mount
Rear Panel Mount
Product Features
ɀ Ensures positive mating
ɀ Provides locking and latching for high
vibration applications
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
SCREW
CLIP
WITH
THD
MOUNTING
PANEL
NUT
WASHER
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
LOCK
WASHER
HEX NUT
Female Screw Lock
Front Panel Mount
Rear Panel Mount
4,78 ± 0,38
(.188 ± .015)
HEX
(ACROSS FLATS)
4,78 ± 0,38
(.188 ± .015)
ɀ Kit consists of 1 nut, 3 washers, 1 lock
washer, 1 hex nut
ɀ Order 2 per connector
6,35 (.250) APPROX
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (.060) MAX PANEL
#4-40 UNC-2B THD
A
REAR FLANGE (REF)
#4-40 UNC-2A THD
NOTE:
(1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock
assemblies.
(2) A third flat washer is supplied for front panel mounting of tab shell connectors.
Part Number
Non-Magnetic Brass
Gold Finish
D20418-52
—
D20418-70
D20418-101
A
±0,38 (.015)
7,92 (.312)
12,70 (.500)
14,50 (.571)
15,88 (.625)
Male Screw Lock
SCREW
#4-40 UNC-2A THD
A
B
C
CLIP GAP
ɀ Kit consists of 1 screw and 1 clip
ɀ Order 2 per connector
Material:
Finish:
194
Copper Alloy
Gold over Copper
Shell Size
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DD
DD
DD
DD
Part Number
D20419-74
D20419-48
D20419-73
D20419-84
D20420-67
D20420-49
D20420-63
D20420-88
CLIP
A
±0,38 (.015)
14,10 (.555)
14,10 (.555)
14,10 (.555)
14,10 (.555)
16,66 (.656)
16,66 (.656)
16,66 (.656)
16,66 (.656)
B
±0,25 (.010)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,14 (.281)
7,14 (.281)
6,35 (.250)
7,14 (.281)
7,92 (.312)
C
±0,13 (.005)
1,22 (.048)
1,70 (.067)
1,70 (.067)
2,34 (.092)
1,22 (.048)
1,70 (.067)
1,22 (.048)
2,34 (.092)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
NASA/GSFC Cross Reference
NASA/GSFC
Part Number
GO8P1
GO8S1
S-311-P-4/6GCP1
S-311-P-4/6GCP2
S-311-P-4/6GCP3
S-311-P-4/6GCP4
S-311-P-4/6GCRP1
S-311-P-4/6GCRP2
S-311-P-4/6GCRP3
S-311-P-4/6GCRP4
S-311-P-4/6GCRS1
S-311-P-4/6GCRS2
S-311-P-4/6GCRS3
S-311-P-4/6GCRS4
S-311-P-4/6GCS1
S-311-P-4/6GCS2
S-311-P-4/6GCS3
S-311-P-4/6GCS4
S-311-P-4/6GHP6
S-311-P-4/6GHRP6
S-311-P-4/6GHRS6
S-311-P-4/6GHS6
311P409-1P-B-12
311P409-1P-B-15
311P409-1S-B-12
311P409-1S-B-15
311P409-2P-B-12
311P409-2P-B-15
311P409-2S-B-12
311P409-2S-B-15
311P409-3P-B-12
311P409-3P-B-15
311P409-3S-B-12
311P409-3S-B-15
311P409-4P-B-12
311P409-4P-B-15
311P409-4S-B-12
311P409-4S-B-15
311P409-5P-B-12
311P409-5S-B-15
311P409-5S-B-12
311P409-5S-B-15
S-311-P-4/10G1OP1
S-311-P-4/10G1OS1
311-P-10-B-1S-B-15
311-P-10-B-4S-B-15
311-P-10-1P-B-12
311-P-10-1P-B-15
311-P-10-1P-C-12
311-P-10-1P-C-15
311-P-10-1S-B-12
311-P-10-1S-B-15
311-P-10-1S-C-12
311-P-10-1S-C-15
311-P-10-10P-B-12
311-P-10-10P-B-15
311-P-10-10P-C-12
311-P-10-10P-C-15
311-P-10-10S-B-12
311-P-10-10S-B-15
311-P-10-10S-C-12
311-P-10-10S-C-15
311-P-10-11P-B-12
311-P-10-11P-C-15
311-P-10-11S-B-12
311-P-10-11S-C-15
311-P-10-12P-B-12
311-P-10-12P-B-15
311-P-10-12P-C-15
311-P-10-12S-B-12
ITT Cannon
Part Number
030-2042-002
031-1147-002
DM53740-17
DM53740-15
DM53740-16
DM53740-18
DM53741-12
DM53741-11
DM53741-10
DM53741-13
DM53743-18
DM53743-16
DM53743-17
DM53743-19
DM53742-18
DM53742-16
DM53742-17
DM53742-19
DM51157-8
DM51157-5005
DM51155-5005
DM51155-7
DEMA9PNMBK47FO
DEMAK9PNMBK47FO
DEMA9SNMBK47FO
DEMAK9SNMBK47FO
DEMA15PNMBK47FO
DEMAK15PNMBK47FO
DEMA15SNMBK47FO
DEMAK15SNMBK47FO
DEMA25PNMBK47FO
DEMAK25PNMBK47FO
DEMA25SNMBK47FO
DEMAK25SNMBK47FO
DEMA37PNMBK47FO
DEMAK37PNMBK47FO
DEMA37SNMBK47FO
DEMAK37SNMBK47FO
DEMA50PNMBK47FO
DEMAK50PNMBK47FO
DEMA50SNMBK47FO
DEMAK50PNMBK47FO
330-5291-081-02
031-1007-052-05
DEMB9S-NMB-76
DCMB37S-NMB-76
DEMPPNMB77
DEM-9P-NMB-76
DEM9PNMC77
DEM9PNMC76
DEM9SNMB77
DEM-9S-NMB-76
DEM-9S-NMC-77
DEM9SNMC76
DBM5W5PNMB77
DBM-5W5P-NMB-76
DBM-5W5P-NMC-77
DBM-5W5P-NMC-76
DBM-5W5S-NMB-77
DBM-5W5S-NMB-76
DBM-5W5S-NMC-77
DBM-5W5S-NMC-76
DBM-9W4P-NMB-77
DBM-9W4P-NMC-76
DBM-9W4S-NMB-77
DBM-9W4S-NMC-76
DBM13W3P-NMB-77
DBM-13W3P-NMB-76
DBM-13W3P-NMC-76
DBM-13W3S-NMB-77
NASA/GSFC
Part Number
311-P-10-12S-B-15
311-P-10-12S-C-15
311-P-10-13P-B-12
311-P-10-13P-B-15
311-P-10-13P-C-12
311-P-10-13P-C-15
311-P-10-13S-B-12
311-P-10-13S-C-12
311-P-10-13S-C-15
311-P-10-14P-B-12
311-P-10-14P-B-15
311-P-10-14S-B-12
311-P-10-14S-B-15
311-P-10-14S-C-15
311-P-10-15P-B-12
311-P-10-15P-B-15
311-P-10-15P-C-12
311-P-10-15P-C-15
311-P-10-15S-B-12
311-P-10-15S-B-15
311-P-10-15S-C-12
311-P-10-15S-C-15
311-P-10-16P-B-12
311-P-10-16P-B-15
311-P-10-16P-C-12
311-P-10-16P-C-15
311-P-10-16S-B-12
311-P-10-16S-C-12
311-P-10-16S-C-15
311-P-10-17P-B-12
311-P-10-17P-B-15
311-P-10-17P-C-12
311-P-10-17P-C-15
311-P-10-17S-B-12
311-P-10-17S-B-15
311-P-10-17S-C-12
311-P-10-17S-C-15
311-P-10-18P-B-12
311-P-10-18P-B-12
311-P-10-18P-C-15
311-P-10-18S-B-12
311-P-10-18S-B-15
311-P-10-19P-B-12
311-P-10-19S-B-12
311-P-10-19S-C-15
311-P-10-2P-B-12
311-P-10-2P-B-15
311-P-10-2P-C-12
311-P-10-2P-C-15
311-P-10-2S-B-12
311-P-10-2S-B-15
311-P-10-2S-C-15
311-P-10-2S-C-15
311-P-10-20P-B-12
311-P-10-20P-C-15
311-P-10-20S-B-12
311-P-10-20S-C-12
311-P-10-20S-C-15
311-P-10-21P-C-15
311-P-10-21S-C-15
311-P-10-22P-B-12
311-P-10-22P-B-15
311-P-10-22P-C-15
311-P-10-22S-B-12
311-P-10-22S-B-15
311-P-10-22S-C-15
311-P-10-23P-B-12
311-P-10-23S-B-12
311-P-10-23S-B-15
311-P-10-23S-C-15
ITT Cannon
Part Number
DBM13W3S-NMB-76
DBM-13W3S-NMC-76
DBM17W2PNMB77
DBM-17W2P-NMB-76
DBM17W2P-NMC-77
DBM-17W2P-NMC-76
DBM17W2SNMB77
DBM-17W2S-NMC-77
DBM-17W2S-NMC-76
DBM-21W1P-NMB-77
DBM-21W1P-NMB-76
DBM-21W1S-NMB-77
DBM-21W1S-NMB-76
DBM-21W1S-NMC-76
DCM-8W8P-NMB-77
DCM8W8PNMB76
DCM-8W8P-NMC-77
DCM8W8PNMC76
DCM-8W8S-NMB-77
DCM8W8SNMB76
DCM-8W8S-NMC-77
DCM-8W8S-MNC-76
DCM-13W6P-NMB-77
DCM-13W6P-NMB-76
DCM-13W6P-NMC-77
DCM-13W6P-NMC-76
DCM-13W6S-NMB-77
DCM-13W6S-NMC-77
DCM13W6SNMC76
DCM17W5PNMB77
DCM-17W5P-NMB-76
DCM-17W5P-NMC-77
DCM-17W5P-NMC-76
DCM-17W5S-NMB-77
DCM17W5S-NMB-76
DCM-17W5S-NMC-77
DCM-17W5S-NMC-76
DCM-21WA4P-NMB-77
DCM21WA4P-NMB-76
DCM-21WA4P-NMC-76
DCM-21WA4S-NMB-77
DCM21WA4S-NMB-76
DCM-21W4P-NMB-77
DCM-21W4S-NMB-77
DCM21W4S-NMC-76
DAM15PNMB77
DAM15PNMB76
DAM15PNMC77
DAM15PNMC76
DAM15SNMB77
DAM-15S-NMB-76
DAM-15S-NMC-76
DAM-15S-NMC-76
DCM-25W3P-NMB-77
DCM25W3P-NMB-76
DCM-25W36-NMB-77
DCM-25W3S-NMC-77
DCM-25W3S-NMC-76
DCM27W2P-NMC-76
DCM-27W2S-NMC-76
DDM-24W7P-NMB-77
DDM24W7PNMB76
DDM-24W7P-NMC-76
DDM24W7SNMB77
DDM-24W7S-NMB-76
DDM-24W7S-NMC-76
DDM-36W4P-NMB-77
DDM-36W4S-NMB-77
DDM36W4SNMB76
DDM-36W4S-NMC-76
NASA/GSFC
Part Number
311-P-10-24P-B-12
311-P-10-24S-C-12
311-P-10-24S-C-15
311-P-10-25P-C-15
311-P-10-25S-C-15
311-P-10-3S-B-12
311-P-10-3P-B-15
311-P-10-3P-C-12
311-P-10-3P-C-15
311-P-10-3S-B-12
311-P-10-3S-B-15
311-P-10-3S-C-12
311-P-10-3S-C-15
311-P-10-4P-B-12
311-P-10-4P-B-15
311-P-10-4P-C-12
311-P-10-4P-C-15
311-P-10-4S-B-12
311-P-10-4S-B-15
311-P-10-4S-C-12
311-P-10-4S-C-15
311-P-10-5P-B-12
311-P-10-5P-B-15
311-P-10-5P-C-12
311-P-10-5P-C-15
311-P-10-5S-B-12
311-P-10-5S-B-15
311-P-10-5S-C-12
311-P-10-5S-C-15
311-P-10-6P-B-12
311-P-10-6P-B-15
311-P-10-6P-C-15
311-P-10-6S-B-12
311-P-10-6P-C-15
311-P-10-7P-B-12
311-P-10-7P-B-15
311-P-10-7P-C-12
311-P-10-7P-C-15
311-P-10-7S-B-12
311-P-10-7S-B-15
311-P-10-7S-C-12
311-P-10-7S-C-15
311-P-10-8P-B-12
311-P-10-8P-B-15
311-P-10-8P-C-15
311-P-10-8S-B-12
311-P-10-8P-C-12
311-P-10-8P-C-15
311-P-10-9P-B-12
311-P-10-9P-B-15
311-P-10-9P-C-12
311-P-10-9P-C-15
311-P-10-9S-B-12
311-P-10-9S-B-15
311-P-10-9S-C-12
311-P-10-9S-C-15
311-P-10B-1S-B-12
311-P-10B-1S-C-12
311-P-10B-1S-C-15
311-P-10B-13S-B-15
311-P-10B-17S-B-15
311-P-10B-2S-B-12
311-P-10B-2S-C-12
311-P-10B-2S-C-15
311-P-10B-22S-B-15
311-P-10B-3S-B-12
311-P-10B-3S-B-15
311-P-10B-3S-C-12
311-P-10B-3S-C-15
311-P-10B-4S-B-12
ITT Cannon
Part Number
DDM43W2P-NMB-77
DDM-43W2S-NMB-77
DDM-43W2S-NMC-76
DDM47W1P-NMC-76
DDM-47W1S-NMC-76
DBM25PNMB77
DBM25PNMB76
DBM25PNMC77
DBM25PNMC76
DBM25PNMB77
DBM-25S-NMB-76
DBM-25S-NMC-77
DBM-25S-NMC-76
DCM37PNMB77
DCM37PNMB76
DCM-37P-NMC-77
DCM37PNMC76
DCM37SNMB77
DCM-37S-NMB-76
DCM-37S-NMC-77
DCM-37S-NMC-76
DDM50PNMB77
DDM50PNMB76
DDM-50P-NMC-77
DDM50PNMC76
DDM50SNMB77
DDM50SNMB76
DDM-50S-NMC-77
DDM-50S-NMC-76
DEM-5W1P-NMB-77
DEM-5W1P-NMB-76
DEM-5W1P-NMC-76
DEM-5W1S-NMB-77
DEM-5W1S-NMC-76
DAM3W3PNMC76
DAM-3W3P-NMB-76
DAM3W3P-NMC-77
DAM-3W3P-NMC-76
DAM3W3SNMB77
DAM3W3SNMB76
DAM3W3S-NMC-76
DAM-3W3S-NMC-76
DAM-7W2P-NMB-77
DAM-7W2P-NMB-76
DAM-7W2P-NMC-76
DAM-7W2S-NMB-77
DAM7W2S-NMC-77
DAM-7W2S-NMC-76
DAM-11W1P-NMB-77
DAM-11W1P-NMB-76
DAM-11W1P-NMC-77
DAM-11W1P-NMC-76
DAM-11W1S-NMB-77
DAM-11W1S-NMB-76
DAM-11W1S-NMC-77
DAM-11W1S-NMC-76
DEMB9SNMB77
DEMB-9S-NMC-77
DEMB9S-NMC-76
DBMB-17W2S-NMB-76
DCMB-17W5S-NMB-76
DAMB15SNMB77
DAMB-15S-NMC-77
DAMB15SNMC76
DDMB-247S-NMB-76
DBMB-25S-NMB-77
DBMB-25S-NMB-76
DBMB-25S-NMC-77
DBMB25SNMC76
DCMB-37S-NMB-77
Dimensions are shown in mm (inch)
Dimensions subject to change
195
D Subminiature
Space/High Reliability
NASA/GSFC Cross Reference
NASA/GSFC
Part Number
311-P-10B-4S-C-12
311-P-10B-4S-C-15
311-P-10B-5S-B-12
311-P-10B-5S-B-15
ITT Cannon
Part Number
DCMB-37S-NMC-77
DCMB37S-NMC-76
DDMB-50S-NMB-77
DDMB50S-NMB-76
NASA/GSFC
Part Number
311-P-10B-5S-C-12
311-P-10B-5S-C-15
311-P-10B-6S-B-15
311-P-10B-8S-B-12
ITT Cannon
Part Number
DDMB-50S-NMC-77
DDMB50S-NMC-76
DEMB-5W1S-NMB-76
DAMB-7W2S-NMB-77
NASA/GSFC
Part Number
311-P-10B-8S-B-15
311-P-10B-9S-B-12
ITT Cannon
Part Number
DAMB-7W2S-NMB-76
DAMB-11W1S-NMB-77
ESA/SCC Cross Reference
ESA–SCC
Part Number
340100101B DEM5W1SNMB
340100101B DAM3W3SNMB
340100101B DAM7W2SNMB
340100101B DAM11W1SNMB
340100101B DBM5W5SNMB
340100101B DBM9W4SNMB
340100101B DBM13W3SNMB
340100101B DBM17W2SNMB
340100101B DBM21W1SNMB
340100101B DCM8W8SNMB
340100101B DCM13W6SNMB
340100101B DCM17W5SNMB
340100101B DCM21WA4SNMB
340100101B DCM25W3SNMB
340100101B DCM27W2SNMB
340100101B DDM24W7SNMB
340100101B DDM36W4SNMB
340100101B DDM43W2SNMB
340100101B DDM47W1SNMB
340100101B DEM5W1PNMB
340100101B DAM3W3PNMB
340100101B DAM7W2PNMB
340100101B DAM11W1PNMB
340100101B DBM5W5PNMB
340100101B DBM9W4PNMB
340100101B DBM13W3PNMB
340100101B DBM17W2PNMB
340100101B DBM21W1PNMB
340100101B DCM8W8PNMB
340100101B DCM13W6PNMB
340100101B DCM17W5PNMB
340100101B DCM21WA4PNMB
340100101B DCM25W3PNMB
340100101B DCM27W2PNMB
340100101B DDM24W7PNMB
340100101B DDM36W4PNMB
340100101B DDM43W2PNMB
340100101B DDM47W1PNMB
340100101B DEM5W1SOL3NMB
340100101B DAM7W2SOL3NMB
340100101B DAM11W1SOL3NMB
340100101B DBM9W4SOL3NMB
340100101B DBM13W3SOL3NMB
340100101B DBM17W2SOL3NMB
340100101B DBM21W1SOL3NMB
340100101B DCM13W6SOL3NMB
340100101B DCM17W5SOL3NMB
340100101B DCM21WA4SOL3NMB
340100101B DCM25W3SOL3NMB
340100101B DCM27W2OL3NMB
340100101B DDM24W7SOL3NMB
340100101B DDM36W4SOL3NMB
340100101B DDM43W2SOL3NMB
340100101B DDM47W1SOL3NMB
340100101B DEM5W1POL3NMB
340100101B DAM3W3POL3NMB
340100101B DAM7W2POL3NMB
340100101B DAM11W1POL3NMB
340100101B DBM9W4POL3NMB
340100101B DBM13W3POL3NMB
196
ITT Cannon
Part Number
DEM5W1SNMBK52
DAM3W3SNMBK52
DAM7W2SNMBK52
DAM11W1SNMBK52
DBM5W5SNMBK52
DBM9W4SNMBK52
DBM13W3SNMBK52
DBM17W2SNMBK52
DBM21W1SNMBK52
DCM8W8SNMBK52
DCM13W6SNMBK52
DCM17W5SNMBK52
DCM21WA4SNMBK52
DCM25W3SNMBK52
DCM27W2SNMBK52
DDM24W7SNMBK52
DDM36W4SNMBK52
DDM43W2SNMBK52
DDM47W1SNMBK52
DEM5W1PNMBK52
DAM3W3PNMBK52
DAM7W2PNMBK52
DAM11W1PNMBK52
DBM5W5PNMBK52
DBM9W4PNMBK52
DBM13W3PNMBK52
DBM17W2PNMBK52
DBM21W1PNMBK52
DCM8W8PNMBK52
DCM13W6PNMBK52
DCM17W5PNMBK52
DCM21WA4PNMBK52
DCM25W3PNMBK52
DCM27W2PNMBK52
DDM24W7PNMBK52
DDM36W4PNMBK52
DDM43W2PNMBK52
DDM47W1PNMBK52
DEM5W1SOL3NMBK52
DAM7W2SOL3NMBK52
DAM11W1SOL3NMBK52
DBM9W4SOL3NMBK52
DBM13W3SOL3NMBK52
DBM17W2SOL3NMBK52
DBM21W1SOL3NMBK52
DCM13W6SOL3NMBK52
DCM17W5SOL3NMBK52
DCM21WA4SOL3NMBK52
DCM25W3SOL3NMBK52
DCM27W2OL3NMBK52
DDM24W7SOL3NMBK52
DDM36W4SOL3NMBK52
DDM43W2SOL3NMBK52
DDM47W1SOL3NMBK52
DEM5W1POL3NMBK52
DAM3W3POL3NMBK52
DAM7W2POL3NMBK52
DAM11W1POL3NMBK52
DBM9W4POL3NMBK52
DBM13W3POL3NMBK52
ESA–SCC
Part Number
340100101B DBM17W2POL3NMB
340100101B DBM21W1POL3NMB
340100101B DCM13W6POL3NMB
340100101B DCM17W5POL3NMB
340100101B DCM21WA4POL3NMB
340100101B DCM25W3POL3NMB
340100101B DCM27W2POL3NMB
340100101B DDM24W7POL3NMB
340100101B DDM36W4POL3NMB
340100101B DDM43W2POL3NMB
340100101B DDM47W1POL3NMB
340100101B DEM5W1S1A0NNMB
340100101B DAM7W2S1A0NNMB
340100101B DAM11W1S1A0NNMB
340100101B DBM9W4S1A0NNMB
340100101B DBM13W3S1A0NNMB
340100101B DBM17W2S1A0NNMB
340100101B DBM21W1S1A0NNMB
340100101B DCM13W6S1A0NNMB
340100101B DCM17W5S1A0NNMB
340100101B DCM21WA4S1A0NNMB
340100101B DCM25W3S1A0NNMB
340100101B DCM27W2S1A0NNMB
340100101B DDM24W7S1A0NNMB
340100101B DDM36W4S1A0NNMB
340100101B DDM43W2S1A0NNMB
340100101B DDM47W1S1A0NNMB
340100101B DEM5W1P1A0NNMB
340100101B DAM7W2P1A0NNMB
340100101B DAM11W1P1A0NNMB
340100101B DBM9W4P1A0NNMB
340100101B DBM13W3P1A0NNMB
340100101B DBM17W2P1A0NNMB
340100101B DBM21W1P1A0NNMB
340100101B DCM13W6P1A0NNMB
340100101B DCM17W5P1A0NNMB
340100101B DCM21WA4P1A0NNMB
340100101B DCM25W3P1A0NNMB
340100101B DCM27W2P1A0NNMB
340100101B DDM24W7P1A0NNMB
340100101B DDM36W4P1A0NNMB
340100101B DDM43W2P1A0NNMB
340100101B DDM47W1P1A0NNMB
340100101B DEM5W1S1A7NNMB
340100101B DAM7W2S1A7NNMB
340100101B DAM11W1S1A7NNMB
340100101B DBM9W4S1A7NNMB
340100101B DBM13W3S1A7NNMB
340100101B DBM17W2S1A7NNMB
340100101B DBM21W1S1A7NNMB
340100101B DCM13W6S1A7NNMB
340100101B DCM17W5S1A7NNMB
340100101B DCM21WA4S1A7NNMB
340100101B DCM25W3S1A7NNMB
340100101B DCM27W2S1A7NNMB
340100101B DDM24W7S1A7NNMB
340100101B DDM36W4S1A7NNMB
340100101B DDM43W2S1A7NNMB
340100101B DDM47W1S1A7NNMB
340100101B DEM5W1P1A7NNMB
ITT Cannon
Part Number
DBM17W2POL3NMBK52
DBM21W1POL3NMBK52
DCM13W6POL3NMBK52
DCM17W5POL3NMBK52
DCM21WA4POL3NMBK52
DCM25W3POL3NMBK52
DCM27W2POL3NMBK52
DDM24W7POL3NMBK52
DDM36W4POL3NMBK52
DDM43W2POL3NMBK52
DDM47W1POL3NMBK52
DEM5W1S1A0NNMBK52
DAM7W2S1A0NNMBK52
DAM11W1S1A0NNMBK52
DBM9W4S1A0NNMBK52
DBM13W3S1A0NNMBK52
DBM17W2S1A0NNMBK52
DBM21W1S1A0NNMBK52
DCM13W6S1A0NNMBK52
DCM17W5S1A0NNMBK52
DCM21WA4S1A0NNMBK52
DCM25W3S1A0NNMBK52
DCM27W2S1A0NNMBK52
DDM24W7S1A0NNMBK52
DDM36W4S1A0NNMBK52
DDM43W2S1A0NNMBK52
DDM47W1S1A0NNMBK52
DEM5W1P1A0NNMBK52
DAM7W2P1A0NNMBK52
DAM11W1P1A0NNMBK52
DBM9W4P1A0NNMBK52
DBM13W3P1A0NNMBK52
DBM17W2P1A0NNMBK52
DBM21W1P1A0NNMBK52
DCM13W6P1A0NNMBK52
DCM17W5P1A0NNMBK52
DCM21WA4P1A0NNMBK52
DCM25W3P1A0NNMBK52
DCM27W2P1A0NNMBK52
DDM24W7P1A0NNMBK52
DDM36W4P1A0NNMBK52
DDM43W2P1A0NNMBK52
DDM47W1P1A0NNMBK52
DEM5W1S1A7NNMBK52
DAM7W2S1A7NNMBK52
DAM11W1S1A7NNMBK52
DBM9W4S1A7NNMBK52
DBM13W3S1A7NNMBK52
DBM17W2S1A7NNMBK52
DBM21W1S1A7NNMBK52
DCM13W6S1A7NNMBK52
DCM17W5S1A7NNMBK52
DCM21WA4S1A7NNMBK52
DCM25W3S1A7NNMBK52
DCM27W2S1A7NNMBK52
DDM24W7S1A7NNMBK52
DDM36W4S1A7NNMBK52
DDM43W2S1A7NNMBK52
DDM47W1S1A7NNMBK52
DEM5W1P1A7NNMBK52
ESA–SCC
ITT Cannon
Part Number
Part Number
340100101B DAM7W2P1A7NNMB DAM7W2P1A7NNMBK52
340100101B DAM11W1P1A7NNMB DAM11W1P1A7NNMBK52
340100101B DBM9W4P1A7NNMB DBM9W4P1A7NNMBK52
340100101B DBM13W3P1A7NNMB DBM13W3P1A7NNMBK52
340100101B DBM17W2P1A7NNMB DBM17W2P1A7NNMBK52
340100101B DBM21W1P1A7NNMB DBM21W1P1A7NNMBK52
340100101B DCM13W6P1A7NNMB DCM13W6P1A7NNMBK52
340100101B DCM17W5P1A7NNMB DCM17W5P1A7NNMBK52
340100101B DCM21WA4P1A7NNMB DCM21WA4P1A7NNMBK52
340100101B DCM25W3P1A7NNMB DCM25W3P1A7NNMBK52
340100101B DCM27W2P1A7NNMB DCM27W2P1A7NNMBK52
340100101B DDM24W7P1A7NNMB DDM24W7P1A7NNMBK52
340100101B DDM36W4P1A7NNMB DDM36W4P1A7NNMBK52
340100101B DDM43W2P1A7NNMB DDM43W2P1A7NNMBK52
340100101B DDM47W1P1A7NNMB DDM47W1P1A7NNMBK52
340100101B DEM5W1S1A9NNMB DEM5W1S1A9NNMBK52
340100101B DAM7W2S1A9NNMB DAM7W2S1A9NNMBK52
340100101B DAM11W1S1A9NNMB DAM11W1S1A9NNMBK52
340100101B DBM9W4S1A9NNMB DBM9W4S1A9NNMBK52
340100101B DBM13W3S1A9NNMB DBM13W3S1A9NNMBK52
340100101B DBM17W2S1A9NNMB DBM17W2S1A9NNMBK52
340100101B DBM21W1S1A9NNMB DBM21W1S1A9NNMBK52
340100101B DCM13W6S1A9NNMB DCM13W6S1A9NNMBK52
340100101B DCM17W5S1A9NNMB DCM17W5S1A9NNMBK52
340100101B DCM21WA4S1A9NNMB DCM21WA4S1A9NNMBK52
340100101B DCM25W3S1A9NNMB DCM25W3S1A9NNMBK52
340100101B DCM27W2S1A9NNMB DCM27W2S1A9NNMBK52
340100101B DDM24W7S1A9NNMB DDM24W7S1A9NNMBK52
340100101B DDM36W4S1A9NNMB DDM36W4S1A9NNMBK52
340100101B DDM43W2S1A9NNMB DDM43W2S1A9NNMBK52
340100101B DDM47W1S1A9NNMB DDM47W1S1A9NNMBK52
340100101B DEM5W1P1A9NNMB DEM5W1P1A9NNMBK52
340100101B DAM7W2P1A9NNMB DAM7W2P1A9NNMBK52
340100101B DAM11W1P1A9NNMB DAM11W1P1A9NNMBK52
340100101B DBM9W4P1A9NNMB DBM9W4P1A9NNMBK52
340100101B DBM13W3P1A9NNMB DBM13W3P1A9NNMBK52
340100101B DBM17W2P1A9NNMB DBM17W2P1A9NNMBK52
340100101B DBM21W1P1A9NNMB DBM21W1P1A9NNMBK52
340100101B DCM13W6P1A9NNMB DCM13W6P1A9NNMBK52
340100101B DCM17W5P1A9NNMB DCM17W5P1A9NNMBK52
340100101B DCM21WA4P1A9NNMB DCM21WA4P1A9NNMBK52
340100101B DCM25W3P1A9NNMB DCM25W3P1A9NNMBK52
340100101B DCM27W2P1A9NNMB DCM27W2P1A9NNMBK52
340100101B DDM24W7P1A9NNMB DDM24W7P1A9NNMBK52
340100101B DDM36W4P1A9NNMB DDM36W4P1A9NNMBK52
340100101B DDM43W2P1A9NNMB DDM43W2P1A9NNMBK52
340100101B DDM47W1P1A9NNMB DDM47W1P1A9NNMBK52
340100101B DEM5W1SF179ANMB DEM5W1SF179ANMBK52
340100101B DAM7W2SF179ANMB DAM7W2SF179ANMBK52
340100101B DAM11W1SF179ANMB DAM11W1SF179ANMBK52
340100101B DBM9W4SF179ANMB DBM9W4SF179ANMBK52
340100101B DBM13W3SF179ANMB DBM13W3SF179ANMBK52
340100101B DBM17W2SF179ANMB DBM17W2SF179ANMBK52
340100101B DBM21W1SF179ANMB DBM21W1SF179ANMBK52
340100101B DCM13W6SF179ANMB DCM13W6SF179ANMBK52
340100101B DCM17W5SF179ANMB DCM17W5SF179ANMBK52
340100101B DCM21WA4SF179ANMBDCM21WA4SF179ANMBK52
340100101B DCM25W3SF179ANMB DCM25W3SF179ANMBK52
340100101B DCM27W2SF179ANMB DCM27W2SF179ANMBK52
340100101B DDM24W7SF179ANMB DDM24W7SF179ANMBK52
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Space/High Reliability
ESA/SCC Cross Reference
ESA–SCC
ITT Cannon
Part Number
Part Number
340100101B DDM36W4SF179ANMB DDM36W4SF179ANMBK52
340100101B DDM43W2SF179ANMB DDM43W2SF179ANMBK52
340100101B DDM47W1SF179ANMB DDM47W1SF179ANMBK52
340100101B DEM5W1PF179ANMB DEM5W1PF179ANMBK52
340100101B DAM7W2PF179ANMB DAM7W2PF179ANMBK52
340100101B DAM11W1PF179ANMB DAM11W1PF179ANMBK52
340100101B DBM9W4PF179ANMB DBM9W4PF179ANMBK52
340100101B DBM13W3PF179ANMB DBM13W3PF179ANMBK52
340100101B DBM17W2PF179ANMB DBM17W2PF179ANMBK52
340100101B DBM21W1PF179ANMB DBM21W1PF179ANMBK52
340100101B DCM13W6PF179ANMB DCM13W6PF179ANMBK52
340100101B DCM17W5PF179ANMB DCM17W5PF179ANMBK52
340100101B DCM21WA4PF179ANMBDCM21WA4PF179ANMBK52
340100101B DCM25W3PF179ANMB DCM25W3PF179ANMBK52
340100101B DCM27W2PF179ANMB DCM27W2PF179ANMBK52
340100101B DDM24W7PF179ANMB DDM24W7PF179ANMBK52
340100101B DDM36W4PF179ANMB DDM36W4PF179ANMBK52
340100101B DDM43W2PF179ANMB DDM43W2PF179ANMBK52
340100101B DDM47W1PF179ANMB DDM47W1PF179ANMBK52
340100101B DEM9SNMB
DEM9SNMBK52
340100101B DAM15SNMB
DAM15SNMBK52
340100101B DBM25SNMB
DBM25SNMBK52
340100101B DCM37SNMB
DCM37SNMBK52
340100101B DDM50SNMB
DDM50SNMBK52
340100101B DEM9PNMB
DEM9PNMBK52
340100101B DAM15PNMB
DAM15PNMBK52
340100101B DBM25PNMB
DBM25PNMBK52
340100101B DCM37PNMB
DCM37PNMBK52
340100101B DDM50PNMB
DDM50PNMBK52
340100101B DEM9SOL3NMB
DEM9SOL3NMBK52
340100101B DAM15SOL3NMB
DAM15SOL3NMBK52
340100101B DBM25SOL3NMB
DBM25SOL3NMBK52
340100101B DCM37SOL3NMB
DCM37SOL3NMBK52
340100101B DDM50SOL3NMB
DDM50SOL3NMBK52
340100101B DEM9POL3NMB
DEM9POL3NMBK52
340100101B DAM15POL3NMB
DAM15POL3NMBK52
340100101B DBM25POL3NMB
DBM25POL3NMBK52
340100101B DCM37POL3NMB
DCM37POL3NMBK52
340100101B DDM50POL3NMB
DDM50POL3NMBK52
340100101B DEM9S1A0NNMB
DEM9S1A0NNMBK52
340100101B DAM15S1A0NNMB
DAM15S1A0NNMBK52
340100101B DBM25S1A0NNMB
DBM25S1A0NNMBK52
340100101B DCM37S1A0NNMB
DCM37S1A0NNMBK52
340100101B DDM50S1A0NNMB
DDM50S1A0NNMBK52
340100101B DEM9P1A0NNMB
DEM9P1A0NNMBK52
340100101B DAM15P1A0NNMB
DAM15P1A0NNMBK52
340100101B DBM25P1A0NNMB
DBM25P1A0NNMBK52
340100101B DCM37P1A0NNMB
DCM37P1A0NNMBK52
340100101B DDM50P1A0NNMB
DDM50P1A0NNMBK52
340100101B DEM9S1A7NNMB
DEM9S1A7NNMBK52
340100101B DAM15S1A7NNMB
DAM15S1A7NNMBK52
340100101B DBM25S1A7NNMB
DBM25S1A7NNMBK52
340100101B DCM37S1A7NNMB
DCM37S1A7NNMBK52
340100101B DDM50S1A7NNMB
DDM50S1A7NNMBK52
340100101B DEM9P1A7NNMB
DEM9P1A7NNMBK52
340100101B DAM15P1A7NNMB
DAM15P1A7NNMBK52
340100101B DBM25P1A7NNMB
DBM25P1A7NNMBK52
340100101B DCM37P1A7NNMB
DCM37P1A7NNMBK52
340100101B DDM50P1A7NNMB
DDM50P1A7NNMBK52
340100101B DEM9S1A9NNMB
DEM9S1A9NNMBK52
ESA–SCC
Part Number
340100101B DAM15S1A9NNMB
340100101B DBM25S1A9NNMB
340100101B DCM37S1A9NNMB
340100101B DDM50S1A9NNMB
340100101B DEM9P1A9NNMB
340100101B DAM15P1A9NNMB
340100101B DBM25P1A9NNMB
340100101B DCM37P1A9NNMB
340100101B DDM50P1A9NNMB
340100101B DEM9SF179ANMB
340100101B DAM15SF179ANMB
340100101B DBM25SF179ANMB
340100101B DCM37SF179ANMB
340100101B DDM50SF179ANMB
340100101B DEM9PF179ANMB
340100101B DAM15PF179ANMB
340100101B DBM25PF179ANMB
340100101B DCM37PF179ANMB
340100101B DDM50PF179ANMB
340100102B DEMA9SNMB
340100102B DAMA15SNMB
340100102B DBMA25SNMB
340100102B DCMA37SNMB
340100102B DDMA50SNMB
340100102B DEMA9PNMB
340100102B DAMA15PNMB
340100102B DBMA25PNMB
340100102B DCMA37PNMB
340100102B DDMA50PNMB
340102217B
340102218B
340102219B
340102220B
340102221B
340102222B
340102223B
340102224B
340104001B
340104003B
340104005B
340104002B
340104004B
340104006B
340104007B
340104008B
340104009B
340104010B
340104011B
340104012B
340100401B
340100405B
340100409B
340100402B
340100406B
340100410B
340100403B
340100407B
340100404B
340100408B
340100411B
ITT Cannon
Part Number
DAM15S1A9NNMBK52
DBM25S1A9NNMBK52
DCM37S1A9NNMBK52
DDM50S1A9NNMBK52
DEM9P1A9NNMBK52
DAM15P1A9NNMBK52
DBM25P1A9NNMBK52
DCM37P1A9NNMBK52
DDM50P1A9NNMBK52
DEM9SF179ANMBK52
DAM15SF179ANMBK52
DBM25SF179ANMBK52
DCM37SF179ANMBK52
DDM50SF179ANMBK52
DEM9PF179ANMBK52
DAM15PF179ANMBK52
DBM25PF179ANMBK52
DCM37PF179ANMBK52
DDM50PF179ANMBK52
DEMA9SNMBK52
DAMA15SNMBK52
DBMA25SNMBK52
DCMA37SNMBK52
DDMA50SNMBK52
DEMA9PNMBK52
DAMA15PNMBK52
DBMA25PNMBK52
DCMA37PNMBK52
DDMA50PNMBK52
DA19678-174
DB19678-175
DC19678-173
DD19678-176
DA19678-157
DB19678-171
DC19678-162
DD19678-172
DM115224-1040A
DM115224-1020A
DM115224-1010A
DM115224-2040A
DM115224-2020A
DM115224-2010A
DM115224-3040A
DM115224-4040A
DM115224-3020A
DM115224-4020A
DM115224-3010A
DM115224-4010A
DM115740-5036
DM115740-5046
DM115740-5047
DM115742-5028
DM115742-5039
DM115742-5075
DM115741-5048
DM115741-5032
DM115743-5064
DM115743-5040
DM115740-19
ESA–SCC
Part Number
340100415B
340100419B
340100412B
340100416B
340100420B
340100413B
340100417B
340100414B
340100418B
340102207B
340102208B
340102209B
340102210B
340102211B
340102212B
340102213B
340102214B
340102215B
340102216B
340102201B
340102206B
340102258B
340102202B
340102203B
340102204B
340102205B
340102244B
340102245B
340102246B
340102247B
340102225B
340102226B
340102227B
340102228B
340102239B
340102240B
340102241B
340102242B
340102243B
340102234B
340102235B
340102236B
340102237B
340102238B
340102229B
340102230B
340102231B
340102232B
340102233B
340100501B
340100502B
340100503B
340100504B
340100505B
340100506B
340100507B
340100508B
ITT Cannon
Part Number
DM115740-13
DM115740-12
DM115742-15
DM115742-14
DM115742-13
DM115741-7
DM115741-8
DM115743-20
DM115743-22
DE-59-20
DE-60-20
DA-59-20
DA-60-20
DB-59-20
DB-60-20
DC-59-20
DC-60-20
DD-59-20
DD-60-20
D20418-52
D115418-70
D20418-101
D20419-74
D20419-48
D20420-67
D20420-49
D20419-73
D20419-84
D20420-63
D20420-88
DA19678-167
DB19678-168
DC19678-138
DD19678-161
DE19977-47
DA19977-40
DB19977-43
DC19977-45
DD19977-44
DE24657-16
DA24658-15
DB24659-15
DC24660-16
DD24661-13
DE115386-101A
DA115386-104A
DB115386-102A
DC115386-100A
DD115386-103A
030-8882-002
031-8944-000
030-8848-020
031-8787-020
330-8782-001
031-8843-001
330-8944-000
031-8902-000
Dimensions are shown in mm (inch)
Dimensions subject to change
197
D Subminiature
Accessories
Selection Guide
Backshell
EMI Shielded
EMI Shielded
EMI Shielded
Metal
Metal
Metal
Metal
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Style
Snap-Together
Metalized Plastic
Straight Exit
see page 200
Snap-Together
Metalized Plastic
40° Exit
see page 200
Die Cast Zinc
Metal
see page 202
Deep Straight
Clamp
see page 203
Round Cable
Clamp
see page 203
Short Straight
Clamp
see page 204
90° Entry
see page 204
Snap-Together
Universal
see page 205
One-Piece
Snap-Together
see page 205
One-Piece Plastic
Straight Exit
see page 206
One-Piece Plastic
90° Exit
see page 206
Dataphone
see page 206
Quick Disconnect
for IDC Cable
see page 207
Quick Disconnect for
Round Cable —
Straight and 90° Exit
see page 207
Locking Hardware
Sliding Lock
Retainer Assembly
Slide Lock Post
see page 210
see page 211
—
—
Female Screw Lock
see page 209
—
Male Screw Lock
see page 208
—
Spring Latch Plate
see page 212
—
Spring Latch
see page 212
—
—
—
—
—
—
—
—
។
—
—
—
—
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
ɀ
—
—
—
—
—
។
—
—
—
—
—
—
ɀ
ɀ
ɀ
ɀ
—
—
ɀ
ɀ
ɀ
ɀ
—
។
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
។ Supplied with backshell
ɀ Optional, compatible locking hardware
— Not compatible
198
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Accessories
Selection Guide
Locking Hardware
Locking Hook
see page 207
—
Locking Spring
see page 207
—
Jackscrew Assembly
see page 213
—
Jackpost Assembly
see page 213
—
Recessed Jackscrew
see page 201
ɀ
Extended Jackscrew
see page 201
ɀ
Thumbscrew
see page 201
ɀ
Jackpost for
In-Line Connections
see page 201
ɀ
—
—
—
—
ɀ
ɀ
ɀ
ɀ
—
—
—
—
—
—
—
—
—
—
—
ɀ
—
—
—
—
—
—
—
ɀ
—
—
—
—
—
—
—
ɀ
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ɀ
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ɀ
ɀ
—
—
—
—
—
—
ɀ
ɀ
—
—
—
—
—
—
Dimensions are shown in mm (inch)
Dimensions subject to change
199
D Subminiature Accessories
EMI Shielded Backshell
Snap-Together Metalized Plastic
Metalized plastic backshells reduce EMI/RFI
emissions.
Metalized plastic provides a light weight solution.
Design includes integral strain relieving cable
clamp.
CABLE
CLAMP
CABLE
GROUNDING
TANG
Product Features
ɀ Improves conformance to FCC DOC #20780
shielding requirements
ɀ No crimp ferrule tooling needed
ɀ Quick and simple assembly using snaptogether design feature
Attenuation
Note: Cable grounding tang not available on DE size backshell.
Specifications
Attenuation:
Temperature Range:
Materials and Finishes
−49dB @ 100 MHz
−20° C to 80° C
Material:
Finish:
Thermoplastic, UL 94V-0 rated
Nickel over Copper
Straight Exit
C
D
ØH
MAX
E
A
16,99±0,30
(.669±.012)
B
ɀ Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
ɀ Optional locking hardware sold separately,
see page 201.
Shell
Part
A
Size Layout
Number
±0,15 (.006)
DE
9 DE121073-154 24,95 (.982)
DA
15 DA121073-150 33,30 (1.311)
DB
25 DB121073-151 47,00 (1.850)
DC
37 DC121073-152 63,45 (2.498)
DD
50 DD121073-153 61,10 (2.410)
B
±0,30 (.012)
30,81 (1.213)
39,09 (1.539)
53,01 (2.087)
69,29 (2.728)
66,90 (2.634)
40° Exit
C
±0,30 (.012)
23,70 (.933)
31,80 (1.252)
45,01 (1.772)
60,30 (2.374)
58,30 (2.295)
D
±0,30 (.120)
16,00 (.630)
16,00 (.630)
16,00 (.630)
16,00 (.630)
19,00 (.748)
E
±0,20 (.008)
35,99 (1.417)
42,00 (1.654)
42,00 (1.654)
42,00 (1.654)
42,00 (1.654)
XH
Max.
7,32 (.288)
8,31 (.327)
10,52 (.414)
12,32 (.485)
13,00 (.512)
D
E
ɀ Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
ɀ Optional locking hardware sold separately,
see page 201.
200
Shell
Part
Size Layout
Number
DE
9
DE121073-54
DA
15 DA121073-50
DB
25 DB121073-51
DC
37 DC121073-52
DD
50 DD121073-53
B
±0,30 (.012)
35,99 (1.417)
44,29 (1.744)
57,99 (2.283)
74,50 (2.933)
72,97 (2.873)
C
±0,30 (.012)
22,00 (.866)
27,31 (1.075)
41,00 (1.614)
57,51 (2.264)
54,99 (2.165)
D
±0,30 (.012)
16,00 (.630)
16,00 (.630)
16,00 (.630)
16,00 (.630)
19,00 (.748)
E
±0,20 (.008)
35,99 (1.417)
42,01 (1.654)
42,01 (1.654)
42,01 (1.654)
42,01 (1.654)
Cable Diameter
Min.
Max.
3,51 (.138)
7,49 (.295)
6,50 (.256)
8,99 (.354)
6,50 (.256)
11,00 (.433)
6,50 (.256)
11,00 (.433)
8,99 (.354)
13,00 (.512)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
EMI Shielded Backshell
Locking Hardware for Snap-Together EMI Shielded Backshell
Recessed Jackscrew
4,50
(.177)
Ø 4,50
(.177)
Part Number:
Material:
Finish:
Quantity Required
per Connector:
Extended Jackscrew
13,50(.531)
9,00
(.354)
#4-40
THREADS
6,00
(.236)
MIN
250-8501-004
Brass
Nickel
2
Thumbscrew
19,00(.748)
4,30
9,00
(.354)
(.169)
Ø 4,10
(.161)
Part Number:
Material:
Finish:
Quantity Required
per Connector:
THREADS
6,00
(.236)
MIN
250-8501-009 (M3)
250-8501-010 (#4-40)
Brass
Nickel
Part Number:
Material:
Finish:
Quantity Required
per Connector:
250-8501-013
Brass
Nickel
2
2
Jackpost for In-Line Connections
Rectangular Nut
Jackpost Assembly
Jackpost
11,00
(.433)
6,00
(.236)
#4-40 UNC-2B
#4-40 UNC-2A
4,90 (.193)
3,00 (.118)
MIN
5,00
(.197)
(ACROSS FLATS)
ɀ Assembly consists of 1 rectangular nut,
1 jackpost, 1 #4-40 lock washer.
Part Number:
Material:
Finish:
Quantity Required
per Connector:
D121073-19
Brass
Nickel
2
Dimensions are shown in mm (inch)
Dimensions subject to change
201
D Subminiature Accessories
EMI Shielded Backshell
Die Cast Zinc Metal Backshell
Straight Exit
9 and 15 Position
25 Position
37 and 50 Position
C
C
C
B
B
B
A
A
A
D
D
D
ØE
Product Features
ɀ Improves conformance to FCC DOC #20780
shielding requirements
ɀ No crimp ferrule tooling needed
ɀ Kit consists of 1 front shell, 1 rear shell,
2 screws, 2 hex nuts, 2 mounting screws,
2 end brackets, 1 set of compression inserts
(see this page)
F
F
F
Die cast metal backshells reduce EMI/RFI
emissions.
Die cast metal backshells offer improved shielding
in a rugged package.
ØE
ØE
Shell
Part
A
Size Layout
Number
±0,13 (.005)
DE
9
980-2000-345 31,12 (1.225)
DA
15 980-2000-346 39,12 (1.540)
DB
25 980-2000-347 53,09 (2.090)
DC
37 980-2000-348 69,34 (2.730)
DD
50 980-2000-349 66,70 (2.626)
B
±0,13 (.005)
37,21 (1.465)
40,64 (1.600)
39,37 (1.550)
45,72 (1.800)
45,72 (1.800)
Specifications
C
±0,13 (.005)
15,75 (.620)
15,75 (.620)
17,53 (.690)
21,95 (.864)
21,95 (.864)
XE
±0,13 (.005)
10,16 (.400)
10,16 (.400)
13,34 (.525)
18,44 (.726)
18,44 (.726)
D
±0,13 (.005)
15,75 (.620)
15,75 (.620)
15,75 (.620)
15,75 (.620)
18,54 (.730)
F
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,17 (1.857)
63,50 (2.500)
61,11 (2.406)
Materials and Finishes
Attenuation:
Temperature Range:
–50 dB @ 1000 MHz
–20° C to 80° C
Backshell Material:
Backshell Finish:
Compression Inserts:
Hardware Material:
Hardware Finish:
Attenuation
Diecast Shell Shielding Performance
0
Zinc
Clear Zinc
PVC
Steel
Clear Zinc
-10
-20
-30
db
-40
-50
-60
-70
100
1,000
Mhz
Compression Inserts (Included With Die Cast Zinc Metal Backshell)
Compression inserts accommodate a wide variety
of cable sizes.
Position
9, 15
25
37, 50
9 and 15 Position*
25 Position*
37 and 50 Position*
1
Cable Diameter
.190/.350
.190/.460
.300/.680
1
2
6
2
3
5
3
5
4
3
2
1
4
4
5
* Inserts may be supplied mirror image
#1
Position
9, 15
25
37, 50
202
O.D.
12,07 (.475)
15,24 (.600)
16,64 (.655)
#2
I.D.
8,13 (.320)
11,43 (.450)
14,48 (.570)
O.D.
9,14 (.360)
11,43 (.450)
17,78 (.700)
#3
I.D.
8,00 (.315)
10,41 (.410)
15,75 (.620)
O.D.
9,14 (.360)
11,43 (.450)
20,57 (.810)
#4
I.D.
6,48 (.255)
9,40 (.370)
16,51 (.650)
O.D.
9,14 (.360)
11,43 (.450)
16,64 (.655)
#5
I.D.
7,24 (.285)
7,62 (.300)
12,70 (.500)
O.D.
9,14 (.360)
11,43 (.450)
16,64 (.655)
#6
I.D.
5,33 (.210)
5,84 (.230)
10,80 (.425)
O.D.
—
—
16,64 (.655)
I.D.
—
—
8,89 (.350)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Metal Backshell
Metal Backshell
Metal Backshells provide strain relief.
Various profiles available for different cable routing
requirements.
Product Features
ɀ Qualified to MIL-Spec M85049
Materials and Finishes
Backshell Material:
Finish:
Low Carbon Steel
Yellow Chromate over
Cadmium
Steel
Hardware Material:
Deep Straight Clamp
2X Ø 3,45
(.136)
E
CABLE
ENTRY
H MAX
G
0,38 ± ,013
(.015 ± .005)
D MAX
B
C
A
F
CABLE
ENTRY
ɀ Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part
Number
DE24657
DA24658
DB24659
DC24660
DD24661
Mil Spec
Part Number
M85049/48-1-1
M85049/48-1-2
M85049/48-1-3
M85049/48-1-4
M85049/48-1-5
A
±0,38 (.015)
30,56 (1.203)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,572 (.0225)
12,484 (.4915)
12,484 (.4915)
12,484 (.4915)
12,484 (.4915)
15,253 (.6005)
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
max.
14,68 (.578)
14,68 (.578)
14,68 (.578)
14,68 (.578)
17,45 (.687)
E
±0,38 (.015)
9,53 (.375)
18,11 (.713)
25,40 (1.000)
34,93 (1.375)
35,71 (1.406)
F
±0,38 (.015)
9,53 (.375)
7,93 (.312)
7,93 (.312)
7,93 (.312)
10,31 (.406)
G
±0,38 (.015)
19,05 (.750)
19,05 (.750)
25,40 (1.000)
25,40 (1.000)
28,57 (1.125)
H
max.
31,75 (1.250)
31,75 (1.250)
39,70 (1.563)
39,70 (1.563)
42,88 (1.688)
Round Cable Clamp
A
C
E
2X Ø 3,05
(.120)
G
F
Ø D MAX
CABLE ENTRY
B
0,38 ± 0,13
(.015 ± .005)
ɀ Kit consists of 1 shell, 2 screws, 2 hex nuts
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part
Number
DE44994
DA20961
DB20962
DC20963
DD20964
Mil Spec
Part Number
M85049/48-2-1
M85049/48-2-2
M85049/48-2-3
M85049/48-2-4
M85049/48-2-5
A
±0,38 (.015)
30,68 (1.208)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
XD
max.
10,31 (.406)
10,31 (.406)
15,06 (.593)
18,23 (.718)
20,62 (.812)
E
±0,38 (.015)
16,79 (.661)
24,99 (.984)
38,48 (1.515)
55,14 (2.171)
53,16 (2.093)
F
±0,38 (.015)
3,18 (.125)
3,18 (.125)
4,75 (.187)
6,35 (.250)
7,92 (.312)
G
±0,76 (.030)
26,18 (1.031)
26,18 (1.031)
26,98 (1.062)
26,98 (1.062)
26,98 (1.062)
Dimensions are shown in mm (inch)
Dimensions subject to change
203
D Subminiature Accessories
Metal Backshell
Short Straight Clamp
2X Ø 3,05
(.120)
A
C
G
12,30 ± 0,38
(.484 ± .015)
B
0,38 ± 0,13
(.015 ± .005)
F
ɀ Kit consists of 1 shell, 2 or 3 screws,
2 or 3 hex nuts
Shell
Size
DA
DB
DC
DD
Layout
15
25
37
50
Part
Number
DA19678-1
DB19678-2
DC19678-3
DD19678-4
Mil Spec
Part Number
M85049/48-3-2
M85049/48-3-3
M85049/48-3-4
M85049/48-3-5
E
CABLE
ENTRY
No. of
Cable Locking
Screws Included
2
2
3
3
A
±0,38 (.015)
38,88 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
±0,13 (.005)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
E
±0,38 (.015)
7,51 (.296)
7,51 (.296)
7,51 (.296)
9,91 (.390)
F
±0,38 (.015)
7,93 (.312)
20,22 (.796)
17,45 (.687)
17,45 (.687)
G
±0,89 (.035)
16,36 (.644)
16,36 (.644)
16,36 (.644)
17,63 (.694)
DE-9 is not available.
90° Entry
E
CABLE
ENTRY
2X MOUNTING HOLES
#4-40 UNC-2B THD
A
B
2,77 ± 0,25
(.109 ± .010)
ɀ Kit consists of 1 shell, 1 cable clamp, 1 screw,
1 nut, 2 rivnuts (assembled)
F
CABLE
ENTRY
G
C
H
Shell
Size
DE
DA
DB
DC
DD
204
Layout
9
15
25
37
50
Part
Number
DE19977-5
DA19977-1
DB19977-2
DC19977-3
DD19977-4
Mil Spec
Part Number
M85049/50-1
M85049/50-2
M85049/50-3
M85049/50-4
M85049/50-5
A
±0,38 (.015)
30,56 (1.203)
38,89 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,76 (.030)
18,24 (.718)
18,24 (.718)
24,58 (.968)
30,15 (1.187)
31,75 (1.250)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
E
±0,76 (.030)
11,10 (.437)
11,10 (.437)
11,10 (.437)
11,10 (.437)
14,28 (.562)
F
±0,76 (.030)
11,10 (.437)
11,10 (.437)
15,88 (.625)
20,63 (.812)
23,01 (.906)
G
±0,76 (.030)
11,89 (.468)
11,89 (.468)
11,89 (.468)
11,89 (.468)
13,49 (.531)
H
±0,76 (.030)
7,14 (.281)
7,14 (.281)
7,14 (.281)
7,14 (.281)
8,71 (.343)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Plastic Backshell
Plastic Backshell
Snap-Together Universal
Ø B MAX
CABLE ENTRY
42,50
(1.673)
39,50
(1.555)
C
D
ɀ A 2-piece snap-together design for quick
assembly
ɀ Customer furnishes tie-wrap
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
XB
max.
7,01 (.276)
9,60 (.378)
11,61 (.457)
13,00 (.512)
16,00 (.630)
Part
Number
DE115339-20
DA115339-21
DB115339-22
DC115339-23
DD115339-24
C
±0,20 (.008)
17,00 (.669)
17,00 (.669)
17,00 (.669)
17,00 (.669)
19,81 (.780)
D
±0,20 (.008)
19,51 (.768)
27,79 (1.094)
41,61 (1.638)
57,99 (2.283)
52,32 (2.060)
One-Piece Snap-Together
A
C
16,21
(.638)
48,00
(1.890)
E
CLAMP,
THERMOPLASTIC
CLAMP,
METAL
ɀ
ɀ
ɀ
ɀ
Low cost
Easy to assemble
Mounting hardware included
2 thumbscrews, 2 cable clamps
Materials and Finishes
Backshell Material: Polypropylene
Hardware Material: Steel
Hardware Finish: Yellow chromate over zinc
Shell
Size
DE
DA
DB
Layout
9
15
25
Part
Number
DEBS-9
DABS-15
DBBS-25
Ø D MAX
CABLE ENTRY
A
35,20 (1.386)
43,31 (1.705)
57,20 (2.252)
C
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
XD
max.
5,69 (.224)
5,69 (.224)
6,50 (.256)
E
27,51 (1.083)
31,19 (1.228)
38,30 (1.508)
DC-37 and DD-50 are not available.
Dimensions are shown in mm (inch)
Dimensions subject to change
205
D Subminiature Accessories
Plastic Backshell
One-Piece Plastic
Straight Exit
G
CABLE
ENTRY
B
ɀ Kit consists of 1 shell, 1 cable clamp,
1 set screw
ɀ Mounting hardware included
ɀ 2 screws #4-24 x 5/16 long self-tapping
ɀ Accommodates spring latches
Materials and Finishes
Backshell Material:
Hardware Material:
Hardware Finish:
Black Thermoplastic,
UL 94V-2 rated
Steel
Yellow Chromate over
Cadmium or Zinc
C
ØE
CABLE
ENTRY
A
F
CABLE
ENTRY
D
Shell
Part
A
B
Size Layout Number ±0,38 (.015) ±0,38 (.015)
DE
9 DE51218 30,94 (1.218) 25,40 (1.000)
DA 15 DA51210 39,27 (1.546) 25,40 (1.000)
DB 25 DB51212 53,16 (2.093) 31,75 (1.250)
DC 37 DC51214 69,44 (2.734) 38,10 (1.500)
DD 50 DD51216 67,06 (2.640) 38,10 (1.500)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
90° Exit
D
XE
±0,38 (.015) ±0,25 (.010)
12,70 (.500)
7,14 (.281)
12,70 (.500)
9,14 (.360)
12,70 (.500)
—
12,70 (.500)
—
15,47 (.609)
—
K
CABLE
ENTRY
ØH
CABLE
ENTRY
A
B
ɀ Kit consists of 1 shell, 1 cable clamp,
1 set screw
ɀ Mounting hardware included
ɀ 2 screws #4-24 x 5/16 long self-tapping
Materials and Finishes
Backshell Material:
Hardware Material:
Hardware Finish:
Black Thermoplastic,
UL 94V-2 rated
Steel
Yellow Chromate over
Cadmium or Zinc
F
G
±0,25 (.010) ±0,25 (.010)
—
—
—
—
12,52 (.493)
9,15 (.360)
17,63 (.694)
9,15 (.360)
18,64 (.734) 11,89 (.468)
J
CABLE
ENTRY
C
D
Shell
Part
A
B
Size Layout Number ±0,38 (.015) ±0,38 (.015)
DE
9 DE51219 37,95 (1.494) 25,40 (1.000)
DA 15 DA51211 46,28 (1.822) 25,40 (1.000)
DB 25 DB51213 60,15 (2.368) 31,75 (1.250)
DC 37 DC51215 76,43 (3.009) 38,10 (1.500)
DD 50 DD51217 74,04 (2.915) 38,10 (1.500)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
XH
±0,38 (.015) ±0,25 (.010)
12,70 (.500)
7,14 (.281)
12,70 (.500)
9,14 (.360)
12,70 (.500)
—
12,70 (.500)
—
15,47 (.609)
—
J
K
±0,25 (.010) ±0,25 (.010)
—
—
—
—
12,52 (.493)
9,15 (.360)
17,63 (.694)
9,15 (.360)
18,64 (.734) 11,89 (.468)
Dataphone
56,34 - 55,55
(2.218 - 2.187)
20,22 - 19,43
(.796 - .765)
45,72 - 45,21
(1.800 - 1.780)
36,09 - 35,31
(1.421 - 1.390)
ɀ Available in 25 position only
ɀ Mounting hardware included
ɀ 2 screws #4-40 x 11/16 long
Materials and Finishes
Backshell Material:
Hardware Material:
Hardware Finish:
206
Black Thermoplastic,
UL 94V-0 rated
Steel
Clear Chromate over
Cadmium or Zinc
11,18 - 10,41
(.440 - .410)
3,81 - 3,56
(.150 - .140)
Shell
Size
DB
Layout
25
47,04(1.852)
Part
Number
DB51226-1B
# 4-40 THREADS
Max. Cable
Entry
7,92 (.312)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Plastic Backshell
Quick Disconnect for IDC Cable
IDC
E
CABLE
ENTRY
2,60 ± 0,20
(.102 ± .008)
LOCKING
SPRING*
40,54
(1.596)
C
ɀ Kit consists of 1 front shell, 1 rear shell,
2 strain reliefs, 5 screws
16,31
(.642)
LOCKING
HOOK*
A
* Order optional locking hardware separately.
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
Shell
Size
DE
DA
DB
DC
Part
Number
DE115386-1B
DA115386-2B
DB115386-3B
DC115386-4B
Layout
9
15
25
37
A
max.
40,69 (1.602)
49,00 (1.929)
62,69 (2.468)
79,20 (3.118)
C
±0,13 (.005)
24,99 (.984)
33,30 (1.311)
47,04 (1.852)
63,50 (2.500)
E
±0,20 (.008)
14,99 (.590)
23,29 (.917)
36,98 (1.456)
53,49 (2.106)
Quick Disconnect for Round Cable
Straight and 90° Exit
E
CABLE
ENTRY
MIN
13,00 (.512)
MAX
LOCKING
SPRING*
B
MAX
16,10 (.634) MAX
7,00 (.276) MAX
C
A
MAX
LOCKING
HOOK*
ɀ Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 1 spacer, 4 self-tapping
screws, 2 machined screws
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
F
CABLE
ENTRY
MIN
D
MAX
* Order optional locking hardware separately.
Shell
Part
Size Layout
Number
DE
9
DE115339
DA
15
DA115339-1
DB
25
DB115339-2
DC
37
DC115339-3
DD
50
DD115339-4
A
max.
41,33 (1.627)
49,63 (1.954)
63,65 (2.506)
79,86 (3.144)
77,57 (3.054)
B
max.
32,41 (1.276)
32,41 (1.276)
40,44 (1.592)
42,42 (1.670)
42,42 (1.670)
C
±0,15 (.006)
25,00 (.984)
33,30 (1.311)
47,04 (1.852)
63,50 (2.500)
61,10 (2.406)
D
max.
16,51 (.650)
16,51 (.650)
16,51 (.650)
16,51 (.650)
19,51 (.768)
E
min.
7,70 (.303)
7,70 (.303)
7,70 (.303)
7,70 (.303)
10,69 (.421)
F
min.
6,70 (.264)
6,70 (.264)
17,70 (.697)
17,70 (.697)
17,70 (.697)
Optional Locking Hardware/Mechanism
Optional hardware provides quick disconnect for
either flat IDC cable or round jacketed cable.
Locking Hook
Locking Spring
ɀ Order 2 per connector
Material:
Corrosion-resistant steel
Lock Hook
Part Number
015-8755-000
015-8755-001
Lock Spring
Part Number
259-8760-000
NOTE: Not for use on rear panel mounted connectors.
Dimensions are shown in mm (inch)
Dimensions subject to change
207
D Subminiature Accessories
Locking Hardware
Screw Lock Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware.
Refer to the accessories selection guide on pages
198-199 for use with ITT Cannon backshells.
Front Panel Mount
Rear Panel Mount
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
Product Features
ɀ Ensures positive mating
ɀ Provides locking and latching for high
vibration applications
SCREW
CLIP
WITH
THD
MOUNTING
PANEL
NUT
WASHER
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
LOCK
WASHER
HEX NUT
Male Screw Lock
SCREW
#4-40 UNC-2A THD
A
B
C
CLIP GAP
ɀ Kit consists of 1 screw and 1 clip
ɀ Order 2 per connector
Material:
Finish:
208
Steel
Yellow Chromate over
Cadmium or Zinc
Shell Size
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DD
DD
DD
DD
Part
Number
D20419
D20419-18
D20419-21
D20419-104
D20420
D20420-13
D20420-15
D20420-86
CLIP
A
±0,38 (.015)
14,10 (.555)
14,10 (.555)
14,10 (.555)
14,10 (.555)
16,66 (.656)
16,66 (.656)
16,66 (.656)
16,66 (.656)
B
±0,25 (.010)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
C
±0,13 (.005)
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Female Screw Lock
Locking Hardware
Front Panel Mount
Rear Panel Mount
4,78 ± 0,38
(.188 ± .015)
HEX
(ACROSS FLATS)
4,78 ± 0,38
(.188 ± .015)
6,35 (.250) APPROX
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (.060) MAX PANEL
#4-40 UNC-2B THD
A
REAR FLANGE (REF)
#4-40 UNC-2A THD
ɀ Kit consists of 1 nut, 3 washers, 1 lock
washer, 1 hex nut
ɀ Order 2 per connector
Material:
Steel
NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw
lock assemblies.
(2) A third flat washer is supplied for front panel mounting of tab shell connectors.
Yellow Chromate
over Cadmium
D20418-2
D20418-50
D20418-39
D20418-74
Mil Spec
Part Number
M24308/26-1
—
M24308/26-2
—
Zinc With
Clear Chromate
D20418-80
—
—
—
Female Screw Lock for High Volume Applications
3,80 (.150)
MIN FULL
THD
5,36
Ø (.211)
Steel
Zinc
1,70
(.067)
6,48 - 6,30
(.255 - .248)
7,82 ± 0,13
(.308 ± .005)
NOTE: Not suitable for rear panel mounting.
Part
Number
980-2000-858
980-2000-859
Screw Locks for Connectors with Integral
Threaded Inserts
3,02
Ø (.119)
6,35
Ø (.119)
NOM
ɀ Order 2 per connector
ɀ Tool required for installation. See page 211.
Material:
Finish:
A
±0,38 (.015)
7,92 (.312)
12,70 (.500)
15,88 (.625)
19,05 (.750)
Thread
Code
#4-40
M3
Jackpost
3,50
(.138)
MIN
THD A
5,75
(.226)
Part
Number
D121073-39
D121073-40
D121073-41
D121073-42
5,50
(.217)
Nominal Panel Thickness
1,09 – 0,91 (.043 – .036)
1,09 – 0,91 (.043 – .036)
5,00 (.197) HEX
(ACROSS FLATS)
THD B
4,50 (.177)
MIN
Thread Code
THD A
#4-40 UNC-2B
M3
#4-40 UNC-2B
M3
THD B
#4-40 UNC-2A
#4-40 UNC-2A
M3
M3
ɀ Kit consists of 1 jackpost, 1 lock washer
ɀ Order 2 per connector
Material:
Finish:
Brass
Nickel
Dimensions are shown in mm (inch)
Dimensions subject to change
209
D Subminiature Accessories
Locking Hardware
Slide Lock Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon backshells.
#4-40
NUT, HEX
Product Features
ɀ Ensures positive mating
ɀ Provides locking and latching for high
vibration applications
WASHER,
LOCK
PLATE, SLIDING LOCK
MOUNTING
SCREW #4-40
WASHER
#4-40
POST
WASHER, LOCK
NUT, HEX
Sliding Lock Retainer Assembly
,
,
,
2,36 (.093)
TRAVEL REF
A
C
ɀ Ideal for Ethernet Applications
ɀ Kit consists of 1 sliding lock plate, 2 mounting
screws, 2 lock washers, 2 hex nuts
ɀ Order 1 kit per connector
Finish/
Description
Material
Treatment
Sliding Lock
Plate
Stainless Steel Passivated
Screw,
Yellow
Mounting
Steel
Chromate Over
Washer, Lock
Cadmium or
Zinc
Nut, Hex
210
B
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part
Number
DE51224-1
DA51220-1*
DB51221-1
DC51222-1
DD51223-1
A
±0,38 (.015)
35,05 (1.380)
43,70 (1.720)
57,40 (2.260)
73,86 (2.908)
71,47 (2.814)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
±0,13 (.005)
25,00 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
* Meets IEEE 802.3 Ethernet Specification
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Locking Hardware
Slide Lock Post Assemblies
WASHER
WASHER, LOCK
POST
ɀ Kit consists of 1 post, 2 washers, 1 lock
washer, 1 hex nut
ɀ Order 2 kits per connector
Part Number:
4,60 (.180) HEX
(ACROSS FLATS)
D53018
2,59 ± 0,13
(.102 ± .005)
Materials and Finishes
Material:
Finish:
#4-40
NUT, HEX
10,57 ± 0,25
(.416 ± .010)
Steel
Yellow Chromate over
Cadmium or Zinc
NOTE: When rear-mounting connector to a 1/16⍯ panel, delete the 2 washers.
Slide Lock Post for High Volume Applications
Ø 4,78 ± 0,08
(.118 ± .003)
Ø 3,63 ± 0,08
(.143 ± .003)
Ø 3,02(.119)
MAX
Ø 2,44 ± 0,08
(.096 ± .003)
ɀ Order 2 per connector
ɀ Tool required for installation. See this page.
Part Number:
Panel Thickness:
980-2000-860
1,09-0,91 (.043-.036)
Ø 5,54(.218)
1,85(.073)
MAX
1,52 (.060)
MAX
4,37 ± 0,13
(.172 ± .005)
Materials and Finishes
Material:
Treatment:
Stainless Steel
Passivated
NOTE: Not suitable for rear panel mounting
Tool for High Volume Applications
Part Number:
995-2000-092
Dimensions are shown in mm (inch)
Dimensions subject to change
211
D Subminiature Accessories
Locking Hardware
Spring Latch Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon Connectors.
Unlocked
Locked
Product Features
ɀ Low Cost
ɀ Minimizes field connection time
ɀ Positive lock between connectors
ɀ Packaged 2 kits per bag
Materials and Finishes
Material:
Treatment:
Stainless Steel
Passivated
Spring Latch Plate Assembly
#4-40
SCREW
#4-40 THD x 7,92 (.312)
SCREW
2,41 - 1,52
(.095 - .060)
PLATE, LATCH
PLATE,
LATCH
CONNECTOR,
EITHER PIN
OR SOCKET
WASHER, LOCK
#4-40
NUT, HEX
Shell
Size
DE, DA, DB, DC
DD
Part
Number
D110278
D110280
Layout
9, 15, 25, 37
50
#4-40 NUT, HEX
A
±0,38 (.015)
12,42 (.489)
15,47 (.609)
B
±0,38 (.015)
14,35 (.565)
17,09 (.673)
ɀ Kit consists of 1 plate, 1 screw, 1 lock washer,
1 hex nut
ɀ Order 2 kits per connector
Spring Latch Assembly
LATCH, SPRING
15,57 ± 0,64
(.613 ± .025)
#4-40
SCREW
LATCH, SPRING
#4-40 THD x 7,92 (.312)
SCREW
B
A
C
SPRING LATCH
MOUNTING BRACKET
*2,41 - 1,52
(.095 - .060)
SPRING LATCH
MOUNTING PLATE
CONNECTOR,
EITHER PIN
OR SOCKET
#4-40 NUT, HEX
* Dimension does not apply to rear panel mounting.
WASHER, LOCK
#4-40
NUT, HEX
Shell
Size
DE, DA, DB, DC
DD
Layout
9, 15, 25, 37
50
Part
Number
D110277
D110279
A
±0,38 (.015)
12,42 (.489)
15,49 (.609)
B
±0,38 (.015)
14,35 (.565)
17,09 (.673)
C
±0,51 (.020)
18,59 (.732)
18,59 (.732)
ɀ Kit consists of 1 spring, 1 screw, 1 bracket,
1 lock washer, 1 hex nut
ɀ Order 2 kits per connector
ɀ Front panel mounting
212
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Locking Hardware
Jackscrew/Jackpost Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon Connectors.
Jackpost Assembly
Jackscrew Assembly
HEAD,
JACKSCREW
#2-56 UNC THD
#4-40 UNC THD
#4-40 UNC-2B THD
RETAINING
COMPOUND
#4-40 UNC-2A THD
WASHER,
#4 LOCK
Ø 3,05 (.120)
#4 HEX NUT
STUD, JACKSCREW
FEMALE POST
Ø 3,05 (.120)
Jackscrew Assembly
Ø 5,59 (.220)
MAX
0,89 ± 0,13
(.035 ± .005)
CONNECTOR
ASSEMBLY
ɀ Kit consists of 2 studs, 2 heads, 1 tube
retaining compound
ɀ Order one kit per connector
Part Number:
9,40 (.370)
MAX
16,26 (.640)
MAX
D110550
Materials and Finishes
Material:
Stainless Steel
0,64 ± 0,13
(.025 ± .005)
#4-40 UNC
THREAD
Ø 5,59 (.220)
MAX
1,73 (.068)
MAX
4,57 (.180)
MAX
Jackpost Assembly
4,75 (.187) HEX
(ACROSS FLATS)
CONNECTOR
ASSEMBLY
ɀ Kit consists of 2 posts, 2 hex nuts, 2 lock
washers
ɀ Order one kit per connector
Part Number:
D110551
14,10 ± 0,13
(.555 ± .005)
5,59 (.220) MIN
PERFECT THD
#4-40 UNC THREAD
5,84 ± 0,13
(.230 ± .005)
1,14 ± 0,13
(.045 ± .005)
PANEL 3,18 (.125)
MAX
Materials and Finishes
Material:
Treatment:
#4-40 UNC THREAD
Stainless Steel
Passivated
NOTE: Jackpost is not compatible with rear-panel mount connectors.
Dimensions are shown in mm (inch)
Dimensions subject to change
213
D Subminiature Accessories
Guide Pin Plate
Guide Pin Plate
Female
9,60 (.378)
MAX
MOUNTING
PANEL
ɀ Useful in blind mate applications.
ɀ Kit consists of 1 plate, 2 screws
ɀ Guide pin inserts for Size 8 cavities for
Combo D connectors also available. See
page 95.
1,57
(.062)
6,35 (.250) MAX
SOLDER POT
EXTENSION
Plate and Hardware Material: Steel
Plate and Hardware Finish:
Yellow Chromate
over Zinc or
Cadmium
Shell
Size Layout
DE
9
DA
15
DB
25
DC
37
DD
50
Part
Number
DE111920
DA22214
DB22254
DC22071
DD21961
A
±0,41 (.016)
49,61 (1.953)
57,96 (2.282)
71,63 (2.820)
88,11 (3.469)
85,72 (3.375)
B
±0,13 (.005)
40,08 (1.578)
48,41 (1.906)
62,13 (2.446)
78,59 (3.094)
76,20 (3.000)
C
±0,13 (.005)
25,00 (.986)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
18,65 (.734)
22,81 (.898)
29,67 (1.168)
37,90 (1.492)
36,50 (1.437)
E
±0,13 (.005)
15,27 (.601)
19,43 (.765)
26,29 (1.035)
34,52 (1.359)
33,32 (1.312)
F
±0,13 (.005)
9,52 (.375)
9,52 (.375)
9,52 (.375)
9,52 (.375)
11,10 (.437)
G
±0,41 (.016)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
28,58 (1.125)
H
±0,41 (.016)
30,58 (1.204)
38,91 (1.532)
51,21 (2.016)
67,49 (2.657)
65,10 (2.563)
J
±0,41 (.016)
12,29 (.484)
12,29 (.484)
11,91 (.469)
11,91 (.469)
14,30 (.563)
K
±0,41 (.016)
6,15 (.242)
6,15 (.242)
5,94 (.234)
5,94 (.234)
7,16 (.282)
Recommended Panel Cutout
2X Ø 4,22 ± 0,05
(.166 .002)
B
2X R K
E
2X Ø 3,66 0,13
(.144 .005)
F
F
J
D
H
214
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Guide Pin Plate
Guide Pin Plate
Male
A
4,78 ± 0,30
(.188 ± .012)
6,35 (.250) MAX
SOLDER POT
EXTENSION
ɀ Useful in blind mate applications.
ɀ Kit consists of 1 plate, 2 sems screws,
2 rivets, 2 guide pins, 2 washers
ɀ Guide pin inserts for Size 8 cavities for
Combo D connectors also available. See
page 95.
Plate and
Hardware Material:
Plate and
Hardware Finish:
Guide Pin Material:
Shell
Size Layout
DE
9
DA
16
DB
25
DC
37
DD
50
Part
Number
DE111919
DA22213
DB22255
DC22070
DD21962
Ø 4,01 (.158)
MAX
22,22 ± 0,76
(.875 ± .030)
B
±0,13 (.005)
40,08 (1.578)
48,41 (1.906)
62,13 (2.446)
78,42 (3.094)
76,20 (3.000)
C
1,57 (.062)
MAX
C
±0.25 (.010)
33,91 (1.335)
42,24 (1.663)
55,96 (2.203)
72,42 (2.851)
69,82 (2.749)
D
±0,13 (.005)
18,65 (.734)
22,81 (.898)
29,67 (1.168)
37,90 (1.492)
36,50 (1.437)
2X Ø 3,66 ± 0,13
(.144 ± .005)
D
ITT CANNON
Ø 4,06 (.160)
REF MAX
1,57 ± 0,13
(.062 ± .005)
8,71 ± 0,38
(.343 ± .015)
F
E
G
2X MOUNTING HOLE
#4-40 UNC-2B THD
4,06 ± 0,25
(.160 ± .010)
Steel
Yellow Chromate over
Zinc or Cadmium
Stainless Steel
A
±0,38 (.015)
49,61 (1.953)
57,94 (2.281)
71,63 (2.820)
88,09 (3.468)
85,72 (3.375)
B
E
±0,38 (.015)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
28,58 (1.125)
F
±0,25 (.010)
19,05 (.750)
19,05 (.750)
19,05 (.750)
19,05 (.750)
22,20 (.874)
G
±0.13 (.005)
25,00 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
H
±0.25 (.010)
12,29 (.484)
12,29 (.484)
12,29 (.484)
12,29 (.484)
15,06 (.593)
J
±0.38 (.015)
30,58 (1.204)
38,89 (1.531)
51,99 (2.047)
68,25 (2.687)
66,93 (2.635)
K
±0,13 (.005)
6,15 (.242)
6,15 (.242)
6,15 (.242)
6,15 (.242)
7,52 (.296)
Recommended Panel Cutout
B
C
2X R K
D
F
2X Ø 3,66 ± 0,13
(.144 ± .005)
H
J
2X Ø 5,54 ± 0,13
(.218 ± .005)
Dimensions are shown in mm (inch)
Dimensions subject to change
215
D Subminiature Accessories
Connector Saver
Connector Saver
Connector Saver
Engaging Face, Pin Side
A
B
5,97 ± 0,25
(.235 ± .010)
C
21,95 ± 0,51
(.864 ± .020)
6,17 ± 0,25
(.243 ± .010)
INSULATOR ASSY
SOCKET
CONTACT
2X 10°
Connector Savers are used to minimize wear on
cable or panel connectors.
SHELL,
SOCKET FRONT
SPACER
SHELL,
PIN FRONT
Note: Hardware removed for clarity.
Shell
Size
DE
DA
DB
Layout
9
15
25
Part
Numbers
DEBU111515
DABU111512
DBBU111511
A
±0,40 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
B
±0,25 (.010)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
C
±0,25 (.010)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
Note: DC-37 and DD-50 not available.
Specifications
Temperature: −55° C to 105° C
Current Rating: 7 A
Dielectric Withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description
Shells
Insulator
Contacts
Spacer
Locking Hardware
216
Material
Steel
Black Thermoplastic, UL 94V-0
Copper Alloy
Zinc Alloy
Steel
Finish
Tin/Lead
—
Gold Over Nickel
—
Clear Chromate Over Zinc
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Accessories
Gender Changer
Gender Changer
Male/Male
Pin
14,50 ± 0,64
(.571 ± .025)
A
5,84 ± 0,15
8,36 ± 0,13 (.230 ± .006)
(.329 ± .005)
B
2X Ø 3,43
(.135)
C
12,55 ± 0,38
(.494 ± .015)
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀ Low cost way to correct design errors
ɀ Optional hardware allows design flexibility
PIN 1
FRONT
SIDE
5,84 ± 0,15
(.230 ± .006)
CONTACT
PIN
FRONT SHELL
PIN 1
REAR
SIDE
FRONT SHELL
2X 10°
RIVET
INSULATOR–PC BOARD
Note: Grounding dimples available on male/male only.
Shell
Size
DE
DA
DB
DC
Layout
9
15
25
37
Part Number
Without Hardware
DE111805-1
DA111806-1
DB111807-1
DC111808-1
Part Number
With Hardware
DE111805-5
DA111806-5
DB111807-5
DC111808-5
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
C
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
Note: DD-50 not available in male/male.
Female/Female
Socket
A
13,11 ± 0,51
(.516 ± .020)
6,17 ± 0,13
(.243 ± .005)
FRONT
SHELL
B
C
6,17 ± 0,13
(.243 ± .005)
INSULATOR
12,55 ± 0,38
(.494 ± .015)
Shell
Size
DE
DA
DB
Layout
9
15
25
SOCKET
CONTACT
INSULATOR
2X Ø 3,05
(.120)
2X 10°
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀ Low cost way to correct design errors
ɀ Optional hardware allows design flexibility
7,90 ± 0,13
(.311 ± .005)
Part Number
Without Hardware
DE111813
DA111810
DB111811
0,76 ± 0,26
(.030 ± .010)
Part Number
With Hardware
DE111813-3
DA111810-3
DB111811-2
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
B
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
FRONT
SHELL
C
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
Note: DC-37 and DD-50 not available for female/female.
Specifications
Temperature: −55° C to 105° C
Current Rating: 3 A
Dielectric Withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description
Shells
Insulator
Contacts
Rivets (M/M)
Locking Hardware
M/M
F/F
Material
Steel
Glass Epoxy
Black Thermoplastic, UL 94V-0
Copper Alloy
Copper Alloy
Steel
Finish
Tin/Lead
—
—
Gold Over Nickel
Tin/Lead
Clear Chromate Over
Cadmium or Zinc and Mylar
Dimensions are shown in mm (inch)
Dimensions subject to change
217
D Subminiature Accessories
Miscellaneous
Dust Cap
RAISED GATE MARK
6,35 (.250)
A
B
ITT CANNON
XX-XX-XX
Dust caps provide protection from moisture and
dust for unused I/O ports.
Product Features
ɀ Conductive Dust Caps provide a surface
resistivity of at least 1 x 105 ohms/sq
ɀ Dust Caps meet the static decay test
requirements of MIL-B-81705C, Type II.
ɀ Dust Caps have an integral flange for easy
application and removal.
Materials and Finishes
Material:
Black Polyethylene
D
1,02 WALL
(.040)
C
NOTE: C dim. applies at point of maximum integral interface length.
Part Number
DE-59-20
DA-59-20
DB-59-20
DC-59-20
DD-59-20
DE-60-20
DA-60-20
DB-60-20
DC-60-20
DD-60-20
I.D.
Socket
Socket
Socket
Socket
Socket
Pin
Pin
Pin
Pin
Pin
A
20,32 (.800)
28,45 (1.120)
42,42 (1.670)
58,93 (2.320)
56,90 (2.240)
21,84 (.860)
30,48 (1.200)
44,20 (1.740)
60,71 (2.390)
58,17 (2.290)
B
11,43 (.450)
11,68 (.460)
11,68 (.460)
11,68 (.460)
14,48 (.570)
12,95 (.510)
12,95 (.510)
13,46 (.530)
13,46 (.530)
16,00 (.630)
C
16,36 (.644)
24,59 (.968)
38,25 (1.506)
54,81 (2.158)
53,11 (2.091)
17,78 (.700)
26,52 (1.044)
39,60 (1.559)
56,90 (2.240)
54,28 (2.137)
D
7,59 (.299)
7,62 (.300)
7,49 (.295)
7,37 (.290)
10,41 (.410)
8,92 (.351)
9,02 (.355)
9,09 (.358)
9,37 (.369)
12,04 (.474)
Interfacial Seal
2X 10°
Interfacial seals provide moisture resistance at the
mating interface.
Product Features
ɀ Other Interfacial Seals in the Combo D
layouts are available upon request.
Materials and Finishes
Material:
Silastic Sheet
Shell Size
DE
DA
DB
DC
DD
DC
Layout
9
15
25
37
50
21WA4
Part Number
DE53750
DA53750-1
DB53750-2
DC53750-3
DD53750-4
075-0354-003
A
16,66 (.656)
24,99 (.984)
38,88 (1.531)
55,14 (2.171)
52,78 (2.078)
55,14 (2.171)
B
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
11,10 (.437)
8,41 (.331)
Potting Shell
4,70 (.185)
15,20
(.600)
2X Ø 3,25 (.128)
Potting shells are molded with a thin flange
0,76 (.030) to permit the use of D Subminiature
locking devices.
Potting shells hold epoxy in place during curing.
Materials and Finishes
Material:
Color:
218
Nylon
Natural (white)
Shell
Size
DE
DA
DB
DC
DD
0,76 (.030)
Layout
9
15
25
37
50
Part
Number
DE50904-1
DA50905-1
DB50906-1
DC50907-1
DD50908-1
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Selection Index
Page
Reader’s Resource
Dimensional Reference Data
Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Panel Cutouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Contact Cavity Arrangements
Combo D — Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Combo D — Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Standard — Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Pushfit/Boardlock — Standard and European . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Alternate Technical Configurations
50 Ohm Coaxial Contact — Straight and 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Bracket — Standard and European . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Hardware Views
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
European. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Printed Circuit Board (PCB) Hole Patterns
Combination Layouts
Coaxial 90° — Standard
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Coaxial 90° — European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Coaxial Straight — Standard/European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
High Power 90° — Standard
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
High Power 90° — European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
High Power/High Voltage Straight — Standard/European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Straight PC Tails (Size 20 Signal Contacts only) — Standard/European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Standard Layouts
90° Standard — Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
90° European — Plug and Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Straight PC Tails — Plug and Receptacle Standard/European . . . . . . . . . . . . . . . . . . . 274
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Obsolete Products/Available Products Not Previously Listed . . . . . . . . . . . . . . . . . . . . . 282
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Product Safety and Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Lease Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Reader’s
90° PC Tails (Size 20 Signal Contacts only) — European
Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
219
D Subminiature
Reader’s Resource
Reader’s
Resource
Panel Mounting
220
Figure 1A
Figure 1B
Figure 2
Figure 3
Figure
Number
1A, 1B
1A, 1B
2
2
2
2
3
3
3
3
Size
A, E
B, C, D
A, E
B, C, D
A, E
B, C, D
A, E
B, C, D
A, E
B, C, D
Combination of Mated Connectors
Pin (See Note Below) Socket
Standard
Standard
Standard
Standard
Standard
Float Mount
Standard
Float Mount
Float Mount
Standard
Float Mount
Standard
Standard
Reverse Float Mount
Standard
Reverse Float Mount
Reverse Float Mount
Standard
Reverse Float Mount
Standard
A
+0,76 (.030)
6,35 (.250)
6,04 (.238)
5,53 (.218)
5,23 (.206)
5,53 (.218)
5,23 (.206)
—
—
—
—
B
+0,76 (.030)
8,63 (.340)
8,71 (.343)
—
—
—
—
9,09 (.358)
9,16 (.361)
9,09 (.358)
9,01 (.355)
C
+0,76 (.030)
7,49 (.295)
7,56 (.298)
6,68 (.263)
6,75 (.266)
6,68 (.263)
6,37 (.251)
7,95 (.313)
7,64 (.301)
7,95 (.313)
7,87 (.310)
F
±0,25 (.010)
—
—
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,30 (.130)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,30 (.130)
H
+0,76 (.030)
7,49 (.295)
7,18 (.283)
—
—
—
—
—
—
—
—
Notes:
1. A, B, C and H are dimensions between panels and represent
the recommended limit to be used in the design of the
connector mounting method.
2. It is recommended that only one assembly, either pin or
socket, be float mounted.
3. Standard pin assemblies contained 0,38 (.015) thick front
shells on E and A sizes; 0,61 (.024) thick front shells on B,
C, and D sizes.
4. Standard connectors accommodate a #4 screw. Float
mount connectors accommodate a #2 screw.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Reader’s Resource
Panel Cutouts
Standard Cutout
Rear Mounting Cutout (Optional)
Front Panel Mounting
Rear Panel Mounting
Standard Shell
Dual Float Mount Shell
Standard Shell
Dual Float Mount Shell
Standard Shell
Shell
Size
DE
DA
DB
DC
B
±0,13 (.005)
11,09 (.437)
10,23 (.403)
15,26 (.601)
14,40 (.567)
22,14 (.872)
21,25 (.837)
30,37 (1.196)
29,54 (1.163)
29,18 (1.149)
28,16 (1.109)
C
±0,13 (.005)
24,99 (.984)
24,99 (.984)
33,32 (1.312)
33,32 (1.312)
47,04 (1.852)
47,04 (1.852)
63,50 (2.500)
63,50 (2.500)
61,11 (2.406)
61,11 (2.406)
D
±0,13 (.005)
12,49 (.492)
12,49 (.492)
16,66 (.656)
16,66 (.656)
23,52 (.926)
23,52 (.926)
31,75 (1.250)
31,75 (1.250)
30,55 (1.203)
30,55 (1.203)
E
±0,13 (.005)
13,03 (.513)
11,40 (.449)
13,03 (.513)
11,40 (.449)
13,03 (.513)
11,40 (.449)
13,03 (.513)
11,40 (.449)
15,82 (.623)
14,09 (.555)
F
±0,13 (.005)
6,52 (.257)
5,71 (.225)
6,52 (.257)
5,71 (.225)
6,52 (.257)
5,71 (.225)
6,52 (.257)
5,71 (.225)
7,92 (.312)
7,06 (.278)
G
±0,05 (.002)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
3,04 (.120)
H
±0,05 (.002)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
1,52 (.060)
J
±0,05 (.002)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
A
±0,13 (.005)
23,01 (.906)
21,28 (.838)
31,34 (1.234)
29,61 (1.166)
45,08 (1.775)
43,33 (1.706)
61,54 (2.423)
59,79 (2.354)
59,15 (2.329)
57,15 (2.250)
B
±0,13 (.005)
11,50 (.453)
10,64 (.419)
15,67 (.617)
14,80 (.583)
22,55 (.888)
21,66 (.853)
30,78 (1.212)
29,89 (1.177)
29,59 (1.165)
28,57 (1.125)
C
±0,13 (.005)
24,99 (.984)
24,99 (.984)
33,32 (1.312)
33,32 (1.312)
47,04 (1.852)
47,04 (1.852)
63,50 (2.500)
63,50 (2.500)
61,11 (2.406)
61,11 (2.406)
D
±0,13 (.005)
12,49 (.492)
12,49 (.492)
16,66 (.656)
16,66 (.656)
23,52 (.926)
23,52 (.926)
31,75 (1.250)
31,75 (1.250)
30,55 (1.203)
30,55 (1.203)
E
±0,13 (.005)
13,84 (.545)
12,21 (.481)
13,84 (.545)
12,21 (.481)
13,84 (.545)
12,21 (.481)
13,84 (.545)
12,21 (.481)
16,63 (.655)
14,90 (.587)
F
±0,13 (.005)
6,93 (.273)
6,12 (.241)
6,93 (.273)
6,12 (.241)
6,93 (.273)
6,12 (.241)
6,93 (.273)
6,12 (.241)
8,33 (.328)
7,46 (.294)
G
±0,05 (.002)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
2,23 (.088)
H
±0,05 (.002)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
1,11 (.044)
J
±0,05 (.002)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
2,10 (.083)
3,35 (.132)
Dual Float Mount Shell
Shell
Size
DE
DA
DB
DC
DD
Mounting
Method
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
A
±0,13 (.005)
22,19 (.874)
20,47 (.806)
30,53 (1.202)
28,80 (1.134)
44,27 (1.743)
42,51 (1.674)
60,73 (2.391)
59,08 (2.326)
58,34 (2.297)
56,33 (2.218)
Reader’s
DD
Mounting
Method
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
221
D Subminiature
Reader’s Resource
Plug Contact Cavity Arrangements — Combo D
Face View Pin Insert
A1
1
2
3
A1
A2
A3
A1
A1
A3
3
4
Shell Size
Contact Arrangment
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1 #8
1
A
3W3
0 #20
3 #8
2
3
4
A
3WK3
0
3
A2
A1
5
A3
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
5W5
0 #20
5 #8
A1
2
1
8
10
9
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
3
5
12
6
13
A2
7
14
1
15
2
11 12
3
4
13
14
B
17W2
15 #20
2 #8
A1
A2
A4
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2
10
3
A5
6
15
16
7
17
8
18
A6
A7
A8
A2
A1
9
Resource
2
11 12
6
14
13
7
8
16
15
A4
A3
Reader’s
5
4
6
8
7
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A4
A5
A3
9
A4
1
A2
A1
2
12
17
3
2
1
13
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
3
14
26
5
4
15
27
16
28
6
29
7
18
17
30
3
4
9
2
8
A1
1
7
6
A6
2
1
8
19 20
10
31
32
9
A7
A6
13
11 12
2
1
7
3
8
14
13
6
16
15
A2
A1
A3
14
15
16
17
16
19 20
18
17
1
21 22
7
8
18
17
10
A4
A3
6
A5
11 12
9
10
19 20
11
A1
A3
14
22
21
3
10
5
4
11 12
26
25
24
3
2
1
15
5
4
16
17
6
18
7
19
8
20
9
10
21 22
11
23
24
12
13
A2
25
C
27W2
25 #20
2 #8
2
23
5
4
9
6
13
27
7
28
A4
8
15
14
29
30
31 32
D
36W4
32 #20
4 #8
10
21
33
A2
A1
4
7
C
25W3
22 #20
3 #8
A5
9
3
6
C
17W5
12 #20
5 #8
5
4
D
24W7
17 #20
7 #8
25
222
3
6
10
10
9
1
5
9
19 20
A3
C
21WA4
17 #20
4 #8
A2
4
A
11W1
10 #20
1 #8
C
13W6
7 #20
6 #8
5
4
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A1
A1
3
8
B
13W3
10 #20
3 #8
C
8W8
0 #20
8 #8
1
7
B
21W1
20 #20
1 #8
A3
A2
5
5
A1
5
2
1
5
10
5
A1
A2
A3
B
9W4
5 #20
4 #8
4
11
4
4
A
7W2
5 #20
2 #8
A4
2
1
3
A2
2
1
11
22
34
35
1
A2
A1
12
23
36
2
16
24
37
38
39
40
41
30
3
17
31
D
43W2
41 #20
2 #8
5
4
18
32
19 20
33
34
6
7
21
35
8
22
36
9
23
37
10
24
38
25
39
11
26
40
12
27
41
13
28
42
14
15
A1
29
43
44
45
46
D
47W1
46 #20
1 #8
Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Reader’s Resource
Receptacle Contact Cavity Arrangements — Combo D
Face View Socket Insert
A1
2
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A3
1
A2
A1
A3
A2
2
A2
5
E
5W1
4 #20
1 #8
A
3W3
0 #20
3 #8
5
4
3
2
A
3WK3
0
3
1
A4
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A3
1
2
5
4
6
7
15
14
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5
4
13
12
2
3
A1
1
9
10
8
20
9
8
19
A7
17
A6
2
3
4
13
14
15
A5
8
17
A4
6
7
16
15
A3
A2
A1
4
3
2
6
A5
14
13
12
13
2
3
12
A4
11
Shell Size
Contact Arrangement
No. of Size 20 Contacts
No. of Size 8 Contacts
A6
1
A4
A5
12
24
41
40
39
38
37
23
36
11
10
11
A2
1
11 10
A3
A1
22
10
8
35 34
9
21
7
5
A3
A2
33
32
A2
A1
A5
A4
A2
A1
21
8
A4
6
5
4
3
2
1
32 31
6
A3
9
20
8
19
7
18
6
17
7
6
14
28
29
30
5
13
4
4
15
3
3
14
2
13
27
25
26
3
9
2
8
A2
1
A1
7
1
A2
A1
12
A2
13
25
12
24
11 10
23
22
9
8
21
20
7
19
6
18
5
17
4
16
3
15
2
1
A1
14
C
27W2
25 #20
2 #8
1
2
11 10
12
4
10
C
17W5
12 #20
5 #8
5
16
5
11
A2
A3
A1
9
24
23
22 21
20
19
18
16
17
D
36W4
32 #20
4 #8
8
20
A3
C
25W3
22 #20
3 #8
A3
9
10
22
4
10
7
19
31
6
18
30
5
17
29
4
16
28
3
15
27
2
14
26
1
15
A1
25
14
29
13
46
45
44
13
28
43
D
43W2
41 #20
2 #8
42
12
27
41
11
26
40
9
10
25
39
24
38
8
23
37
7
22
36
6
21
35
5
20
34
4
19
33
3
18
32
2
17
31
Resource
A1
9
12
D
24W7
17 #20
7 #8
A2
1
7
Reader’s
15
3
5
15
17 16
8
2
8
1
C
21WA4
17 #20
4 #8
A6
2
7
3
A
11W1
10 #20
1 #8
C
13W6
7 #20
6 #8
4
5
14
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A7
1
A1
4
9
11
12
C
8W8
0 #20
8 #8
9
5
10
B
21W1
20 #20
1 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavitites
No. of Size 8 Cavities
A3
6
3
B
13W3
10 #20
3 #8
5
16
7
A4
A1
A1
6
A1
6
7
18
B
17W2
15 #20
2 #8
A8
A2
B
9W4
5 #20
4 #8
11 10
A1
1
4
A
7W2
5 #20
2 #8
3
B
5W5
0 #20
5 #8
A2
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A1
3
4
1
16
30
D
47W1
46 #20
1 #8
Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts.
Dimensions are shown in mm (inch)
Dimensions subject to change
223
D Subminiature
Reader’s Resource
Plug Contact Cavity Arrangements
Face View Pin Insert
2
1
3
2
1
5
4
9
6
Shell Size
Contact Arrangement
Contact Size
4
11
5
12
6
13
8
7
14
E
9
#20
2
1
15
3
15
14
9
8
7
3
10
20
3
21
5
6
18
17
5
4
22
23
6
24
8
7
26
25
9
27
Shell Size
Contact Arrangement
Contact Size
12
10 11
29
28
30
13
31
15
14
32
33
16
34
18
17
35
36
11 12
10
9
8
7
19 20
A
15
#20
22
21
23
24
13
25
B
25
#20
2
1
2
1
4
16
18
19
34
37
4
3
20
19
35
36
5
21
37
6
38
7
39
8
24
23
22
9
25
40 41
C
37
#20
10
26
42
12
11
27
28
44
43
14
13
30
29
45
46
15
47
16
48
17
33
32
31
49
50
D
50
#20
Receptacle Contact Cavity Arrangements
Face View Socket Insert
5
Resource
Reader’s
224
2
3
4
9
8
Shell Size
Contact Arrangement
Contact Size
1
13 12
6
7
E
9
#20
37
Shell Size
Contact Arrangement
Contact Size
18
36
17
35
16
34
15
33
14
32
13
12
31
30
11 10
29
9
28
C
37
#20
8
27
23
22
A
15
#20
6
7
26
25
5
24
4
23
2
3
22
21
1
20
8
21
7
20
6
19
5
18
4
17
3
16
1
2
15
14
B
25
#20
17
19
9
11 10
24
25
33
50
16
32
49
15
31
48
14
30
47
13
29
46
12
28
45
11
27
44
10
9
26
43
8
42
6
7
24
25
23
41 40
5
22
39
4
21
38
3
20
37
2
19
36
1
18
35
34
D
50
#20
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Reader’s Resource
Pushfit/Boardlock — Standard
Straight (Z)
90° (C)
Pushfit/Boardlock — European
Straight (-146)
90° (-146)
Alternate 50 Ohm Coaxial Configuration
90° (X)
0,62 (.024)
2,54 (.100)
Ø 0,79 (.031)
0,62 (.024)
5,59 (.220)
MIN
Ø 0,79 (.031)
2,54 (.100)
Resource
6,96 (2.74)
MIN
Reader’s
Straight (X)
11,94 ± 0,33
(.470 ± .013)
Dimensions are shown in mm (inch)
Dimensions subject to change
225
D Subminiature
Reader’s Resource
Hardware Views (Standard)
Through Hole (Eyelet)
Tab Shells (K)
K
Clinch Nut (E)
4,19 (.165)
MAX
K
Ø 3,05 (.120)
Ø 4,11 (.162)
#4-40 UNC
0,60 (.025)
MAX.
Dimensions — Plug
Shell Size
DE
DA
DB
DC
DD
Dual Float Mount (Y)
K
±0,317 (.0125)
1,206 (.0475)
1,206 (.0475)
—
—
—
K
±0,25 (.010)
—
—
1,52 (.060)
1,52 (.060)
1,52 (.060)
3,30 (.130)
MAX.
0,79 (.031)
OTAL DIAMETRICAL FLOAT
(FOR MISALIGNMENT)
0,79 ± 0,13
(.031 ± .005)
OVERALL FREE FLOAT
0,10 - 0,30
(.004 - .012)
Dimensions — Receptacle
Shell Size
DE
DA
DB
DC
DD
K
±0,318 (.0125)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
1,206 (.0475)
Ø 2,26 ± 0,08
(.089 ± .003)
RIVET
WASHER
Alternate Bracket Configuration
Standard Footprint (P)
European Footprint (P)
Dimensions
Shell
Size
DE, DA, DB, DC
DD
R
±0,25 (.010)
11,61 (.457)
12,78 (.503)
S
±0,25 (.010)
12,78 (.503)
13,95 (.549)
R
S
Reader’s
Resource
Supplied with connectors without boardlocks.
226
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Reader’s Resource
Hardware Views (European)
Through Hole
Clinch Nut (X/E)
M3
#4-40 UNC-3B
Ø 3,05 (.120)
2,80 (.110)
Plastic Bracket with Bushing (1A5N)
Ø 3,05(.120)
Metal Bracket with Bushing (1AFN)
M3
#4-40
Metal Bracket with Captive Nut (1A9N/1A7N)
M3
#4-40
Plastic Bracket with Post (1APN/1A6N)
M3
#4-40
Metal Bracket with Post (1AHN/1A8N)
M3
#4-40
Reader’s
Ø 3,05(.120)
Plastic Bracket with Captive Nut (1ATN/1AVN)
Resource
Dimensions are shown in mm (inch)
Dimensions subject to change
227
PCB Hole Pattern — Standard
Coaxial 90° — Plug
25,00 (.984)
5,49
(.216)
5,49
(.216)
6,86
(.270)
Signal
Contact
2,54 (.100)
Coax
Contact
2,54 (.100)
6,86
(.270)
Coax
Contact
Mounting
Hole
2,74 (.108)
2,54 (.100)
2,84 (.112)
8,64
(.340)
7,19 (.283)
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
2,54 (.100)
8,23 (.324)
REAR FLANGE REF
6,86
(.270)
Coax
Contact
2,54 (.100)
2,84 (.112)
8,64
(.340)
6,86
(.270)
Mounting Hole
2,54 (.100)
9,40
(.370)
33,32 (1.312)
33,32 (1.312)
9,40 (.370)
5,49
(.216)
Signal
Contact
7,19
(.283)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
E
5W1
4 #20
1 #8
8,64
(.340)
9,40 (.370)
REAR FLANGE REF
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47.04 (1.852)
14,48 (.570)
14,48 (.570)
33,32 (1.312)
7,67 (.302)
9,60 (.378)
5,94 (.234)
9,60 (.378)
6,86 (.270) 6,86 (.270)
0,86 (.034)
Coax
Contact
8,23 (.324)
2,54 (.100)
Mounting
Hole
2,54 (.100)
Mounting
Hole
2,54 (.100)
2,54 (.100)
2,84 (.112)
9,40
(.370)
Coax
Contact
5,49
5,49
(.216) (.216)
8,64 Signal
(.340) Contact
7,19 (.283)
8,23 (.324) 8,23 (.324)
REAR FLANGE REF
9,40 (.370)
8,64 (.340)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
14,48 (.570)
8,28 (.326)
7,77 (.306)
5,54(.218)
8,28 (.326)
Coax
Contact
Coax
Contact
Mounting
Hole
2,54 (.100)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,84 (.112)
9,40 (.370)
8,64 (.340)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,68 (.381)
Resource
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.852)
47,04 (1.852)
13,82 (.544)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,54 (.100)
8,64 (.340)
7,19 (.283)
REAR FLANGE REF
6,91 (.272)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Coax
Contact
B
17W2
15 #20
2 #8
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
2,54 (.100)
2,84
(.112)
Signal
Contact
2,84
(.112)
Mounting
Hole
2,54 (.100)
9,40 (.370)
2,80 (.110)
8,28 (.326)
Reader’s
16,56 (.652)
16,56 (.652)
2,54 (.100)
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal
Contact
4,14
(.163)
REAR FLANGE REF
6,91 (.272)
9,40 (.370)
2,80 (.110)
7,19 (.283)
Signal
Contact
4,14
(.163)
228
Mounting
Hole
5,54(.218)
2,54 (.100)
9,40 (.370)
Coax
Contact
8,64 (.340)
7,19 (.283)
Signal
Contact
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
6,91 (.272)
9,68 (.381)
12,42 (.489)
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
Coaxial 90° — Plug
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,56 (.888)
22,86 (.900)
19,33 (.761)
15,82 (.623)
16,51(.650)
15,24 (.600)
8,89 (.350)
16,56 (.652)
9,09 (.358)
10,16 (.400)
2,54 (.100)
Coax
Contact
22,10 (.870)
22,86 (.900)
Mounting
Hole
2,54 (.100)
11,10 (.437)
4,37 (.172)
2,36 (.093)
Coax
Contact
3,81 (.150)
Mounting
Hole
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,84 (.112)
8,64 (.340)
8,64 (.340)
9,40 (.370)
9,40 (.370)
7,19 (.283)
Signal
Contact
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
15,70 (.618)
15,70 (.618)
8,71 (.343)
11,05 (.435)
11,05 (.435)
5,54(.218)
2,54 (.100)
8,28 (.326)
Coax
Contact
8,28 (.326)
11,05 (.435)
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
2,54 (.100)
Mounting
Hole
5,54(.218)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,84 (.112)
8,64 (.340)
Coax
Contact
8,28 (.326)
2,80 (.110)
Signal
Contact
9,40 (.370)
7,19 (.283)
8,64 (.340)
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
6,91 (.272)
REAR FLANGE REF
2,80 (.110)
C
17W5
12 #20
5 #8
7,19 (.283)
9,40 (.370)
8,28 (.326)
6,91 (.272)
9,68 (.381)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal
Contact
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
C
21WA4
17 #20
4 #8
63,50 (2.500)
22,68 (.893)
22,68 (.893)
16,56 (.652)
15,70 (.618)
13,82 (.544)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
2,54 (.100)
Reader’s
11,05 (.435)
Coax
Contact
Mounting
Hole
5,54(.218)
2,54 (.100)
2,84 (.112)
8,64 (.340)
REAR FLANGE REF
Signal
Contact
2,80 (.110)
7,19 (.283)
9,40 (.370)
8,28 (.326)
6,91 (.272)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
Resource
15,19 (.598)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
3 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
229
PCB Hole Pattern — Standard
Coaxial 90° — Plug
61,12 (2.406)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal Contact
5,54(.218)
2,84 (.112)
Mounting Hole
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,84 (.112)
Coax
Contact
4,14 (.163) 6,86 (.270)
11,53 (.454)
6,91 (.272)
9,40 (.370)
13,72 (.540)
10,06 (.396)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
REAR FLANGE REF
20,57 (.810)
15,19 (.598)
20,57 (.810)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Signal Contact
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,84 (.112)
Mounting Hole
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,80 (.110)
8,28 (.326)
Reader’s
Resource
10,06 (.396)
230
9,40 (.370)
Coax
Contact
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
11,53 (.454)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
17,96 (.707)
20,57 (.810)
20,70 (.815)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
43W2
41 #20
2 #20
D
47W1
46 #20
1 #20
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
Coaxial 90° — Receptacle
25,00 (.984)
5,49
(.216)
5,49
(.216)
6,86
(.270)
Signal
Contact
2,54 (.100)
33,32 (1.312)
33,32 (1.312)
6,86
(.270)
Mounting Hole
6,86
(.270)
Coax
Contact
2,54 (.100)
2,54 (.100)
Mounting
Hole
2,54 (.100)
2,54 (.100)
Coax
Contact
8,64
(.340)
REAR FLANGE REF
Mounting
Hole
2,54 (.100)
2,84 (.112)
8,64
(.340)
7,19 (.283)
9,40 (.370)
8,64
(.340)
8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Coax
Contact
2,74 (.108)
2,84 (.112)
9,40
(.370)
6,86
(.270)
REAR FLANGE REF
7,19
(.283)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
E
5W1
4 #20
1 #8
5,49
(.216)
Signal
Contact
9,40 (.370)
REAR FLANGE REF
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
14,48 (.570)
33,32 (1.312)
9,60 (.378)
14,48 (.570)
5,94 (.234)
7,67 (.302)
9,60 (.378)
6,86 (.270) 6,86 (.270)
0,86 (.034)
Coax
Contact
8,23 (.324)
Mounting
Hole
2,54 (.100)
2,54 (.100)
Mounting
Hole
2,54 (.100)
2,54 (.100)
2,84 (.112)
9,40
(.370)
Coax
Contact
5,49
5,49
(.216) (.216)
8,64 Signal
(.340) Contact
9,40 (.370)
7,19 (.283)
8,23 (.324) 8,23 (.324)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
8,28 (.326)
8,28 (.326)
7,77 (.306)
5,54(.218)
Coax
Contact
Mounting
Hole
Coax
Contact
5,54(.218)
2,54 (.100)
Mounting
Hole
2,54 (.100)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,84 (.112)
9,40 (.370)
REAR FLANGE REF
9,40 (.370)
8,64 (.340)
7,19 (.283)
4,14
(.163)
Signal
Contact
2,80 (.110)
Signal
Contact
REAR FLANGE REF
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
REAR FLANGE REF
6,91 (.272)
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.852)
47,04 (1.852)
16,56 (.652)
16,56 (.652)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,54 (.100)
7,19 (.283)
6,91 (.272)
9,68 (.381)
6,91 (.272)
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
2,54 (.100)
2,84
(.112)
Signal
Contact
2,84
(.112)
9,40 (.370)
Coax
Contact
8,64 (.340)
7,19 (.283)
Signal
Contact
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
9,68 (.381)
9,68 (.381)
12,42 (.489)
B
17W2
15 #20
2 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
15,19 (.598)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
12,42 (.489)
REAR FLANGE REF
6,91 (.272)
15,19 (.598)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
2,54 (.100)
9,40 (.370)
2,80 (.110)
8,28 (.326)
REAR FLANGE REF
Coax
Contact
Reader’s
13,82 (.544)
13,82 (.544)
13,82 (.544)
13,82 (.544)
8,64 (.340)
8,64 (.340)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,54 (.100)
7,19 (.283)
4,14
(.163)
231
PCB Hole Pattern — Standard
Coaxial 90° — Receptacle
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,86 (.900)
22,56 (.888)
22,10 (.870)
22,86 (.900)
19,33 (.761)
16,51(.650)
15,24 (.600)
9,09 (.358)
11,10 (.437)
2,54 (.100)
3,81 (.150)
15,82 (.623)
16,56 (.652)
8,89 (.350)
10,16 (.400)
Mounting
Hole
2,36 (.093)
4,37 (.172)
Coax
Contact
Coax
Contact
Mounting
Hole
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,84 (.112)
9,40 (.370)
8,64 (.340)
9,40 (.370)
7,19 (.283)
8,64 (.340)
Signal
Contact
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
15,70 (.618)
8,71 (.343)
11,05 (.435)
Coax
Contact
Mounting
Hole
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
5,54(.218) 5,54(.218)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,84 (.112)
8,64 (.340)
2,80 (.110)
7,19 (.283)
8,64 (.340)
Signal
Contact
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
6,91 (.272)
Signal
Contact
REAR FLANGE REF
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
5,54(.218)
2,84 (.112)
9,40 (.370)
Coax
Contact
8,28 (.326)
2,80 (.110)
6,91 (.272)
9,68 (.381)
C
17W5
12 #20
5 #8
7,19 (.283)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
C
21WA4
17 #20
4 #8
63,50 (2.500)
22,68 (.893)
22,68 (.893)
16,56 (.652)
15,70 (.618)
13,82 (.544)
Resource
11,05 (.435)
Coax
Contact
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
2,54 (.100)
5,54(.218)
2,54 (.100)
2,84 (.112)
9,40 (.370)
2,80 (.110)
7,19 (.283)
8,28 (.326)
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
6,91 (.272)
Signal
Contact
8,64 (.340)
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
15,19 (.598)
Reader’s
17,96 (.707)
232
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
3 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
Coaxial 90° — Receptacle
61,12 (2.406)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
5,54(.218)
Mounting Hole
2,84 (.112)
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,84 (.112)
10,06 (.396)
9,40 (.370)
Coax
Contact
6,86 (.270) 4,14 (.163)
11,53 (.454)
6,91 (.272)
13,72 (.540)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
12,42 (.489)
20,57 (.810)
15,19 (.598)
20,57 (.810)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
61,12 (2.406)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
Signal Contact
5,54(.218) 5,54(.218)
5,54(.218) 5,54(.218)
5,54(.218)
2,84 (.112)
2,84 (.112)
2,84 (.112)
2,84 (.112)
Mounting Hole
2,54 (.100)
2,54 (.100)
2,80 (.110)
8,28 (.326)
11,53 (.454)
11.53 (.454)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
Coax
Contact
6,91 (.272)
9,40 (.370)
10,06 (.396)
9,68 (.381)
12,42 (.489)
15,19 (.598)
REAR FLANGE REF
15,19 (.598)
17,96 (.707)
20,57 (.810)
20,70 (.815)
D
43W2
41 #20
2 #8
Reader’s
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
47W1
46 #20
1 #8
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
Resource
Signal Contact X
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
233
PCB Hole Pattern — European
Coaxial 90° — Plug
33,32 (1.312)
25,00 (.984)
Signal
Contact 5,49
(.216)
6,86
(.270)
5,49
(.216)
2,54
(.100)
2,54
(.100)
Coax
Contact
10,90 (.429)
6,86
(.270)
2,54
(.100)
Mounting
Hole
10,90 (.429)
9,40 (.370)
33,32 (1.312)
6,86 (.270)
Mounting
Hole
2,54
(.100)
Coax
Contact
6,86 (.270)
2,54
(.100)
Coax
Contact
9,40 (.370)
Mounting
Hole
2,54
(.100)
2,74 (.108)
5,49(.216)
Signal
Contact
10,90 (.429)
9,40 (.370)
8,23 (.324)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
A
3W3
0 #20
3 #8
E
5W1
4 #20
1 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
7W2
5 #20
2 #8
47,04 (1.852)
14,48 (.570)
33,32 (1.312)
9,60 (.378)
9,60 (.378)
6,86
(.270)
6,86
(.270)
8,23 (.324)
Signal
Contact
14,48 (.570)
7,67 (.302)
2,54
(.100)
2,54(.100)
Coax
Contact
Mounting
Hole
5,94 (.234)
Mounting
Hole
0,86 (.034)
2,54 (.100)
2,54 (.100)
Coax Contact
10,90 (.429)
5,49
(.216)
9,40 (.370)
5,49
(.216)
9,40 (.370)
10,90 (.429)
8,23 (.324) 8,23 (.324) REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
A
11W1
10 #20
1 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
Coax
Contact
8,28 (.326)
7,77 (.306)
Mounting
Hole
Signal
Contact
5,54(.218)
2,54
(.100)
2,54 (.100)
Coax
Contact
Signal
2,80 (.110)
Contact
4,14 (.163)
10,90 (.429)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
Resource
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218)
10,90 (.429)
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
2,54 (.100)
Signal
Contact
2,54
(.100)
8,28 (.326)
5,54(.218) 5,54(.218)
2,54
(.100)
2,54(.100)
Signal
Contact
Coax
Contact
2,80 (.110)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
Reader’s
REAR FLANGE REF
9,68 (.381)
47,04 (1.852)
234
9,40 (.370)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
2,54
(.100)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
8,28 (.326)
5,54(.218)
5,54(.218)
4,14 (.163)
10,90 (.429)
REAR FLANGE REF
B
5W5
0 #20
5 #8
9,68 (.381)
Coax
Contact
9,40 (.370)
10,90 (.429)
6,91 (.272)
9,68 (.381)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
B
17W2
15 #20
2 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
9,40 (.370)
8,28 (.326)
9,68 (.381)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
Coaxial 90° — Plug
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
22,56 (.888)
22,86 (.900)
22,86 (.900)
15,24 (.600)
16,51(.650)
2,54 (.100)
16,56 (.652)
11,10 (.437)
9,09 (.358)
Mounting
Hole
3,81 (.150)
Mounting
Hole
Coax
Contact
10,16 (.400)
8,89 (.350)
Coax
Contact
15,82 (.623)
2,36(.093)
4,37(.172)
2,54(.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
9,40 (.370)
10,90 (.429)
10,90 (.429)
9,40 (.370)
Signal
Contact
9,40 (.370)
REAR FLANGE REF
17,96 (.707)
REAR FLANGE REF
20.70 (.815)
REAR FLANGE REF
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
11,05 (.435)
Coax
Contact
22,68 (.893)
15,70 (.618)
8,71 (.343)
2,54
(.100)
5,54(.218)
2,80 (.110)
10,90 (.429)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
16,56 (.652)
15,70 (.618)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Coax
Contact
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
10,90 (.429)
9,68 (.381)
2,80 (.110)
Signal
Contact
REAR FLANGE REF
REAR FLANGE REF
12,42 (.489)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
9,40 (.370)
8,28 (.326)
6,91 (.272)
6,91 (.272)
Mounting
Hole
2,54
(.100)
5,54(.218)
9,40 (.370)
8,28 (.326)
Signal
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
2,54 (.100)
2,80 (.110)
10,90 (.429)
8,28 (.326)
11,05 (.435)
15,19 (.598)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
17,96 (.707)
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
C
27W2
25 #20
2 #8
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Reader’s
Mounting
Hole
2,54
(.100)
2,54 (.100)
13,82 (.544)
13,82 (.544)
5,54(.218) 5,54(.218)
5,54(.218)
22,68 (.893)
16,56 (.652)
16,56 (.652)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
C
21WA4
17 #20
4 #8
63,50 (2.500)
11,05 (.435)
6,91 (.272)
9,68 (.381)
9,68 (.381)
C
17W5
12 #20
5 #8
Coax
Contact
9,40 (.370)
8,28 (.326)
Signal
Contact
6,91 (.272)
REAR FLANGE REF
Mounting
Hole
2,54
(.100)
2,54 (.100)
9,40 (.370)
8,28 (.326)
Signal
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
2,80 (.110)
10,90 (.429)
11,05 (.435)
8,28 (.326)
Coax
Contact
Mounting
Hole
5,54(.218)
2,54 (.100)
15,70 (.618)
11,05 (.435)
8,28 (.326)
5,54(.218)
22,68 (.893)
15,70 (.618)
Dimensions are shown in mm (inch)
Dimensions subject to change
235
PCB Hole Pattern — European
Coaxial 90° — Receptacle
25,00 (.984)
Signal
Contact 5,49
(.216)
33,32 (1.312)
6,86
(.270)
5,49
(.216)
2,54
(.100)
2,54
(.100)
6,86
(.270)
2,54
(.100)
Mounting
Hole
33,32 (1.312)
6,86 (.270) 6,86 (.270)
Mounting
Hole
2,54
(.100)
High Power
Contact
Mounting
Hole
2,74 (.108)
2,54 (.100)
Coax
Contact
10,90 (.429)
9,40 (.370)
10,90 (.429)
Coax
Contact
5,49
(.216)
10,90
(.429)
9,40 (.370)
Signal 9,40 (.370)
Contact
8,23 (.324)
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
E
5W1
4 #20
1 #8
REAR FLANGE
REF
REAR FLANGE REF
A
3W3
0 #20
3 #8
REAR FLANGE
REF
A
7W2
5 #20
2 #8
47,04 (1.852)
14,48 (.570)
14,48 (.570)
33,32 (1.312)
9,60 (.378)
6,86
(.270)
6,86
(.270)
8,23 (.324)
Signal
Contact
5,94 (.234)
9,60 (.378)
2,54
(.100)
2,54(.100)
Mounting
Hole
Mounting
Hole
7,67 (.302)
Coax
Contact
0,86 (.034)
2,54 (.100)
2,54 (.100)
Coax Contact
10,90 (.429)
5,49
(.216)
9,40 (.370)
5,49
(.216)
9,40 (.370)
10,90 (.429)
8,23 (.324) 8,23 (.324) REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
A
11W1
10 #20
1 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
14,48 (.570)
8,28 (.326)
7,77 (.306)
8,28 (.326)
Mounting
Hole
Signal
Contact
REAR FLANGE REF
B
5W5
0 #20
5 #8
Mounting
Hole
Coax
Contact
5,54(.218)
2,54
(.100)
7,77 (.306)
5,54(.218)
2,54
(.100)
Coax
Contact
5,54(.218)
2,54 (.100)
2,54 (.100)
Signal
Contact
4,14 (.163)
2,80 (.110)
4,14 (.163)
9,40 (.370)
10,90 (.429)
9,40 (.370)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
13W3
10 #20
3 #8
Resource
47,04 (1.852)
Reader’s
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218)
2,54 (.100)
10,90 (.429)
Signal
Contact
6,91 (.272)
9,68 (.381)
B
17W2
15 #20
2 #8
Mounting
Hole
Coax
Contact
9,40 (.370)
10,90 (.429)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
9,40 (.370)
8,28 (.326)
9,68 (.381)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,54
(.100)
2,54(.100)
6,91 (.272)
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
Coax
Contact
2,80 (.110)
8,28 (.326)
Signal
Contact
2,54
(.100)
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
REAR FLANGE REF
236
REAR FLANGE REF
9,68 (.381)
B
9W4
5 #20
4 #8
13,82 (.544)
10,90 (.429)
6,91 (.272)
6,91 (.272)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
Coaxial 90° — Receptacle
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
22,86 (.900)
22,86 (.900)
16,51(.650)
10,16 (.400)
Mounting
Hole
15,82 (.623)
16,56 (.652)
8,89 (.350)
3,81 (.150)
22,56 (.888)
19,33 (.761)
15,24 (.600)
11,10 (.437)
Mounting
Hole
Coax
Contact
2,54 (.100)
9,09 (.358)
4,37(.172)
Coax
Contact
2,36(.093)
2,54(.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
10,90 (.429)
9,40 (.370)
REAR FLANGE REF
9,40 (.370)
9,40 (.370)
Signal
Contact
REAR FLANGE REF
17,96 (.707)
10,90 (.429)
REAR FLANGE REF
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
8,71 (.343)
11,05 (.435)
5,54(.218)
2,54
(.100)
15,70 (.618)
11,05 (.435)
Coax
Contact
8,28 (.326)
Mounting
Hole
22,68 (.893)
15,70 (.618)
2,54 (.100)
2,80 (.110)
2,80 (.110)
8,28 (.326)
10,90 (.429)
Signal
Contact
10,90 (.429)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
9,40 (.370)
8,28 (.326)
Signal
Contact
6,91 (.272)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
2,54
(.100)
5,54(.218)
2,54 (.100)
REAR FLANGE REF
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
9,40 (.370)
11,05 (.435)
8,28 (.326)
Coax
Contact
REAR FLANGE REF
C
17W5
12 #20
5 #8
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
9,68 (.381)
C
21WA4
17 #20
4 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
22,68 (.893)
16,56 (.652)
16,56 (.652)
16,56 (.652)
15,70 (.618)
11,05 (.435)
11,05 (.435)
11,05 (.435)
Coax
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
2,54
(.100)
Coax
Contact
2,54 (.100)
2,80 (.110)
10,90 (.429)
8,28 (.326)
9,68 (.381)
6,91 (.272)
9,68 (.381)
10,90 (.429)
2,80 (.110)
Signal
Contact
Signal
Contact
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
9,40 (.370)
8,28 (.326)
6,91 (.272)
12,42 (.489)
Mounting
Hole
2,54
(.100)
5,54(.218)
2,54 (.100)
6,91 (.272)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
9,40 (.370)
REAR FLANGE REF
8,28 (.326)
11,05 (.435)
15,19 (.598)
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
Resource
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Reader’s
8,28 (.326)
Mounting
Hole
13,82 (.544)
13,82 (.544)
13,82 (.544)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
237
PCB Hole Pattern — Standard/European
5,49
(.216)
33,32 (1.312)
33,32(1.312)
25,00 (.984)
Signal
Contact
Coaxial Straight — Plug
5,49
(.216)
Mounting
Hole
Coax Contact
2,84
(.112)
2,54 (.100)
6,86
(.270)
6,86
(.270)
6,86
(.270)
2,54
(.100)
Mounting
Hole
2,54
(.100)
8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,74 (.108)
2,54
(.100)
2,54 (.100)
E
5W1
4 #20
1 #8
Mounting
Hole
Coax
Contact
2,54
(.100)
6,86
(.270)
5,49
(.216)
Signal
Contact
A
3W3
0 #20
3 #8
Coax
Contact
2,84
(.112)
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
14,48 (.570)
9,60 (.378)
6,86
(.270)
14,48 (.570)
9,60 (.378)
7,67 (.302)
6,86
(.270)
5,94 (.234)
0,86
(.034)
8,23 (.324)
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Mounting
Hole
2,54 (.100)
5,49
5,49
(.216) (.216)
Signal
Contact
Coax Contact
Mounting Hole
Coax
Contact
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
7,77 (.306)
14,48 (.570)
8,28 (.326)
14,48 (.570)
7,77 (.306)
8,28 (.326)
5,54(.218)
5,54(.218)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Mounting Hole
Mounting Hole
Coax
Contact
6,91 (.272)
2,80 (.110)
Signal
Contact
4,14 (.163)
Signal
Contact
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
9,68 (.381)
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,01(1.852)
Resource
47,04(1.852)
13,82 (.544)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
Coax Contact
5,54(.218)
2,84
(.112)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Mounting Hole
Signal
Contact
2,80 (.110)
8,28 (.326)
9,68 (.381)
Reader’s
16,56 (.652)
16,56 (.652)
6,91 (.272)
238
Coax
Contact
4,14 (.163)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Coax
Contact
Mounting Hole
9,68 (.381)
B
17W2
15 #20
2 #8
8,28 (.326)
6,91 (.272)
6,91 (.272)
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
Coaxial Straight — Plug
63,50(2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
22,86 (.900)
22,86 (.900)
16,51(.650)
15,24 (.600)
8,89 (.350)
Coax
Contact
22,56 (.888)
15,82 (.623)
9,09 (.358)
10,16 (.400)
2,54 (.100)
16,56 (.652)
3,81 (.150)
Coax
Contact
Mounting
Hole
11,10 (.437)
4,37 (.172)
2,36 (.093)
2,84
(.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Mounting
Hole
Signal
Contact
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63.50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
15,70 (.618)
11,05 (.435)
15,70 (.618)
8,71 (.343)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
5,54(.218)
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,80 (.110)
Mounting Hole
Signal
Contact
Coax
Contact
8,28 (.326)
2,80 (.110)
Mounting Hole
6,91 (.272)
Signal
Contact
8,28 (.326)
6,91 (.272)
9,68 (.381)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
17W5
12 #20
5 #8
Coax
Contact
6,91 (.272)
9,68 (.381)
C
21WA4
17 #20
4 #8
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
Reader’s
5,54(.218) 5,54(.218)
5,54(.218)
2,54 (.100)
2,84 (.112)
2,54 (.100)
Coax
Contact
2,80 (.110)
Mounting Hole
Signal
Contact
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
C
27W2
25 #20
2 #8
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Dimensions are shown in mm (inch)
Dimensions subject to change
239
PCB Hole Pattern — Standard/European
Coaxial Straight — Plug
61,12 (2.406)
20,57 (.810)
20,57 (.810)
15,19 (.598)
13,72 (.540)
12,42 (.489)
9,68 (.381)
6,86 (.270)
Coax
Contact
6,91 (.272)
4,14 (.163)
2,84 (.112)
2,54 (.100)
3,96 (.156)
2,84 (.112)
2,54 (.100)
2,84 (.112)
Mounting Hole
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
22,10 (.870)
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
20,70 (.815)
20,57 (.810)
17,96 (.707)
15,19 (.598)
15,19 (.598)
12,42 (.489)
12,42 (.489)
9,68 (.381)
6,91 (.272)
9,68 (.381)
6,91 (.272)
8,28 (.326)
Coax
Contact
2,80 (.110)
2,54 (.100)
2,84 (.112)
3,96 (.156)
2,54 (.100)
2,84 (.112)
Mounting
Hole
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
Reader’s
Resource
22,10 (.870)
240
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
43W2
41 #20
2 #8
11,05 (.435)
13,82 (.544)
13,82 (.544)
D
47W1
46 #20
1 #8
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
33,32(1.312)
25,00 (.984)
5,49
(.216)
Signal
Contact
Coaxial Straight — Receptacle
5,49
(.216)
Mounting
Hole
Coax Contact
2,84
(.112)
2,54 (.100)
6,86
(.270)
33,32 (1.312)
6,86
(.270)
6,86
(.270)
2,54
(.100)
2,54
(.100)
6,86
(.270)
2,74 (.108)
2,54 (.100)
Mounting
Hole
2,54
(.100)
8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1 #8
Mounting
Hole
Coax
Contact
2,54
(.100)
5,49
(.216)
Signal
Contact
A
3W3
0 #20
3 #8
Coax
Contact
2,84
(.112)
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
9,60 (.378)
6,86
(.270)
14,48 (.570)
14,48 (.570)
9,60 (.378)
7,67 (.302)
5,94 (.234)
6,86
(.270)
0,86
(.034)
8,23 (.324)
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Mounting
Hole
2,54 (.100)
5,49
5,49
(.216) (.216)
Signal
Contact
Coax Contact
Mounting Hole
Coax
Contact
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
8,28 (.326)
14,48 (.570)
14,48 (.570)
8,28 (.326)
7,77 (.306)
5,54(.218)
7,77 (.306)
5,54(.218)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Mounting Hole
Coax
Contact
Coax
Contact
4,14 (.163)
Signal
Contact
Signal
Contact
4,14 (.163)
6,91 (.272)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting Hole
2,80 (.110)
9,68 (.381)
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,01(1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
5,54(.218)
8,28 (.326)
5,54(.218) 5,54(.218)
Coax Contact
2,54 (.100)
2,84
(.112)
2,54 (.100)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Mounting Hole
Signal
Contact
2,80 (.110)
8,28 (.326)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
6,91 (.272)
9,68 (.381)
B
17W2
15 #20
2 #8
Mounting Hole
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
6,91 (.272)
Coax
Contact
Reader’s
47,04(1.852)
241
PCB Hole Pattern — Standard/European
Coaxial Straight — Receptacle
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
22,86 (.900)
22,86 (.900)
16,51(.650)
22,56 (.888)
16,56 (.652)
15,24 (.600)
15,82 (.623)
9,09 (.358)
11,10 (.437)
8,89 (.350)
10,16 (.400)
Mounting
Hole
2,54 (.100)
3,81 (.150)
2,54 (.100)
Coax
Contact
2,36 (.093)
4,37 (.172)
Coax
Contact
2,84
(.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Mounting
Hole
Signal
Contact
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63.50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
15,70 (.618)
15,70 (.618)
8,71 (.343)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,84 (.112)
2,80 (.110)
2,80 (.110)
Signal
Contact
Mounting Hole
Mounting Hole
C
25W3
22 #20
3 #8
Coax
Contact
6,91 (.272)
9,68 (.381)
C
21WA4
17 #20
4 #8
Reader’s
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
9,68 (.381)
9,68 (.381)
C
17W5
12 #20
5 #8
Signal
Contact
6,91 (.272)
6,91 (.272)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
5,54(.218)
8,28 (.326)
15,70 (.618)
11,05 (.435)
8,28 (.326)
Coax
Contact
22,68 (.893)
242
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
Coaxial Straight — Receptacle
61,12 (2.406)
20,57 (.810)
20,57 (.810)
15,19 (.598)
12,42 (.489)
9,68 (.381)
13,72 (.540)
6,91 (.272)
6,86 (.270)
4,14 (.163)
Coax
Contact
2,84 (.112)
2,54 (.100)
2,84 (.112)
3,96 (.156)
2,54 (.100)
2,84 (.112)
Mounting Hole
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12(2.406)
61,12 (2.406)
20,70 (.815)
20,57 (.810)
20,70 (.815)
17,96 (.707)
20,57 (.810)
15,19 (.598)
13,72 (.540)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
3,96 (.156)
15,19 (.598)
12,42 (.489)
9,68 (.381)
12,42 (.489)
9,68 (.381)
6,91 (.272)
6,91 (.272)
8,28 (.326)
Coax
Contact
17,96 (.707)
8,28 (.326)
Coax
Contact
2,80 (.110)
2,54 (.100)
9,68 (.381)
6,91 (.272)
2,80 (.110)
2,54 (.100)
2,84 (.112)
2,54 (.100)
3,96 (.156)
2,84 (.112)
2,54 (.100)
2,84 (.112)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
13,82 (.544)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
16,56 (.652)
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
22,10 (.870)
8,28 (.326)
13,82 (.544)
16,56 (.652)
19,33 (.761)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
22,10 (.870)
D
43W2
41 #20
2 #8
Reader’s
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,84 (.112)
Mounting
Hole
5,54(.218)
Mounting Hole
D
47W1
46 #20
1 #8
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
Coaxial (C or X)
Recommended PCB Hole X
1,14 (.045)
Resource
Signal Contact X
0,60 (.024)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
243
PCB Hole Pattern — Standard
High Power 90° — Plug
25,00 (.984)
33,32 (1.312)
5,49
5,49
(.216) (.216)
6,86
(.270)
Signal
Contact
2,84
(.112)
High Power
Contact
6,86
(.270)
8,23
(.324)
REAR FLANGE REF
REAR FLANGE REF
Signal
Contact
8,64
(.340)
11,53 (.454)
E
5W1
4 #20
1 #8
REAR FLANGE REF
6,86
(.270)
11,53 (.454)
REAR FLANGE REF
REAR FLANGE REF
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
9,60 (.378)
Mounting
Hole
20,57
(.810)
5,49
(.216)
8,64
(.340)
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,84 (.112)
High Power
Contact
20,57
(.810)
8,64
(.340)
6,86
(.270)
2,74 (.108)
Mounting
Hole
20,57
(.810)
High Power
Contact
Mounting
Hole
33,32 (1.312)
6,86
(.270)
9,60 (.378)
14,48 (.570)
14,48 (.570)
6,86
(.270)
8,23 (.324)
2,84
(.112)
High Power
Contact
Mounting
Hole
High Power
Contact
Signal
Contact
0,86 (.034)
20,57
(.810)
5,49
(.216)
8,64
(.340)
REAR FLANGE REF
8,23(.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,49
(.216)
7,67 (.302)
Mounting
Hole
5,94(.234)
11,53 (.454)
8,64 (.340)
REAR FLANGE REF
8,23(.324)
A
11W1
10 #20
1 #8
20,57 (.810)
B
5W5
0 #20
5 #8
REAR FLANGE REF
REAR FLANGE REF
47,04 (1.852)
14,48 (.570)
14,48 (.570)
47,04 (1.852)
8,28 (.326)
7,77 (.306)
14,48 (.570)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
5,54(.218)
2,84
(.112)
High Power
Contact
High Power
Contact
Mounting Hole
11,53 (.454)
4,14
(.163)
6,91 (.272)
Mounting
Hole
2,80 (.110)
Signal
Contact
8,64 (.340)
11,53 (.454)
20,57 (.810)
4,14
(.163)
Signal
Contact
8,64 (.340)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
20,57 (.810)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,84
(.112)
5,54(.218)
REAR FLANGE REF
REAR FLANGE REF
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.852)
16,56 (.652)
Resource
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
2,84
(.112)
Mounting
Hole
High Power
Contact
20,57
(.810)
Reader’s
8,28 (.326)
244
8,64 (.340)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
2 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
REAR FLANGE REF
6,91 (.272)
11,53 (.454)
9,68 (.381)
12,42 (.489)
12,42 (.489)
15,19 (.598)
REAR FLANGE REF
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
High Power 90° — Plug
63,50 (2.500)
63,50 (2.500)
22,86 (.900)
22,56 (.888)
22,86 (.900)
24,84 (.978)
22,10 (.870)
15,82 (.623)
15,24 (.600)
High Power
Contact
16,51(.650)
19,33 (.761)
High Power
Contact
10,16 (.400)
8,89 (.350)
16,56 (.652)
9,09 (.358)
Mounting Hole
2,54 3,81
(.100) (.150)
2,84
(.112)
4,37
(.172)
2,36
(.093)
Mounting Hole
11,10 (.437)
20,57 (.810)
20,57 (.810)
Signal
Contact
8,64 (.340)
11,53 (.454)
8,64 (.340)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
15,70 (.618)
11,05 (.435)
22,68 (.893)
15,70 (.618)
High Power
Contact
15,70 (.618)
High Power
Contact
8,71 (.343)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
5,54(.218)
2,84 (.112)
2,84 (.112)
Mounting
Hole
Mounting
Hole
2,80 (.110)
Signal
Contact
2,80 (.110)
11,53 (.454)
8,28 (.326)
Signal
Contact
20,57 (.810)
8,64 (.340)
8,28 (.326)
11,53 (.454)
20,57 (.810)
8,64 (.340)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
63,50 (2.500)
22,68 (.893)
22,68 (.893)
16,56 (.652)
15,70 (.618)
High Power
Contact
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Reader’s
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
Signal
Contact
2,84 (.112)
Mounting
Hole
2,80 (.110)
8,28 (.326)
11,53 (.454)
8,64 (.340)
20,57 (.810)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
17,96 (.707)
C
25W3
22 #20
3 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
245
PCB Hole Pattern — Standard
High Power 90° — Plug
61,12 (2.406)
61,12 (2.406)
20,57 (.810)
20,57 (.810)
15,19 (.598)
20,57 (.810)
20,57 (.810)
13,72 (.540)
13,72 (.540)
High
Power
Contact
13,72 (.540)
6,86 (.270)
6,86 (.270)
High
Power
Contact
12,42 (.489)
9,68 (.381)
6,86 (.270)
6,91 (.272)
4,14 (.163)
2,84 (.112)
Signal Contact
20,57 (.810)
Mounting
Hole
Mounting
Hole
Signal
Contact
2,84 (.112)
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
11,53 (.454)
8,28 (.326)
10,06
(.396)
20,57 (.810)
5,54(.218) 5,54(.218)
8,28 (.326)
13,82 (.544)
13,82 (.544)
16,56 (.652)
REAR FLANGE REF
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
22,10 (.870)
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
15,19 (.598)
20,57 (.810)
17,96 (.707)
20,57 (.810)
17,96 (.707)
15,19 (.598)
13,72 (.540)
15,19 (.598)
12,42 (.489)
12,42 (.489)
6,91 (.272)
12,42 (.489)
9,68 (.381)
9,68 (.381)
9,68 (.381)
High Power
Contact
6,91 (.272)
6,91 (.272)
Signal Contact
Mounting
Hole
Signal
Contact
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5.54(.218)
11,53 (.454)
8,28 (.326)
5,54(.218) 5,54(.218)
11,53 (.454)
10,06 (.396)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
Resource
20,57 (.810)
8,28 (.326)
11,05 (.435)
Reader’s
Mounting
Hole
2,84 (.112)
2,84 (.112)
246
High Power
Contact
6,91 (.272)
2,80 (.110)
2,80 (.110)
2,84 (.112)
REAR FLANGE REF
19,33 (.761)
13,82 (.544)
19,33 (.761)
D
43W2
41 #20
2 #8
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
22,10 (.870)
22,10 (.870)
10,06 (.396)
11,05 (.435)
16,56 (.652)
19,33 (.761)
20,57 (.810)
8,28 (.326)
13,82 (.544)
REAR FLANGE REF
16,56 (.652)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
9,68 (.381)
8,28 (.326)
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
19,33 (.761)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
13,82 (.544)
16,56 (.652)
16,56 (.652)
22,10 (.870)
11,05 (.435)
13,82 (.544)
REAR FLANGE REF
11,53 (.454)
8,28 (.326)
11,05 (.435)
11,05 (.435)
11,05 (.435)
REAR FLANGE REF
10,06 (.396)
8,28 (.326)
22,10 (.870)
D
47W1
46 #20
1 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
High Power 90° — Receptacle
25,00 (.984)
33,32 (1.312)
33,32 (1.312)
5,49
5,49
(.216) (.216)
6,86
(.270)
Signal
Contact
6,86
(.270)
6,86
(.270)
2,84
(.112)
High Power
Contact
2,74 (.108)
Mounting
Hole
Mounting
Hole
20,57
(.810)
High Power
Contact
8,64
(.340)
Signal
Contact
REAR FLANGE REF
REAR FLANGE REF
E
5W1
4 #20
1 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,49
(.216)
8,64
(.340)
8,64
(.340)
11,53 (.454)
REAR FLANGE REF
2,84 (.112)
High Power
Contact
20,57
(.810)
8,23
(.324)
6,86
(.270)
20,57
(.810)
11,53 (.454)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
Mounting
Hole
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
14,48 (.570)
14,48 (.570)
9,60 (.378)
9,60 (.378)
6,86
(.270)
6,86
(.270)
8,23 (.324)
2,84
(.112)
High Power
Contact
Mounting
Hole
Signal
Contact
5,94 (.234)
20,57
(.810)
5,49
(.216)
8,64
(.340)
5,49
(.216)
High Power
Contact
0,86 (.034)
Mounting
Hole
7,67 (.302)
11,53 (.454)
8,64 (.340)
20,57 (.810)
REAR FLANGE REF
8,23(.324)
8,23(.324)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
A
11W1
10 #20
1 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
5W5
0 #20
5 #8
47,04 (1.852)
14,48 (.570)
47,04 (1.852)
8,28 (.326)
14,48 (.570)
14,48 (.570)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
7,77 (.306)
5,54(.218)
2,84
(.112)
High Power
Contact
Mounting
Hole
4,14
(.163)
Signal
Contact
20,57 (.810)
2,84
(.112)
Mounting
Hole
High Power
Contact
2,80 (.110)
4,14
(.163)
Signal
Contact
11,53 (.454)
8,64 (.340)
6,91 (.272)
11,53 (.454)
8,64 (.340)
20,57 (.810)
6,91 (.272)
9,68 (.381)
9,68 (.381)
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
2,84
(.112)
Mounting
Hole
High Power
Contact
20,57
(.810)
8,28 (.326)
8,64 (.340)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
6,91 (.272)
12,42 (.489)
B
17W2
15 #20
2 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
REAR FLANGE REF
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
15,19 (.598)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
11,53 (.454)
9,68 (.381)
Reader’s
8,28 (.326)
247
PCB Hole Pattern — Standard
High Power 90° — Receptacle
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,86 (.900)
22,86 (.900)
22,56 (.888)
22,10 (.870)
15,82 (.623)
15,24 (.600)
16,51(.650)
10,16 (.400)
19,33 (.761)
High Power
Contact
8,89 (.350)
2,84
(.112)
3,81 2,54
(.150) (.100)
High Power
Contact
9,09 (.358)
16,56 (.652)
2,36
(.093)
4,37
(.172)
Mounting Hole
Mounting Hole
11,10 (.437)
20,57 (.810)
20,57 (.810)
Signal
Contact
8,64 (.340)
8,64 (.340)
11,53 (.454)
17,96 (.707)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
20.70 (.815)
23,47 (.924)
C
8W8
0 #20
8 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
15,70 (.618)
High Power
Contact
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
8,71 (.343)
15,70 (.618)
High Power
Contact
11,05 (.435)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
5,54(.218)
5,54(.218)
2,84 (.112)
22,68 (.893)
15,70 (.618)
2,84 (.112)
Mounting
Hole
Mounting
Hole
20,57 (.810)
2,80 (.110)
2,80 (.110)
Signal
Contact
Signal
Contact
8,28 (.326)
11,53 (.454)
8,64 (.340)
9,68 (.381)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
11,53 (.454)
20,57 (.810)
6,91 (.272)
6,91 (.272)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
C
17W5
12 #20
5 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
8,64 (.340)
C
21WA4
17 #20
4 #8
63,50 (2.500)
22,68 (.893)
22,68 (.893)
16,56 (.652)
High Power
Contact
15,70 (.618)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
Reader’s
Resource
5,54(.218) 5,54(.218)
248
Mounting
Hole
5,54(.218)
2,84 (.112)
2,80 (.110)
8,28 (.326)
20,57 (.810) 11,53(.454)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
6,91 (.272)
Signal
Contact
8,64 (.340)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
3 #8
Signal Contact X
0,76 (.030)
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard
High Power 90° — Receptacle
61,12 (2.406)
15,19 (.598)
20,57 (.810)
20,57 (.810)
13,72 (.540)
6,86 (.270)
13,72 (.540)
12,42 (.489)
High
Power
Contact
13,72 (.540)
6,86 (.270)
20,57 (.810)
20,57 (.810)
61,12 (2.406)
High Power
Contact
9,68 (.381)
6,86 (.270)
6,91 (.272)
4,14
(.163)
2,84 (.112)
Signal Contact
20,57 (.810)
Signal
Contact
2,84 (.112)
Mounting
Hole
Mounting
Hole
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
11,53 (.454)
8,28 (.326)
8,28 (.326)
19,33 (.761)
11,05 (.435)
13,82 (.544)
13,82 (.544)
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
22,10 (.870)
D
24W7
17 #20
7 #8
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
22,10 (.870)
10,06 (.396)
8,28 (.326)
8,28 (.326)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
20,57 (.810)
5,54(.218) 5,54(.218)
11,53 (.454)
11,05 (.435)
11,05 (.435)
REAR FLANGE REF
10,06 (.396)
22,10 (.870)
D
36W4
32 #20
4 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,57 (.810)
20,70 (.815)
20,57 (.810)
17,96 (.707)
15,19 (.598)
13,72 (.540)
15,19 (.598)
12,42 (.489)
High Power
Contact
9,68 (.381)
12,42 (.489)
9,68 (.381)
High Power
Contact
6,91 (.272)
9,68 (.381)
6,91 (.272)
6,91 (.272)
8,28 (.326)
8,28 (.326)
2,80 (.110)
2,80 (.110)
Signal Contact
Mounting
Hole
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
17,96 (.707)
2,84 (.112)
Mounting
Hole
Signal
Contact
2,84 (.112)
2,84 (.112)
2,84 (.112)
5,54(.218)
20,57 (.810)
5,54(.218) 5,54(.218)
10,06 (.396)
8,28 (.326)
11,05 (.435)
REAR FLANGE REF
11,53 (.454)
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
11,05 (.435)
13,82 (.544)
13,82 (.544)
19,33 (.761)
22,10 (.870)
22,10 (.870)
22,10 (.870)
Reader’s
D
43W2
41 #20
2 #8
REAR FLANGE REF
16,56 (.652)
19,33 (.761)
19,33 (.761)
11,53 (.454)
8,28 (.326)
16,56 (.652)
16,56 (.652)
19,33 (.761)
8,28 (.326)
11,05 (.435)
13,82 (.544)
22,10 (.870)
5,54(.218) 5,54(.218)
20,57 (.810)
10,06 (.396)
11,05 (.435)
13,82 (.544)
16,56 (.652)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218)
D
47W1
46 #20
1 #8
Recommended PCB Hole X
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
Recommended PCB Hole X
3,56 (.140)
Resource
Signal Contact X
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
249
PCB Hole Pattern — European
High Power 90° — Plug
25,00 (.984)
5,49
(.216)
Signal
Contact
33,32 (1.312)
33,32 (1.312)
6,86 (.270) 6,86 (.270)
6,86 (.270) 6,86 (.270)
5,49
(.216)
2,54
(.100)
High Power
Contact
Mounting
Hole
High Power
Contact
Mounting
Hole
Mounting
Hole
2,74 (.108)
2,54 (.100)
High Power
Contact
10,90
(.429)
9,40 (.370)
8,23 (.324)
10,90
(.429)
REAR FLANGE
REF
REAR FLANGE
REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
11,94 (.470)
REAR FLANGE
REF
E
5W1
4 #20
1 #8
5,49
(.216)
10,90
(.429)
REAR FLANGE
REF
Signal 9,40 (.370)
Contact
REAR FLANGE
REF
REAR FLANGE
REF
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
14,48 (.570)
14,48 (.570)
33,32 (1.312)
7,67 (.302)
9,60 (.378)
5,94 (.234)
9,60 (.378)
High Power
Contact
6,86 (.270) 6,86 (.270)
8,23 (.324)
Signal
Contact
2,54
(.100)
0,86 (.034)
High Power
Contact
10,90
(.429)
5,49
5,49
(.216) (.216)
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
10,90 (.429)
9,40 (.370)
REAR FLANGE
REF
REAR FLANGE
REF
A
11W1
10 #20
1 #8
11,94 (.470)
REAR FLANGE REF
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
7,77 (.306)
8,28 (.326)
8,28 (.326)
High Power
Contact
5,54(.218)
Mounting
Hole
Signal
Contact
10,90 (.429)
9,40 (.370)
4,14 (.163)
5,54(.218)
2,80 (.110)
10,90 (.429)
9,40 (.370)
11,94 (.470)
REAR FLANGE REF
REAR FLANGE REF
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.853)
Resource
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
High Power
Contact
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
8,28 (.326)
Signal
Contact
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
2,54 (.100)
2,80 (.110)
10,90 (.429)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
Signal
Contact
High Power
Contact
11,94 (.470)
10,90 (.429)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
9,68 (.381)
Reader’s
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
2 #8
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (P)
Recommended PCB Hole X
3,28 (.129)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
Signal Contact X
0,60 (.024)
9,40 (.370)
8,28 (.326)
6,91 (.272)
12,42 (.489)
250
11,94 (.470)
REAR FLANGE REF
9,68 (.381)
47,04 (1,852)
13,82 (.544)
Signal
Contact
4,14 (.163)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
5,54(.218)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
B
5W5
0 #20
5 #8
47,04 (1.852)
14,48 (.570)
High Power
Contact
Mounting
Hole
Mounting
Hole
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
High Power 90° — Plug
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
22,86 (.900)
19,33 (.761)
22,56 (.888)
22,86 (.900)
16,56 (.652)
15,82 (.623)
15,24 (.600)
16,51(.650)
8,89 (.350)
High Power
Contact
9,09 (.358)
10,16 (.400)
2,54 (.100) 3,81 (.150)
High Power
Contact
Mounting Hole
11,10 (.437)
2,36 (.093)
4,37 (.172)
Mounting
Hole
2,54 (.100)
10,90 (.429)
11,94 (.470)
10,90 (.429)
11,94 (.470)
REAR FLANGE REF
17,96 (.707)
REAR FLANGE REF
REAR FLANGE REF
9,40 (.370)
Signal
Contact
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
11,05 (.435)
8,71 (.343)
5,54(.218)
Mounting
Hole
5,54(.218)
10,90 (.429)
Mounting
Hole
11,94 (.470)
REAR FLANGE REF
9,40 (.370)
8,28 (.326)
Signal
Contact
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218) 5,54(.218)
5,54(.218)
6,91 (.272)
REAR FLANGE REF
8,28 (.326)
2,80 (.110)
9,40 (.370)
8,28 (.326)
Signal
Contact
11,05 (.435)
8,28 (.326)
High Power
Contact
11,94 (.470)
2,80 (.110)
10,90 (.429)
15,70 (.618)
11,05 (.435)
8,28 (.326)
High Power
Contact
22,68 (.893)
15,70 (.618)
6,91 (.272)
C
17W5
12 #20
5 #8
REAR FLANGE REF
9,68 (.381)
9,68 (.381)
C
21WA4
17 #20
4 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
Mounting
Hole
6,91 (.272)
REAR FLANGE REF
9,40 (.370)
8,28 (.326)
9,68 (.381)
8,28 (.326)
High Power
Contact
10,90 (.429)
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
12,42 (.489)
11,94 (.470)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
Mounting
Hole
2,80 (.110)
Signal
Contact
6,91 (.272)
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
11,94 (.470)
2,80 (.110)
Signal
Contact
11,05 (.435)
6,91 (.272)
12,42 (.489)
15,19 (.598)
15,19 (.598)
REAR FLANGE REF
9,68 (.381)
15,19 (.598)
Reader’s
5,54(.218) 5,54(.218)
5,54(.218)
10,90 (.429)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
16,56 (.652)
16,56 (.652)
16,56 (.652)
15,70 (.618)
High Power
Contact
22,68 (.893)
22,68 (.893)
17,96 (.707)
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (P)
Recommended PCB Hole X
3,28 (.129)
C
27W2
25 #20
2 #8
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Dimensions are shown in mm (inch)
Dimensions subject to change
251
PCB Hole Pattern — European
High Power 90° — Receptacle
33,32 (1.312)
25,00 (.984)
33,32 (1.312)
6,86 (.270) 6,86 (.270)
5,49
(.216)
Signal
Contact
5,49
(.216)
2,54
(.100)
6,86 (.270) 6,86 (.270)
High Power
Contact
Mounting
Hole
High Power
Contact
Mounting
Hole
Mounting
Hole
2,74 (.108)
2,54 (.100)
High Power
Contact
10,90
(.429)
10,90
(.429)
9,40 (.370)
8,23 (.324)
REAR FLANGE
REF
REAR FLANGE
REF
REAR FLANGE
REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
11,94 (.470)
E
5W1
4 #20
1 #8
5,49
(.216)
10,90
(.429)
REAR FLANGE
REF
Signal 9,40 (.370)
Contact
REAR FLANGE
REF
REAR FLANGE
REF
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
9,60 (.378)
14,48 (.570)
14,48 (.570)
33,32 (1.312)
5,94 (.234)
9,60 (.378)
7,67 (.302)
6,86 (.270) 6,86 (.270)
8,23 (.324)
Signal
Contact
2,54
(.100)
Mounting
Hole
High Power
Contact
10,90
(.429)
5,49
5,49
(.216) (.216)
8,23 (.324) 8,23 (.324)
10,90 (.429)
9,40 (.370)
11,94 (.470)
REAR FLANGE
REF
REAR FLANGE
REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
A
11W1
10 #20
1 #8
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
7,77 (.306)
8,28 (.326)
8,28 (.326)
High Power
Contact
5,54(.218)
Mounting
Hole
4,14 (.163)
9,40 (.370)
5,54(.218)
11,94 (.470)
Signal
Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
9W4
5 #20
4 #8
REAR FLANGE REF
9,68 (.381)
B
13W3
10 #20
3 #8
Resource
47,04 (1,852)
Reader’s
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
High Power
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
Mounting
Hole
11,05 (.435)
8,28 (.326)
Signal
Contact
8,28 (.326)
5,54(.218) 5,54(.218)
2,54 (.100)
2,80 (.110)
10,90 (.429)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
252
47,04 (1.853)
13,82 (.544)
13,82 (.544)
9,40 (.370)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
10,90 (.429)
2,80 (.110)
4,14 (.163)
6,91 (.272)
REAR FLANGE REF
High Power
Contact
5,54(.218)
Mounting
Hole
10,90 (.429)
Signal
Contact
REAR FLANGE REF
B
5W5
0 #20
5 #8
47,04 (1.852)
14,48 (.570)
11,94 (.470)
High Power
Contact
0,86 (.034)
Mounting
Hole
9,68 (.381)
Signal
Contact
High Power
Contact
11,94 (.470)
10,90 (.429)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
2 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (P)
Recommended PCB Hole X
3,28 (.129)
9,40 (.370)
8,28 (.326)
6,91 (.272)
6,91 (.272)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
High Power 90° — Receptacle
63,50 (2.500)
63,50 (2.500)
24,84 (.978)
22,10 (.870)
22,86 (.900)
22,86 (.900)
16,51(.650)
10,16 (.400)
22,56 (.888)
16,56 (.652)
8,89 (.350)
3,81 (.150)
Mounting Hole
19,33 (.761)
15,24 (.600)
15,82 (.623)
9,09 (.358)
11,10 (.437)
2,54 (.100)
High Power
Contact
2,36 (.093)
4,37 (.172)
High Power
Contact
Mounting
Hole
2,54 (.100)
11,94 (.470)
10,90 (.429)
9,40 (.370)
REAR FLANGE REF
11,94 (.470)
Signal
Contact
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
8,71 (.343)
11,05 (.435)
High Power
Contact
5,54(.218)
Signal
Contact
10,90 (.429)
REAR FLANGE REF
6,91 (.272)
C
21WA4
17 #20
4 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
16,56 (.652)
22,68 (.893)
13,82 (.544)
11,05 (.435)
11,05 (.435)
High Power
Contact
8,28 (.326)
High Power
Contact
6,91 (.272)
10,90 (.429)
Signal
Contact
10,90 (.429)
REAR FLANGE REF
12,42 (.489)
9,68 (.381)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
15,19 (.598)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
11,94 (.470)
2,80 (.110)
Signal
Contact
6,91 (.272)
9,68 (.381)
Mounting
Hole
5,54(.218)
2,80 (.110)
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
8,28 (.326)
11,05 (.435)
12,42 (.489)
15,19 (.598)
Reader’s
8,28 (.326)
5,54(.218) 5,54(.218)
REAR FLANGE REF
13,82 (.544)
13,82 (.544)
8,28 (.326)
9,40 (.370)
16,56 (.652)
16,56 (.652)
15,70 (.618)
11,05 (.435)
REAR FLANGE REF
9,68 (.381)
9,68 (.381)
C
17W5
12 #20
5 #8
11,94 (.470)
9,40 (.370)
8,28 (.326)
Signal
Contact
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
Mounting
Hole
11,94 (.470)
2,80 (.110)
10,90 (.429)
6,91 (.272)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
5,54(.218)
8,28 (.326)
REAR FLANGE REF
8,28 (.326)
5,54(.218) 5,54(.218)
2,80 (.110)
9,40 (.370)
11,05 (.435)
8,28 (.326)
High Power
Contact
5,54(.218)
11,94 (.470)
15,70 (.618)
11,05 (.435)
8,28 (.326)
Mounting
Hole
22,68 (.893)
15,70 (.618)
15,70 (.618)
15,19 (.598)
17,96 (.707)
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (P)
Recommended PCB Hole X
3,28 (.129)
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
253
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Plug
33,32 (1.312)
33,32 (1.312)
25,00 (.984)
Signal
Contact
5,49
(.216)
6,86
(.270)
5,49
(.216)
6,86
(.270)
2,84 (.112)
Mounting
Hole
2,74 (.108)
Mounting
Hole
High Power/
High Voltage
Contact
6,86
(.270)
6,86
(.270)
High Power/
High Voltage
Contact
Mounting
Hole
Signal
Contact
High Power/
High Voltage
Contact
2,84 (.112)
5,49
(.216)
8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1 #8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
14,48 (.570)
14,48 (.570)
9,60 (.378)
9,60 (.378)
6,86 (.270)
6,86 (.270)
7,67 (.302)
5,94 (.234)
8,23 (.324)
0,86
(.034)
2,84
(.112)
Mounting
Hole
Signal
Contact
5,49
(.216)
5,49
(.216)
High Power/
High Voltage
Contact
Mounting
Hole
High Power/ High Voltage
Contact
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
7,77 (.306)
14,48 (.570)
7,77 (.306)
8,28 (.326)
8,28 (.326)
5,54(.218)
5,54(.218)
5,54(.218)
2,84 (.112)
Mounting
Hole
High Power/
High Voltage
Contact
4,14 (.163)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
2,84 (.112)
2,80 (.110)
Mounting
Hole
Signal
Contact
High Power/ 4,14 (.163)
High Voltage
Contact
Signal
Contact
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
Resource
47,04 (1.852)
47,04 (1.852)
13,82 (.544)
Reader’s
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
Mounting Hole
Signal
Contact
6,91 (.272)
9,68 (.381)
B
17W2
15 #20
2 #8
11,05 (.435)
8,28 (.326)
Signal
Contact
2,84 (.112)
8,28 (.326)
5,54(.218) 5,54(.218)
2,84 (.112)
High Power/
High Voltage
Contact
Mounting Hole
8,28 (.326)
8,28 (.326)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
High Power/
High Voltage
Contact
2,80 (.110)
6,91 (.272)
254
16,56 (.652)
16,56 (.652)
13,82 (.544)
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
6,91 (.272)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Plug
63,50 (2.500)
63.50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
22,86 (.900)
22,86 (.900)
16,51(.650)
15,24 (.600)
8,89 (.350)
High Power/
High Voltage
Contact
22,56 (.888)
15,82 (.623)
10,16 (.400)
2,54 (.100)
16,56 (.652)
Mounting
Hole
3,81 (.150)
9,09 (.358)
High Power/
High Voltage
Contact
11,10 (.437)
2,36 (.093)
4,37 (.172)
2,84
(.112)
Signal
Contact
Mounting
Hole
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
22,68 (.893)
15,70 (.618)
15,70 (.618)
15,70 (.618)
11,05 (.435)
15,70 (.618)
11,05 (.435)
8,71 (.343)
8,28 (.326)
High Power/
High Voltage
Contact
22,68 (.893)
5,54(.218)
2,84
(.112)
5,54(.218)
8,28 (.326)
High Power/
High Voltage
Contact
Signal
Contact
2,80 (.110)
Signal
Contact
8,28 (.326)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
C
17W5
12 #20
5 #8
22,68 (.893)
22,68 (.893)
16,56 (.652)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
2,84
(.112)
5,54(.218)
High Power/
High Voltage
Contact
Signal
Contact
9,68 (.381)
5,54(.218)
6,91 (.272)
15,19 (.598)
17,96 (.707)
8,28 (.326)
6,91 (.272)
9,68 (.381)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
12,42 (.489)
15,19 (.598)
15,19 (.598)
Resource
C
25W3
22 #20
3 #8
2,84
(.112)
2,80 (.110)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting Hole
8,28 (.326)
6,91 (.272)
11,05 (.435)
8,28 (.326)
Signal
Contact
2,80 (.110)
Mounting Hole
13,82 (.544)
13,82 (.544)
11,05 (.435)
Reader’s
High Power/
High Voltage
Contact
22,68 (.893)
16,56 (.652)
16,56 (.652)
13,82 (.544)
8,28 (.326)
9,68 (.381)
63,50 (2.500)
22,68 (.893)
11,05 (.435)
6,91 (.272)
C
21WA4
17 #20
4 #8
63,50 (2.500)
15,70 (.618)
2,84
(.112)
5,54(.218)
Mounting Hole
8,28 (.326)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
5,54(.218) 5,54(.218)
2,80 (.110)
Mounting Hole
11,05 (.435)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
255
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Plug
61,12 (2.406)
61,12 (2.406)
20,57 (.810)
20,57 (.810)
20,57 (.810)
20,57 (.810)
15,19 (.598)
13,72 (.540)
13,72 (.540)
12,42 (.489)
13,72 (.540)
6,86 (.270)
9,68 (.381)
High Power/
High Voltage
Contact
6,86 (.270)
6,86 (.270)
6,91 (.272)
High Power/
High Voltage
Contact
4,14 (.163)
Mounting
Hole
Mounting
Hole
2,84 (.112)
2,84 (.112)
1,42 (.056)
1,42 (.056)
2,84 (.112)
2,84 (.112)
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
16,56 (.652)
19,33 (.761)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
22,10 (.870)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
22,10 (.870)
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
20,57 (.810)
17,96 (.707)
15,19 (.598)
15,19 (.598)
6,91 (.272)
9,68 (.381)
6,91 (.272)
6,91 (.272)
High Power/
High Voltage
Contact
2,84 (.112)
9,68 (.381)
6,91 (.272)
High Power/
High Voltage
Contact
8,28 (.326)
Mounting
Hole
2,80 (.110)
1,42 (.056)
2,84 (.112)
Mounting
Hole
2,80 (.110)
2,84 (.112)
1,42 (.056)
2,84 (.112)
5,54(.218)
5,54(.218)
Signal Contact
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
D
43W2
41 #20
2 #8
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
16,56 (.652)
8,28 (.326)
11,05 (.435)
13,82 (.544)
13,82 (.544)
Resource
12,42 (.489)
9,68 (.381)
8,28 (.326)
Reader’s
15,19 (.598)
12,42 (.489)
9,68 (.381)
256
20,57 (.810)
17,96 (.707)
13,72 (.540)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218)
Signal Contact
D
47W1
46 #20
1 #8
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Receptacle
33,32 (1.312)
33,32 (1.312)
25,00 (.984)
6,86
(.270)
Signal
Contact
5,49
(.216)
6,86
(.270)
5,49
(.216)
2,84 (.112)
Mounting
Hole
6,86
(.270)
High Power/
High Voltage
Contact
Mounting
Hole
High Power/
High Voltage
Contact
6,86
(.270)
2,74 (.108)
Mounting
Hole
High Power/
High Voltage
Contact
2,84 (.112)
5,49
(.216)
Signal
Contact
8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1 #8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
47,04 (1.852)
33,32 (1.312)
14,48 (.570)
9,60 (.378)
9,60 (.378)
6,86 (.270)
6,86 (.270)
14,48 (.570)
7,67 (.302)
5,94 (.234)
8,23 (.324)
2,84
(.112)
Mounting
Hole
5,49
(.216)
Signal
Contact
5,49
(.216)
0,86
(.034)
High Power/
High Voltage
Contact
Mounting
Hole
High Power/ High Voltage
Contact
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
A
11W1
10 #20
1 #8
B
5W5
0 #20
5 #8
47,04 (1.852)
47,04 (1.852)
14,48 (.570)
14,48 (.570)
14,48 (.570)
8,28 (.326)
7,77 (.306)
14,48 (.570)
8,28 (.326)
7,77 (.306)
5,54(.218)
5,54(.218)
5,54(.218)
2,84
(.112)
2,84 (.112)
2,80 (.110)
Signal
Contact
4,14 (.163)
High Power/
High Voltage
Contact
Mounting
Hole
4,14 (.163)
Mounting
Hole
Signal
Contact
High Power/
High Voltage
Contact
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
47,04 (1.852)
47,04 (1.852)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
High Power/
High Voltage
Contact
5,54(.218)
Mounting Hole
Signal
Contact
Signal
Contact
2,84 (.112)
2,80 (.110)
6,91 (.272)
6,91 (.272)
9,68 (.381)
2,84 (.112)
High Power/
High Voltage
Contact
Mounting Hole
8,28 (.326)
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
Resource
B
17W2
15 #20
2 #8
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
8,28 (.326)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
Reader’s
16,56 (.652)
16,56 (.652)
13,82 (.544)
12,42 (.489)
15,19 (.598)
15,19 (.598)
B
21W1
20 #20
1 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
257
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Receptacle
63,50 (2.500)
63.50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
22,86 (.900)
22,86 (.900)
16,51(.650)
10,16 (.400)
Mounting
Hole
16,56 (.652)
22,56 (.888)
15,24 (.600)
15,82 (.623)
8,89 (.350)
3,81 (.150)
11,10 (.437)
High Power/
High Voltage
Contact
2,54 (.100)
9,09 (.358)
4,37 (.172)
High Power/
High Voltage
Contact
2,36 (.093)
2,84
(.112)
Mounting
Hole
Signal
Contact
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
63,50 (2.500)
63,50 (2.500)
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
15,70 (.618)
8,71 (.343)
15,70 (.618)
11,05 (.435)
8,28 (.326)
High Power/
High Voltage
Contact
Signal
Contact
8,28 (.326)
Mounting Hole
8,28 (.326)
6,91 (.272)
9,68 (.381)
9,68 (.381)
C
17W5
12 #20
5 #8
22,68 (.893)
22,68 (.893)
15,70 (.618)
22,68 (.893)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
11,05 (.435)
11,05 (.435)
8,28 (.326)
High Power/
High Voltage
Contact
5,54(.218) 5,54(.218)
Resource
9,68 (.381)
63,50 (2.500)
22,68 (.893)
Reader’s
6,91 (.272)
C
21WA4
17 #20
4 #8
63,50 (2.500)
258
2,84
(.112)
2,80 (.110)
Signal
Contact
Mounting Hole
6,91 (.272)
2,84
(.112)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,80 (.110)
16,56 (.652)
11,05 (.435)
8,28 (.326)
High Power/
High Voltage
Contact
5,54(.218)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
15,70 (.618)
11,05 (.435)
5,54(.218)
2,84
(.112)
22,68 (.893)
High Power/
High Voltage
Contact
5,54(.218)
8,28 (.326)
Signal
Contact
5,54(.218)
2,80 (.110)
8,28 (.326)
6,91 (.272)
9,68 (.381)
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
2,84
(.112)
2,80 (.110)
Signal
Contact
Mounting Hole
Mounting Hole
6,91 (.272)
8,28 (.326)
6,91 (.272)
9,68 (.381)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
12,42 (.489)
15,19 (.598)
15,19 (.598)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
3 #8
Signal Contact X
0,60 (.024)
0,76 (.030)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
C
27W2
25 #20
2 #8
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
High Power/Voltage Straight — Receptacle
61,12 (2.406)
61,12 (2.406)
20,57 (.810)
20,57 (.810)
20,57 (.810)
20,57 (.810)
15,19 (.598)
13,72 (.540)
6,86 (.270)
13,72 (.540)
12,42 (.489)
13,72 (.540)
9,68 (.381)
High Power/
High Voltage
Contact
6,86 (.270)
6,91 (.272)
6,86 (.270)
High Power/
High Voltage
Contact
4,14 (.163)
Mounting
Hole
2,84 (.112)
2,84 (.112)
1,42 (.056)
Mounting
Hole
1,42 (.056)
2,84 (.112)
2,84 (.112)
5,54(.218)
8,28 (.326)
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
8,28 (.326)
11,05 (.435)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
16,56 (.652)
19,33 (.761)
22,10 (.870)
22,10 (.870)
13,82 (.544)
16,56 (.652)
19,33 (.761)
19,33 (.761)
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
8,28 (.326)
11,05 (.435)
13,82 (.544)
13,82 (.544)
Signal Contact
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
19,33 (.761)
22,10 (.870)
22,10 (.870)
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,57 (.810)
20,70 (.815)
17,96 (.707)
15,19 (.598)
13,72 (.540)
9,68 (.381)
6,91 (.272)
12,42 (.489)
12,42 (.489)
9,68 (.381)
9,68 (.381)
6,91 (.272)
6,91 (.272)
High Power/
High Voltage
Contact
8,28 (.326)
Mounting
Hole
15,19 (.598)
15,19 (.598)
12,42 (.489)
High Power/
High Voltage
Contact
17,96 (.707)
20,57 (.810)
8,28 (.326)
Mounting
Hole
2,80 (.110)
9,68 (.381)
6,91 (.272)
2,80 (.110)
2,84 (.112)
1,42 (.056)
2,84 (.112)
1,42 (.056)
2,84 (.112)
5,54(.218)
Signal Contact
2,84 (.112)
5,54(.218)
Signal Contact
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
22,10 (.870)
22,10 (.870)
30,56 (1.203)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
43W2
41 #20
2 #8
D
47W1
46 #20
1 #8
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Size 8 Contact Type
High Power (H)
High Voltage (V)
Recommended PCB Hole X
3,56 (.140)
1,96 (.077)
Resource
Signal Contact X
0,60 (.024)
0,76 (.030)
Reader’s
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
13,82 (.544)
16,56 (.652)
19,33 (.761)
19,33 (.761)
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
8,28 (.326)
Dimensions are shown in mm (inch)
Dimensions subject to change
259
PCB Hole Pattern — European
90° PC Tails — Plug
33,32 (1.312)
25,00 (.984)
33,32 (1.312)
9,60 (.378)
5,49(.216) 5,49(.216)
Signal
Contact
Mounting
Hole
6,86 (.270)
8,23 (.324)
Signal
Contact
2,74 (.108)
2,54(.100)
9,60 (.378)
6,86 (.270)
Mounting
Hole
Mounting
Hole
2,54(.100)
2,54 (.100)
10,90 (.429)
10,90 (.429)
9,40 (.370)
8,23 (.324)
5,49(.216)
Signal
Contact
9,40 (.370)
9,40 (.370)
10,90 (.429)
5,49(.216) 5,49(.216)
8,23 (.324)
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
47,04 (1.852)
8,28 (.326)
8,28 (.326)
5,54(.218)
2,54 (.100)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
9,68 (.381)
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
Mounting
Hole
Reader’s
Resource
5,54(.218) 5,54(.218)
260
Signal
Contact
4,14 (.163)
9,40 (.370)
6,91 (.272)
REAR FLANGE REF
2,54 (.100)
2,80 (.110)
10,90 (.429)
Signal
Contact
4,14 (.163)
Mounting
Hole
5,54(.218)
Mounting
Hole
5,54(.218)
9,40 (.370)
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
47,04 (1.852)
10,90 (.429)
8,23 (.324)
5,54(.218)
Signal
Contact
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
2,54 (.100)
2,54
(.100)
10,90 (.429)
Signal
Contact
2,80 (.110)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
10,90 (.429)
9,40 (.370)
6,91 (.272)
9,68 (.381)
6,91 (.272)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
12,42 (.489)
15,19 (.598)
B
17W2
15 #20
0 #8
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
9,40 (.370)
8,28 (.326)
15,19 (.598)
B
21W1
20 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
90° PC Tails — Plug
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
16,56 (.652)
Mounting
Hole
2,54(.100)
10,90 (.429)
Signal
Contact
17,96 (.707)
REAR FLANGE REF
9,40 (.370)
REAR FLANGE REF
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
0 #8
63,50 (2.500)
63,50 (2.500)
11,05 (.435)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
5,54(.218)
Mounting
Hole
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
8,28 (.326)
5,54(.218)
2,54 (.100)
2,54 (.100)
2,80 (.110)
2,80 (.110)
10,90 (.429)
Signal
Contact
8,28 (.326)
10,90 (.429)
9,40 (.370)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
REAR FLANGE REF
C
17W5
12 #20
0 #8
9,68 (.381)
9,40 (.370)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
C
21WA4
17 #20
0 #8
C
27W2
25 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
C
25W3
22 #20
0 #8
Reader’s
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
9,68 (.381)
8,28 (.326)
6,91 (.272)
6,91 (.272)
REAR FLANGE REF
Signal
Contact
Dimensions are shown in mm (inch)
Dimensions subject to change
261
PCB Hole Pattern — European
90° PC Tails — Plug
61,12 (2.406)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
4,14 (.163)
2,84 (.112)
Mounting
Hole
Signal Contact
2,54 (.100)
2,54 (.100)
12,27
(.483)
9,40 (.370)
5,54(.218)
5,54(.218) 5,54(.218)
9,40 (.370)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
REAR FLANGE REF
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
13,82 (.544)
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
17,96 (.707)
17,96 (.707)
15,19 (.598)
15,19 (.598)
15,19 (.598)
12,42 (.489)
12,42 (.489)
9,68 (.381)
9,68 (.381)
9,68 (.381)
6,91 (.272)
12,42 (.489)
6,91 (.272)
6,91 (.272)
8,28 (.326)
8,28 (.326)
Mounting
Hole
2,80 (.110)
9,68 (.381)
6,91 (.272)
Signal Contact
Mounting Hole
2,80 (.110)
Signal Contact
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
12,27 (.483)
5,54(.218)
9,40 (.370)
8,28 (.326)
REAR FLANGE REF
11,05 (.435)
Reader’s
Resource
13,82 (.544)
5,54(.218) 5,54(.218)
262
11,05 (.435)
REAR FLANGE REF
REAR FLANGE REF
13,82 (.544)
19,33 (.761)
11,05 (.435)
8,28 (.326)
11,05 (.435)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
D
43W2
41 #20
0 #8
REAR FLANGE REF
13,82 (.544)
13,82 (.544)
16,56 (.652)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
8,28 (.326)
16,56 (.652)
12,27 (.483)
5,54(.218)
9,40 (.370)
5,54(.218) 5,54(.218)
22,10 (.870)
D
47W1
46 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
90° PC Tails — Receptacle
33,32 (1.312)
25,00 (.984)
33,32 (1.312)
9,60 (.378)
Signal
Contact
5,49(.216) 5,49(.216)
6,86 (.270)
Mounting
Hole
Mounting
Hole
8,23 (.324)
Signal
Contact
2,74 (.108)
2,54(.100)
9,60 (.378)
6,86 (.270)
Mounting
Hole
2,54(.100)
2,54 (.100)
10,90 (.429)
10,90 (.429)
9,40 (.370)
8,23 (.324)
5,49(.216)
Signal
Contact
9,40 (.370)
9,40 (.370)
10,90 (.429)
5,49(.216) 5,49(.216)
8,23 (.324)
REAR FLANGE REF
REAR FLANGE REF
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
E
5W1
4 #20
0 #8
REAR FLANGE REF
REAR FLANGE REF
REAR FLANGE REF
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
8,28 (.326)
8,28 (.326)
Mounting
Hole
Mounting
Hole
5,54(.218)
2,54 (.100)
5,54(.218)
5,54(.218)
2,54 (.100)
Signal
Contact
2,80 (.110)
Signal
Contact
10,90 (.429)
4,14 (.163)
9,40 (.370)
REAR FLANGE REF
B
13W3
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
5,54(.218)
9,40 (.370)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
B
9W4
5 #20
0 #8
8,28 (.326)
10,90 (.429)
4,14 (.163)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,23 (.324)
8,28 (.326)
Signal
Contact
8,28 (.326)
Mounting
Hole
5,54(.218) 5,54(.218)
2,54 (.100)
10,90 (.429)
Signal
Contact
2,80 (.110)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
9,40 (.370)
10,90 (.429)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
REAR FLANGE REF
9,68 (.381)
6,91 (.272)
12,42 (.489)
15,19 (.598)
B
17W2
15 #20
0 #8
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
9,40 (.370)
8,28 (.326)
6,91 (.272)
15,19 (.598)
B
21W1
20 #20
0 #8
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Signal Contact X
0,60 (.024)
Reader’s
2,54
(.100)
Dimensions are shown in mm (inch)
Dimensions subject to change
263
PCB Hole Pattern — European
90° PC Tails — Receptacle
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
16,56 (.652)
Mounting
Hole
2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
Signal
Contact
17,96 (.707)
REAR FLANGE REF
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
0 #8
63,50 (2.500)
63,50 (2.500)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218)
2,80 (.110)
9,40 (.370)
10,90 (.429)
Signal
Contact
10,90 (.429)
6,91 (.272)
Signal
Contact
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
REAR FLANGE REF
C
17W5
12 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Mounting
Hole
2,54 (.100)
2,80 (.110)
8,28 (.326)
REAR FLANGE REF
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,54 (.100)
11,05 (.435)
8,28 (.326)
5,54(.218)
9,68 (.381)
9,40 (.370)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
C
21WA4
17 #20
0 #8
63,50 (2.500)
16,56 (.652)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Mounting
Hole
5,54(.218)
Reader’s
Resource
2,54 (.100)
264
8,28 (.326)
5,54(.218) 5,54(.218)
2,80 (.110)
9,40 (.370)
8,28 (.326)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
10,90 (.429)
Signal
Contact
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
90° PC Tails — Receptacle
61,12 (2.406)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
4,14 (.163)
2,84 (.112)
Mounting
Hole
Signal Contact
2,54 (.100)
2,54 (.100)
9,40 (.370)
12,27 (.483)
5,54(.218)
9,40 (.370)
5,54(.218) 5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
11,05 (.435)
REAR FLANGE REF
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
REAR FLANGE REF
13,82 (.544)
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
17,96 (.707)
17,96 (.707)
15,19 (.598)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
9,68 (.381)
6,91 (.272)
Mounting
Hole
2,80 (.110)
5,54(.218)
8,28 (.326)
2,80 (.110)
2,54 (.100)
2,54 (.100)
2,54 (.100)
2,54 (.100)
12,27 (.483)
9,40 (.370)
5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
REAR FLANGE REF
11,05 (.435)
REAR FLANGE REF
REAR FLANGE REF
13,82 (.544)
11,05 (.435)
19,33 (.761)
16,56 (.652)
19,33 (.761)
22,10 (.870)
19,33 (.761)
22,10 (.870)
D
43W2
41 #20
0 #8
REAR FLANGE REF
13,82 (.544)
16,56 (.652)
22,10 (.870)
D
47W1
46 #20
0 #8
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Signal Contact X
0,60 (.024)
Reader’s
19,33 (.761)
11,05 (.435)
8,28 (.326)
13,82 (.544)
16,56 (.652)
22,10 (.870)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
11,05 (.435)
16,56 (.652)
9,40 (.370)
5,54(.218) 5,54(.218)
8,28 (.326)
13,82 (.544)
9,68 (.381)
6,91 (.272)
Signal Contact
Signal Contact
12,27 (.483)
12,42 (.489)
9,68 (.381)
6,91 (.272)
8,28 (.326)
Mounting
Hole
15,19 (.598)
12,42 (.489)
Dimensions are shown in mm (inch)
Dimensions subject to change
265
PCB Hole Pattern — Standard/European
Straight PC Tails — Plug
33,32 (1.312)
25,00 (.984)
33,32 (1.312)
9,60 (.378)
Signal
Contact
5,49
(.216)
6,86
(.270)
5,49
(.216)
Mounting
Hole
2,84
(.112)
2,74 (.108)
Signal
Contact
Mounting
Hole
2,84
(.112)
Mounting
Hole
9,60 (.378)
6,86
(.270)
8,23 (.324)
2,84
(.112)
Signal
Contact
5,49(.216)
8,23 (.324)
5,49
(.216)
5,49
(.216)
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
8,28 (.326)
8,28 (.326)
5,54(.218)
5,54(.218)
Mounting Hole
Mounting Hole
4,14 (.163)
2,84 (.112)
5,54(.218)
2,84 (.112)
Signal
Contact
Signal Contact
2,80 (.110)
4,14 (.163)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
8,28 (.326)
8,28 (.326)
8,28 (.326)
5,54(.218) 5,54(.218)
Reader’s
Resource
5,54(.218)
266
Mounting Hole
Signal
Contact
Signal
Contact
2,84
(.112)
2,84 (.112)
2,80 (.110)
Mounting Hole
8,28 (.326)
8,28 (.326)
6,91 (.272)
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
12,42 (.489)
15,19 (.598)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
0 #8
15,19 (.598)
B
21W1
20 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
Straight PC Tails — Plug
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
16,56 (.652)
Mounting
Hole
2,84
(.112)
Signal
Contact
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
0 #8
63,50 (2.500)
63,50 (2.500)
11,05 (.435)
11,05 (.435)
8,28 (.326)
Signal
Contact
5,54(.218)
2,84 (.112)
2,80 (.110)
2,84 (.112)
2,80 (.110)
Mounting Hole
8,28 (.326)
Signal
Contact
6,91 (.272)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
Mounting Hole
11,05 (.435)
8,28 (.326)
5,54(.218)
9,68 (.381)
C
17W5
12 #20
0 #8
6,91 (.272)
9,68 (.381)
C
21WA4
17 #20
0 #8
63,50 (2.500)
63,50 (2.500)
16,56 (.652)
8,28 (.326)
8,28 (.326)
Signal
Contact
5,54(.218) 5,54(.218)
2,80 (.110)
Mounting Hole
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,84 (.112)
5,54(.218)
2,84 (.112)
2,80 (.110)
Signal
Contact
8,28 (.326)
8,28 (.326)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
12,42 (.489)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
15,19 (.598)
Reader’s
5,54(.218) 5,54(.218)
Mounting Hole
11,05 (.435)
11,05 (.435)
8,28 (.326)
5,54(.218)
13,82 (.544)
13,82 (.544)
11,05 (.435)
11,05 (.435)
16,56 (.652)
16,56 (.652)
13,82 (.544)
17,96 (.707)
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Dimensions are shown in mm (inch)
Dimensions subject to change
267
PCB Hole Pattern — Standard/European
Straight PC Tails — Plug
61,12 (2.406)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
4,14 (.163)
61,12 (2.406)
Mounting
Hole
Mounting
Hole
2,84 (.112)
2,84 (.112)
Signal Contact
2,84 (.112)
Signal Contact
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
16,56 (.652)
19,33 (.761)
22,10 (.870)
22,10 (.870)
13,82 (.544)
16,56 (.652)
19,33 (.761)
19,33 (.761)
11,05 (.435)
13,82 (.544)
16,56 (.652)
16,56 (.652)
8,28 (.326)
11,05 (.435)
19,33 (.761)
22,10 (.870)
22,10 (.870)
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
17,96 (.707)
17,96 (.707)
15,19 (.598)
15,19 (.598)
12,42 (.489)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
9,68 (.381)
12,42 (.489)
9,68 (.381)
6,91 (.272)
6,91 (.272)
8,28 (.326)
8,28 (.326)
Mounting
Hole
2,80 (.110)
9,68 (.381)
6,91 (.272)
Mounting
Hole
2,80 (.110)
Signal Contact
2,84 (.112)
2,84 (.112)
2,84 (.112)
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
8,28 (.326)
Resource
Reader’s
11,05 (.435)
13,82 (.544)
13,82 (.544)
16,56 (.652)
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
11,05 (.435)
16,56 (.652)
19,33 (.761)
19,33 (.761)
8,28 (.326)
13,82 (.544)
16,56 (.652)
16,56 (.652)
268
8,28 (.326)
11,05 (.435)
13,82 (.544)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact
22,10 (.870)
22,10 (.870)
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
Straight PC Tails — Receptacle
33,32 (1.312)
25,00 (.984)
33,32 (1.312)
9,60 (.378)
9,60 (.378)
Signal
Contact
5,49
(.216)
6,86
(.270)
5,49
(.216)
Mounting
Hole
2,84
(.112)
Signal
Contact
Mounting
Hole
2,84
(.112)
2,74 (.108)
Mounting
Hole
6,86
(.270)
8,23 (.324)
2,84
(.112)
Signal
Contact
5,49(.216)
8,23 (.324)
5,49
(.216)
5,49
(.216)
8,23 (.324) 8,23 (.324)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
8,28 (.326)
8,28 (.326)
5,54(.218)
5,54(.218)
2,84 (.112)
2,84 (.112)
4,14 (.163)
Signal
Contact
2,80 (.110)
Mounting Hole
Signal Contact
Mounting Hole
4,14 (.163)
6,91 (.272)
6,91 (.272)
9,68 (.381)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218)
9,68 (.381)
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
47,04 (1.852)
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
Mounting Hole
Signal
Contact
Signal
Contact
5,54(.218) 5,54(.218)
2,84
(.112)
2,84 (.112)
2,80 (.110)
Mounting Hole
8,28 (.326)
8,28 (.326)
6,91 (.272)
9,68 (.381)
8,28 (.326)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
B
17W2
15 #20
0 #8
15,19 (.598)
B
21W1
20 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Reader’s
5,54(.218) 5,54(.218)
5,54(.218)
11,05 (.435)
8,28 (.326)
Dimensions are shown in mm (inch)
Dimensions subject to change
269
PCB Hole Pattern — Standard/European
Straight PC Tails — Receptacle
63,50 (2.500)
24,84 (.978)
22,10 (.870)
19,33 (.761)
Mounting
Hole
2,84
(.112)
16,56 (.652)
Signal
Contact
17,96 (.707)
20.70 (.815)
23,47 (.924)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
0 #8
63,50 (2.500)
63,50 (2.500)
11,05 (.435)
11,05 (.435)
8,28 (.326)
2,80 (.110)
5,54(.218)
Signal
Contact
8,28 (.326)
Mounting Hole
Signal
Contact
9,68 (.381)
9,68 (.381)
C
21WA4
17 #20
0 #8
63,50 (2.500)
63,50 (2.500)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
Signal
Contact
5,54(.218) 5,54(.218)
6,91 (.272)
2,84 (.112)
5,54(.218)
2,80 (.110)
2,80 (.110)
Signal
Contact
Mounting Hole
Mounting Hole
8,28 (.326)
6,91 (.272)
6,91 (.272)
6,91 (.272)
9,68 (.381)
9,68 (.381)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
8,28 (.326)
11,05 (.435)
11,05 (.435)
11,05 (.435)
8,28 (.326)
2,84 (.112)
16,56 (.652)
16,56 (.652)
13,82 (.544)
Resource
6,91 (.272)
C
17W5
12 #20
0 #8
16,56 (.652)
Reader’s
8,28 (.326)
6,91 (.272)
9,68 (.381)
270
2,84 (.112)
2,80 (.110)
Mounting Hole
6,91 (.272)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,84 (.112)
11,05 (.435)
8,28 (.326)
5,54(.218)
9,68 (.381)
9,68 (.381)
12,42 (.489)
12,42 (.489)
12,42 (.489)
15,19 (.598)
15,19 (.598)
15,19 (.598)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Signal Contact X
0,60 (.024)
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European
Straight PC Tails — Receptacle
61,12 (2.406)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
4,14 (.163)
61,12 (2.406)
Mounting
Hole
2,80 (.110)
Mounting
Hole
2,84 (.112)
2,84 (.112)
Signal Contact
Signal Contact
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
8,28 (.326)
8,28 (.326)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
19,33 (.761)
22,10 (.870)
22,10 (.870)
22,10 (.870)
16,56 (.652)
19,33 (.761)
19,33 (.761)
19,33 (.761)
13,82 (.544)
16,56 (.652)
16,56 (.652)
16,56 (.652)
11,05 (.435)
13,82 (.544)
13,82 (.544)
13,82 (.544)
8,28 (.326)
11,05 (.435)
11,05 (.435)
11,05 (.435)
22,10 (.870)
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
61,12 (2.406)
61,12 (2.406)
20,70 (.815)
20,70 (.815)
17,96 (.707)
17,96 (.707)
15,19 (.598)
9,68 (.381)
12,42 (.489)
12,42 (.489)
9,68 (.381)
6,91 (.272)
15,19 (.598)
15,19 (.598)
12,42 (.489)
9,68 (.381)
6,91 (.272)
8,28 (.326)
Mounting
Hole
9,68 (.381)
6,91 (.272)
6,91 (.272)
8,28 (.326)
Mounting
Hole
2,80 (.110)
2,84 (.112)
2,80 (.110)
Signal Contact
2,84 (.112)
2,84 (.112)
2,84 (.112)
5,54(.218)
5,54(.218)
5,54(.218) 5,54(.218)
8,28 (.326)
11,05 (.435)
8,28 (.326)
11,05 (.435)
11,05 (.435)
13,82 (.544)
13,82 (.544)
13,82 (.544)
16,56 (.652)
22,10 (.870)
22,10 (.870)
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Signal Contact X
0,60 (.024)
Reader’s
19,33 (.761)
19,33 (.761)
22,10 (.870)
22,10 (.870)
11,05 (.435)
16,56 (.652)
19,33 (.761)
19,33 (.761)
8,28 (.326)
13,82 (.544)
16,56 (.652)
16,56 (.652)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218) 5,54(.218)
8,28 (.326)
Dimensions are shown in mm (inch)
Dimensions subject to change
271
PCB Hole Pattern — Standard
90° — Plug & Receptacle
63,50 (2.500)
24,84 (.978)
24,84 (.978)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
25,00 (.984)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Signal
Contact
5,49
(.216)
5,49
(.216)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
Mounting
Hole
5,49(.216)
11,05 (.435)
Mounting
Hole
5,54(.218)
2,84 (.112)
8,64 (.340)
2,74 (.108)
2,84 (.112)
7,19 (.283)
2,80 (.110)
8,64 (.340)
8,23 (.324)
REAR FLANGE REF
7,19 (.283)
8,28 (.326)
REAR FLANGE REF
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
9 Contacts
12,42 (.489)
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
17,96 (.707)
17,96 (.707)
20.70 (.815)
20,70 (.815)
23,47 (.924)
23,47 (.924)
37 Contacts
33,32 (1.312)
9,60 (.378)
6,86
(.270)
Signal
Contact
9,60 (.378)
6,86
(.270)
8,23 (.324)
Mounting
Hole
2,74 (.108)
2,54 (.100)
8,64 (.340)
5,49
(.216)
5,49
(.216)
7,19 (.283)
5,49
(.216)
REAR FLANGE REF 8,23 (.324) 8,23 (.324)
REAR FLANGE REF
15 Contacts
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Reader’s
Resource
Signal
Contact
272
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
2,84 (.112)
2,80 (.110)
8,64 (.340)
7,19 (.283)
8,28 (.326)
REAR FLANGE REF
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
12,42 (.489)
15,19 (.598)
25 Contacts
50 Contacts
Signal Contact X
0,76 (.030)
1,00 (.040)
Recommended PCB Hole X
1,14 (.045)
1,40 (.055)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European
90° — Plug & Receptacle
63,50 (2.500)
24,84 (.978)
24,84 (.978)
22,10 (.870)
22,10 (.870)
19,33 (.761)
19,33 (.761)
16,56 (.652)
16,56 (.652)
25,00 (.984)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Signal
Contact
5,49
(.216)
5,49
(.216)
8,28 (.326)
5,54(.218) 5,54(.218)
Signal
Contact
Mounting
Hole
5,49(.216)
11,05 (.435)
Mounting
Hole
5,54(.218)
2,54 (.100)
2,74 (.108)
10,90 (.429)
2,54 (.100)
9,40 (.370)
2,80 (.110)
8,23 (.324)
10,90 (.429)
REAR FLANGE REF
9,40 (.370)
8,28 (.326)
REAR FLANGE REF
6,91 (.272)
REAR FLANGE REF
9,68 (.381)
9 Contacts
12,42 (.489)
6,91 (.272)
12,42 (.489)
15,19 (.598)
15,19 (.598)
17,96 (.707)
17,96 (.707)
20.70 (.815)
20,70 (.815)
23,47 (.924)
9,60 (.378)
6,86
(.270)
Signal
Contact
23,47 (.924)
37 Contacts
33,32 (1.312)
9,60 (.378)
REAR FLANGE REF
9,68 (.381)
6,86
(.270)
8,23 (.324)
Mounting
Hole
2,74 (.108)
2,54 (.100)
10,90 (.429)
5,49
(.216)
5,49
(.216)
9,40 (.370)
5,49
(.216)
REAR FLANGE REF 8,23 (.324) 8,23 (.324)
REAR FLANGE REF
15 Contacts
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Signal
Contact
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
Mounting
Hole
5,54(.218)
2,54 (.100)
Reader’s
2,80 (.110)
6,91 (.272)
REAR FLANGE REF
9,40 (.370)
8,28 (.326)
10,70 (.421)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
12,42 (.489)
15,19 (.598)
15,19 (.598)
25 Contacts
50 Contacts
Recommended PCB Hole X
1,00 (.039)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Resource
Signal Contact X
0,60 (.024)
Dimensions are shown in mm (inch)
Dimensions subject to change
273
PCB Hole Pattern — Standard/European
Straight — Plug & Receptacle
25,00 (.984)
5,49
(.216)
Signal
Contact
5,49
(.216)
5,49(.216)
2,84 (.112)
2,74 (.108)
Mounting
Hole
8,23 (.324)
9 Contacts
33,32 (1.312)
9,60 (.378)
6,86
(.270)
37 Contacts
9,60 (.378)
6,86
(.270)
8,23 (.324)
Mounting
Hole
2,74 (.108)
2,84 (.112)
5,49
(.216)
Signal
Contact
5,49
(.216)
5,49
(.216)
8,23 (.324) 8,23 (.324)
15 Contacts
47,04 (1.852)
16,56 (.652)
16,56 (.652)
13,82 (.544)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Reader’s
Resource
Signal
Contact
274
11,05 (.435)
8,28 (.326)
5,54(.218) 5,54(.218)
5,54(.218)
2,84 (.112)
Mounting
Hole
2,80 (.110)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
15,19 (.598)
25 Contacts
50 Contacts
Signal Contact X
0,60 (.024)
0,76 (.030)
1,00 (.040)
Recommended PCB Hole X
1,00 (.039)
1,14 (.045)
1,40 (.055)
Mounting Type
Without Boardlock
With Boardlock
Recommended PCB Hole X
3,05 (.120)
3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Lease Tooling
ABT-607 Pneumatic Crimper
ABT-607
The ABT-607 is a pneumatic powered and controlled machine. It is designed for customers with
moderate volume. This machine is designed to semi-automatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor electrical wire. This machine will accomodate size 34 thru
12 AWG wire and is actuated by the use of a foot pedal.
Machine Crimp Rate: 800 per hour
Power Requirements: Pneumatic = 100 psi, 2 cu. ft. per min.
Products: D*A, MDSM, 75 Ohm Crimp Coax
ABT-620 UCCS Semi-Automatic Crimper/Stripper
ABT-620 UCCS
The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic powered, microprocessor controlled
machine. It is designed to semi-automatically strip insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by crimping. The machine will accommodate 34 thru 12
AWG wire. Primary application of the machine is the termination of jacketed cable where the individual
leads cannot be stripped on fully automated equipment. The ABT-620 UCCS operates automatically upon
insertion of a wire or it can be switched over to foot pedal operation as desired.
Machine Strip/Crimp Rate: 1200+ per hour
Power Requirements: Electrical = 115 VAC, 60 Hz, 20 A
Pneumatic = 80 psi, 3 cu. ft. per min.
Products: D*A, MDSM
CBT-646 Vibra-Bowl Crimper
The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+ per hour
Power Requirements: Electrical = 115 VAC, 60 Hz, 5 A
Pneumatic = 85 psi, 2 cu. ft. per min.
Resource
Products: D*MA
Reader’s
CBT-646
Dimensions are shown in mm (inch)
Dimensions subject to change
275
D Subminiature
Glossary of Terms
Glossary of Terms
In every job speciality there are certain words and
phrases used by the ‘‘insiders’’ which after a time
become almost a language unique to that
speciality. D Subminiature technology is a typical
example of that condition.
AWG — American Wire Gauge. A standard for wire
diameters based on the approximate circular mil
area of the wire. As numbers get larger, wire
diameters decrease in size (a size 16 AWG wire
has a larger diameter than a size 22 AWG).
The following pages provide some explanations, in
an attempt to clarify some of the terms that are
commonly used by engineers and sales staff at ITT
Cannon.
The list is not comprehensive, but highlights many
of the expressions commonly used. Should you
have any comments or additions please contact
us. Feedback will be appreciated.
Backshell — (Also known as Endbell) The outer
rear end of the connector which is attached by
means of internal threads or screws. It adapts the
connector to its wire connections in a variety of
ways. Typical backshells might have cable clamps
to secure a wire bundle, ridges for heat shrink
tubing, pipe threads, or shielded termination
mechanisms. Backshells may be straight, 90°, or
45°.
Accelerated Aging — A connector test in which
temperature, voltage, current, or other parameters
are increased beyond the normal operating values
to observe deterioration in a relatively short period
of time.
Bandwidth — The range of frequencies within
which performance falls within specific limits.
Usually the bandwidth is given as an operating
range and the operating specifications apply only
to that bandwidth, unless otherwise stated.
Accessories — Auxiliary devices such as cable
clamps, endbells, gaskets, or any number of
mechanical hardware devices that can be added to
a connector.
Bar — A centimeter-gram-second unit of pressure
(force exerted on a unit of area) equal to 1,000,000
dynes per square centimeter. Formerly known as
microbar. Its symbol is b.
Alloy — A composition of two or more elements,
of which at least one is a metal. In connector
applications it is usually a combination of metals
which is used to create an alloy superior in
performance to any of its individual components.
Base Metal — The metal which the connector or
connector component is made and over which
various platings will be deposited.
Reader’s
Resource
Alternating Current — A flow of electricity which
reaches a maximum in one direction, decreases to
zero, then reverses itself and reaches maximum in
the opposite direction. This cycle is repeated
continuously. The number of such cycles per
second is the frequency. The average value of the
voltage during any cycle is zero. Abbreviated ac.
276
Ambient Temperature — The temperature of the
environment surrounding the connector. Usually
the air. Normally used as the reference when
specifying the OPERATING TEMPERATURE range
of the connector.
Ampere — A unit of electrical current or rate of
flow of electrons. One volt across one ohm of
resistance causes a current of 1 ampere.
Abbreviated Amp or A.
Anodize — A protective, insulating oxide layer
formed on a metal by electrolytic action.
Occasionally used as the outer most layer in
connector plating, anodize is a very tough, nonconductive plating.
Beryllium Copper — An alloy of copper used to
make contacts. It is relatively expensive, but has
superior spring qualities, is resistant to fatigue, and
can operate at higher temperatures than other
materials such as phosphor bronze. It is used
when numerous insertion and extraction cycles
are required.
Body — The main portion of the connector made
of the shell, insulator, and contacts.
Boot — A rear accessory, usually made of a
resilient material, which is used around a
multiconductor cable to add additional insulation,
strength, abrasion resistance, or sealing.
Brass — Metal alloy of copper and zinc used for
contacts. It is low cost, an excellent conductor,
and resists fatigue.
Breakdown — An electrical discharge through a
connector insulator or insulation on a wire. A
catastrophic failure mode.
Breakdown Voltage — The voltage at which an
insulator ruptures.
C — Abbreviation for Centigrade, or more properly
Celsius, since the term Centigrade was officially
abandoned by international agreement in 1948.
See CELSIUS.
Cable Assembly — A cable (or bundle of cables)
with plugs and/or receptacles on each end.
Cable Clamp — A rear connector clamping
accessory which tightens over a cable or wire
bundle to provide strain relief to the cable. The
cable clamp may be part of a more elaborate
endbell or it may be used alone. Some cable
clamps also provide cable jacket sealing using a
resilient gland; for example the MS3057-C, others
provide only strain relief.
Cadmium — A metallic element chemically
related to zinc and mercury, widely used for
plating. It has an extraordinary ability to resist
outdoor corrosion. It is especially resistant to
alkali. Cadmium is electrically conductive and it is
easy to solder. Its symbol is Cd.
CECC — Abbreviation for Electronic Components
Committee of CENELEC, the European committee
for Electrotechnical Standardization. CECC uses
the IEC test methods, and thus is based upon
worldwide standards.
Celsius — A temperature scale in which the
freezing point of water is 0° and the boiling point is
100° at normal atmospheric pressure. Formerly
known as Centigrade, but officially changed to
Celsius by international agreement in 1948.
CEN — Abbreviation for European Committee for
Standardization. A European standards group
corresponding to the ISO at the European level.
CENELEC — Abbreviation for European
Committee for Electrical Standardization. A
European standards group corresponding to the
IEC at the European level.
Chamfer — A bevel cut on the inside edge of an
insulator contact cavity or a mounting hole. In a
contact cavity the chamfer is intended to guide the
mating pin into the cavity. In a mounting hole it is a
countersink to accept a cone shaped bolt.
Characteristic Impedance — The characteristic
impedance of a transmission line is the impedance
of the line when it is terminated in a perfect load (a
load that absorbs all the energy and reflects none,
such that VSWR = 1.00).
Clearance Hole — See Through Hole.
Attenuation — Power loss in an electrical system,
expressed in decibels.
Breakout — The point at which wires are
separated from a multi-conductor cable or wire
bundle for routing to other points.
Closed Entry — An insulator design which limits
the diameter of the mating contacts.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Glossary of Terms
Glossary of Terms
Coaxial Cable — A cable that comprises a single
copper wire surrounded by insulating material,
wire shielding or mesh, and a plastic protective
sheath.
Contact Size — This usually relates to the
maximum size wire this contact can nominally
accommodate. It is based on that AWG size most
closely corresponds to the circular mil area of the
engaging end of a pin contact for that size. For
example, a size 16 contact can accomodate a size
16 AWG wire maximum and the pin corresponds to
the CMA of a size 16 AWG. Note, however, that
oversized crimp pots are available for some crimp
contacts which will allow, for example, a size 16
contact to accommodate a size 14 AWG wire.
Component — An essential functional part of the
connector.
Contact Spacing — The distance between the
centers of adjacent contacts.
Contact — The conductive element in a connector
which makes the actual connection between the
wire and the mating connector for the purpose of
transferring electrical energy. Ideally the contact
should add nothing to the circuit. In the real world,
however, contacts typically have a small
CONTACT RESISTANCE and associated potential
drop.
Creepage — The conduction of electricity across
the surface of an insulator.
Closed Socket Contact — A socket contact in
which the mating cavity limits the entry of a contact
or probe having a diameter larger than the mating
pin.
Coax — Abbreviation for coaxial.
Contact Alignment — The overall play that a
contact has in the insulator cavity to allow the
mating contacts to self align. Also called contact
float.
Creepage Distance — The shortest distance
between contacts of opposite polarities, or
between a live contact and ground, measured over
the surface of the insulator.
Creepage Path — A path across the surface of the
insulator between two conductors. Lengthening
the path reduces the possibility of arc damage.
Crimp — A method of attaching a contact to a wire
through the application of pressure.
Contact Arrangement — See LAYOUT.
Contact Cavity — A defined hole in the connector
insulator into which the contacts fit. The cavities
are generally marked with a unique designation or
number for ease of identification.
Contact Retention — The maximum allowable
axial load which can be applied to a contact from
either direction without it being dislodged from the
insulator. Usually stated in Newtons or pounds of
force.
CSA — Abbreviation for Canadian Standards
Association.
Current — The movement of electrons through a
conductor. Current is measured in amperes. Its
symbol is L.
Current Rating — The maximum current that a
particular wire, contact, or connector can
accommodate. NOTE: When several wires are
used in a single connector or elevated temperature
or altitude is involved, derating curves must be
applied to these ratings. A typical derating system
is MIL-W-5088 which allows the user to calculate
the derating effects of current, ambient
temperature, number of wires in the bundle, and
altitude.
Derating Curve — A graph of the change in power
handling capability of a connector as a function of
ambient temperature or altitude. Typically the
graphed function is curved, hence the name.
Diallyl Phthalate — A thermosetting plastic used
for insulators and some types of connector
housings. It has outstanding resistance to
chemicals, excellent dimensional stability, and
superior electrical insulating properties.
Dielectric — An insulator used to isolate two
conductors having a low loss factor (RF cables).
The perfect insulator is a vacuum.
Dielectric Constant — That property (K) of an
insulating material which is the ratio of the parallel
capacitance (C) of a given configuration of
electrodes with the material as the dielectric, to the
capacitance of the same electrode configuration
with a vacuum as the dielectric.
Digital — A signal comprising discrete elements.
DIN — Abbreviation for Deutsche Industrie Norm,
a German standards organization.
Direct Current — An essentially constant value of
current that flows in only one direction.
Abbreviated dc.
Dust Cap — A cover used in place of a mating
connector to seal it against dirt and moisture.
Usually secured to the connector by a captive
chain, wire, or rope.
Electroplating — To deposit a metal on the
surface of a conductor using electrolysis.
EMI/RFI — Electro-Magnetic Interference and
Radio Frequency Interference. This is unwanted
stray electronic radiation which may enter, and/or
be emitted by an electronic system. The most
common method of shielding interconnections
against this radiation is to use wires with a metallic
braided shield and a connector system which will
extend the shield through the interconnection. This
type of design will keep radiation from entering, or
being emitted by the system. Backshells for
shielded cable and connectors with threads or
grounding fingers are typically used for this
purpose. Call for the specific EMI/RFI
accommodations of the connectors in this catalog.
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Contact Separation Force — The force required
to separate a pair of mated contacts. Usually
stated in Newtons or pounds of force.
Crosstalk — Undesired electrical currents in
conductors caused by electromagnetic or
electrostatic coupling from other conductors or
from external sources. Also, leakage of optical
power from one optical conductor to another.
Derating — To reduce the voltage, current, or
power rating of a connector to improve its
reliability or to permit operation at high ambient
temperatures or altitudes.
Reader’s
Contact Resistance — The maximum amount of
resistance which a contact introduces into the
connection when carrying a specified current
(usually stated in milliohms). When not stated,
values are typically given for ‘‘Initial’’ or ‘‘new’’
contacts. Most specifications also limit the
maximum resistance during or after each of a
series of extreme tests, such as ‘‘Contact
Resistance After Corrosion Test’’. These figures
are typically slightly higher than ‘‘Initial’’.
Crimp Contact — A contact which is terminated to
a wire by means of crimping with an appropriate
die and tool. After termination, an insertion tool is
normally used to insert the crimped contact into
the connector. Removable crimp contacts can be
FRONT RELEASE or REAR RELEASE. An
extraction tool is usually required to remove the
contact.
Decibel — A standard unit of measure for
transmission gain or loss. It expresses the ratio of
power input to power output. Abbreviated dB. The
term dBm is used when 1 milliwatt is the reference
level.
277
D Subminiature
Glossary of Terms
Glossary of Terms
EN — Abbreviation for Euro Norm. A European
market-wide product standard.
Front Mounting — A receptacle that can only be
mounted to the front of a panel with its mounting
FLANGE outside the equipment.
Endbell — See BACKSHELL.
Extraction Tool — A device used to remove a
(removable) contact from a connector insulator.
The extraction tool may be inserted into the mating
face of the insulator (FRONT RELEASE) or the wire
side (REAR RELEASE). In either case, the contact
comes out the rear, or wire side, of the connector.
Fahrenheit — A temperature scale in which the
freezing point of water is defined as 32° and the
boiling point is 212° at normal atmospheric
pressure. See the conversion tables for converting
Fahrenheit to Celsius. Abbreviated F.
Front Release — For crimp type removable
contacts, front release means that the appropriate
extraction tool is inserted from the front, or mating
face, of the connector. The contact is then pushed
out the rear (wire side) of the connector.
Insert — See INSULATOR.
Gas Tight — The mating of two contact surfaces
which are so tight that corrosive gasses can not
enter the joint.
Insert Arrangement — See LAYOUT.
Gold — A precious metal that is more conductive
than silver or copper. Because it does not corrode
and is highly conductive, it is used as plating for
contacts. Its chemical symbol is Au.
Insert Retention Force — The maximum
allowable force which should be applied to the face
of the insulator without dislodging it from the shell
or causing any change in connector performance
specifications. Usually stated in Newtons or
pounds of force.
Female Contact — See SOCKET CONTACT.
Ferrule — A bell shaped ring which is placed over
a WIRE SEALING GROMMET to provide uniform
axial compression of the grommet and to minimize
the transmission of torque to the grommet when
the backshell is screwed on to the rear of the
connector. Ferrules are a part of the sealing
mechanism at the rear of a connector. Ferrules are
normally a separate component part of the
connector although some backshells have
integrated ferrules. Ferrules are usually made from
a thermoplastic material, but occasionally ferrules
are made of metal.
Reader’s
Resource
Finish — The metalic coatings used on contacts
and metal connectors. These are thin layers of
metal designed to improve conductivity,
solderability, or to resist corrosion. Typical contact
finishes are gold or silver. Typical shell finishes are
olive drab over cadmium, electroless nickel, or
black anodize.
278
Flange — A square mounting flange with four
mounting holes for bolting the connector to a
panel. The mounting holes may be through holes
or threaded.
Flanged Receptacle — (Also known as a Box
Mount or Wall Mount) The shell of this connector
has a square flange with mounting holes at each
corner. Mounting holes are usually through holes,
but may be threaded. Flanged receptacles can
usually be front or rear panel mounted depending
upon panel thickness. Some connectors have two
different versions, one for front mounting, and one
for rear panel mounting.
Flash Plating — As commonly used in connector
terminology, flash refers to extremely thin platings
of metal, for example: gold flash is a very thin
plating of gold. So thin, that the thickness is
generally not specified.
Initial — A test result taken prior to any other
environmental testing. For example, contact
resistance is frequently specified ‘‘Initial’’, that is,
with ‘‘new’’ contacts. Most specifications also
limit the maximum resistance during or after each
of a series of extreme tests, such as ‘‘Contact
Resistance After Corrosion Test’’. These figures
are typically slightly higher than ‘‘Initial’’.
Grommet Cavity — A defined hole in the WIRE
SEALING GROMMET through which the wires are
passed. The cavities are generally marked with a
unique designation or number for ease of use.
Guide Pin — A special pin which is inserted into a
socket contact before the contact can be inserted
into the connector insulator. Guide pins provide a
rounded surface at the front of the socket and
greatly aid in pushing the contact into the insulator
thus avoiding damage to both the insulator and the
contact. Typically, small size socket contacts
require the use of guide pins while larger sizes can
be inserted without them.
Harness — A group of wires or cables bundled
together with attached connectors and/or
components in a preshaped assembly.
Hz — Symbol for Hertz, an international unit of
frequency equal to one cycle per second. That is,
20,000 Hz is 20,000 cycles per second.
I/O — Input/Output
IEC — Abbreviation for the International
Electrotechnical Commission. An international
organization that develops standards exclusively
for electrical engineering. CENELEC is the
equivalent organization at the European level.
Impedance Match — When a transmission line is
terminated so that VSWR = 1.00. Another
definition is when a source is terminated in an
impedance that allows optimum energy transfer.
Indentor — The part of a crimping die which
indents the contact barrel to form the actual crimp.
Indentors normally make six or eight multiple
indentions for each crimp.
Insertion Force — The effort, usually stated in
ounces or Newtons, required to engage two
contacts or connector halves.
Insertion Loss — The attenuation that results
when a transducer is inserted in a transmission
line. It is the ratio of the power input to the
transducer to the power out of the transducer
expressed in decibels.
Insertion Tool — A small, hand-held tool used to
insert contacts into a connector.
Insulation — A material that has high electrical
resistance and is suitable for covering or encasing
electrical components to prevent a short circuit.
Insulation Displacement Connector (IDC) — A
connector contact with sharp tines which pierce
and displace the wire insulation and make direct
electrical connection with the conductor. Normally
used with multipin connectors which must be
terminated to flat cable. This is a fast, low cost
method to terminate many conductors
simultaneously.
Insulation Resistance — The minimum
resistance (usually stated in Megohms) between
adjacent contacts and between the contacts and
the shell at a specific voltage. When not stated,
values are typically given for new insulators. Most
specifications also specify minimum resistance
figures during or after each of a series of extreme
tests, such as ‘‘Insulation Resistance During Dry
Heat’’.
Insulation Support — An extended portion at the
rear of a crimp contact that is crimped around the
wire insulation to provide extra strain relief. This
crimp is in addition to the crimp over the conductor
which provides the actual electrical termination.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Glossary of Terms
Glossary of Terms
Insulator — The insulating element into which the
contacts are mounted in a connector. This can be a
resilient material, thermoplastic, or a thermoset
compound, among other materials.
Insulator Rotation — A method of differentiating a
circular connector if more than one connector with
the same sex and layout is to be used in a system.
The insulator is permanently positioned in the shell
so that only a connector with the same degree of
rotation can be mated with it. Possible rotations are
specific to each layout with some layouts having
many possible rotations and others having none. A
chart of valid rotations is listed by layout for
connectors capable of being rotated. Most
connector series use the military convention of
assigning letter designations for specific degrees
of rotation (for example: W, X, Y, Z). See KEYING.
Interchangeable — The characteristic of
connectors in which a connector half of one
manufacturer or series will directly replace that of
another manufacturer and provide the same
electrical and mechanical function.
Keying — A method of differentiating a connector
if more than one connector with the same sex and
layout is to be used in a system. The key is usually
a pin or other projection which can be located in a
contact cavity or slot. The key will prevent a
connector without a matching orifice from mating.
Keying and POLARIZATION serve the same
function, but keying can be done by the user, while
polarization is manufactured into the connector
and normally can not be altered by the user.
Layout — The number, size, and geometric
arrangement of the contacts in a connector. When
a connector is said to have a certain ‘‘layout’’ it
refers to a specific contact configuration. For
example, Combo D has 2 pages of drawings
showing the arrangement of the contacts in the
insulator. Each of these contact cavity
arrangements can be referred to as a layout.
Locator — A part of a crimping tool TURRET.
Rotation of the locator sets the tool for a particular
size or sex contact. See TURRET.
Male Contact — See PIN CONTACT.
Intermateable — The characteristic of connectors
in which a connector half of one manufacturer or
series will mate directly with the connector half of
another manufacturer.
Intermittent — Occurring at intervals. A
connection which passes electrical current only in
random or undesirable intervals.
Intermountable — The characteristic of
connectors in which one manufacturer’s
connector or series will mount in exactly the same
panel space and mounting holes as another
manufacturer’s product.
Jacket — The outermost layer of insulation in a
cable composed of several wires.
Jackscrew — A screw attached to one half of a
connector pair used to mechanically align, draw
them together, and lock them in place.
Mil-Spec —
Specification.
Abbreviation
for
Military
Ohm — The unit of electrical resistance. One ohm
is the value of resistance through which a potential
difference of one volt will maintain a current of one
ampere. Its symbol is the Greek letter omega (ȉ).
Operating Temperature — The range of
AMBIENT TEMPERATURES over which the
connector can operate and still meet all of its
design specifications.
Operating Voltage — The range of voltages over
which the connector can be operated. Safety
precautions must be taken anytime a voltage in
excess of 50V is to be used in a circuit. Check your
local and national codes for guidelines.
Outgassing — The circumstance in which an
insulator releases gasses trapped within it under a
vacuum or conditions of decreased pressure, high
heat, or both.
Panel — The outside surface of a piece of
equipment on to which connectors are mounted.
The panel is usually made of metal.
Panel Mount — A connector designed to be
mounted on a panel by means of screws or jam
nut.
PCB — Abbreviation for Printed Circuit Boards.
Milliampere — One one-thousandth (.001) of an
ampere. Abbreviated mA.
Millimeter — Metric unit of linear measure.
1 millimeter = .03937 inches. Abbreviated mm.
Milliohm — One one-thousandth (.001) of an
ohm. Abbreviated mȉ.
mm2 — Millimeters squared. A standard for wire
diameters used in Europe instead of AWG. As
numbers get larger, wire diameters increase in
size. The relationship between mm2 and AWG is
reverse logarithmic. 1 mm2 = 1973 circular mils. A
conversion graph is needed to make accurate
comparisons between AWG and mm2. Call for
assistance.
Mounting Clip — Any of a variety of mounting
accessories used to secure a connector or
connector pair to a rigid surface.
Performance Class 1 — Performance class per
European specification DIN 41652, specifying
contact performance to 500 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
500 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
Performance Class 2 — Performance class per
European specification DIN 41652, specifying
contact performance to 200 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
200 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
Multi-Conductor Cable — Two or more individual
wires surrounded by a jacketing material.
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Key — A mechanism used to polarize connectors
by the user. See KEYING.
Mil — One thousandth of an inch (.001). Used in
the United States as a unit of length in wire
diameters and linear dimensions.
Newton — A unit of acceleration. One Newton is
the force capable of accelerating 1 kilogram to one
meter per second per second. 1 pound force =
4.448221 Newtons. Abbreviated N.
Reader’s
ISO — Abbreviation for the International Standards
Organization. A group that operates at the
international level and sets most standards for
industry, with the exception of electrical
engineering and telecommunications which are set
by the IEC and ITU respectively. CEN is the
equivalent organization at the European level.
Mating Life — The minimum number of times a
connector can be mated and unmated and still
meet all of its design specifications. The maximum
life may be much higher than this figure.
Nest — The portion of a crimping die that supports
the contact barrel during crimping.
279
D Subminiature
Glossary of Terms
Glossary of Terms
Performance Class 3 — Performance class per
European specification DIN 41652, specifying
contact performance to 50 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
50 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
Peripheral Seal — A resilient seal used to keep
moisture from entering the connector at the point
where the plug and receptacle shells meet. A
common method is to use flat gaskets on
receptacles and O-rings on plugs.
Phosphor Bronze — An alloy of copper, tin, and
phosphorus used to make spring contacts. It is
typically used in lower cost contacts where
frequent insertions and withdrawals and high
temperatures are not a factor.
Pin — A male contact. See PIN CONTACT.
Pin Contact — The contact which has a long shaft
at the engagement end which enters the socket
contact.
Plating — See FINISH.
Reader’s
Resource
Plug — The male portion of a connector pair
usually employing a coupling nut to secure it to the
receptacle half. A plug may have either pin or
socket contacts.
280
Polarization — A mechanical mechanism that
allows connector halves to intermate in only one
specific orientation. This can be accomplished by
asymmetrical shapes of the two halves as in a D
Subminiature connector, insulator rotation, keys,
keyways, ramps, or other means. Polarization
prevents connectors of the same size and/or same
layout from intermating when this is undesirable,
such as when two otherwise identical connectors
are used on the same panel. Polarization is
typically done by the assembler and can not be
changed by the user, while keying is typically done
by the user with an auxiliary keying device.
Polarizing Pin — A mechanism used to polarize
connectors, manufactured into the connector. See
KEYING.
Potting — The permanent sealing of a cable to a
connector using an insulating material such as
potting compound to exclude moisture or provide
strain relief. See POTTING CUP.
Potting Compound — A sealing material used in
potting to fill a potting cup.
Potting Cup — A bell-shaped (plastic) backshell
with an enlarged opening for the wires. After the
connector is loaded with wired contacts, the
potting cup is attached to the rear of the connector.
The inside of the cup is then filled with a potting
compound. When the compound hardens, it forms
a solid, permanent, watertight mass around the
wires.
Potting Ring — A portion of the POTTING CUP
which secures the bell shaped cup to the rear of the
connector, usually by means of internal threads.
Pre-Tin — To apply tin-lead solder to the contact
solder cup and/or conductor prior to soldering the
two together.
Rear Mounting — A receptacle that mounts
through the panel from the rear, with its mounting
flange inside the equipment. Typically, rear mount
receptacles are slightly longer than front mount
types to allow for the thickness of the panel. Flange
mount receptacles usually come in front and rear
mount versions. All Jam nut receptacles are rear
mount.
Rear Release — For crimp type removable
contacts, rear release means that the appropriate
extraction tool is inserted from the rear, or wire
side, of the connector. The contact is then pulled
out the rear of the connector.
Receptacle — The connector half that mates with
the plug. The receptacle has threads, pins or
ramps which engage the coupling nut on the plug,
locking the two halves together. A receptacle may
have either pin or socket contacts.
REF — Abbreviation for Reference.
Removable Contact — A contact which can be
inserted and removed from the insulator by the
user. An insertion tool and extraction tool are
normally required to insert and remove the contact.
Salt Spray Test — A test, or series of tests, in
which mated and/or unmated connectors are
subjected to salt water under specified conditions.
Used to test the connector’s resistance to corrosion
and any associated degradation in electrical
function.
Screw Machine Contact — A contact made from a
solid bar or rod using screw machine operations.
Some screw machine contacts include secondary
elements which are welded, crimped, or formed
around the basic screw machined part to complete
the contact.
Selective Plating — The application of metal
PLATING to selective areas of the contact,
particularly those areas subject to wear. Precious
metal platings may be applied selectively to those
contact surfaces responsible for the electrical
connection, reducing the contact cost without
sacrificing electrical performance.
Shell — The outside case of a connector into which
the insulator and contacts are situated.
Shell Size — A standard system developed for
military circular connectors for indicating the
diameter of the shell. The system is based upon 1⁄16⍯
increments, that is, a size 16 shell is one inch in
diameter.
Shield Effectiveness — The ability of a shield to
screen out undesirable signals.
Shock — An abrupt impact applied to a stationary
object. It is usually expressed in gravities (g).
Socket — A female contact. See SOCKET
CONTACT.
Socket Contact — The contact which has an
opening at the engagement end to accept the pin
contact.
Resistance — That property of a substance which
impedes current and results in the dissipation of
power in the form of heat. The unit of resistance is
the ohm.
Solder Contact — A contact which is terminated to
the wire with solder. Solder contacts are normally
bonded into the insulator and can not be removed
by the user. The alternative is crimp contacts to
which a wire is attached by crimping. Crimp
contacts can usually be inserted and removed by
the user.
Return Loss — The ratio of the power reflected
from a discontinuity in a transmission line to the
power incident.
Solder Cup — The end of a SOLDER CONTACT is
designed to accept a wire which will then be
soldered to the contact.
RFI — See EMI/RFI.
Stamped and Formed Contact — Contacts made
by stamping and forming a sheet of metal rather
than by machining metal stock. Also see SCREW
MACHINE CONTACTS.
Removal Tool — See EXTRACTION TOOL
Root Mean Square — The square root, of the
average of the squares, of the values of a periodic
quantity (like alternating current), taken through
one complete period. It is the effective quantity of a
periodic quantity. Abbreviated rms.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Glossary of Terms
Glossary of Terms
Star Clip — One of several designs used for screw
machine socket contacts. A tiny plated star shaped
clip is captivated inside a solid barrel into which the
pin contact fits. The clip creates a multi-point area
of mechanical and electrical continuity between
the mated contacts.
Stripper — A tool to remove insulation from a
wire.
UL — Abbreviation for Underwriter’s
Laboratories, a corporation supported by a group
of underwriters for the purpose of establishing
safety standards covering certain types of
equipment and components in the United States.
UL 94V-O — A flammability performance rating
set by Underwriter’s Laboratories for plastics.
V — Symbol for volt.
Test Voltage — The range of voltages over which
the connector has been tested per the perimeters
in the applicable specification.
Vac — Volts, alternating current.
Vdc — Volts, direct current.
Thermoplastic — A plastic material that can be
softened by heat and rehardened into a solid state
by cooling. This process can be accomplished
using a variety of techniques.
Thermoset — A plastic material which hardens
when heat and pressure are applied. Unlike
thermoplastic, it cannot be remelted or remolded.
Through Hole — (Also known as a clearance hole)
A mounting hole without threads.
Turret — An interchangeable device which is
attached to a CRIMP TOOL that allows the tool to
crimp a range of contacts. Each turret is made to
crimp a specific style contact or a range of
contacts and/or wire gauges. See LOCATOR.
Vibration — A continuously reversing change in
the magnitude of a given force.
Volt — The unit of measurement of electromotive
force. It is equivalent to the force required to
produce a current of 1 ampere through a
resistance of one ohm.
Voltage — The force which causes current to flow
through an electrical conductor. Its symbol is E.
The greatest effective difference in potential
between and two conductors of a circuit.
Voltage Drop — The difference in voltage
between two points in a circuit due to the loss of
electrical pressure as a current flows through an
impedance.
Voltage Rating — The maximum voltage which a
connector can sustain without breaking down or
varying from design specifications.
Voltage Standing Wave Ratio — If a signal is sent
down a transmission line any discontinuity will
send a reflection back in the opposite direction.
Wire Sealing Grommet — A resilient disc with
holes in it to accommodate the individual wires
entering the rear of the connector. Each cavity
forms a tight seal against the wire insulation (as
long as wires within the specified diameter are
used). The grommet seals the back of the
connector against moisture, dirt, and air. The
grommet is normally held in place and
compressed by a backshell and/or ferrule. It is
usually a separate component, but may be part of
the insulator itself. Also see GROMMET CAVITY.
Wire Size — A numerical designation for
conductor diameter. This catalog uses American
Wire Gauge (AWG) which is based on the
approximate circular mil area of the wire. See AWG
and mm2.
Wrap Post Contact — A type of contact which is
terminated by wrapping wire around a post in a
manner that deforms the wire and creates a gastight connection between the wire and the post.
This method is slow and labor intensive. If used at
all, it is used in prototype work.
Reader’s
Resource
Dimensions are shown in mm (inch)
Dimensions subject to change
281
D Subminiature
Reader’s Resource
Obsolete Products
General Application Connectorsɍ
D*C
Burgun D with snap-in, rear
release machined or stamped
crimp contacts. Refer to D*U
products.
D*P
90° connectors for I/O
applications, UL 94V-0 rated.
Refer to D*U products
D*PF
Straight and 90° PCB applications,
UL 94V-0 rated. Refer to D*
products.
AD*
Part number change only.
Refer to ZD* products.
D*11148
D*(SMT)
SMT – Surface Mount D,
no replacement, only through
holes available. Refer to ZED*
products.
D*P1
Machined pressfit replaced by
stamped pressfit. Refer to D*NG
products.
D*TC
Part number change only.
Refer to D* products.
Available Products Not Listed Within This Publication
General Application Connectorsɍ
Special Application Connectorsɍɍ
D*U
Burgun D with snap-in, rear
release machined or stamped
crimp contacts, UL 94V-0 rated.
D*MA
Military specification quality
removable crimp style contacts for
high performance applications.
GD*
Grommet D environmentally
sealed, crimp, snap-in, rear
release contacts.
D*SF
Speedy D for IDC ribbon cable, UL
94V-0 rated, accomodates Sizes
28-26 AWG cable on 1,27 (.050)
conductor spacing.
ZD*A
Low cost, stamped contacts, high
density 90° PCB connectors.
D*D
Environmentally sealed, cast
aluminium shell. Product not
intermatable with M24308 type
D Subminiature connectors.
ɍ Commercial Applications Only
ɍɍ Military or Commercial Applications
Reader’s
Resource
Consult factory for details.
282
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DA15P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DA15P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DA15P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DA15P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DA15P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12
DA15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DA15S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11
DA15S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . . 27
DA15S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . . 27
DA15S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DA15S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DA15S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DA15S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25
DA15S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . . 23
DA15S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . . 25
DA15S-1AON-A197 . . . . . . . . . . . . . . . . . . . . . 21
DA15S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . . 27
DA15S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27
DA15S-1AVN-A197. . . . . . . . . . . . . . . . . . . . . 25
DA15S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25
DA15S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13
DA15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DA19678-1 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DA19678-157 . . . . . . . . . . . . . . . . . . . . . . . . 195
DA19678-167 . . . . . . . . . . . . . . . . . . . . 193, 195
DA19678-174 . . . . . . . . . . . . . . . . . . . . . . . . 195
DA19977-1 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DA19977-40 . . . . . . . . . . . . . . . . . . . . . 193, 195
DA20961 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DA20961-16 . . . . . . . . . . . . . . . . . . . . . . . . . 192
DA22213 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
DA22214 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
DA24658 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DA24658-15 . . . . . . . . . . . . . . . . . . . . . 192, 195
DA50905-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DA51210 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DA51211 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DA51220-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210
DA53750-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DAA11W1PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DAA11W1SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DAA15PK87FO . . . . . . . . . . . . . . . . . . . . . . . . 36
DAA15SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37
DAA3W3PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DAA3W3SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DAA7W2PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DAA7W2SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DABS-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
DABU111512 . . . . . . . . . . . . . . . . . . . . . . . . 216
DAE15P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DAE15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DAE15S-0L2-A197-146 . . . . . . . . . . . . . . . . . . 11
DAE15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DAJK15P*-1A0N . . . . . . . . . . . . . . . . . . . . . . 110
DAJK15P*-1A5N . . . . . . . . . . . . . . . . . . . . . . 118
DAJK15P*-1A6N . . . . . . . . . . . . . . . . . . . . . . 118
DAJK15P*-1A7N . . . . . . . . . . . . . . . . . . . . . . 114
DAJK15P*-1A8N . . . . . . . . . . . . . . . . . . . . . . 114
DAJK15P*-1A9N . . . . . . . . . . . . . . . . . . . . . . 114
DAJK15P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116
DAJK15P*-1AFN . . . . . . . . . . . . . . . . . . . . . . 114
DAJK15P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116
DAJK15P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114
DAJK15P*-1AJN . . . . . . . . . . . . . . . . . . . . . . 116
DAJK15P*-1APN. . . . . . . . . . . . . . . . . . . . . . 118
DAJK15P*-1ATN . . . . . . . . . . . . . . . . . . . . . . 118
DAJK15P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118
DAJK15P*-1AVN . . . . . . . . . . . . . . . . . . . . . . 116
DAJK15P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116
DAJK15P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108
DAJK15P*-1U7N . . . . . . . . . . . . . . . . . . . . . . 112
DAJK15P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112
DAJK15P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DAJK15S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111
DAJK15S*-1A5N . . . . . . . . . . . . . . . . . . . . . . 119
DAJK15S*-1A6N . . . . . . . . . . . . . . . . . . . . . . 119
DAJK15S*-1A7N . . . . . . . . . . . . . . . . . . . . . . 115
DAJK15S*-1A8N . . . . . . . . . . . . . . . . . . . . . . 115
DAJK15S*-1A9N . . . . . . . . . . . . . . . . . . . . . . 115
DAJK15S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117
DAJK15S*-1AFN . . . . . . . . . . . . . . . . . . . . . . 115
DAJK15S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117
DAJK15S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115
Part Number
Page
DAJK15S*-1AJN . . . . . . . . . . . . . . . . . . . . . . 117
DAJK15S*-1APN. . . . . . . . . . . . . . . . . . . . . . 119
DAJK15S*-1ATN . . . . . . . . . . . . . . . . . . . . . . 119
DAJK15S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119
DAJK15S*-1AVN. . . . . . . . . . . . . . . . . . . . . . 117
DAJK15S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117
DAJK15S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109
DAJK15S*-1U7N. . . . . . . . . . . . . . . . . . . . . . 113
DAJK15S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113
DAJK15S*-OL4. . . . . . . . . . . . . . . . . . . . . . . 121
DAJKE15P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110
DAJKE15P*-1U0N . . . . . . . . . . . . . . . . . . . . 108
DAJKE15P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DAJKE15P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DAJKE15S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DAJKE15S*-1U0N . . . . . . . . . . . . . . . . . . . . 109
DAJKE15S*-OL4. . . . . . . . . . . . . . . . . . . . . . 121
DAJKE15S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DAJKX15P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110
DAJKX15P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DAJKX15P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DAJKX15S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DAJKX15S*-OL4. . . . . . . . . . . . . . . . . . . . . . 121
DAJKX15S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DAJT15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DAJT15S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DAJT3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3W3P1-1A0N . . . . . . . . . . . . . . . . . . . . 124
DAJT3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . . 126
DAJT3W3P5 . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3W3P5-1A0N . . . . . . . . . . . . . . . . . . . . 124
DAJT3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . . 126
DAJT3W3P6 . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3W3P6-1A0N . . . . . . . . . . . . . . . . . . . . 124
DAJT3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . . 126
DAJT3W3P9 . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3W3P9-1A0N . . . . . . . . . . . . . . . . . . . . 124
DAJT3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . . 126
DAJT3W3S1. . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3W3S1-1A0N . . . . . . . . . . . . . . . . . . . . 125
DAJT3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . . 127
DAJT3W3S5 . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3W3S5-1AON . . . . . . . . . . . . . . . . . . . . 125
DAJT3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . . 127
DAJT3W3S6 . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3W3S6-1A0N . . . . . . . . . . . . . . . . . . . . 125
DAJT3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . . 127
DAJT3W3S9 . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3W3S9-1A0N . . . . . . . . . . . . . . . . . . . . 125
DAJT3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . . 127
DAJT3WK3P1. . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3WK3P1-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJT3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJT3WK3P5 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3WK3P5-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJT3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJT3WK3P6 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3WK3P6-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJT3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJT3WK3P9 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJT3WK3P9-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJT3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJT3WK3S1. . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3WK3S1-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJT3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJT3WK3S5 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3WK3S5-1AON . . . . . . . . . . . . . . . . . . 125
DAJT3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJT3WK3S6 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3WK3S6-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJT3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJT3WK3S9 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJT3WK3S9-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJT3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTE15P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DAJTE15S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
DAJTE3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3W3P1-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTE3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTE3W3P5 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3W3P5-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTE3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTE3W3P6 . . . . . . . . . . . . . . . . . . . . . . . 128
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
CA111972-12 . . . . . . . . . . . . . . . . . . . . . . . . . 98
CA111972-22 . . . . . . . . . . . . . . . . . . . . . . . . . 98
CA112104 . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
CA112104-1 . . . . . . . . . . . . . . . . . . . . . . . . . 102
CA112104-2 . . . . . . . . . . . . . . . . . . . . . . . . . 102
CA112104-3 . . . . . . . . . . . . . . . . . . . . . . . . . 102
CA112104-4 . . . . . . . . . . . . . . . . . . . . . . . . . 102
CA112104-5 . . . . . . . . . . . . . . . . . . . . . . . . . 102
CCTP-750HM . . . . . . . . . . . . . . . . . . . . . . . . 84
CCTP-DM . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D110277 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
D110278 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
D110279 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
D110280 . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
D110550 . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
D110551. . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
D115418-70 . . . . . . . . . . . . . . . . . . . . . . . . . 195
D115433-1 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82
D115433-2 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82
D115433-3 . . . . . . . . . . . . . . . . . . . . . . . . 40, 82
D121073-19 . . . . . . . . . . . . . . . . . . . . . . . . . 201
D121073-39 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D121073-40 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D121073-41 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D121073-42 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D130322-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130322-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130322-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130344 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130344-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130344-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D130356 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D130356-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D130356-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D130357 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D130357-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D130357-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 85
D20418-101. . . . . . . . . . . . . . . . . . . . . . 194-195
D20418-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 209
D20418-39 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D20418-50 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D20418-52 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20418-70 . . . . . . . . . . . . . . . . . . . . . . . . . . 194
D20418-74 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D20418-80 . . . . . . . . . . . . . . . . . . . . . . . . . 209
D20419 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20419-104 . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20419-18 . . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20419-21. . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20419-48 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20419-73 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20419-74 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20419-84 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20420-13 . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20420-15 . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20420-49 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20420-63 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20420-67 . . . . . . . . . . . . . . . . . . . . . . 194-195
D20420-86 . . . . . . . . . . . . . . . . . . . . . . . . . 208
D20420-88 . . . . . . . . . . . . . . . . . . . . . . 194-195
DA-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DA-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DA111806-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DA111806-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DA111810 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
DA111810-3 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DA115339-1 . . . . . . . . . . . . . . . . . . . . . . . . . 207
DA115339-21 . . . . . . . . . . . . . . . . . . . . . . . . 205
DA115386-104A . . . . . . . . . . . . . . . . . . . . . . 195
DA115386-2B . . . . . . . . . . . . . . . . . . . . . . . 207
DA121073-150 . . . . . . . . . . . . . . . . . . . . . . . 200
DA121073-50 . . . . . . . . . . . . . . . . . . . . . . . 200
DA15P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . . 10
DA15P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DA15P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DA15P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DA15P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DA15P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DA15P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DA15P-1AFN-K87. . . . . . . . . . . . . . . . . . . . . . 22
DA15P-1AJN-K87. . . . . . . . . . . . . . . . . . . . . . 24
DA15P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20
Reader’s
Part Number
Page
015-8755-000 . . . . . . . . . . . . . . . . . . . . . . . 207
015-8755-001 . . . . . . . . . . . . . . . . . . . . . . . 207
030-2042-002 . . . . . . . . . . . . . . . . . . . . . . . 195
030-2487-016 . . . . . . . . . . . . . . . . . . . . . . . . 83
030-2487-017 . . . . . . . . . . . . . . . . . . . . . . . . 83
030-2488-016 . . . . . . . . . . . . . . . . . . . . . . . . 83
030-2488-017 . . . . . . . . . . . . . . . . . . . . . . . . 83
030-8848-020 . . . . . . . . . . . . . . . . . . . 187, 195
030-8882-002 . . . . . . . . . . . . . . . . . . . 187, 195
031-1007-052-05 . . . . . . . . . . . . . . . . . . . . . 195
031-1147-002 . . . . . . . . . . . . . . . . . . . . . . . 195
031-8787-020 . . . . . . . . . . . . . . . . . . . 187, 195
031-8843-001 . . . . . . . . . . . . . . . . . . . 187, 195
031-8902-000 . . . . . . . . . . . . . . . . . . . . . . . 195
031-8902-001 . . . . . . . . . . . . . . . . . . . . . . . 187
031-8944-000 . . . . . . . . . . . . . . . . . . . 187, 195
070051-0000. . . . . . . . . . . . . . . . . . . . . . . . . 89
070064-0002 . . . . . . . . . . . . . . . . . . . . . . . . 88
075-0354-003 . . . . . . . . . . . . . . . . . . . . . . . 218
110238-1012 . . . . . . . . . . . . . . . . . . . . . . . . . 84
110238-1013 . . . . . . . . . . . . . . . . . . . . . . . . . 84
110238-1014 . . . . . . . . . . . . . . . . . . . . . . . . . 84
110238-1015 . . . . . . . . . . . . . . . . . . . . . . . . . 84
248-2967-000 . . . . . . . . . . . . . . . . . . . . . . . . 95
249-2271-000 . . . . . . . . . . . . . . . . . . . . . . . . 84
249-2272-000 . . . . . . . . . . . . . . . . . . . . . . . . 84
250-8501-004 . . . . . . . . . . . . . . . . . . . . . . . 201
250-8501-009 . . . . . . . . . . . . . . . . . . . . . . . 201
250-8501-010 . . . . . . . . . . . . . . . . . . . . . . . 201
250-8501-013 . . . . . . . . . . . . . . . . . . . . . . . 201
259-8760-000 . . . . . . . . . . . . . . . . . . . . . . . 207
274-5016-002 . . . . . . . . . . . . . . . . . . . . . . . 187
274-7003-000 . . . . . . . . . . . . . . . . . . . . . . . 187
274-7048-000 . . . . . . . . . . . . . . . . . . . . . . . 187
304-0444-000 . . . . . . . . . . . . . . . . . . . . . . . . 84
304-8810-000 . . . . . . . . . . . . . . . . . . . . . 40, 82
304-8811-000 . . . . . . . . . . . . . . . . . . . . . 40, 82
304-8812-000 . . . . . . . . . . . . . . . . . . . . . 40, 82
304-8813-000 . . . . . . . . . . . . . . . . . . . . . 40, 82
323-7010-000 . . . . . . . . . . . . . . . . . . . . . . . 187
330-5291-081-02 . . . . . . . . . . . . . . . . . . . . . 195
330-8753-101 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8753-102 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8753-103 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8754-101 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8754-102 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8754-103 . . . . . . . . . . . . . . . . . . . . . . . . 41
330-8782-001 . . . . . . . . . . . . . . . . . . . 187, 195
330-8944-000 . . . . . . . . . . . . . . . . . . . . . . . 195
330-8944-001 . . . . . . . . . . . . . . . . . . . . . . . 187
980-0005-722 . . . . . . . . . . . . . . . . . . . . . . . 187
980-0008-135 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-0008-136 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-345 . . . . . . . . . . . . . . . . . . . . . . . 202
980-2000-346 . . . . . . . . . . . . . . . . . . . . . . . 202
980-2000-347 . . . . . . . . . . . . . . . . . . . . . . . 202
980-2000-348 . . . . . . . . . . . . . . . . . . . . . . . 202
980-2000-349 . . . . . . . . . . . . . . . . . . . . . . . 202
980-2000-426 . . . . . . . . . . . . . . . . . . . . . . . 187
980-2000-858 . . . . . . . . . . . . . . . . . . . . . . . 209
980-2000-859 . . . . . . . . . . . . . . . . . . . . . . . 209
980-2000-860 . . . . . . . . . . . . . . . . . . . . . . . 211
980-2000-923 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-924 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-925 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-926 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-943 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-944 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-945 . . . . . . . . . . . . . . . . . . . . . . . . 83
980-2000-946 . . . . . . . . . . . . . . . . . . . . . . . . 83
995-0001-244 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-325 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-584 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-585 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-604 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-739 . . . . . . . . . . . . . . . . . . . . . . . 187
995-0001-761 . . . . . . . . . . . . . . . . . . . . . . . . 85
995-2000-000 . . . . . . . . . . . . . . . . . . . . . . . . 83
995-2000-092 . . . . . . . . . . . . . . . . . . . . . . . 211
995-2000-094 . . . . . . . . . . . . . . . . . . . . . . . . 84
995-2000-110 . . . . . . . . . . . . . . . . . . . . . . . . 85
ABT-607 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
CA111972-11 . . . . . . . . . . . . . . . . . . . . . . . . . 98
Part Number Index
283
Reader’s
Resource
D Subminiature
284
Part Number
Page
DAJTE3W3P6-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTE3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTE3W3P9 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3W3P9-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTE3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTE3W3S1 . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3W3S1-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTE3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTE3W3S5 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3W3S5-1AON . . . . . . . . . . . . . . . . . . . 125
DAJTE3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTE3W3S6 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3W3S6-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTE3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTE3W3S9 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3W3S9-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTE3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTE3WK3P1. . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3WK3P1-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTE3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTE3WK3P5 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3WK3P5-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTE3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTE3WK3P6 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3WK3P6-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTE3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTE3WK3P9 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTE3WK3P9-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTE3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTE3WK3S1. . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3WK3S1-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTE3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTE3WK3S5 . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3WK3S5-1AON . . . . . . . . . . . . . . . . . 125
DAJTE3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTE3WK3S6 . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3WK3S6-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTE3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTE3WK3S9 . . . . . . . . . . . . . . . . . . . . . . 129
DAJTE3WK3S9-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTE3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTX15P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DAJTX15S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
DAJTX3W3KP1-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTX3W3P1 . . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3W3P1-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTX3W3P1-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTX3W3P5 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3W3P5-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTX3W3P5-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTX3W3P6 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3W3P6-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTX3W3P6-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTX3W3P9 . . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3W3P9-1A0N . . . . . . . . . . . . . . . . . . . 124
DAJTX3W3P9-OL4 . . . . . . . . . . . . . . . . . . . . 126
DAJTX3W3S1 . . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3W3S1-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTX3W3S1-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTX3W3S5 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3W3S5-1AON . . . . . . . . . . . . . . . . . . . 125
DAJTX3W3S5-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTX3W3S6 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3W3S6-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTX3W3S6-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTX3W3S9 . . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3W3S9-1A0N . . . . . . . . . . . . . . . . . . . 125
DAJTX3W3S9-OL4 . . . . . . . . . . . . . . . . . . . . 127
DAJTX3WK3P1. . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3WK3P1-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTX3WK3P5 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3WK3P5-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTX3WK3P5-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTX3WK3P6 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3WK3P6-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTX3WK3P6-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTX3WK3P9 . . . . . . . . . . . . . . . . . . . . . . 128
DAJTX3WK3P9-1A0N . . . . . . . . . . . . . . . . . . 124
DAJTX3WK3P9-OL4 . . . . . . . . . . . . . . . . . . . 126
DAJTX3WK3S1. . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3WK3S1-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTX3WK3S1-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTX3WK3S5 . . . . . . . . . . . . . . . . . . . . . . 129
Part Number Index
Part Number
Page
DAJTX3WK3S5-1AON . . . . . . . . . . . . . . . . . 125
DAJTX3WK3S5-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTX3WK3S6 . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3WK3S6-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTX3WK3S6-OL4 . . . . . . . . . . . . . . . . . . . 127
DAJTX3WK3S9 . . . . . . . . . . . . . . . . . . . . . . 129
DAJTX3WK3S9-1A0N . . . . . . . . . . . . . . . . . . 125
DAJTX3WK3S9-OL4 . . . . . . . . . . . . . . . . . . . 127
DAM-11W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DAM-11W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DAM-11W1P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DAM-11W1P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DAM-11W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-11W1P-NMC-77 . . . . . . . . . . . . . . . . . . 195
DAM-11W1P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DAM-11W1P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DAM-11W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DAM-11W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DAM-11W1S-NMB-76 . . . . . . . . . . . . . . . . . . 195
DAM-11W1S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DAM-11W1S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-11W1S-NMC-77 . . . . . . . . . . . . . . . . . . 195
DAM-11W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DAM-11W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DAM-15S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195
DAM-15S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195
DAM-3W3P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DAM-3W3P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DAM-3W3P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DAM-3W3P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-3W3P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DAM-3W3P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DAM-3W3S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DAM-3W3S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DAM-3W3S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-3W3S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DAM-3W3S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DAM-3WK3P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DAM-3WK3P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DAM-3WK3P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DAM-3WK3P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DAM-3WK3S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DAM-3WK3S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DAM-3WK3S-OL2-A197 . . . . . . . . . . . . . . . . 77
DAM-3WK3S-OL4-A197 . . . . . . . . . . . . . . . . 77
DAM-7W2P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DAM-7W2P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DAM-7W2P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DAM-7W2P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DAM-7W2P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-7W2P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DAM-7W2P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DAM-7W2S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DAM-7W2S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DAM-7W2S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DAM-7W2S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DAM-7W2S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DAM-7W2S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DAM11W1P1A0NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1P1A7NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1P1A9NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1PF179ANMBK52 . . . . . . . . . . . . . . 195
DAM11W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DAM11W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DAM11W1PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM11W1POL3NMBK52 . . . . . . . . . . . . . . . 195
DAM11W1S1A0NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1S1A7NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1S1A9NNMBK52. . . . . . . . . . . . . . . 195
DAM11W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAM11W1SF179ANMBK52 . . . . . . . . . . . . . . 195
DAM11W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DAM11W1SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM11W1SOL3NMBK52 . . . . . . . . . . . . . . . 195
DAM15P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAM15P1A0NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15P1A7NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15P1A9NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAM15PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAM15PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PE . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Part Number
Page
DAM15PF . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAM15PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138
DAM15PF179A . . . . . . . . . . . . . . . . . . . . . . . 138
DAM15PF179ANMBK52 . . . . . . . . . . . . . . . . 195
DAM15PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAM15PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAM15PL . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174
DAM15PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAM15PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180
DAM15PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178
DAM15PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178
DAM15PNM*1AON . . . . . . . . . . . . . . . . . . . . 176
DAM15PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195
DAM15PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DAM15PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DAM15PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195
DAM15PNMC77 . . . . . . . . . . . . . . . . . . . . . . 195
DAM15POL3NM . . . . . . . . . . . . . . . . . . . . . . 172
DAM15POL3NMBK52 . . . . . . . . . . . . . . . . . . 195
DAM15PP. . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAM15PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAM15PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAM15PX . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAM15PZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAM15S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAM15S1A0NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15S1A7NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15S1A9NNMBK52 . . . . . . . . . . . . . . . . . 195
DAM15SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM15SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAM15SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SE . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM15SF . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAM15SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139
DAM15SF179A . . . . . . . . . . . . . . . . . . . . . . . 139
DAM15SF179ANMBK52 . . . . . . . . . . . . . . . . 195
DAM15SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM15SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAM15SL . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175
DAM15SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM15SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181
DAM15SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179
DAM15SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179
DAM15SNM*1AON . . . . . . . . . . . . . . . . . . . . 177
DAM15SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DAM15SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DAM15SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173
DAM15SOL3NMBK52 . . . . . . . . . . . . . . . . . . 195
DAM15SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAM15SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAM15SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAM15SX . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM15SZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAM3W3P-NMC-77 . . . . . . . . . . . . . . . . . . . 195
DAM3W3PK87. . . . . . . . . . . . . . . . . . . . . . . . 78
DAM3W3PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DAM3W3PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM3W3PNMC76 . . . . . . . . . . . . . . . . . . . . 195
DAM3W3POL3NMBK52 . . . . . . . . . . . . . . . . 195
DAM3W3S-NMC-76 . . . . . . . . . . . . . . . . . . . 195
DAM3W3SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DAM3W3SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DAM3W3SNMB76 . . . . . . . . . . . . . . . . . . . . 195
DAM3W3SNMB77 . . . . . . . . . . . . . . . . . . . . 195
DAM3W3SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM3WK3PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DAM3WK3PNM . . . . . . . . . . . . . . . . . . . . . . 188
DAM3WK3SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAM3WK3SNM . . . . . . . . . . . . . . . . . . . . . . 189
DAM53512-1405 . . . . . . . . . . . . . . . . . . . . . . 49
DAM7W2P1A0NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2P1A7NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2P1A9NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2PF179ANMBK52 . . . . . . . . . . . . . . 195
DAM7W2PK87. . . . . . . . . . . . . . . . . . . . . . . . 78
DAM7W2PNM . . . . . . . . . . . . . . . . . . . . . . . 188
Part Number
Page
DAM7W2PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM7W2POL3NMBK52 . . . . . . . . . . . . . . . . 195
DAM7W2S-NMC-77 . . . . . . . . . . . . . . . . . . . 195
DAM7W2S1A0NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2S1A7NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2S1A9NNMBK52 . . . . . . . . . . . . . . . 195
DAM7W2SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DAM7W2SF179ANMBK52 . . . . . . . . . . . . . . 195
DAM7W2SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DAM7W2SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DAM7W2SOL3NMBK52 . . . . . . . . . . . . . . . . 195
DAMA15PNM . . . . . . . . . . . . . . . . . . . . . . . . 182
DAMA15PNMBK52 . . . . . . . . . . . . . . . . . . . . 195
DAMA15SNM . . . . . . . . . . . . . . . . . . . . . . . . 183
DAMA15SNMBK52 . . . . . . . . . . . . . . . . . . . . 195
DAMA26PNM . . . . . . . . . . . . . . . . . . . . . . . . 184
DAMA26SNM . . . . . . . . . . . . . . . . . . . . . . . . 185
DAMAY15PNM . . . . . . . . . . . . . . . . . . . . . . . 182
DAMAY15SNM . . . . . . . . . . . . . . . . . . . . . . . 183
DAMAY26PNM . . . . . . . . . . . . . . . . . . . . . . . 184
DAMAY26SNM . . . . . . . . . . . . . . . . . . . . . . . 185
DAMB-11W1S-NMB-77 . . . . . . . . . . . . . . . . . 195
DAMB-15S-NMC-77 . . . . . . . . . . . . . . . . . . . 195
DAMB-7W2S-NMB-76 . . . . . . . . . . . . . . . . . 195
DAMB-7W2S-NMB-77 . . . . . . . . . . . . . . . . . 195
DAMB15SNMB77 . . . . . . . . . . . . . . . . . . . . . 195
DAMB15SNMC76 . . . . . . . . . . . . . . . . . . . . . 195
DAMC11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMC11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DAMC11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMC11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMC11H1PJK87. . . . . . . . . . . . . . . . . . . . . . 60
DAMC11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMC11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DAMC11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMC15PJK87. . . . . . . . . . . . . . . . . . . . . . . . 16
DAMC15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17
DAMC3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMC3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMC3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMC3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMC3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44
DAMC3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50
DAMC3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45
DAMC3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51
DAMC3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMC3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMC3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60
DAMC3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61
DAMC3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMC3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMC3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64
DAMC3PK3SVA197TM . . . . . . . . . . . . . . . . . 65
DAMC7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMC7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMC7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMC7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMC7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMC7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMC7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMC7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMD11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMD11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DAMD11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMD11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMD11H1PJK87. . . . . . . . . . . . . . . . . . . . . . 60
DAMD11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMD11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DAMD11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMD15PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DAMD15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17
DAMD3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMD3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMD3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMD3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMD3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44
DAMD3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50
DAMD3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45
DAMD3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51
DAMD3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMD3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMD3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60
DAMD3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DAMMN11V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DAMMN11V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DAMMN3C3PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMN3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMN3CK3PN . . . . . . . . . . . . . . . . . . . . . 150
DAMMN3CK3SN. . . . . . . . . . . . . . . . . . . . . . 151
DAMMN3H3PN . . . . . . . . . . . . . . . . . . . . . . 158
DAMMN3H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMN3HK3PN . . . . . . . . . . . . . . . . . . . . . 158
DAMMN3HK3SN . . . . . . . . . . . . . . . . . . . . . 159
DAMMN3V3PN. . . . . . . . . . . . . . . . . . . . . . . 162
DAMMN3V3SN. . . . . . . . . . . . . . . . . . . . . . . 163
DAMMN3VK3PN . . . . . . . . . . . . . . . . . . . . . 162
DAMMN3VK3SN . . . . . . . . . . . . . . . . . . . . . 163
DAMMN7C2PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMN7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMN7H2PN . . . . . . . . . . . . . . . . . . . . . . 158
DAMMN7H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMN7V2PN. . . . . . . . . . . . . . . . . . . . . . . 162
DAMMN7V2SN. . . . . . . . . . . . . . . . . . . . . . . 163
DAMMP11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMP11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMP11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMP11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMP3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMP3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMP3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMP3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMP3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMP3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMP3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMP3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMP7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMP7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMP7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMP7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMV11C1PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMV11C1SN . . . . . . . . . . . . . . . . . . . . . . 151
DAMMV11H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DAMMV11H1SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMV11V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DAMMV11V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DAMMV3C3PN . . . . . . . . . . . . . . . . . . . . . . . 150
DAMMV3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMV3CK3PN . . . . . . . . . . . . . . . . . . . . . 150
DAMMV3CK3SN . . . . . . . . . . . . . . . . . . . . . . 151
DAMMV3H3PN. . . . . . . . . . . . . . . . . . . . . . . 158
DAMMV3H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMV3HK3PN . . . . . . . . . . . . . . . . . . . . . 158
DAMMV3HK3SN . . . . . . . . . . . . . . . . . . . . . 159
DAMMV3V3PN . . . . . . . . . . . . . . . . . . . . . . . 162
DAMMV3V3SN . . . . . . . . . . . . . . . . . . . . . . . 163
DAMMV3VK3PN . . . . . . . . . . . . . . . . . . . . . . 162
DAMMV3VK3SN. . . . . . . . . . . . . . . . . . . . . . 163
DAMMV7C2PN . . . . . . . . . . . . . . . . . . . . . . . 150
DAMMV7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMV7H2PN. . . . . . . . . . . . . . . . . . . . . . . 158
DAMMV7H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMV7V2PN . . . . . . . . . . . . . . . . . . . . . . . 162
DAMMV7V2SN . . . . . . . . . . . . . . . . . . . . . . . 163
DAMMY11W1P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMMY11W1S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMMY15P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAMMY15S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAMMY3W3P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMMY3W3S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMMY3WK3P . . . . . . . . . . . . . . . . . . . . . . 166
DAMMY3WK3S . . . . . . . . . . . . . . . . . . . . . . 167
DAMMY7W2P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMMY7W2S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMMZ11C1PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMZ11C1SN. . . . . . . . . . . . . . . . . . . . . . . 151
DAMMZ11H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DAMMZ11H1SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMZ11V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DAMMZ11V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DAMMZ3C3PN . . . . . . . . . . . . . . . . . . . . . . . 150
DAMMZ3C3SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMZ3CK3PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMZ3CK3SN . . . . . . . . . . . . . . . . . . . . . . 151
DAMMZ3H3PN . . . . . . . . . . . . . . . . . . . . . . . 158
DAMMZ3H3SN . . . . . . . . . . . . . . . . . . . . . . . 159
DAMMZ3HK3PN . . . . . . . . . . . . . . . . . . . . . . 158
Part Number
Page
DAMMZ3HK3SN . . . . . . . . . . . . . . . . . . . . . . 159
DAMMZ3V3PN . . . . . . . . . . . . . . . . . . . . . . . 162
DAMMZ3V3SN . . . . . . . . . . . . . . . . . . . . . . . 163
DAMMZ3VK3PN . . . . . . . . . . . . . . . . . . . . . . 162
DAMMZ3VK3SN . . . . . . . . . . . . . . . . . . . . . . 163
DAMMZ7C2PN . . . . . . . . . . . . . . . . . . . . . . . 150
DAMMZ7C2SN . . . . . . . . . . . . . . . . . . . . . . . 151
DAMMZ7H2PN . . . . . . . . . . . . . . . . . . . . . . . 158
DAMMZ7H2SN . . . . . . . . . . . . . . . . . . . . . . . 159
DAMMZ7V2PN . . . . . . . . . . . . . . . . . . . . . . . 162
DAMMZ7V2SN . . . . . . . . . . . . . . . . . . . . . . . 163
DAMN11C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DAMN11C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DAMN11C1SNA197 . . . . . . . . . . . . . . . . . . . . 53
DAMN11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMN11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DAMN11H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DAMN11H1SNA197 . . . . . . . . . . . . . . . . . . . . 67
DAMN11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMN15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DAMN15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DAMN3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMN3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMN3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMN3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMN3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52
DAMN3CK3PYK87TM . . . . . . . . . . . . . . . . . . 56
DAMN3CK3SNA197TM . . . . . . . . . . . . . . . . . 53
DAMN3CK3SYA197TM . . . . . . . . . . . . . . . . . 57
DAMN3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMN3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMN3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMN3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMN3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66
DAMN3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70
DAMN3HK3SNA197TM . . . . . . . . . . . . . . . . . 67
DAMN3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71
DAMN7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMN7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMN7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMN7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMN7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMN7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMN7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMN7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMP11C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMP11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DAMP11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMP11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMP11H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMP11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMP11P1PVK87. . . . . . . . . . . . . . . . . . . . . . 64
DAMP11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMP15PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16
DAMP15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17
DAMP3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMP3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMP3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMP3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMP3CK3PJK87TM. . . . . . . . . . . . . . . . . . . 44
DAMP3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50
DAMP3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45
DAMP3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51
DAMP3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMP3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMP3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60
DAMP3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61
DAMP3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMP3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMP3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64
DAMP3PK3SVA197TM . . . . . . . . . . . . . . . . . . 65
DAMP7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMP7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMP7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMP7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMP7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMP7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMP7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMP7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMV11C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DAMV11C1PYK87. . . . . . . . . . . . . . . . . . . . . . 56
DAMV11C1SNA197. . . . . . . . . . . . . . . . . . . . . 53
DAMV11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DAMM15SE . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM15SF . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAMM15SF179 . . . . . . . . . . . . . . . . . . . . . . 139
DAMM15SF179A . . . . . . . . . . . . . . . . . . . . . 139
DAMM15SG . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAMM15SH . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM15SK . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAMM15SL . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAMM15SM . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM15SP . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAMM15SR . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAMM15SS . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAMM15SW . . . . . . . . . . . . . . . . . . . . . . . . 133
DAMM15SX . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM15SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM3W3P . . . . . . . . . . . . . . . . . . . . . . . . 166
DAMM3W3S . . . . . . . . . . . . . . . . . . . . . . . . 167
DAMM3WK3P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMM3WK3S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMM7W2P . . . . . . . . . . . . . . . . . . . . . . . . 166
DAMM7W2S . . . . . . . . . . . . . . . . . . . . . . . . 167
DAMMC11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMC11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMC11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMC11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMC3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMC3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMC3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMC3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMC3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMC3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMC3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMC3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMC7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMC7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMC7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMC7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMD11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMD11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMD11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMD11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMD3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMD3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMD3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMD3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMD3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMD3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMD3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMD3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMD7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMD7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMD7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMD7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMME11W1P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMME11W1S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMME15P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAMME15S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAMME3W3P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMME3W3S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMME3WK3P . . . . . . . . . . . . . . . . . . . . . . 166
DAMME3WK3S . . . . . . . . . . . . . . . . . . . . . . 167
DAMME7W2P . . . . . . . . . . . . . . . . . . . . . . . 166
DAMME7W2S . . . . . . . . . . . . . . . . . . . . . . . 167
DAMMG11C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMG11C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMG11H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMG11H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMG3C3PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMG3C3SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMG3CK3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DAMMG3CK3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DAMMG3H3PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMG3H3SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMG3HK3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DAMMG3HK3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DAMMG7C2PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DAMMG7C2SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DAMMG7H2PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DAMMG7H2SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DAMMN11C1PN . . . . . . . . . . . . . . . . . . . . . . 150
DAMMN11C1SN . . . . . . . . . . . . . . . . . . . . . . 151
DAMMN11H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DAMMN11H1SN . . . . . . . . . . . . . . . . . . . . . . 159
Reader’s
Part Number
Page
DAMD3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMD3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMD3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64
DAMD3PK3SVA197TM . . . . . . . . . . . . . . . . . 65
DAMD7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMD7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMD7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMD7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMD7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMD7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMD7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMD7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAME11W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DAME11W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
DAME15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAME15S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAME3W3PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DAME3W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAME3WK3PK87 . . . . . . . . . . . . . . . . . . . . . 78
DAME3WK3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DAME7W2PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DAME7W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAMG11C1PJK87. . . . . . . . . . . . . . . . . . . . . . 44
DAMG11C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DAMG11C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMG11C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMG11H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DAMG11H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMG11P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DAMG11P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMG15PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DAMG15SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17
DAMG3C3PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMG3C3PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMG3C3SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMG3C3SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMG3CK3PJK87TM . . . . . . . . . . . . . . . . . . 44
DAMG3CK3PVK87TM . . . . . . . . . . . . . . . . . . 50
DAMG3CK3SJA197TM . . . . . . . . . . . . . . . . . . 45
DAMG3CK3SVA197TM . . . . . . . . . . . . . . . . . . 51
DAMG3H3PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMG3H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMG3HK3PJK87TM . . . . . . . . . . . . . . . . . . 60
DAMG3HK3SJA197TM . . . . . . . . . . . . . . . . . . 61
DAMG3P3PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMG3P3SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMG3PK3PVK87TM . . . . . . . . . . . . . . . . . . 64
DAMG3PK3SVA197TM . . . . . . . . . . . . . . . . . 65
DAMG7C2PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DAMG7C2PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DAMG7C2SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DAMG7C2SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DAMG7H2PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DAMG7H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DAMG7P2PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DAMG7P2SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DAMM11W1P . . . . . . . . . . . . . . . . . . . . . . . . 166
DAMM11W1S . . . . . . . . . . . . . . . . . . . . . . . . 167
DAMM15P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAMM15PA . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PB . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15PC . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAMM15PD . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PE . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15PF . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAMM15PF179 . . . . . . . . . . . . . . . . . . . . . . 138
DAMM15PF179A . . . . . . . . . . . . . . . . . . . . . 138
DAMM15PG . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PH . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15PK . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAMM15PL . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PM . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15PP . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAMM15PR . . . . . . . . . . . . . . . . . . . . . . . . . 134
DAMM15PS . . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PW. . . . . . . . . . . . . . . . . . . . . . . . . 132
DAMM15PX . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136
DAMM15S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAMM15SA . . . . . . . . . . . . . . . . . . . . . . . . . 133
DAMM15SB . . . . . . . . . . . . . . . . . . . . . . . . . 137
DAMM15SC . . . . . . . . . . . . . . . . . . . . . . . . . 135
DAMM15SD . . . . . . . . . . . . . . . . . . . . . . . . . 133
Part Number Index
285
Reader’s
Resource
D Subminiature
286
Part Number
Page
DAMV11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DAMV11H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DAMV11H1SNA197 . . . . . . . . . . . . . . . . . . . . 67
DAMV11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMV15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DAMV15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DAMV3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMV3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMV3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMV3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMV3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52
DAMV3CK3PYK87TM . . . . . . . . . . . . . . . . . . 56
DAMV3CK3SNA197TM . . . . . . . . . . . . . . . . . 53
DAMV3CK3SYA197TM. . . . . . . . . . . . . . . . . . 57
DAMV3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMV3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMV3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMV3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMV3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66
DAMV3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70
DAMV3HK3SNA197TM . . . . . . . . . . . . . . . . . 67
DAMV3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71
DAMV7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMV7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMV7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMV7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMV7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMV7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMV7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMV7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMY11W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DAMY11W1PNM . . . . . . . . . . . . . . . . . . . . . . 188
DAMY11W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
DAMY11W1SNM . . . . . . . . . . . . . . . . . . . . . . 189
DAMY15P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DAMY15PNM . . . . . . . . . . . . . . . . . . . . . . . . 180
DAMY15PNM*1AON . . . . . . . . . . . . . . . . . . . 176
DAMY15POL3NM . . . . . . . . . . . . . . . . . . . . . 172
DAMY15S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DAMY15SNM . . . . . . . . . . . . . . . . . . . . . . . . 181
DAMY15SNM*1AON . . . . . . . . . . . . . . . . . . . 177
DAMY15SOL3NM . . . . . . . . . . . . . . . . . . . . . 173
DAMY3W3PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DAMY3W3PNM . . . . . . . . . . . . . . . . . . . . . . 188
DAMY3W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAMY3W3SNM . . . . . . . . . . . . . . . . . . . . . . 189
DAMY3WK3PK87 . . . . . . . . . . . . . . . . . . . . . 78
DAMY3WK3PNM . . . . . . . . . . . . . . . . . . . . . 188
DAMY3WK3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DAMY3WK3SNM . . . . . . . . . . . . . . . . . . . . . 189
DAMY7W2PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DAMY7W2PNM . . . . . . . . . . . . . . . . . . . . . . 188
DAMY7W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DAMY7W2SNM . . . . . . . . . . . . . . . . . . . . . . 189
DAMZ11C1PNK87. . . . . . . . . . . . . . . . . . . . . . 52
DAMZ11C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMZ11C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMZ11C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMZ11H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DAMZ11H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMZ11H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMZ11H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMZ15PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DAMZ15SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DAMZ3C3PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMZ3C3PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMZ3C3SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DAMZ3C3SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMZ3CK3PNK87TM . . . . . . . . . . . . . . . . . . 52
DAMZ3CK3PYK87TM. . . . . . . . . . . . . . . . . . . 56
DAMZ3CK3SNA197TM . . . . . . . . . . . . . . . . . . 53
DAMZ3CK3SYA197TM . . . . . . . . . . . . . . . . . . 57
DAMZ3H3PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMZ3H3PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMZ3H3SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMZ3H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DAMZ3HK3PNK87TM . . . . . . . . . . . . . . . . . . 66
DAMZ3HK3PYK87TM . . . . . . . . . . . . . . . . . . 70
DAMZ3HK3SNA197TM. . . . . . . . . . . . . . . . . . 67
DAMZ3HK3SYA197TM . . . . . . . . . . . . . . . . . . 71
DAMZ7C2PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DAMZ7C2PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DAMZ7C2SNA197 . . . . . . . . . . . . . . . . . . . . . 53
Part Number Index
Part Number
Page
DAMZ7C2SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DAMZ7H2PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DAMZ7H2PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DAMZ7H2SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DAMZ7H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DANG15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DANG15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DANGE15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DANGE15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DANGL15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DANGL15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DANGX15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DANGX15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DANGZ15P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DANGZ15S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DAW15P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DAW15P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DAW15S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DAW15S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DAWE15P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DAWE15P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38
DAWE15S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DAWE15S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39
DAX15P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DAX15PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DAX15S-0L2-A197-146 . . . . . . . . . . . . . . . . . . 11
DAX15SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DB-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DB-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DB111807-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DB111807-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DB111811 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
DB111811-2 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DB111949-43 . . . . . . . . . . . . . . . . . . . . . . . . . 48
DB115339-2 . . . . . . . . . . . . . . . . . . . . . . . . 207
DB115339-22 . . . . . . . . . . . . . . . . . . . . . . . 205
DB115386-102A . . . . . . . . . . . . . . . . . . . . . . 195
DB115386-3B . . . . . . . . . . . . . . . . . . . . . . . 207
DB121073-151 . . . . . . . . . . . . . . . . . . . . . . . 200
DB121073-51 . . . . . . . . . . . . . . . . . . . . . . . . 200
DB19678-168 . . . . . . . . . . . . . . . . . . . . 193, 195
DB19678-171 . . . . . . . . . . . . . . . . . . . . . . . . 195
DB19678-175 . . . . . . . . . . . . . . . . . . . . . . . . 195
DB19678-2 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DB19977-2 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DB19977-43 . . . . . . . . . . . . . . . . . . . . . 193, 195
DB20962 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DB20962-18 . . . . . . . . . . . . . . . . . . . . . . . . 192
DB22254 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
DB22255 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
DB24659 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DB24659-15 . . . . . . . . . . . . . . . . . . . . . 192, 195
DB25P-0L2-K87. . . . . . . . . . . . . . . . . . . . . . . 10
DB25P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DB25P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DB25P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DB25P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DB25P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DB25P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DB25P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22
DB25P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DB25P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20
DB25P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DB25P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DB25P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DB25P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DB25P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12
DB25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DB25S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11
DB25S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27
DB25S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27
DB25S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23
DB25S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23
DB25S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23
DB25S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25
DB25S-1AFN-A197. . . . . . . . . . . . . . . . . . . . . 23
DB25S-1AJN-A197. . . . . . . . . . . . . . . . . . . . . 25
DB25S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21
DB25S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27
DB25S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27
DB25S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25
DB25S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25
DB25S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13
Part Number
Page
DB25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DB50906-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DB51212 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DB51213 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DB51221-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210
DB51226-1B . . . . . . . . . . . . . . . . . . . . . . . . 206
DB53750-2 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DBA13W3PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DBA13W3SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DBA17W2PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DBA17W2SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DBA21W1PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DBA21W1SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DBA25PK87FO . . . . . . . . . . . . . . . . . . . . . . . 36
DBA25SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37
DBA5W5PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DBA5W5SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DBA9W4PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DBA9W4SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DBBS-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
DBBU111511 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DBE25P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DBE25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DBE25S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DBE25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DBJK25P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110
DBJK25P*-1A5N . . . . . . . . . . . . . . . . . . . . . 118
DBJK25P*-1A6N . . . . . . . . . . . . . . . . . . . . . 118
DBJK25P*-1A7N . . . . . . . . . . . . . . . . . . . . . 114
DBJK25P*-1A8N . . . . . . . . . . . . . . . . . . . . . 114
DBJK25P*-1A9N . . . . . . . . . . . . . . . . . . . . . 114
DBJK25P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116
DBJK25P*-1AFN . . . . . . . . . . . . . . . . . . . . . . 114
DBJK25P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116
DBJK25P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114
DBJK25P*-1AJN . . . . . . . . . . . . . . . . . . . . . . 116
DBJK25P*-1APN . . . . . . . . . . . . . . . . . . . . . 118
DBJK25P*-1ATN . . . . . . . . . . . . . . . . . . . . . 118
DBJK25P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118
DBJK25P*-1AVN . . . . . . . . . . . . . . . . . . . . . 116
DBJK25P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116
DBJK25P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108
DBJK25P*-1U7N . . . . . . . . . . . . . . . . . . . . . 112
DBJK25P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112
DBJK25P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DBJK25S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111
DBJK25S*-1A5N . . . . . . . . . . . . . . . . . . . . . 119
DBJK25S*-1A6N . . . . . . . . . . . . . . . . . . . . . 119
DBJK25S*-1A7N . . . . . . . . . . . . . . . . . . . . . 115
DBJK25S*-1A8N . . . . . . . . . . . . . . . . . . . . . 115
DBJK25S*-1A9N . . . . . . . . . . . . . . . . . . . . . 115
DBJK25S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117
DBJK25S*-1AFN. . . . . . . . . . . . . . . . . . . . . . 115
DBJK25S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117
DBJK25S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115
DBJK25S*-1AJN . . . . . . . . . . . . . . . . . . . . . . 117
DBJK25S*-1APN . . . . . . . . . . . . . . . . . . . . . 119
DBJK25S*-1ATN . . . . . . . . . . . . . . . . . . . . . 119
DBJK25S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119
DBJK25S*-1AVN . . . . . . . . . . . . . . . . . . . . . 117
DBJK25S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117
DBJK25S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109
DBJK25S*-1U7N . . . . . . . . . . . . . . . . . . . . . 113
DBJK25S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113
DBJK25S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121
DBJKE25P*-1A0N . . . . . . . . . . . . . . . . . . . . 110
DBJKE25P*-1U0N . . . . . . . . . . . . . . . . . . . . 108
DBJKE25P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DBJKE25P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DBJKE25S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DBJKE25S*-1U0N . . . . . . . . . . . . . . . . . . . . 109
DBJKE25S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121
DBJKE25S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DBJKX25P*-1A0N . . . . . . . . . . . . . . . . . . . . 110
DBJKX25P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DBJKX25P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DBJKX25S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DBJKX25S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121
DBJKX25S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DBJT25P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DBJT25S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DBJTE25P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DBJTE25S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
Part Number
Page
DBJTX25P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DBJTX25S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
DBM-13W3P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DBM-13W3P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DBM-13W3P-NMB-76 . . . . . . . . . . . . . . . . . 195
DBM-13W3P-NMC-76 . . . . . . . . . . . . . . . . . 195
DBM-13W3P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DBM-13W3P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DBM-13W3S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DBM-13W3S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DBM-13W3S-NMB-77 . . . . . . . . . . . . . . . . . 195
DBM-13W3S-NMC-76 . . . . . . . . . . . . . . . . . 195
DBM-13W3S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DBM-13W3S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DBM-17W2P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DBM-17W2P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DBM-17W2P-NMB-76 . . . . . . . . . . . . . . . . . 195
DBM-17W2P-NMC-76 . . . . . . . . . . . . . . . . . 195
DBM-17W2P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DBM-17W2P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DBM-17W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DBM-17W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DBM-17W2S-NMC-76 . . . . . . . . . . . . . . . . . 195
DBM-17W2S-NMC-77 . . . . . . . . . . . . . . . . . 195
DBM-17W2S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DBM-17W2S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DBM-21W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DBM-21W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DBM-21W1P-NMB-76. . . . . . . . . . . . . . . . . . 195
DBM-21W1P-NMB-77. . . . . . . . . . . . . . . . . . 195
DBM-21W1P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DBM-21W1P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DBM-21W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DBM-21W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DBM-21W1S-NMB-76. . . . . . . . . . . . . . . . . . 195
DBM-21W1S-NMB-77. . . . . . . . . . . . . . . . . . 195
DBM-21W1S-NMC-76 . . . . . . . . . . . . . . . . . 195
DBM-21W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DBM-21W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DBM-25S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195
DBM-25S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195
DBM-25S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DBM-5W5P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DBM-5W5P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DBM-5W5P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DBM-5W5P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DBM-5W5P-NMC-77 . . . . . . . . . . . . . . . . . . 195
DBM-5W5P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DBM-5W5P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DBM-5W5S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DBM-5W5S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DBM-5W5S-NMB-76 . . . . . . . . . . . . . . . . . . 195
DBM-5W5S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DBM-5W5S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DBM-5W5S-NMC-77 . . . . . . . . . . . . . . . . . . 195
DBM-5W5S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DBM-5W5S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DBM-9W4P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DBM-9W4P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DBM-9W4P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DBM-9W4P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DBM-9W4P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DBM-9W4P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DBM-9W4S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DBM-9W4S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DBM-9W4S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DBM-9W4S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DBM-9W4S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DBM-9W4S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DBM13W3P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DBM13W3P1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3P1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3P1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3PF179ANMBK52 . . . . . . . . . . . . . 195
DBM13W3PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DBM13W3PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBM13W3PNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM13W3POL3NMBK52 . . . . . . . . . . . . . . . 195
DBM13W3S-NMB-76 . . . . . . . . . . . . . . . . . . 195
DBM13W3S1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3S1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3S1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM13W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DBMC21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMC25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DBMC25SJA197. . . . . . . . . . . . . . . . . . . . . . . 17
DBMC5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMC5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMC5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMC5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMC5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMC5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMC5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMC5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMC9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMC9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMC9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMC9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMC9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMC9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMC9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMC9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMD13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMD13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMD13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMD13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMD13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMD13H3SJA197. . . . . . . . . . . . . . . . . . . . . 61
DBMD13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMD13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMD17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMD17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMD17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMD17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMD17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMD17H2SJA197. . . . . . . . . . . . . . . . . . . . . 61
DBMD17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMD17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMD21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMD21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMD21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMD21C1SVA197. . . . . . . . . . . . . . . . . . . . . 51
DBMD21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMD21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMD21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMD21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMD25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DBMD25SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DBMD5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMD5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMD5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMD5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMD5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMD5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMD5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMD5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMD9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMD9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMD9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMD9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMD9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMD9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMD9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMD9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBME13W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBME13W3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DBME17W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBME17W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
DBME21W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBME21W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
DBME25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBME25S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBME5W5PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DBME5W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBME9W4PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DBME9W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBMG13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMG13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMG13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMG13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMG13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMG13H3SJA197 . . . . . . . . . . . . . . . . . . . . 61
DBMG13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMG13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMG17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMG17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
Part Number
Page
DBMG17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMG17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMG17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMG17H2SJA197 . . . . . . . . . . . . . . . . . . . . 61
DBMG17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMG17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMG21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMG21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMG21C1SJA197. . . . . . . . . . . . . . . . . . . . . 45
DBMG21C1SVA197. . . . . . . . . . . . . . . . . . . . . 51
DBMG21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMG21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMG21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMG21P1SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMG25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DBMG25SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DBMG5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMG5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMG5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMG5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMG5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMG5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMG5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMG5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMG9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMG9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMG9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMG9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMG9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMG9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMG9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMG9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMM13W3P. . . . . . . . . . . . . . . . . . . . . . . . 166
DBMM13W3S. . . . . . . . . . . . . . . . . . . . . . . . 167
DBMM17W2P. . . . . . . . . . . . . . . . . . . . . . . . 166
DBMM17W2S. . . . . . . . . . . . . . . . . . . . . . . . 167
DBMM21W1P . . . . . . . . . . . . . . . . . . . . . . . . 166
DBMM21W1S . . . . . . . . . . . . . . . . . . . . . . . . 167
DBMM25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBMM25PA . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PB . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25PC . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBMM25PD . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PE . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25PF . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBMM25PF179 . . . . . . . . . . . . . . . . . . . . . . 138
DBMM25PF179A . . . . . . . . . . . . . . . . . . . . . 138
DBMM25PG . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PH . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25PK . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBMM25PL . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PM . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25PP . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBMM25PR . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBMM25PS . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PW . . . . . . . . . . . . . . . . . . . . . . . . 132
DBMM25PX . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBMM25S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBMM25SA . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SB . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM25SC . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBMM25SD . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SE . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM25SF . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBMM25SF179 . . . . . . . . . . . . . . . . . . . . . . 139
DBMM25SF179A . . . . . . . . . . . . . . . . . . . . . 139
DBMM25SG . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SH . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM25SK . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBMM25SL . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SM . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM25SP . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBMM25SR . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBMM25SS . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SW . . . . . . . . . . . . . . . . . . . . . . . . 133
DBMM25SX . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM25SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBMM5W5S . . . . . . . . . . . . . . . . . . . . . . . . 167
DBMM9W4P . . . . . . . . . . . . . . . . . . . . . . . . 166
DBMM9W4S . . . . . . . . . . . . . . . . . . . . . . . . 167
DBMMC13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMC13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DBM25SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM25SF. . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBM25SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139
DBM25SF179A . . . . . . . . . . . . . . . . . . . . . . . 139
DBM25SF179ANMBK52 . . . . . . . . . . . . . . . . 195
DBM25SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBM25SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM25SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBM25SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBM25SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175
DBM25SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM25SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181
DBM25SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179
DBM25SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179
DBM25SNM*1AON. . . . . . . . . . . . . . . . . . . . 177
DBM25SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DBM25SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173
DBM25SOL3NMBK52 . . . . . . . . . . . . . . . . . 195
DBM25SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBM25SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBM25SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBM25SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBM25SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM25SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM5W5PNMB77 . . . . . . . . . . . . . . . . . . . . 195
DBM5W5PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBM5W5SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DBM5W5SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DBM5W5SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBM9W4P1A0NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4P1A7NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4P1A9NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4PF179ANMBK52 . . . . . . . . . . . . . . 195
DBM9W4PK87. . . . . . . . . . . . . . . . . . . . . . . . 78
DBM9W4PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DBM9W4PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBM9W4POL3NMBK52 . . . . . . . . . . . . . . . . 195
DBM9W4S1A0NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4S1A7NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4S1A9NNMBK52 . . . . . . . . . . . . . . . 195
DBM9W4SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DBM9W4SF179ANMBK52 . . . . . . . . . . . . . . 195
DBM9W4SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DBM9W4SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBM9W4SOL3NMBK52 . . . . . . . . . . . . . . . . 195
DBMA25PNM . . . . . . . . . . . . . . . . . . . . . . . . 182
DBMA25PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBMA25SNM . . . . . . . . . . . . . . . . . . . . . . . . 183
DBMA25SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DBMA44PNM . . . . . . . . . . . . . . . . . . . . . . . . 184
DBMA44SNM . . . . . . . . . . . . . . . . . . . . . . . . 185
DBMAY25PNM . . . . . . . . . . . . . . . . . . . . . . . 182
DBMAY25SNM . . . . . . . . . . . . . . . . . . . . . . . 183
DBMAY44PNM . . . . . . . . . . . . . . . . . . . . . . . 184
DBMAY44SNM . . . . . . . . . . . . . . . . . . . . . . . 185
DBMB-17W2S-NMB-76 . . . . . . . . . . . . . . . . 195
DBMB-25S-NMB-76 . . . . . . . . . . . . . . . . . . . 195
DBMB-25S-NMB-77 . . . . . . . . . . . . . . . . . . . 195
DBMB-25S-NMC-77 . . . . . . . . . . . . . . . . . . . 195
DBMB25SNMC76. . . . . . . . . . . . . . . . . . . . . 195
DBMC13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMC13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMC13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMC13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMC13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMC13H3SJA197. . . . . . . . . . . . . . . . . . . . . 61
DBMC13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMC13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMC17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMC17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMC17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMC17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMC17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMC17H2SJA197. . . . . . . . . . . . . . . . . . . . . 61
DBMC17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMC17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMC21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMC21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMC21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMC21C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMC21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMC21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMC21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
Reader’s
Part Number
Page
DBM13W3SF179ANMBK52 . . . . . . . . . . . . . 195
DBM13W3SNM . . . . . . . . . . . . . . . . . . . . . . 189
DBM13W3SNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM13W3SOL3NMBK52 . . . . . . . . . . . . . . . 195
DBM17W2P-NMC-77 . . . . . . . . . . . . . . . . . . 195
DBM17W2P1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2P1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2P1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2PF179ANMBK52 . . . . . . . . . . . . . 195
DBM17W2PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DBM17W2PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBM17W2PNMB77 . . . . . . . . . . . . . . . . . . . 195
DBM17W2PNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM17W2POL3NMBK52 . . . . . . . . . . . . . . . 195
DBM17W2S1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2S1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2S1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM17W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBM17W2SF179ANMBK52 . . . . . . . . . . . . . 195
DBM17W2SNM . . . . . . . . . . . . . . . . . . . . . . 189
DBM17W2SNMB77 . . . . . . . . . . . . . . . . . . . 195
DBM17W2SNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM17W2SOL3NMBK52 . . . . . . . . . . . . . . . 195
DBM21W1P1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1P1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1P1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1PF179ANMBK52 . . . . . . . . . . . . . . 195
DBM21W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DBM21W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DBM21W1PNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM21W1POL3NMBK52 . . . . . . . . . . . . . . . 195
DBM21W1S1A0NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1S1A7NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1S1A9NNMBK52 . . . . . . . . . . . . . . 195
DBM21W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBM21W1SF179ANMBK52 . . . . . . . . . . . . . . 195
DBM21W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DBM21W1SNMBK52 . . . . . . . . . . . . . . . . . . 195
DBM21W1SOL3NMBK52 . . . . . . . . . . . . . . . 195
DBM25P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBM25P1A0NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25P1A7NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25P1A9NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBM25PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25PF. . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBM25PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138
DBM25PF179A . . . . . . . . . . . . . . . . . . . . . . . 138
DBM25PF179ANMBK52 . . . . . . . . . . . . . . . . 195
DBM25PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBM25PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174
DBM25PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180
DBM25PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178
DBM25PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178
DBM25PNM*1AON. . . . . . . . . . . . . . . . . . . . 176
DBM25PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195
DBM25PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DBM25PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DBM25PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195
DBM25PNMC77 . . . . . . . . . . . . . . . . . . . . . . 195
DBM25POL3NM . . . . . . . . . . . . . . . . . . . . . . 172
DBM25POL3NMBK52 . . . . . . . . . . . . . . . . . 195
DBM25PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBM25PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DBM25PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DBM25PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25PZ. . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DBM25S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBM25S1A0NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25S1A7NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25S1A9NNMBK52. . . . . . . . . . . . . . . . . 195
DBM25SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DBM25SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DBM25SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DBM25SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Part Number Index
287
Reader’s
Resource
D Subminiature
288
Part Number
Page
DBMMC13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMC13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMC17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMC17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMC17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMC17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMC21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMC21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMC21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMC21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMC5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMC5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMC5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMC5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMC9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMC9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMC9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMC9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMD13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMD13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMD13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMD13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMD17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMD17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMD17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMD17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMD21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMD21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMD21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMD21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMD5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMD5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMD5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMD5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMD9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMD9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMD9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMD9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMME13W3P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMME13W3S. . . . . . . . . . . . . . . . . . . . . . . 167
DBMME17W2P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMME17W2S. . . . . . . . . . . . . . . . . . . . . . . 167
DBMME21W1P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMME21W1S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMME25P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBMME25S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBMME5W5P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMME5W5S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMME9W4P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMME9W4S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMMG13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMG13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMG13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMG13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMG17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMG17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMG17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMG17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMG21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMG21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMG21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMG21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMG5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMG5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMG5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMG5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMG9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMG9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMG9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMG9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMN13C3PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMN13C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMN13H3PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMN13H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMN13V3PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMN13V3SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMN17C2PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMN17C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMN17H2PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMN17H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMN17V2PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMN17V2SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMN21C1PN . . . . . . . . . . . . . . . . . . . . . . 150
Part Number Index
Part Number
Page
DBMMN21C1SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMN21H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMN21H1SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMN21V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMN21V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMN5C5PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMN5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMN5H5PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMN5H5SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMN5V5PN. . . . . . . . . . . . . . . . . . . . . . . 162
DBMMN5V5SN. . . . . . . . . . . . . . . . . . . . . . . 163
DBMMN9C4PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMN9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMN9H4PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMN9H4SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMN9V4PN. . . . . . . . . . . . . . . . . . . . . . . 162
DBMMN9V4SN. . . . . . . . . . . . . . . . . . . . . . . 163
DBMMP13C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMP13C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMP13H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMP13H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMP17C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMP17C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMP17H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMP17H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMP21C1PJ . . . . . . . . . . . . . . . . . . . . . . 146
DBMMP21C1SJ . . . . . . . . . . . . . . . . . . . . . . 147
DBMMP21H1PJ . . . . . . . . . . . . . . . . . . . . . . 154
DBMMP21H1SJ . . . . . . . . . . . . . . . . . . . . . . 155
DBMMP5C5PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMP5C5SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMP5H5PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMP5H5SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMP5W5P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMMP9C4PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DBMMP9C4SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DBMMP9H4PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DBMMP9H4SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DBMMV13C3PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMV13C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMV13H3PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMV13H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMV13V3PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMV13V3SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMV17C2PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMV17C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMV17H2PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMV17H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMV17V2PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMV17V2SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMV21C1PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMV21C1SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMV21H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMV21H1SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMV21V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMV21V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMV5C5PN . . . . . . . . . . . . . . . . . . . . . . . 150
DBMMV5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMV5H5PN. . . . . . . . . . . . . . . . . . . . . . . 158
DBMMV5H5SN. . . . . . . . . . . . . . . . . . . . . . . 159
DBMMV5V5PN . . . . . . . . . . . . . . . . . . . . . . . 162
DBMMV5V5SN . . . . . . . . . . . . . . . . . . . . . . . 163
DBMMV9C4PN . . . . . . . . . . . . . . . . . . . . . . . 150
DBMMV9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMV9H4PN. . . . . . . . . . . . . . . . . . . . . . . 158
DBMMV9H4SN. . . . . . . . . . . . . . . . . . . . . . . 159
DBMMV9V4PN . . . . . . . . . . . . . . . . . . . . . . . 162
DBMMV9V4SN . . . . . . . . . . . . . . . . . . . . . . . 163
DBMMY13W3P. . . . . . . . . . . . . . . . . . . . . . . 166
DBMMY13W3S. . . . . . . . . . . . . . . . . . . . . . . 167
DBMMY17W2P. . . . . . . . . . . . . . . . . . . . . . . 166
DBMMY17W2S. . . . . . . . . . . . . . . . . . . . . . . 167
DBMMY21W1P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMMY21W1S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMMY25P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBMMY25S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBMMY5W5P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMMY5W5S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMMY9W4P . . . . . . . . . . . . . . . . . . . . . . . 166
DBMMY9W4S . . . . . . . . . . . . . . . . . . . . . . . 167
DBMMZ13C3PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMZ13C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMZ13H3PN . . . . . . . . . . . . . . . . . . . . . . 158
Part Number
Page
DBMMZ13H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMZ13V3PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMZ13V3SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMZ17C2PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMZ17C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMZ17H2PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMZ17H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMZ17V2PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMZ17V2SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMZ21C1PN . . . . . . . . . . . . . . . . . . . . . . 150
DBMMZ21C1SN . . . . . . . . . . . . . . . . . . . . . . 151
DBMMZ21H1PN . . . . . . . . . . . . . . . . . . . . . . 158
DBMMZ21H1SN . . . . . . . . . . . . . . . . . . . . . . 159
DBMMZ21V1PN . . . . . . . . . . . . . . . . . . . . . . 162
DBMMZ21V1SN . . . . . . . . . . . . . . . . . . . . . . 163
DBMMZ5C5PN . . . . . . . . . . . . . . . . . . . . . . . 150
DBMMZ5C5SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMZ5H5PN . . . . . . . . . . . . . . . . . . . . . . . 158
DBMMZ5H5SN . . . . . . . . . . . . . . . . . . . . . . . 159
DBMMZ5V5PN . . . . . . . . . . . . . . . . . . . . . . . 162
DBMMZ5V5SN . . . . . . . . . . . . . . . . . . . . . . . 163
DBMMZ9C4PN . . . . . . . . . . . . . . . . . . . . . . . 150
DBMMZ9C4SN . . . . . . . . . . . . . . . . . . . . . . . 151
DBMMZ9H4PN . . . . . . . . . . . . . . . . . . . . . . . 158
DBMMZ9H4SN . . . . . . . . . . . . . . . . . . . . . . . 159
DBMMZ9V4PN . . . . . . . . . . . . . . . . . . . . . . . 162
DBMMZ9V4SN . . . . . . . . . . . . . . . . . . . . . . . 163
DBMN13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMN13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMN13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMN13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMN13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMN13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMN13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMN13H3SYA197 . . . . . . . . . . . . . . . . . . . . 71
DBMN17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMN17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMN17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMN17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMN17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMN17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMN17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMN17H2SYA197 . . . . . . . . . . . . . . . . . . . . 71
DBMN21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMN21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMN21C1SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMN21C1SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMN21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMN21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMN21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMN21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMN25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DBMN25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DBMN5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMN5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMN5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMN5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMN5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMN5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMN5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMN5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMN9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMN9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMN9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMN9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMN9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMN9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMN9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMN9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMP13C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMP13C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMP13C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMP13C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMP13H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMP13H3SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMP13P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMP13P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMP17C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMP17C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMP17C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DBMP17C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DBMP17H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMP17H2SJA197 . . . . . . . . . . . . . . . . . . . . . 61
Part Number
Page
DBMP17P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMP17P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DBMP21C1PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DBMP21C1PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DBMP21C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMP21C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMP21H1PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DBMP21H1SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMP21P1PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DBMP21P1SVA197. . . . . . . . . . . . . . . . . . . . . 65
DBMP25PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DBMP25SJA197 . . . . . . . . . . . . . . . . . . . . . . . 17
DBMP5C5PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMP5C5PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMP5C5SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMP5C5SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMP5H5PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMP5H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMP5P5PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMP5P5SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMP5W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBMP5W5PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBMP9C4PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DBMP9C4PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DBMP9C4SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DBMP9C4SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DBMP9H4PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DBMP9H4SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DBMP9P4PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DBMP9P4SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DBMV13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMV13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMV13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMV13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMV13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMV13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMV13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMV13H3SYA197 . . . . . . . . . . . . . . . . . . . . 71
DBMV17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMV17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMV17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMV17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMV17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMV17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMV17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMV17H2SYA197 . . . . . . . . . . . . . . . . . . . . 71
DBMV21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMV21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMV21C1SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMV21C1SYA197. . . . . . . . . . . . . . . . . . . . . 57
DBMV21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMV21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMV21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMV21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMV25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DBMV25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DBMV5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMV5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMV5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMV5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMV5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMV5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMV5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMV5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMV9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMV9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMV9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMV9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMV9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMV9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMV9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMV9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMY13W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBMY13W3PNM . . . . . . . . . . . . . . . . . . . . . 188
DBMY13W3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DBMY13W3SNM . . . . . . . . . . . . . . . . . . . . . 189
DBMY17W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBMY17W2PNM . . . . . . . . . . . . . . . . . . . . . 188
DBMY17W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
DBMY17W2SNM . . . . . . . . . . . . . . . . . . . . . 189
DBMY21W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DBMY21W1PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBMY21W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DCJK37P*-1AWN . . . . . . . . . . . . . . . . . . . . . 116
DCJK37P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108
DCJK37P*-1U7N . . . . . . . . . . . . . . . . . . . . . 112
DCJK37P*-1U7N-146 . . . . . . . . . . . . . . . . . . 112
DCJK37P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DCJK37S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111
DCJK37S*-1A5N . . . . . . . . . . . . . . . . . . . . . 119
DCJK37S*-1A6N . . . . . . . . . . . . . . . . . . . . . 119
DCJK37S*-1A7N . . . . . . . . . . . . . . . . . . . . . 115
DCJK37S*-1A8N . . . . . . . . . . . . . . . . . . . . . 115
DCJK37S*-1A9N . . . . . . . . . . . . . . . . . . . . . 115
DCJK37S*-1ADN . . . . . . . . . . . . . . . . . . . . . 117
DCJK37S*-1AFN . . . . . . . . . . . . . . . . . . . . . 115
DCJK37S*-1AGN . . . . . . . . . . . . . . . . . . . . . 117
DCJK37S*-1AHN . . . . . . . . . . . . . . . . . . . . . 115
DCJK37S*-1AJN. . . . . . . . . . . . . . . . . . . . . . 117
DCJK37S*-1APN . . . . . . . . . . . . . . . . . . . . . 119
DCJK37S*-1ATN . . . . . . . . . . . . . . . . . . . . . 119
DCJK37S*-1AUN . . . . . . . . . . . . . . . . . . . . . 119
DCJK37S*-1AVN . . . . . . . . . . . . . . . . . . . . . 117
DCJK37S*-1AWN . . . . . . . . . . . . . . . . . . . . . 117
DCJK37S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109
DCJK37S*-1U7N . . . . . . . . . . . . . . . . . . . . . 113
DCJK37S*-1U7N-146 . . . . . . . . . . . . . . . . . . 113
DCJK37S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121
DCJKE37P*-1A0N . . . . . . . . . . . . . . . . . . . . 110
DCJKE37P*-1U0N . . . . . . . . . . . . . . . . . . . . 108
DCJKE37P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DCJKE37P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DCJKE37S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DCJKE37S*-1U0N . . . . . . . . . . . . . . . . . . . . 109
DCJKE37S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121
DCJKE37S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DCJKX37P*-1A0N . . . . . . . . . . . . . . . . . . . . 110
DCJKX37P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DCJKX37P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DCJKX37S*-1A0N . . . . . . . . . . . . . . . . . . . . . 111
DCJKX37S*-OL4 . . . . . . . . . . . . . . . . . . . . . 121
DCJKX37S*-OL4-146 . . . . . . . . . . . . . . . . . . 121
DCJT37P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DCJT37S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DCJTE37P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DCJTE37S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
DCJTX37P . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DCJTX37S* . . . . . . . . . . . . . . . . . . . . . . . . . 123
DCM-13W6P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DCM-13W6P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DCM-13W6P-NMB-76 . . . . . . . . . . . . . . . . . 195
DCM-13W6P-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-13W6P-NMC-76 . . . . . . . . . . . . . . . . . 195
DCM-13W6P-NMC-77 . . . . . . . . . . . . . . . . . 195
DCM-13W6P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DCM-13W6P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DCM-13W6S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DCM-13W6S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DCM-13W6S-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-13W6S-NMC-77 . . . . . . . . . . . . . . . . . 195
DCM-13W6S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DCM-13W6S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DCM-17W5P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DCM-17W5P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DCM-17W5P-NMB-76 . . . . . . . . . . . . . . . . . 195
DCM-17W5P-NMC-76 . . . . . . . . . . . . . . . . . 195
DCM-17W5P-NMC-77 . . . . . . . . . . . . . . . . . 195
DCM-17W5P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DCM-17W5P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DCM-17W5S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DCM-17W5S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DCM-17W5S-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-17W5S-NMC-76 . . . . . . . . . . . . . . . . . 195
DCM-17W5S-NMC-77 . . . . . . . . . . . . . . . . . 195
DCM-17W5S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DCM-17W5S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DCM-21W4P-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-21W4S-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-21WA4P-1A0N-K87. . . . . . . . . . . . . . . . 74
DCM-21WA4P-1A7N-K87. . . . . . . . . . . . . . . . 74
DCM-21WA4P-NMB-77 . . . . . . . . . . . . . . . . 195
DCM-21WA4P-NMC-76 . . . . . . . . . . . . . . . . 195
DCM-21WA4P-OL2-K87 . . . . . . . . . . . . . . . . 76
DCM-21WA4P-OL4-K87 . . . . . . . . . . . . . . . . 76
DCM-21WA4S-1A0N-A197 . . . . . . . . . . . . . . . 75
DCM-21WA4S-1A7N-A197 . . . . . . . . . . . . . . . 75
Part Number
Page
DCM-21WA4S-NMB-77 . . . . . . . . . . . . . . . . 195
DCM-21WA4S-OL2-A197 . . . . . . . . . . . . . . . . 77
DCM-21WA4S-OL4-A197 . . . . . . . . . . . . . . . . 77
DCM-25W36-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-25W3P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DCM-25W3P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DCM-25W3P-NMB-77 . . . . . . . . . . . . . . . . . 195
DCM-25W3P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DCM-25W3P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DCM-25W3S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DCM-25W3S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DCM-25W3S-NMC-76 . . . . . . . . . . . . . . . . . 195
DCM-25W3S-NMC-77 . . . . . . . . . . . . . . . . . 195
DCM-25W3S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DCM-25W3S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DCM-27W2P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DCM-27W2P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DCM-27W2P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DCM-27W2P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DCM-27W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DCM-27W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DCM-27W2S-NMC-76 . . . . . . . . . . . . . . . . . 195
DCM-27W2S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DCM-27W2S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DCM-37P-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DCM-37S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195
DCM-37S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195
DCM-37S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DCM-8W8P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DCM-8W8P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DCM-8W8P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DCM-8W8P-NMC-77 . . . . . . . . . . . . . . . . . . 195
DCM-8W8P-OL2-K87 . . . . . . . . . . . . . . . . . . 76
DCM-8W8P-OL4-K87 . . . . . . . . . . . . . . . . . . 76
DCM-8W8S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DCM-8W8S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DCM-8W8S-MNC-76 . . . . . . . . . . . . . . . . . . 195
DCM-8W8S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DCM-8W8S-NMC-77 . . . . . . . . . . . . . . . . . . 195
DCM-8W8S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DCM-8W8S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DCM13W6P1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6P1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6P1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6PF179ANMBK52 . . . . . . . . . . . . . 195
DCM13W6PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DCM13W6PNM . . . . . . . . . . . . . . . . . . . . . . 188
DCM13W6PNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM13W6POL3NMBK52 . . . . . . . . . . . . . . . 195
DCM13W6S1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6S1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6S1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM13W6SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCM13W6SF179ANMBK52 . . . . . . . . . . . . . 195
DCM13W6SNM . . . . . . . . . . . . . . . . . . . . . . 189
DCM13W6SNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM13W6SNMC76 . . . . . . . . . . . . . . . . . . . 195
DCM13W6SOL3NMBK52 . . . . . . . . . . . . . . . 195
DCM17W5P1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5P1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5P1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5PF179ANMBK52 . . . . . . . . . . . . . 195
DCM17W5PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DCM17W5PNM . . . . . . . . . . . . . . . . . . . . . . 188
DCM17W5PNMB77 . . . . . . . . . . . . . . . . . . . 195
DCM17W5PNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM17W5POL3NMBK52 . . . . . . . . . . . . . . . 195
DCM17W5S-NMB-76 . . . . . . . . . . . . . . . . . . 195
DCM17W5S1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5S1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5S1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM17W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCM17W5SF179ANMBK52 . . . . . . . . . . . . . 195
DCM17W5SNM . . . . . . . . . . . . . . . . . . . . . . 189
DCM17W5SNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM17W5SOL3NMBK52 . . . . . . . . . . . . . . . 195
DCM21W4S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DCM21WA4P-NMB-76 . . . . . . . . . . . . . . . . . 195
DCM21WA4P1A0NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4P1A7NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4P1A9NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4PF179ANMBK52 . . . . . . . . . . . . 195
DCM21WA4PK87 . . . . . . . . . . . . . . . . . . . . . . 78
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DC111808-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DC111808-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DC115339-23 . . . . . . . . . . . . . . . . . . . . . . . 205
DC115339-3 . . . . . . . . . . . . . . . . . . . . . . . . 207
DC115386-100A . . . . . . . . . . . . . . . . . . . . . . 195
DC115386-4B . . . . . . . . . . . . . . . . . . . . . . . 207
DC121073-152 . . . . . . . . . . . . . . . . . . . . . . . 200
DC121073-52 . . . . . . . . . . . . . . . . . . . . . . . 200
DC19678-138 . . . . . . . . . . . . . . . . . . . . 193, 195
DC19678-162 . . . . . . . . . . . . . . . . . . . . . . . . 195
DC19678-173 . . . . . . . . . . . . . . . . . . . . . . . . 195
DC19678-3 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DC19977-3 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DC19977-45 . . . . . . . . . . . . . . . . . . . . . 193, 195
DC20963 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DC20963-17 . . . . . . . . . . . . . . . . . . . . . . . . 192
DC22070 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
DC22071 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
DC24660 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DC24660-16 . . . . . . . . . . . . . . . . . . . . . 192, 195
DC37P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . 10
DC37P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DC37P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DC37P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DC37P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DC37P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DC37P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DC37P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22
DC37P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DC37P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20
DC37P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DC37P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DC37P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DC37P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DC37P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12
DC37PK87. . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DC37S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11
DC37S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27
DC37S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27
DC37S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23
DC37S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23
DC37S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23
DC37S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25
DC37S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . 23
DC37S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . 25
DC37S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21
DC37S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27
DC37S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27
DC37S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25
DC37S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25
DC37S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13
DC37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DC50907-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DC51214 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DC51215 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DC51222-1. . . . . . . . . . . . . . . . . . . . . . . . . . 210
DC53750-3 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DCA21WA4PK87F0 . . . . . . . . . . . . . . . . . . . . 80
DCA21WA4SA197F0 . . . . . . . . . . . . . . . . . . . 81
DCA25W3PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DCA37PK87FO . . . . . . . . . . . . . . . . . . . . . . . 36
DCA37SA197FO . . . . . . . . . . . . . . . . . . . . . . . 37
DCA8W8PK87F0 . . . . . . . . . . . . . . . . . . . . . . 80
DCA8W8SA197F0 . . . . . . . . . . . . . . . . . . . . . 81
DCE37P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DCE37PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DCE37S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DCE37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DCJK37P*-1A0N . . . . . . . . . . . . . . . . . . . . . 110
DCJK37P*-1A5N . . . . . . . . . . . . . . . . . . . . . 118
DCJK37P*-1A6N . . . . . . . . . . . . . . . . . . . . . 118
DCJK37P*-1A7N . . . . . . . . . . . . . . . . . . . . . 114
DCJK37P*-1A8N . . . . . . . . . . . . . . . . . . . . . 114
DCJK37P*-1A9N . . . . . . . . . . . . . . . . . . . . . 114
DCJK37P*-1ADN . . . . . . . . . . . . . . . . . . . . . 116
DCJK37P*-1AFN. . . . . . . . . . . . . . . . . . . . . . 114
DCJK37P*-1AGN . . . . . . . . . . . . . . . . . . . . . 116
DCJK37P*-1AHN . . . . . . . . . . . . . . . . . . . . . 114
DCJK37P*-1AJN. . . . . . . . . . . . . . . . . . . . . . 116
DCJK37P*-1APN . . . . . . . . . . . . . . . . . . . . . 118
DCJK37P*-1ATN . . . . . . . . . . . . . . . . . . . . . 118
DCJK37P*-1AUN . . . . . . . . . . . . . . . . . . . . . 118
DCJK37P*-1AVN . . . . . . . . . . . . . . . . . . . . . 116
Reader’s
Part Number
Page
DBMY21W1SNM . . . . . . . . . . . . . . . . . . . . . . 189
DBMY25P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DBMY25PNM . . . . . . . . . . . . . . . . . . . . . . . . 180
DBMY25PNM*1AON. . . . . . . . . . . . . . . . . . . 176
DBMY25POL3NM . . . . . . . . . . . . . . . . . . . . . 172
DBMY25S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DBMY25SNM . . . . . . . . . . . . . . . . . . . . . . . . 181
DBMY25SNM*1AON. . . . . . . . . . . . . . . . . . . 177
DBMY25SOL3NM . . . . . . . . . . . . . . . . . . . . . 173
DBMY5W5PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DBMY5W5PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBMY5W5SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBMY5W5SNM . . . . . . . . . . . . . . . . . . . . . . 189
DBMY9W4PK87. . . . . . . . . . . . . . . . . . . . . . . 78
DBMY9W4PNM . . . . . . . . . . . . . . . . . . . . . . 188
DBMY9W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DBMY9W4SNM . . . . . . . . . . . . . . . . . . . . . . 189
DBMZ13C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMZ13C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMZ13C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMZ13C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMZ13H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMZ13H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMZ13H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMZ13H3SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMZ17C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMZ17C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMZ17C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DBMZ17C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DBMZ17H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMZ17H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMZ17H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMZ17H2SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMZ21C1PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DBMZ21C1PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DBMZ21C1SNA197. . . . . . . . . . . . . . . . . . . . . 53
DBMZ21C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMZ21H1PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DBMZ21H1PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DBMZ21H1SNA197 . . . . . . . . . . . . . . . . . . . . 67
DBMZ21H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMZ25PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DBMZ25SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DBMZ5C5PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMZ5C5PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMZ5C5SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMZ5C5SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMZ5H5PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMZ5H5PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMZ5H5SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMZ5H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBMZ9C4PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DBMZ9C4PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DBMZ9C4SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DBMZ9C4SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DBMZ9H4PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DBMZ9H4PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DBMZ9H4SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DBMZ9H4SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DBNG25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DBNG25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DBNGE25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DBNGE25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DBNGL25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DBNGL25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DBNGX25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DBNGX25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DBNGZ25P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DBNGZ25S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DBW25P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DBW25P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DBW25S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DBW25S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DBWE25P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DBWE25P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38
DBWE25S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DBWE25S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39
DBX25P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DBX25PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DBX25S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DBX25SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DC-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DC-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
Part Number Index
289
Reader’s
Resource
D Subminiature
290
Part Number
Page
DCM21WA4PNM . . . . . . . . . . . . . . . . . . . . . 188
DCM21WA4PNMBK52 . . . . . . . . . . . . . . . . . 195
DCM21WA4POL3NMBK52 . . . . . . . . . . . . . . 195
DCM21WA4S-NMB-76 . . . . . . . . . . . . . . . . . 195
DCM21WA4S1A0NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4S1A7NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4S1A9NNMBK52 . . . . . . . . . . . . . 195
DCM21WA4SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCM21WA4SF179ANMBK52 . . . . . . . . . . . . 195
DCM21WA4SNM . . . . . . . . . . . . . . . . . . . . . 189
DCM21WA4SNMBK52 . . . . . . . . . . . . . . . . . 195
DCM21WA4SOL3NMBK52 . . . . . . . . . . . . . . 195
DCM25W3P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DCM25W3P1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3P1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3P1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3PF179ANMBK52 . . . . . . . . . . . . . 195
DCM25W3PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCM25W3PNM . . . . . . . . . . . . . . . . . . . . . . 188
DCM25W3PNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM25W3POL3NMBK52 . . . . . . . . . . . . . . . 195
DCM25W3S1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3S1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3S1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM25W3SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCM25W3SF179ANMBK52 . . . . . . . . . . . . . 195
DCM25W3SNM . . . . . . . . . . . . . . . . . . . . . . 189
DCM25W3SNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM25W3SOL3NMBK52 . . . . . . . . . . . . . . . 195
DCM27W2OL3NMBK52 . . . . . . . . . . . . . . . . 195
DCM27W2P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DCM27W2P1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2P1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2P1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2PF179ANMBK52 . . . . . . . . . . . . . 195
DCM27W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCM27W2PNM . . . . . . . . . . . . . . . . . . . . . . 188
DCM27W2PNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM27W2POL3NMBK52 . . . . . . . . . . . . . . . 195
DCM27W2S1A0NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2S1A7NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2S1A9NNMBK52 . . . . . . . . . . . . . . 195
DCM27W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCM27W2SF179ANMBK52 . . . . . . . . . . . . . 195
DCM27W2SNM . . . . . . . . . . . . . . . . . . . . . . 189
DCM27W2SNMBK52 . . . . . . . . . . . . . . . . . . 195
DCM37P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCM37P1A0NNMBK52 . . . . . . . . . . . . . . . . 195
DCM37P1A7NNMBK52 . . . . . . . . . . . . . . . . 195
DCM37P1A9NNMBK52 . . . . . . . . . . . . . . . . 195
DCM37PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM37PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM37PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138
DCM37PF179A . . . . . . . . . . . . . . . . . . . . . . . 138
DCM37PF179ANMBK52 . . . . . . . . . . . . . . . . 195
DCM37PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM37PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174
DCM37PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180
DCM37PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178
DCM37PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178
DCM37PNM*1AON . . . . . . . . . . . . . . . . . . . 176
DCM37PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195
DCM37PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DCM37PNMBK52. . . . . . . . . . . . . . . . . . . . . 195
DCM37PNMC76 . . . . . . . . . . . . . . . . . . . . . . 195
DCM37POL3NM . . . . . . . . . . . . . . . . . . . . . . 172
DCM37POL3NMBK52 . . . . . . . . . . . . . . . . . 195
DCM37PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM37PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM37PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCM37PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCM37S. . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCM37S1A0NNMBK52 . . . . . . . . . . . . . . . . 195
Part Number Index
Part Number
Page
DCM37S1A7NNMBK52 . . . . . . . . . . . . . . . . 195
DCM37S1A9NNMBK52 . . . . . . . . . . . . . . . . 195
DCM37SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM37SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCM37SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM37SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCM37SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139
DCM37SF179A . . . . . . . . . . . . . . . . . . . . . . . 139
DCM37SF179ANMBK52 . . . . . . . . . . . . . . . . 195
DCM37SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM37SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCM37SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175
DCM37SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM37SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181
DCM37SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179
DCM37SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179
DCM37SNM*1AON . . . . . . . . . . . . . . . . . . . 177
DCM37SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DCM37SNMBK52. . . . . . . . . . . . . . . . . . . . . 195
DCM37SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173
DCM37SOL3NMBK52 . . . . . . . . . . . . . . . . . 195
DCM37SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCM37SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCM37SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCM37SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM37SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCM50PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCM8W8PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DCM8W8PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DCM8W8PNMB76 . . . . . . . . . . . . . . . . . . . . 195
DCM8W8PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DCM8W8PNMC76 . . . . . . . . . . . . . . . . . . . . 195
DCM8W8SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DCM8W8SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DCM8W8SNMB76 . . . . . . . . . . . . . . . . . . . . 195
DCM8W8SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DCMA37PNM . . . . . . . . . . . . . . . . . . . . . . . . 182
DCMA37PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DCMA37SNM . . . . . . . . . . . . . . . . . . . . . . . . 183
DCMA37SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DCMA62PNM . . . . . . . . . . . . . . . . . . . . . . . . 184
DCMA62SNM . . . . . . . . . . . . . . . . . . . . . . . . 185
DCMAY37PNM . . . . . . . . . . . . . . . . . . . . . . . 182
DCMAY37SNM . . . . . . . . . . . . . . . . . . . . . . . 183
DCMAY62PNM . . . . . . . . . . . . . . . . . . . . . . . 184
DCMAY62SNM . . . . . . . . . . . . . . . . . . . . . . . 185
DCMB-17W5S-NMB-76 . . . . . . . . . . . . . . . . 195
DCMB-37S-NMB-77 . . . . . . . . . . . . . . . . . . . 195
DCMB-37S-NMC-77. . . . . . . . . . . . . . . . . . . 195
DCMB37S-NMB-76 . . . . . . . . . . . . . . . . . . . 195
DCMB37S-NMC-76 . . . . . . . . . . . . . . . . . . . 195
DCMC13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMC13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMC13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMC13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMC13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMC13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMC13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMC13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMC17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMC17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMC17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMC17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMC17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMC17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMC17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMC17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMC21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44
DCMC21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50
DCMC21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45
DCMC21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51
DCMC21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60
DCMC21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61
DCMC21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64
DCMC21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65
DCMC25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMC25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMC25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
Part Number
Page
DCMC25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMC25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMC25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMC25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMC25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMC27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMC27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMC27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMC27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMC27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMC27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMC27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMC27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMC37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DCMC37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DCMC8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DCMC8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DCMC8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DCMC8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DCMC8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DCMC8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMC8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DCMC8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DCMD13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMD13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMD13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMD13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMD13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMD13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMD13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMD13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMD17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMD17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMD17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMD17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMD17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMD17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMD17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMD17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMD21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44
DCMD21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50
DCMD21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45
DCMD21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51
DCMD21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60
DCMD21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61
DCMD21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64
DCMD21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65
DCMD25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMD25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMD25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMD25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMD25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMD25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMD25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMD25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMD27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMD27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMD27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMD27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMD27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMD27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMD27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMD27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMD37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DCMD37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DCMD8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DCMD8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DCMD8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DCMD8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DCMD8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DCMD8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMD8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DCMD8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DCME13W6PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCME13W6SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCME17W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCME17W5SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCME21WA4PK87 . . . . . . . . . . . . . . . . . . . . . 78
DCME21WA4SA197 . . . . . . . . . . . . . . . . . . . . 79
DCME25W3PK87. . . . . . . . . . . . . . . . . . . . . . 78
DCME25W3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCME27W2PK87. . . . . . . . . . . . . . . . . . . . . . 78
DCME27W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
Part Number
Page
DCME37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCME37S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCME8W8PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCME8W8SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCMG13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMG13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMG13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMG13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMG13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMG13H6SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMG13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMG13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMG17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMG17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMG17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMG17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMG17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMG17H5SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMG17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMG17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMG21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44
DCMG21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50
DCMG21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45
DCMG21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51
DCMG21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60
DCMG21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61
DCMG21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64
DCMG21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65
DCMG25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMG25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMG25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMG25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMG25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMG25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMG25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMG25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMG27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMG27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMG27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMG27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMG27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMG27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMG27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMG27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMG37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DCMG37SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DCMG8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DCMG8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DCMG8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DCMG8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DCMG8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DCMG8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMG8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DCMG8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DCMM13W6P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMM13W6S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM17W5P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMM17W5S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM21WA4P . . . . . . . . . . . . . . . . . . . . . . 166
DCMM21WA4S . . . . . . . . . . . . . . . . . . . . . . 167
DCMM24W7S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM25W3P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMM25W3S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM27W2P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMM27W2S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM36W4S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCMM37PA . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCMM37PB . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37PC . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCMM37PD . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCMM37PE . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37PF . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCMM37PF179 . . . . . . . . . . . . . . . . . . . . . . 138
DCMM37PF179A . . . . . . . . . . . . . . . . . . . . . 138
DCMM37PG . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCMM37PH . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37PK . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCMM37PL . . . . . . . . . . . . . . . . . . . . . . . . . 132
DCMM37PM . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37PP . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCMM37PR . . . . . . . . . . . . . . . . . . . . . . . . . 134
DCMM37PS . . . . . . . . . . . . . . . . . . . . . . . . . 132
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DCMMP25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMP25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMP25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMP27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMP27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMP27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMP27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMP8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DCMMP8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DCMMP8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DCMMP8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DCMMV13C6PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMV13C6SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMV13H6PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMV13H6SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMV13V6PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMV13V6SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMV17C5PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMV17C5SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMV17H5PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMV17H5SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMV17V5PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMV17V5SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMV21CA4PN . . . . . . . . . . . . . . . . . . . . . 150
DCMMV21CA4SN . . . . . . . . . . . . . . . . . . . . . 151
DCMMV21HA4PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMV21HA4SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMV21VA4PN . . . . . . . . . . . . . . . . . . . . . 162
DCMMV21VA4SN . . . . . . . . . . . . . . . . . . . . . 163
DCMMV25C3PN. . . . . . . . . . . . . . . . . . . . . . 150
DCMMV25C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMV25H3PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMV25H3SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMV25V3PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMV25V3SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMV27C2PN. . . . . . . . . . . . . . . . . . . . . . 150
DCMMV27C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMV27H2PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMV27H2SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMV27V2PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMV27V2SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMV8C8PN. . . . . . . . . . . . . . . . . . . . . . . 150
DCMMV8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151
DCMMV8H8PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMV8H8SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMV8V8PN . . . . . . . . . . . . . . . . . . . . . . . 162
DCMMV8V8SN . . . . . . . . . . . . . . . . . . . . . . . 163
DCMMY13W6P . . . . . . . . . . . . . . . . . . . . . . 166
DCMMY13W6S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY17W5P . . . . . . . . . . . . . . . . . . . . . . 166
DCMMY17W5S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY21WA4P . . . . . . . . . . . . . . . . . . . . . 166
DCMMY21WA4S . . . . . . . . . . . . . . . . . . . . . 167
DCMMY24W7S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY25W3P . . . . . . . . . . . . . . . . . . . . . . 166
DCMMY25W3S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY27W2P . . . . . . . . . . . . . . . . . . . . . . 166
DCMMY27W2S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY36W4S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY37P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCMMY37S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCMMY43W2S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY47W1S . . . . . . . . . . . . . . . . . . . . . . 167
DCMMY8W8P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMMY8W8S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMMZ13C6PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ13C6SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ13H6PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ13H6SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ13V6PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ13V6SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMZ17C5PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ17C5SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ17H5PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ17H5SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ17V5PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ17V5SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMZ21CA4PN . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ21CA4SN . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ21HA4PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ21HA4SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ21VA4PN . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ21VA4SN . . . . . . . . . . . . . . . . . . . . . 163
Part Number
Page
DCMMZ25C3PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ25C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ25H3PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ25H3SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ25V3PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ25V3SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMZ27C2PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ27C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ27H2PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ27H2SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ27V2PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ27V2SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMZ8C8PN . . . . . . . . . . . . . . . . . . . . . . . 150
DCMMZ8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151
DCMMZ8H8PN . . . . . . . . . . . . . . . . . . . . . . . 158
DCMMZ8H8SN . . . . . . . . . . . . . . . . . . . . . . . 159
DCMMZ8V8PN . . . . . . . . . . . . . . . . . . . . . . . 162
DCMMZ8V8SN . . . . . . . . . . . . . . . . . . . . . . . 163
DCMN13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMN13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMN13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMN13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMN13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMN13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMN13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMN13H6SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMN17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMN17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMN17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMN17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMN17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMN17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMN17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMN17H5SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMN21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52
DCMN21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56
DCMN21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53
DCMN21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57
DCMN21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66
DCMN21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70
DCMN21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67
DCMN21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71
DCMN25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMN25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMN25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMN25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMN25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMN25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMN25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMN25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMN27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMN27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMN27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMN27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMN27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMN27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMN27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMN27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMN37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DCMN37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DCMN8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DCMN8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DCMN8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DCMN8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DCMN8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DCMN8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DCMN8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DCMN8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DCMP13C6PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMP13C6PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMP13C6SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMP13C6SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMP13H6PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMP13H6SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMP13P6PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMP13P6SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMP17C5PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMP17C5PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMP17C5SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMP17C5SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMP17H5PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMP17H5SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMP17P5PVK87 . . . . . . . . . . . . . . . . . . . . . 64
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DCMME25W3S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME27W2P . . . . . . . . . . . . . . . . . . . . . . 166
DCMME27W2S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME36W4S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME37P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCMME37S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCMME43W2S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME47W1S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME8W8P . . . . . . . . . . . . . . . . . . . . . . . 166
DCMME8W8S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMMG13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMG13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMG13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMG13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMG17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMG17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMG17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMG17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMG21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146
DCMMG21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147
DCMMG21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154
DCMMG21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155
DCMMG25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMG25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMG25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMG25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMG27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMG27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMG27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMG27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMG8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DCMMG8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DCMMG8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DCMMG8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DCMMN13C6PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMN13C6SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMN13H6PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMN13H6SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMN13V6PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMN13V6SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMN17C5PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMN17C5SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMN17H5PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMN17H5SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMN17V5PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMN17V5SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMN21CA4PN. . . . . . . . . . . . . . . . . . . . . 150
DCMMN21CA4SN . . . . . . . . . . . . . . . . . . . . . 151
DCMMN21HA4PN . . . . . . . . . . . . . . . . . . . . 158
DCMMN21HA4SN . . . . . . . . . . . . . . . . . . . . 159
DCMMN21VA4PN . . . . . . . . . . . . . . . . . . . . . 162
DCMMN21VA4SN . . . . . . . . . . . . . . . . . . . . . 163
DCMMN25C3PN . . . . . . . . . . . . . . . . . . . . . 150
DCMMN25C3SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMN25H3PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMN25H3SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMN25V3PN . . . . . . . . . . . . . . . . . . . . . 162
DCMMN25V3SN . . . . . . . . . . . . . . . . . . . . . 163
DCMMN27C2PN . . . . . . . . . . . . . . . . . . . . . 150
DCMMN27C2SN . . . . . . . . . . . . . . . . . . . . . . 151
DCMMN27H2PN . . . . . . . . . . . . . . . . . . . . . 158
DCMMN27H2SN . . . . . . . . . . . . . . . . . . . . . 159
DCMMN27V2PN . . . . . . . . . . . . . . . . . . . . . 162
DCMMN27V2SN . . . . . . . . . . . . . . . . . . . . . 163
DCMMN8C8PN . . . . . . . . . . . . . . . . . . . . . . 150
DCMMN8C8SN . . . . . . . . . . . . . . . . . . . . . . . 151
DCMMN8H8PN . . . . . . . . . . . . . . . . . . . . . . 158
DCMMN8H8SN . . . . . . . . . . . . . . . . . . . . . . 159
DCMMN8V8PN . . . . . . . . . . . . . . . . . . . . . . 162
DCMMN8V8SN . . . . . . . . . . . . . . . . . . . . . . 163
DCMMP13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMP13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMP13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMP13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMP17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMP17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMP17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMP17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMP21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146
DCMMP21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147
DCMMP21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154
DCMMP21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155
DCMMP25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
Reader’s
Part Number
Page
DCMM37PW . . . . . . . . . . . . . . . . . . . . . . . . 132
DCMM37PX . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136
DCMM37S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCMM37SA . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SB . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM37SC . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCMM37SD . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SE . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM37SF . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCMM37SF179 . . . . . . . . . . . . . . . . . . . . . . 139
DCMM37SF179A . . . . . . . . . . . . . . . . . . . . . 139
DCMM37SG . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SH . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM37SK . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCMM37SL . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SM . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM37SP . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCMM37SR . . . . . . . . . . . . . . . . . . . . . . . . . 135
DCMM37SS . . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SW . . . . . . . . . . . . . . . . . . . . . . . . 133
DCMM37SX . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM37SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137
DCMM43W2S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM47W1S . . . . . . . . . . . . . . . . . . . . . . . 167
DCMM8W8P . . . . . . . . . . . . . . . . . . . . . . . . 166
DCMM8W8S . . . . . . . . . . . . . . . . . . . . . . . . 167
DCMMC13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMC13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMC13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMC13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMC17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMC17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMC17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMC17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMC21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146
DCMMC21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147
DCMMC21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154
DCMMC21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155
DCMMC25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMC25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMC25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMC25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMC27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMC27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMC27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMC27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMC8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DCMMC8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DCMMC8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DCMMC8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DCMMD13C6PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMD13C6SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMD13H6PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMD13H6SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMD17C5PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMD17C5SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMD17H5PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMD17H5SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMD21CA4PJ . . . . . . . . . . . . . . . . . . . . . 146
DCMMD21CA4SJ . . . . . . . . . . . . . . . . . . . . . 147
DCMMD21HA4PJ . . . . . . . . . . . . . . . . . . . . . 154
DCMMD21HA4SJ . . . . . . . . . . . . . . . . . . . . . 155
DCMMD25C3PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMD25C3SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMD25H3PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMD25H3SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMD27C2PJ . . . . . . . . . . . . . . . . . . . . . . 146
DCMMD27C2SJ . . . . . . . . . . . . . . . . . . . . . . 147
DCMMD27H2PJ . . . . . . . . . . . . . . . . . . . . . . 154
DCMMD27H2SJ . . . . . . . . . . . . . . . . . . . . . . 155
DCMMD8C8PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DCMMD8C8SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DCMMD8H8PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DCMMD8H8SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DCMME13W6P. . . . . . . . . . . . . . . . . . . . . . . 166
DCMME13W6S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME17W5P. . . . . . . . . . . . . . . . . . . . . . . 166
DCMME17W5S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME21WA4P . . . . . . . . . . . . . . . . . . . . . 166
DCMME21WA4S . . . . . . . . . . . . . . . . . . . . . 167
DCMME24W7S . . . . . . . . . . . . . . . . . . . . . . 167
DCMME25W3P . . . . . . . . . . . . . . . . . . . . . . 166
Part Number Index
291
Reader’s
Resource
D Subminiature
292
Part Number
Page
DCMP17P5SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMP21CA4PJK87 . . . . . . . . . . . . . . . . . . . . 44
DCMP21CA4PVK87 . . . . . . . . . . . . . . . . . . . . 50
DCMP21CA4SJA197 . . . . . . . . . . . . . . . . . . . 45
DCMP21CA4SVA197 . . . . . . . . . . . . . . . . . . . 51
DCMP21HA4PJK87 . . . . . . . . . . . . . . . . . . . . 60
DCMP21HA4SJA197 . . . . . . . . . . . . . . . . . . . 61
DCMP21PA4PVK87 . . . . . . . . . . . . . . . . . . . . 64
DCMP21PA4SVA197 . . . . . . . . . . . . . . . . . . . 65
DCMP25C3PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMP25C3PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMP25C3SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMP25C3SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMP25H3PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMP25H3SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMP25P3PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMP25P3SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMP27C2PJK87 . . . . . . . . . . . . . . . . . . . . . 44
DCMP27C2PVK87 . . . . . . . . . . . . . . . . . . . . . 50
DCMP27C2SJA197 . . . . . . . . . . . . . . . . . . . . 45
DCMP27C2SVA197 . . . . . . . . . . . . . . . . . . . . 51
DCMP27H2PJK87 . . . . . . . . . . . . . . . . . . . . . 60
DCMP27H2SJA197 . . . . . . . . . . . . . . . . . . . . 61
DCMP27P2PVK87 . . . . . . . . . . . . . . . . . . . . . 64
DCMP27P2SVA197 . . . . . . . . . . . . . . . . . . . . 65
DCMP37PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DCMP37SJA197. . . . . . . . . . . . . . . . . . . . . . . 17
DCMP8C8PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DCMP8C8PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DCMP8C8SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DCMP8C8SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DCMP8H8PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DCMP8H8SJA197 . . . . . . . . . . . . . . . . . . . . . 61
DCMP8P8PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DCMP8P8SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DCMV13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMV13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMV13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMV13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMV13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMV13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMV13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMV13H6SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMV17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMV17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMV17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMV17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMV17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMV17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMV17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMV17H5SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMV21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52
DCMV21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56
DCMV21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53
DCMV21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57
DCMV21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66
DCMV21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70
DCMV21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67
DCMV21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71
DCMV25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMV25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMV25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMV25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMV25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMV25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMV25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMV25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMV27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMV27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMV27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMV27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMV27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMV27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMV27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMV27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMV37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DCMV37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DCMV8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DCMV8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DCMV8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DCMV8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DCMV8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DCMV8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
Part Number Index
Part Number
Page
DCMV8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DCMV8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DCMY13W6PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCMY13W6PNM . . . . . . . . . . . . . . . . . . . . . 188
DCMY13W6SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCMY13W6SNM . . . . . . . . . . . . . . . . . . . . . 189
DCMY17W5PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCMY17W5PNM . . . . . . . . . . . . . . . . . . . . . 188
DCMY17W5SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCMY17W5SNM . . . . . . . . . . . . . . . . . . . . . 189
DCMY21WA4PK87 . . . . . . . . . . . . . . . . . . . . . 78
DCMY21WA4PNM . . . . . . . . . . . . . . . . . . . . 188
DCMY21WA4SA197 . . . . . . . . . . . . . . . . . . . . 79
DCMY21WA4SNM . . . . . . . . . . . . . . . . . . . . 189
DCMY25W3PK87 . . . . . . . . . . . . . . . . . . . . . 78
DCMY25W3PNM . . . . . . . . . . . . . . . . . . . . . 188
DCMY25W3SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCMY25W3SNM . . . . . . . . . . . . . . . . . . . . . 189
DCMY27W2PK87 . . . . . . . . . . . . . . . . . . . . . 78
DCMY27W2PNM . . . . . . . . . . . . . . . . . . . . . 188
DCMY27W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
DCMY27W2SNM . . . . . . . . . . . . . . . . . . . . . 189
DCMY37P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DCMY37PNM . . . . . . . . . . . . . . . . . . . . . . . . 180
DCMY37PNM*1AON . . . . . . . . . . . . . . . . . . 176
DCMY37POL3NM . . . . . . . . . . . . . . . . . . . . . 172
DCMY37S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DCMY37SNM . . . . . . . . . . . . . . . . . . . . . . . . 181
DCMY37SNM*1AON . . . . . . . . . . . . . . . . . . 177
DCMY37SOL3NM . . . . . . . . . . . . . . . . . . . . . 173
DCMY8W8PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DCMY8W8PNM . . . . . . . . . . . . . . . . . . . . . . 188
DCMY8W8SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DCMY8W8SNM . . . . . . . . . . . . . . . . . . . . . . 189
DCMZ13C6PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMZ13C6PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMZ13C6SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMZ13C6SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMZ13H6PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMZ13H6PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMZ13H6SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMZ13H6SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DCMZ17C5PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMZ17C5PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMZ17C5SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMZ17C5SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMZ17H5PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMZ17H5PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMZ17H5SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMZ17H5SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DCMZ21CA4PNK87 . . . . . . . . . . . . . . . . . . . . 52
DCMZ21CA4PYK87 . . . . . . . . . . . . . . . . . . . . 56
DCMZ21CA4SNA197 . . . . . . . . . . . . . . . . . . . 53
DCMZ21CA4SYA197 . . . . . . . . . . . . . . . . . . . 57
DCMZ21HA4PNK87 . . . . . . . . . . . . . . . . . . . . 66
DCMZ21HA4PYK87 . . . . . . . . . . . . . . . . . . . . 70
DCMZ21HA4SNA197 . . . . . . . . . . . . . . . . . . . 67
DCMZ21HA4SYA197 . . . . . . . . . . . . . . . . . . . 71
DCMZ25C3PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMZ25C3PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMZ25C3SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMZ25C3SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMZ25H3PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMZ25H3PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMZ25H3SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMZ25H3SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMZ27C2PNK87 . . . . . . . . . . . . . . . . . . . . . 52
DCMZ27C2PYK87 . . . . . . . . . . . . . . . . . . . . . 56
DCMZ27C2SNA197 . . . . . . . . . . . . . . . . . . . . 53
DCMZ27C2SYA197 . . . . . . . . . . . . . . . . . . . . 57
DCMZ27H2PNK87 . . . . . . . . . . . . . . . . . . . . . 66
DCMZ27H2PYK87 . . . . . . . . . . . . . . . . . . . . . 70
DCMZ27H2SNA197 . . . . . . . . . . . . . . . . . . . . 67
DCMZ27H2SYA197 . . . . . . . . . . . . . . . . . . . . 71
DCMZ37PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DCMZ37SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DCMZ8C8PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DCMZ8C8PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DCMZ8C8SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DCMZ8C8SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DCMZ8H8PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DCMZ8H8PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DCMZ8H8SNA197 . . . . . . . . . . . . . . . . . . . . . 67
Part Number
Page
DCMZ8H8SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DCNG37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DCNG37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DCNGE37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DCNGE37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DCNGL37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DCNGL37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DCNGX37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DCNGX37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DCNGZ37P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DCNGZ37S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DCW37P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DCW37P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DCW37S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DCW37S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DCWE37P* . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DCWE37P*G . . . . . . . . . . . . . . . . . . . . . . . . . 38
DCWE37S* . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DCWE37S*G . . . . . . . . . . . . . . . . . . . . . . . . . 39
DCX37P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DCX37PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DCX37S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DCX37SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DD-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DD-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DD115339-24 . . . . . . . . . . . . . . . . . . . . . . . 205
DD115339-4 . . . . . . . . . . . . . . . . . . . . . . . . 207
DD115386-103A . . . . . . . . . . . . . . . . . . . . . . 195
DD121073-153 . . . . . . . . . . . . . . . . . . . . . . . 200
DD121073-53 . . . . . . . . . . . . . . . . . . . . . . . 200
DD19678-161 . . . . . . . . . . . . . . . . . . . . 193, 195
DD19678-172 . . . . . . . . . . . . . . . . . . . . . . . . 195
DD19678-176 . . . . . . . . . . . . . . . . . . . . . . . . 195
DD19678-4 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DD19977-4 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DD19977-44 . . . . . . . . . . . . . . . . . . . . . 193, 195
DD20964 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DD20964-19 . . . . . . . . . . . . . . . . . . . . . . . . 192
DD21961 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
DD21962 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
DD24661 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DD24661-13 . . . . . . . . . . . . . . . . . . . . . 192, 195
DD50908-1 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DD50P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . 10
DD50P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DD50P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . 26
DD50P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DD50P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DD50P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . 22
DD50P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DD50P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . 22
DD50P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DD50P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . 20
DD50P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DD50P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . 26
DD50P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . 24
DD50P-1AWN-K87. . . . . . . . . . . . . . . . . . . . . 24
DD50P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . 12
DD50PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DD50S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . 11
DD50S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . 27
DD50S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . 27
DD50S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . 23
DD50S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . 23
DD50S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . 23
DD50S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . 25
DD50S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . 23
DD50S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . 25
DD50S-1AON-A197 . . . . . . . . . . . . . . . . . . . . 21
DD50S-1ATN-A197 . . . . . . . . . . . . . . . . . . . . 27
DD50S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . 27
DD50S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . 25
DD50S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . 25
DD50S-F179A-A197 . . . . . . . . . . . . . . . . . . . . 13
DD50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DD51216 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DD51217 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DD51223-1. . . . . . . . . . . . . . . . . . . . . . . . . . 210
DD53750-4 . . . . . . . . . . . . . . . . . . . . . . . . . 218
DDA24W7PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DDA24W7SA197F0 . . . . . . . . . . . . . . . . . . . . 81
DDA36W4PK87F0 . . . . . . . . . . . . . . . . . . . . . 80
DDA36W4SA197F0 . . . . . . . . . . . . . . . . . . . . 81
Part Number
Page
DDE50P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DDE50PK87. . . . . . . . . . . . . . . . . . . . . . . . . . 32
DDE50S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DDE50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DDJK50P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DDJKE50P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DDJKE50P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DDJKX50P*-OL4 . . . . . . . . . . . . . . . . . . . . . 120
DDJKX50P*-OL4-146 . . . . . . . . . . . . . . . . . . 120
DDM-24W7P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DDM-24W7P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DDM-24W7P-NMB-77 . . . . . . . . . . . . . . . . . 195
DDM-24W7P-NMC-76 . . . . . . . . . . . . . . . . . 195
DDM-24W7P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DDM-24W7P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DDM-24W7S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DDM-24W7S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DDM-24W7S-NMB-76 . . . . . . . . . . . . . . . . . 195
DDM-24W7S-NMC-76 . . . . . . . . . . . . . . . . . 195
DDM-24W7S-OL2-A197. . . . . . . . . . . . . . . . . 77
DDM-24W7S-OL4-A197. . . . . . . . . . . . . . . . . 77
DDM-36W4P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DDM-36W4P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DDM-36W4P-NMB-77 . . . . . . . . . . . . . . . . . 195
DDM-36W4P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DDM-36W4P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DDM-36W4S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DDM-36W4S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DDM-36W4S-NMB-77 . . . . . . . . . . . . . . . . . 195
DDM-36W4S-NMC-76 . . . . . . . . . . . . . . . . . 195
DDM-36W4S-OL2-A197. . . . . . . . . . . . . . . . . 77
DDM-36W4S-OL4-A197. . . . . . . . . . . . . . . . . 77
DDM-43W2P-1A0N-K87 . . . . . . . . . . . . . . . . 74
DDM-43W2P-1A7N-K87 . . . . . . . . . . . . . . . . 74
DDM-43W2P-OL2-K87 . . . . . . . . . . . . . . . . . 76
DDM-43W2P-OL4-K87 . . . . . . . . . . . . . . . . . 76
DDM-43W2S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DDM-43W2S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DDM-43W2S-NMB-77 . . . . . . . . . . . . . . . . . 195
DDM-43W2S-NMC-76 . . . . . . . . . . . . . . . . . 195
DDM-43W2S-OL2-A197. . . . . . . . . . . . . . . . . 77
DDM-43W2S-OL4-A197. . . . . . . . . . . . . . . . . 77
DDM-47W1P-1A0N-K87 . . . . . . . . . . . . . . . . . 74
DDM-47W1P-1A7N-K87 . . . . . . . . . . . . . . . . . 74
DDM-47W1P-OL2-K87. . . . . . . . . . . . . . . . . . 76
DDM-47W1P-OL4-K87. . . . . . . . . . . . . . . . . . 76
DDM-47W1S-1A0N-A197 . . . . . . . . . . . . . . . . 75
DDM-47W1S-1A7N-A197 . . . . . . . . . . . . . . . . 75
DDM-47W1S-NMC-76 . . . . . . . . . . . . . . . . . 195
DDM-47W1S-OL2-A197 . . . . . . . . . . . . . . . . . 77
DDM-47W1S-OL4-A197 . . . . . . . . . . . . . . . . . 77
DDM-50P-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DDM-50S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195
DDM-50S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DDM24W7P1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7P1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7P1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7PF179ANMBK52 . . . . . . . . . . . . . 195
DDM24W7PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DDM24W7PNM . . . . . . . . . . . . . . . . . . . . . . 188
DDM24W7PNMB76 . . . . . . . . . . . . . . . . . . . 195
DDM24W7PNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM24W7POL3NMBK52 . . . . . . . . . . . . . . . 195
DDM24W7S1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7S1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7S1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM24W7SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DDM24W7SF179ANMBK52 . . . . . . . . . . . . . 195
DDM24W7SNM . . . . . . . . . . . . . . . . . . . . . . 189
DDM24W7SNMB77 . . . . . . . . . . . . . . . . . . . 195
DDM24W7SNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM24W7SOL3NMBK52 . . . . . . . . . . . . . . . 195
DDM36W4P1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM36W4P1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM36W4P1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM36W4PF179ANMBK52 . . . . . . . . . . . . . 195
DDM36W4PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DDM36W4PNM . . . . . . . . . . . . . . . . . . . . . . 188
DDM36W4PNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM36W4POL3NMBK52 . . . . . . . . . . . . . . . 195
DDM36W4S1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM36W4S1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM36W4S1A9NNMBK52 . . . . . . . . . . . . . . 195
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DDME47W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDME50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDME50S. . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDMG24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMG24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMG24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMG24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMG36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMG36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMG36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMG36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMG43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMG43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMG43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMG43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMG47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMG47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMG47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMG47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMG50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DDMG50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DDMM24W7P . . . . . . . . . . . . . . . . . . . . . . . 166
DDMM36W4P . . . . . . . . . . . . . . . . . . . . . . . 166
DDMM43W2P . . . . . . . . . . . . . . . . . . . . . . . 166
DDMM47W1P . . . . . . . . . . . . . . . . . . . . . . . 166
DDMM50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDMM50PA . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PB . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50PC . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDMM50PD . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PE . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50PF . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDMM50PF179 . . . . . . . . . . . . . . . . . . . . . . 138
DDMM50PF179A . . . . . . . . . . . . . . . . . . . . . 138
DDMM50PG . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PH . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50PK . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDMM50PL . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PM . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50PP . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDMM50PR . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDMM50PS . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PW . . . . . . . . . . . . . . . . . . . . . . . . 132
DDMM50PX . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50PZ . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDMM50S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDMM50SA . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SB . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMM50SC . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDMM50SD . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SE . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMM50SF . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDMM50SF179 . . . . . . . . . . . . . . . . . . . . . . 139
DDMM50SF179A . . . . . . . . . . . . . . . . . . . . . 139
DDMM50SG . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SH . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMM50SK . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDMM50SL . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SM . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMM50SP . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDMM50SR . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDMM50SS . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SW . . . . . . . . . . . . . . . . . . . . . . . . 133
DDMM50SX . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMM50SZ . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMMC24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMC24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMC24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMC24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMC36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMC36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMC36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMC36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMC43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMC43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMC43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMC43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMC47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMC47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMC47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMC47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMD24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMD24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149
Part Number
Page
DDMMD24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMD24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMD36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMD36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMD36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMD36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMD43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMD43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMD43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMD43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMD47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMD47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMD47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMD47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMME24W7P . . . . . . . . . . . . . . . . . . . . . . 166
DDMME36W4P . . . . . . . . . . . . . . . . . . . . . . 166
DDMME43W2P . . . . . . . . . . . . . . . . . . . . . . 166
DDMME47W1P . . . . . . . . . . . . . . . . . . . . . . 166
DDMME50P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDMME50S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDMMG24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMG24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMG24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMG24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMG36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMG36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMG36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMG36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMG43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMG43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMG43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMG43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMG47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMG47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMG47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMG47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMN24C7PN . . . . . . . . . . . . . . . . . . . . . 152
DDMMN24C7SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMN24H7PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMN24H7SN. . . . . . . . . . . . . . . . . . . . . . 161
DDMMN24V7PN . . . . . . . . . . . . . . . . . . . . . 164
DDMMN24V7SN . . . . . . . . . . . . . . . . . . . . . 165
DDMMN36C4PN . . . . . . . . . . . . . . . . . . . . . 152
DDMMN36C4SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMN36H4PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMN36H4SN. . . . . . . . . . . . . . . . . . . . . . 161
DDMMN36V4PN . . . . . . . . . . . . . . . . . . . . . 164
DDMMN36V4SN . . . . . . . . . . . . . . . . . . . . . 165
DDMMN43C2PN . . . . . . . . . . . . . . . . . . . . . 152
DDMMN43C2SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMN43H2PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMN43H2SN. . . . . . . . . . . . . . . . . . . . . . 161
DDMMN43V2PN . . . . . . . . . . . . . . . . . . . . . 164
DDMMN43V2SN . . . . . . . . . . . . . . . . . . . . . 165
DDMMN47C1PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMN47C1SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMN47H1PN. . . . . . . . . . . . . . . . . . . . . . 160
DDMMN47H1SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMN47V1PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMN47V1SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMP24C7PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMP24C7SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMP24H7PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMP24H7SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMP36C4PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMP36C4SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMP36H4PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMP36H4SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMP43C2PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMP43C2SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMP43H2PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMP43H2SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMP47C1PJ . . . . . . . . . . . . . . . . . . . . . . 148
DDMMP47C1SJ . . . . . . . . . . . . . . . . . . . . . . 149
DDMMP47H1PJ . . . . . . . . . . . . . . . . . . . . . . 156
DDMMP47H1SJ . . . . . . . . . . . . . . . . . . . . . . 157
DDMMV24C7PN . . . . . . . . . . . . . . . . . . . . . 152
DDMMV24C7SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMV24H7PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMV24H7SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMV24V7PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMV24V7SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMV36C4PN . . . . . . . . . . . . . . . . . . . . . 152
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DDM50SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDM50SF179 . . . . . . . . . . . . . . . . . . . . . . . . 139
DDM50SF179A. . . . . . . . . . . . . . . . . . . . . . . 139
DDM50SF179ANMBK52 . . . . . . . . . . . . . . . . 195
DDM50SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDM50SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDM50SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SLNM . . . . . . . . . . . . . . . . . . . . . . . . 175
DDM50SM . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDM50SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181
DDM50SNM*1A7N . . . . . . . . . . . . . . . . . . . . 179
DDM50SNM*1A9N . . . . . . . . . . . . . . . . . . . . 179
DDM50SNM*1AON . . . . . . . . . . . . . . . . . . . 177
DDM50SNMB76 . . . . . . . . . . . . . . . . . . . . . . 195
DDM50SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DDM50SNMBK52 . . . . . . . . . . . . . . . . . . . . 195
DDM50SOL3NM. . . . . . . . . . . . . . . . . . . . . . 173
DDM50SOL3NMBK52 . . . . . . . . . . . . . . . . . 195
DDM50SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDM50SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDM50SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SW . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDM50SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDMA50PNM . . . . . . . . . . . . . . . . . . . . . . . . 182
DDMA50PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DDMA50SNM . . . . . . . . . . . . . . . . . . . . . . . . 183
DDMA50SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DDMA78PNM . . . . . . . . . . . . . . . . . . . . . . . . 184
DDMA78SNM . . . . . . . . . . . . . . . . . . . . . . . . 185
DDMAY50PNM . . . . . . . . . . . . . . . . . . . . . . . 182
DDMAY50SNM . . . . . . . . . . . . . . . . . . . . . . . 183
DDMAY78PNM . . . . . . . . . . . . . . . . . . . . . . . 184
DDMAY78SNM . . . . . . . . . . . . . . . . . . . . . . . 185
DDMB-247S-NMB-76. . . . . . . . . . . . . . . . . . 195
DDMB-50S-NMB-77. . . . . . . . . . . . . . . . . . . 195
DDMB-50S-NMC-77 . . . . . . . . . . . . . . . . . . 195
DDMB50S-NMB-76 . . . . . . . . . . . . . . . . . . . 195
DDMB50S-NMC-76 . . . . . . . . . . . . . . . . . . . 195
DDMC24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMC24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMC24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMC24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMC36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMC36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMC36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMC36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMC43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMC43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMC43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMC43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMC47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMC47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMC47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMC47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMC50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DDMC50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DDMD24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMD24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMD24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMD24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMD36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMD36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMD36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMD36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMD43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMD43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMD43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMD43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMD47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMD47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMD47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMD47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMD50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DDMD50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DDME24W7PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDME24W7SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDME36W4PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDME36W4SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDME43W2PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDME43W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDME47W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
Reader’s
Part Number
Page
DDM36W4SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DDM36W4SF179ANMBK52 . . . . . . . . . . . . . 195
DDM36W4SNM . . . . . . . . . . . . . . . . . . . . . . 189
DDM36W4SNMB76 . . . . . . . . . . . . . . . . . . . 195
DDM36W4SNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM36W4SOL3NMBK52 . . . . . . . . . . . . . . . 195
DDM43W2P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DDM43W2P1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2P1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2P1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2PF179ANMBK52 . . . . . . . . . . . . . 195
DDM43W2PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DDM43W2PNM . . . . . . . . . . . . . . . . . . . . . . 188
DDM43W2PNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM43W2POL3NMBK52 . . . . . . . . . . . . . . . 195
DDM43W2S1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2S1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2S1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM43W2SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DDM43W2SF179ANMBK52 . . . . . . . . . . . . . 195
DDM43W2SNM . . . . . . . . . . . . . . . . . . . . . . 189
DDM43W2SNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM43W2SOL3NMBK52 . . . . . . . . . . . . . . . 195
DDM47W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DDM47W1P1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1P1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1P1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1PF179ANMBK52 . . . . . . . . . . . . . 195
DDM47W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DDM47W1PNM . . . . . . . . . . . . . . . . . . . . . . 188
DDM47W1PNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM47W1POL3NMBK52 . . . . . . . . . . . . . . . 195
DDM47W1S1A0NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1S1A7NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1S1A9NNMBK52 . . . . . . . . . . . . . . 195
DDM47W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DDM47W1SF179ANMBK52 . . . . . . . . . . . . . 195
DDM47W1SNM . . . . . . . . . . . . . . . . . . . . . . 189
DDM47W1SNMBK52 . . . . . . . . . . . . . . . . . . 195
DDM47W1SOL3NMBK52 . . . . . . . . . . . . . . . 195
DDM50P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDM50P1A0NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50P1A7NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50P1A9NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDM50PF179 . . . . . . . . . . . . . . . . . . . . . . . . 138
DDM50PF179A . . . . . . . . . . . . . . . . . . . . . . . 138
DDM50PF179ANMBK52 . . . . . . . . . . . . . . . . 195
DDM50PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDM50PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PLNM . . . . . . . . . . . . . . . . . . . . . . . . 174
DDM50PM . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180
DDM50PNM*1A7N . . . . . . . . . . . . . . . . . . . . 178
DDM50PNM*1A9N . . . . . . . . . . . . . . . . . . . . 178
DDM50PNM*1AON . . . . . . . . . . . . . . . . . . . 176
DDM50PNMB76 . . . . . . . . . . . . . . . . . . . . . . 195
DDM50PNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DDM50PNMBK52. . . . . . . . . . . . . . . . . . . . . 195
DDM50PNMC76. . . . . . . . . . . . . . . . . . . . . . 195
DDM50POL3NM . . . . . . . . . . . . . . . . . . . . . . 172
DDM50POL3NMBK52 . . . . . . . . . . . . . . . . . 195
DDM50PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDM50PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DDM50PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PW . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DDM50PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DDM50S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDM50S1A0NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50S1A7NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50S1A9NNMBK52 . . . . . . . . . . . . . . . . 195
DDM50SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DDM50SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DDM50SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DDM50SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Part Number Index
293
Reader’s
Resource
D Subminiature
294
Part Number
Page
DDMMV36C4SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMV36H4PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMV36H4SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMV36V4PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMV36V4SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMV43C2PN . . . . . . . . . . . . . . . . . . . . . 152
DDMMV43C2SN . . . . . . . . . . . . . . . . . . . . . 153
DDMMV43H2PN . . . . . . . . . . . . . . . . . . . . . 160
DDMMV43H2SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMV43V2PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMV43V2SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMV47C1PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMV47C1SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMV47H1PN . . . . . . . . . . . . . . . . . . . . . . 160
DDMMV47H1SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMV47V1PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMV47V1SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMY24W7P . . . . . . . . . . . . . . . . . . . . . . 166
DDMMY36W4P . . . . . . . . . . . . . . . . . . . . . . 166
DDMMY43W2P . . . . . . . . . . . . . . . . . . . . . . 166
DDMMY47W1P . . . . . . . . . . . . . . . . . . . . . . 166
DDMMY50P . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDMMY50S . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDMMZ24C7PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMZ24C7SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMZ24H7PN . . . . . . . . . . . . . . . . . . . . . . 160
DDMMZ24H7SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMZ24V7PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMZ24V7SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMZ36C4PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMZ36C4SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMZ36H4PN . . . . . . . . . . . . . . . . . . . . . . 160
DDMMZ36H4SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMZ36V4PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMZ36V4SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMZ43C2PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMZ43C2SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMZ43H2PN . . . . . . . . . . . . . . . . . . . . . . 160
DDMMZ43H2SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMZ43V2PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMZ43V2SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMMZ47C1PN . . . . . . . . . . . . . . . . . . . . . . 152
DDMMZ47C1SN . . . . . . . . . . . . . . . . . . . . . . 153
DDMMZ47H1PN . . . . . . . . . . . . . . . . . . . . . . 160
DDMMZ47H1SN . . . . . . . . . . . . . . . . . . . . . . 161
DDMMZ47V1PN . . . . . . . . . . . . . . . . . . . . . . 164
DDMMZ47V1SN . . . . . . . . . . . . . . . . . . . . . . 165
DDMN24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMN24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMN24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMN24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMN24H7PNK87. . . . . . . . . . . . . . . . . . . . . 68
DDMN24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMN24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMN24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMN36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMN36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMN36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMN36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMN36H4PNK87. . . . . . . . . . . . . . . . . . . . . 68
DDMN36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMN36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMN36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMN43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMN43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMN43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMN43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMN43H2PNK87. . . . . . . . . . . . . . . . . . . . . 68
DDMN43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMN43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMN43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMN47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMN47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMN47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMN47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMN47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMN47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMN47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMN47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMN50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DDMN50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DDMP24C7PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMP24C7SJA197 . . . . . . . . . . . . . . . . . . . . 47
Part Number Index
Part Number
Page
DDMP24H7PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMP24H7SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMP36C4PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMP36C4SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMP36H4PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMP36H4SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMP43C2PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMP43C2SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMP43H2PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMP43H2SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMP47C1PJK87 . . . . . . . . . . . . . . . . . . . . . 46
DDMP47C1SJA197 . . . . . . . . . . . . . . . . . . . . 47
DDMP47H1PJK87 . . . . . . . . . . . . . . . . . . . . . 62
DDMP47H1SJA197 . . . . . . . . . . . . . . . . . . . . 63
DDMP50PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DDMP50SJA197 . . . . . . . . . . . . . . . . . . . . . . 17
DDMV24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMV24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMV24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMV24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMV24H7PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMV24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMV24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMV24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMV36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMV36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMV36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMV36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMV36H4PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMV36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMV36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMV36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMV43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMV43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMV43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMV43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMV43H2PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMV43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMV43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMV43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMV47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMV47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMV47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMV47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMV47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMV47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMV47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMV47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMV50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DDMV50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DDMY24W7PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDMY24W7PNM . . . . . . . . . . . . . . . . . . . . . 188
DDMY24W7SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDMY24W7SNM . . . . . . . . . . . . . . . . . . . . . 189
DDMY36W4PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDMY36W4PNM . . . . . . . . . . . . . . . . . . . . . 188
DDMY36W4SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDMY36W4SNM . . . . . . . . . . . . . . . . . . . . . 189
DDMY43W2PK87 . . . . . . . . . . . . . . . . . . . . . 78
DDMY43W2PNM . . . . . . . . . . . . . . . . . . . . . 188
DDMY43W2SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDMY43W2SNM . . . . . . . . . . . . . . . . . . . . . 189
DDMY47W1PK87 . . . . . . . . . . . . . . . . . . . . . . 78
DDMY47W1PNM . . . . . . . . . . . . . . . . . . . . . 188
DDMY47W1SA197 . . . . . . . . . . . . . . . . . . . . . 79
DDMY47W1SNM . . . . . . . . . . . . . . . . . . . . . 189
DDMY50P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DDMY50PNM . . . . . . . . . . . . . . . . . . . . . . . . 180
DDMY50PNM*1AON . . . . . . . . . . . . . . . . . . 176
DDMY50POL3NM. . . . . . . . . . . . . . . . . . . . . 172
DDMY50S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DDMY50SNM . . . . . . . . . . . . . . . . . . . . . . . . 181
DDMY50SNM*1AON . . . . . . . . . . . . . . . . . . 177
DDMY50SOL3NM. . . . . . . . . . . . . . . . . . . . . 173
DDMZ24C7PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMZ24C7PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMZ24C7SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMZ24C7SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMZ24H7PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMZ24H7PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMZ24H7SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMZ24H7SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMZ36C4PNK87 . . . . . . . . . . . . . . . . . . . . . 54
Part Number
Page
DDMZ36C4PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMZ36C4SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMZ36C4SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMZ36H4PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMZ36H4PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMZ36H4SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMZ36H4SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMZ43C2PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMZ43C2PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMZ43C2SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMZ43C2SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMZ43H2PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMZ43H2PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMZ43H2SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMZ43H2SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMZ47C1PNK87 . . . . . . . . . . . . . . . . . . . . . 54
DDMZ47C1PYK87 . . . . . . . . . . . . . . . . . . . . . 58
DDMZ47C1SNA197 . . . . . . . . . . . . . . . . . . . . 55
DDMZ47C1SYA197 . . . . . . . . . . . . . . . . . . . . 59
DDMZ47H1PNK87 . . . . . . . . . . . . . . . . . . . . . 68
DDMZ47H1PYK87 . . . . . . . . . . . . . . . . . . . . . 72
DDMZ47H1SNA197 . . . . . . . . . . . . . . . . . . . . 69
DDMZ47H1SYA197 . . . . . . . . . . . . . . . . . . . . 73
DDMZ50PNK87 . . . . . . . . . . . . . . . . . . . . . . . . 6
DDMZ50SNA197 . . . . . . . . . . . . . . . . . . . . . . . 7
DDNG50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DDNG50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DDNGE50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DDNGE50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DDNGL50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DDNGL50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DDNGX50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DDNGX50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DDNGZ50P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
DDNGZ50S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
DDX50P-0L2-K87-146 . . . . . . . . . . . . . . . . . . 10
DDX50PK87. . . . . . . . . . . . . . . . . . . . . . . . . . 32
DDX50S-0L2-A197-146 . . . . . . . . . . . . . . . . . 11
DDX50SA197 . . . . . . . . . . . . . . . . . . . . . . . . . 33
DE-59-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DE-60-20 . . . . . . . . . . . . . . . . . . . . . . . 195, 218
DE111805-1 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DE111805-5 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DE111813 . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
DE111813-3 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DE111919 . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
DE111920 . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
DE115339 . . . . . . . . . . . . . . . . . . . . . . . . . . 207
DE115339-20 . . . . . . . . . . . . . . . . . . . . . . . . 205
DE115386-101A . . . . . . . . . . . . . . . . . . . . . . 195
DE115386-1B . . . . . . . . . . . . . . . . . . . . . . . . 207
DE121073-154 . . . . . . . . . . . . . . . . . . . . . . . 200
DE121073-54 . . . . . . . . . . . . . . . . . . . . . . . . 200
DE19977-47 . . . . . . . . . . . . . . . . . . . . . 193, 195
DE19977-5 . . . . . . . . . . . . . . . . . . . . . . . . . 204
DE24657 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DE24657-16 . . . . . . . . . . . . . . . . . . . . . 192, 195
DE44994 . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
DE44994-2 . . . . . . . . . . . . . . . . . . . . . . . . . 192
DE50904-1. . . . . . . . . . . . . . . . . . . . . . . . . . 218
DE51218 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DE51219 . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
DE51224-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 210
DE53750 . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
DE9P-0L2-K87 . . . . . . . . . . . . . . . . . . . . . . . . 10
DE9P-1A5N-K87 . . . . . . . . . . . . . . . . . . . . . . 26
DE9P-1A6N-K87 . . . . . . . . . . . . . . . . . . . . . . 26
DE9P-1A7N-K87 . . . . . . . . . . . . . . . . . . . . . . 22
DE9P-1A8N-K87 . . . . . . . . . . . . . . . . . . . . . . 22
DE9P-1A9N-K87 . . . . . . . . . . . . . . . . . . . . . . 22
DE9P-1ADN-K87 . . . . . . . . . . . . . . . . . . . . . . 24
DE9P-1AFN-K87 . . . . . . . . . . . . . . . . . . . . . . 22
DE9P-1AJN-K87 . . . . . . . . . . . . . . . . . . . . . . 24
DE9P-1AON-K87 . . . . . . . . . . . . . . . . . . . . . . 20
DE9P-1ATN-K87 . . . . . . . . . . . . . . . . . . . . . . 26
DE9P-1AUN-K87 . . . . . . . . . . . . . . . . . . . . . . 26
DE9P-1AVN-K87 . . . . . . . . . . . . . . . . . . . . . . 24
DE9P-1AWN-K87 . . . . . . . . . . . . . . . . . . . . . . 24
DE9P-F179A-K87 . . . . . . . . . . . . . . . . . . . . . . 12
DE9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DE9S-0L2-A197 . . . . . . . . . . . . . . . . . . . . . . . 11
DE9S-1A5N-A197 . . . . . . . . . . . . . . . . . . . . . 27
DE9S-1A6N-A197 . . . . . . . . . . . . . . . . . . . . . 27
Part Number
Page
DE9S-1A7N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DE9S-1A8N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DE9S-1A9N-A197 . . . . . . . . . . . . . . . . . . . . . 23
DE9S-1ADN-A197 . . . . . . . . . . . . . . . . . . . . . 25
DE9S-1AFN-A197 . . . . . . . . . . . . . . . . . . . . . . 23
DE9S-1AJN-A197 . . . . . . . . . . . . . . . . . . . . . . 25
DE9S-1AON-A197. . . . . . . . . . . . . . . . . . . . . . 21
DE9S-1ATN-A197. . . . . . . . . . . . . . . . . . . . . . 27
DE9S-1AUN-A197 . . . . . . . . . . . . . . . . . . . . . 27
DE9S-1AVN-A197 . . . . . . . . . . . . . . . . . . . . . 25
DE9S-1AWN-A197 . . . . . . . . . . . . . . . . . . . . . 25
DE9S-F179A-A197 . . . . . . . . . . . . . . . . . . . . . 13
DE9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DEA9PK87FO. . . . . . . . . . . . . . . . . . . . . . . . . 36
DEA9SA197FO . . . . . . . . . . . . . . . . . . . . . . . . 37
DEBS-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
DEBU111515 . . . . . . . . . . . . . . . . . . . . . . . . . 216
DEE9P-0L2-K87-146 . . . . . . . . . . . . . . . . . . . 10
DEE9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DEE9S-0L2-A197-146 . . . . . . . . . . . . . . . . . . . 11
DEE9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DEJK9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . . 110
DEJK9P*-1A5N. . . . . . . . . . . . . . . . . . . . . . . 118
DEJK9P*-1A6N. . . . . . . . . . . . . . . . . . . . . . . 118
DEJK9P*-1A7N. . . . . . . . . . . . . . . . . . . . . . . 114
DEJK9P*-1A8N. . . . . . . . . . . . . . . . . . . . . . . 114
DEJK9P*-1A9N. . . . . . . . . . . . . . . . . . . . . . . 114
DEJK9P*-1ADN . . . . . . . . . . . . . . . . . . . . . . 116
DEJK9P*-1AFN . . . . . . . . . . . . . . . . . . . . . . . 114
DEJK9P*-1AGN . . . . . . . . . . . . . . . . . . . . . . 116
DEJK9P*-1AHN . . . . . . . . . . . . . . . . . . . . . . 114
DEJK9P*-1AJN . . . . . . . . . . . . . . . . . . . . . . . 116
DEJK9P*-1APN . . . . . . . . . . . . . . . . . . . . . . 118
DEJK9P*-1ATN. . . . . . . . . . . . . . . . . . . . . . . 118
DEJK9P*-1AUN . . . . . . . . . . . . . . . . . . . . . . 118
DEJK9P*-1AVN . . . . . . . . . . . . . . . . . . . . . . 116
DEJK9P*-1AWN . . . . . . . . . . . . . . . . . . . . . . 116
DEJK9P*-1U0N . . . . . . . . . . . . . . . . . . . . . . 108
DEJK9P*-1U7N . . . . . . . . . . . . . . . . . . . . . . 112
DEJK9P*-1U7N-146 . . . . . . . . . . . . . . . . . . . 112
DEJK9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . . 120
DEJK9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . . 111
DEJK9S*-1A5N. . . . . . . . . . . . . . . . . . . . . . . 119
DEJK9S*-1A6N. . . . . . . . . . . . . . . . . . . . . . . 119
DEJK9S*-1A7N. . . . . . . . . . . . . . . . . . . . . . . 115
DEJK9S*-1A8N. . . . . . . . . . . . . . . . . . . . . . . 115
DEJK9S*-1A9N. . . . . . . . . . . . . . . . . . . . . . . 115
DEJK9S*-1ADN . . . . . . . . . . . . . . . . . . . . . . 117
DEJK9S*-1AFN . . . . . . . . . . . . . . . . . . . . . . . 115
DEJK9S*-1AGN . . . . . . . . . . . . . . . . . . . . . . 117
DEJK9S*-1AHN . . . . . . . . . . . . . . . . . . . . . . 115
DEJK9S*-1AJN . . . . . . . . . . . . . . . . . . . . . . . 117
DEJK9S*-1APN . . . . . . . . . . . . . . . . . . . . . . 119
DEJK9S*-1ATN. . . . . . . . . . . . . . . . . . . . . . . 119
DEJK9S*-1AUN . . . . . . . . . . . . . . . . . . . . . . 119
DEJK9S*-1AVN . . . . . . . . . . . . . . . . . . . . . . 117
DEJK9S*-1AWN . . . . . . . . . . . . . . . . . . . . . . 117
DEJK9S*-1U0N . . . . . . . . . . . . . . . . . . . . . . 109
DEJK9S*-1U7N . . . . . . . . . . . . . . . . . . . . . . 113
DEJK9S*-1U7N-146 . . . . . . . . . . . . . . . . . . . 113
DEJK9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . . 121
DEJKE9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . 110
DEJKE9P*-1U0N . . . . . . . . . . . . . . . . . . . . . 108
DEJKE9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DEJKE9P*-OL4-146 . . . . . . . . . . . . . . . . . . . 120
DEJKE9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111
DEJKE9S*-1U0N . . . . . . . . . . . . . . . . . . . . . 109
DEJKE9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121
DEJKE9S*-OL4-146 . . . . . . . . . . . . . . . . . . . 121
DEJKX9P*-1A0N. . . . . . . . . . . . . . . . . . . . . . 110
DEJKX9P*-OL4 . . . . . . . . . . . . . . . . . . . . . . 120
DEJKX9P*-OL4-146 . . . . . . . . . . . . . . . . . . . 120
DEJKX9S*-1A0N . . . . . . . . . . . . . . . . . . . . . . 111
DEJKX9S*-OL4 . . . . . . . . . . . . . . . . . . . . . . 121
DEJKX9S*-OL4-146 . . . . . . . . . . . . . . . . . . . 121
DEJT9P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DEJT9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DEJTE9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DEJTE9S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DEJTX9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
DEJTX9S* . . . . . . . . . . . . . . . . . . . . . . . . . . 123
DEM-5W1P-1A0N-K87 . . . . . . . . . . . . . . . . . . 74
DEM-5W1P-1A7N-K87 . . . . . . . . . . . . . . . . . . 74
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature
Part Number
Page
DEMM5W1P . . . . . . . . . . . . . . . . . . . . . . . . . 166
DEMM5W1S . . . . . . . . . . . . . . . . . . . . . . . . . 167
DEMM9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEMM9PA . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PB . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9PC . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEMM9PD . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PE . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9PF . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEMM9PF179 . . . . . . . . . . . . . . . . . . . . . . . 138
DEMM9PF179A . . . . . . . . . . . . . . . . . . . . . . 138
DEMM9PG . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PH . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9PK . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEMM9PL . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PM. . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9PP . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEMM9PR . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEMM9PS . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PW . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEMM9PX . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9PZ . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEMM9S . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEMM9SA . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SB . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMM9SC . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEMM9SD . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SE . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMM9SF . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEMM9SF179 . . . . . . . . . . . . . . . . . . . . . . . 139
DEMM9SF179A . . . . . . . . . . . . . . . . . . . . . . 139
DEMM9SG . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SH . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMM9SK . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEMM9SL . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SM. . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMM9SP . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEMM9SR . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEMM9SS . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SW . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEMM9SX . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMM9SZ . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMMC5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DEMMC5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DEMMC5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DEMMC5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DEMMD5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DEMMD5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DEMMD5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DEMMD5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DEMME5W1P . . . . . . . . . . . . . . . . . . . . . . . . 166
DEMME5W1S . . . . . . . . . . . . . . . . . . . . . . . . 167
DEMME9P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEMME9S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEMMG5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DEMMG5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DEMMG5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DEMMG5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DEMMN5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150
DEMMN5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151
DEMMN5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158
DEMMN5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159
DEMMN5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162
DEMMN5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163
DEMMP5C1PJ . . . . . . . . . . . . . . . . . . . . . . . 146
DEMMP5C1SJ . . . . . . . . . . . . . . . . . . . . . . . 147
DEMMP5H1PJ . . . . . . . . . . . . . . . . . . . . . . . 154
DEMMP5H1SJ . . . . . . . . . . . . . . . . . . . . . . . 155
DEMMV5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150
DEMMV5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151
DEMMV5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158
DEMMV5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159
DEMMV5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162
DEMMV5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163
DEMMY5W1P . . . . . . . . . . . . . . . . . . . . . . . . 166
DEMMY5W1S . . . . . . . . . . . . . . . . . . . . . . . . 167
DEMMY9P . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEMMY9S . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEMMZ5C1PN . . . . . . . . . . . . . . . . . . . . . . . 150
DEMMZ5C1SN . . . . . . . . . . . . . . . . . . . . . . . 151
DEMMZ5H1PN . . . . . . . . . . . . . . . . . . . . . . . 158
DEMMZ5H1SN . . . . . . . . . . . . . . . . . . . . . . . 159
DEMMZ5V1PN . . . . . . . . . . . . . . . . . . . . . . . 162
Part Number
Page
DEMMZ5V1SN . . . . . . . . . . . . . . . . . . . . . . . 163
DEMN5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DEMN5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DEMN5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DEMN5C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DEMN5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DEMN5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DEMN5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DEMN5H1SYA197 . . . . . . . . . . . . . . . . . . . . . 71
DEMN9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6
DEMN9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7
DEMP5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DEMP5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DEMP5C1SJA197 . . . . . . . . . . . . . . . . . . . . . . 45
DEMP5C1SVA197. . . . . . . . . . . . . . . . . . . . . . 51
DEMP5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DEMP5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61
DEMP5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DEMP5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DEMP9PJK87. . . . . . . . . . . . . . . . . . . . . . . . . 16
DEMP9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17
DEMPPNMB77 . . . . . . . . . . . . . . . . . . . . . . . 195
DEMV5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DEMV5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DEMV5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DEMV5C1SYA197 . . . . . . . . . . . . . . . . . . . . . 57
DEMV5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DEMV5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DEMV5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DEMV5H1SYA197 . . . . . . . . . . . . . . . . . . . . . . 71
DEMV9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6
DEMV9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7
DEMY5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DEMY5W1PNM . . . . . . . . . . . . . . . . . . . . . . 188
DEMY5W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DEMY5W1SNM . . . . . . . . . . . . . . . . . . . . . . 189
DEMY9P . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEMY9PNM . . . . . . . . . . . . . . . . . . . . . . . . . 180
DEMY9PNM*1AON . . . . . . . . . . . . . . . . . . . . 176
DEMY9POL3NM . . . . . . . . . . . . . . . . . . . . . . 172
DEMY9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEMY9SNM . . . . . . . . . . . . . . . . . . . . . . . . . 181
DEMY9SNM*1AON . . . . . . . . . . . . . . . . . . . . 177
DEMY9SOL3NM . . . . . . . . . . . . . . . . . . . . . . 173
DEMZ5C1PNK87 . . . . . . . . . . . . . . . . . . . . . . 52
DEMZ5C1PYK87 . . . . . . . . . . . . . . . . . . . . . . 56
DEMZ5C1SNA197 . . . . . . . . . . . . . . . . . . . . . 53
DEMZ5C1SYA197 . . . . . . . . . . . . . . . . . . . . . . 57
DEMZ5H1PNK87 . . . . . . . . . . . . . . . . . . . . . . 66
DEMZ5H1PYK87 . . . . . . . . . . . . . . . . . . . . . . 70
DEMZ5H1SNA197 . . . . . . . . . . . . . . . . . . . . . 67
DEMZ5H1SYA197 . . . . . . . . . . . . . . . . . . . . . . 71
DEMZ9PNK87 . . . . . . . . . . . . . . . . . . . . . . . . . 6
DEMZ9SNA197 . . . . . . . . . . . . . . . . . . . . . . . . 7
DENG9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DENG9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DENGE9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DENGE9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DENGL9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DENGL9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DENGX9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DENGX9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DENGZ9P-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DENGZ9S-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DEW9P* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DEW9P*G . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DEW9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DEW9S*G . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DEWE9P* . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DEWE9P*G . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DEWE9S* . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DEWE9S*G . . . . . . . . . . . . . . . . . . . . . . . . . . 39
DEX9P-0L2-K87-146 . . . . . . . . . . . . . . . . . . . 10
DEX9PK87 . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DEX9S-0L2-A197-146 . . . . . . . . . . . . . . . . . . . 11
DEX9SA197 . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DM115224-1010A . . . . . . . . . . . . . . . . . 191, 195
DM115224-1020A . . . . . . . . . . . . . . . . . 191, 195
DM115224-1040A . . . . . . . . . . . . . . . . . 191, 195
DM115224-2010A . . . . . . . . . . . . . . . . . 191, 195
DM115224-2020A . . . . . . . . . . . . . . . . . 191, 195
DM115224-2040A . . . . . . . . . . . . . . . . . 191, 195
DM115224-3010 . . . . . . . . . . . . . . . . . . 191, 195
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
Part Number
Page
DEM9SNM . . . . . . . . . . . . . . . . . . . . . . . . . . 181
DEM9SNM*1A7N . . . . . . . . . . . . . . . . . . . . . 179
DEM9SNM*1A9N . . . . . . . . . . . . . . . . . . . . . 179
DEM9SNM*1AON . . . . . . . . . . . . . . . . . . . . . 177
DEM9SNMB77 . . . . . . . . . . . . . . . . . . . . . . . 195
DEM9SNMBK52 . . . . . . . . . . . . . . . . . . . . . . 195
DEM9SNMC76 . . . . . . . . . . . . . . . . . . . . . . . 195
DEM9SOL3NM . . . . . . . . . . . . . . . . . . . . . . . 173
DEM9SOL3NMBK52 . . . . . . . . . . . . . . . . . . . 195
DEM9SP . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEM9SR . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEM9SS . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SW . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SX . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEM9SZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEMA15PNM . . . . . . . . . . . . . . . . . . . . . . . . 184
DEMA15PNMBK47FO . . . . . . . . . . . . . . . . . . 195
DEMA15SNM . . . . . . . . . . . . . . . . . . . . . . . . 185
DEMA15SNMBK47FO . . . . . . . . . . . . . . . . . . 195
DEMA25PNMBK47FO . . . . . . . . . . . . . . . . . . 195
DEMA25SNMBK47FO. . . . . . . . . . . . . . . . . . 195
DEMA37PNMBK47FO . . . . . . . . . . . . . . . . . . 195
DEMA37SNMBK47FO. . . . . . . . . . . . . . . . . . 195
DEMA50PNMBK47FO . . . . . . . . . . . . . . . . . . 195
DEMA50SNMBK47FO. . . . . . . . . . . . . . . . . . 195
DEMA9PNM . . . . . . . . . . . . . . . . . . . . . . . . . 182
DEMA9PNMBK47FO . . . . . . . . . . . . . . . . . . . 195
DEMA9PNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DEMA9SNM . . . . . . . . . . . . . . . . . . . . . . . . . 183
DEMA9SNMBK47FO. . . . . . . . . . . . . . . . . . . 195
DEMA9SNMBK52 . . . . . . . . . . . . . . . . . . . . . 195
DEMAK15PNMBK47FO . . . . . . . . . . . . . . . . . 195
DEMAK15SNMBK47FO . . . . . . . . . . . . . . . . . 195
DEMAK25PNMBK47FO . . . . . . . . . . . . . . . . 195
DEMAK25SNMBK47FO . . . . . . . . . . . . . . . . 195
DEMAK37PNMBK47FO . . . . . . . . . . . . . . . . 195
DEMAK37SNMBK47FO . . . . . . . . . . . . . . . . 195
DEMAK50PNMBK47FO . . . . . . . . . . . . . . . . 195
DEMAK9PNMBK47FO . . . . . . . . . . . . . . . . . 195
DEMAK9SNMBK47FO . . . . . . . . . . . . . . . . . 195
DEMAY15PNM . . . . . . . . . . . . . . . . . . . . . . . 184
DEMAY15SNM . . . . . . . . . . . . . . . . . . . . . . . 185
DEMAY9PNM . . . . . . . . . . . . . . . . . . . . . . . . 182
DEMAY9SNM . . . . . . . . . . . . . . . . . . . . . . . . 183
DEMB-5W1S-NMB-76 . . . . . . . . . . . . . . . . . 195
DEMB-9S-NMC-77 . . . . . . . . . . . . . . . . . . . . 195
DEMB9S-NMB-76 . . . . . . . . . . . . . . . . . . . . 195
DEMB9S-NMC-76 . . . . . . . . . . . . . . . . . . . . 195
DEMB9SNMB77 . . . . . . . . . . . . . . . . . . . . . . 195
DEMC5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DEMC5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DEMC5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DEMC5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DEMC5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DEMC5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61
DEMC5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DEMC5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DEMC9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17
DEMCP9PJK87 . . . . . . . . . . . . . . . . . . . . . . . 16
DEMD5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DEMD5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DEMD5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DEMD5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DEMD5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DEMD5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61
DEMD5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DEMD5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DEMD9PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16
DEMD9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17
DEME5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . 78
DEME5W1SA197 . . . . . . . . . . . . . . . . . . . . . . 79
DEME9P. . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEME9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEMG5C1PJK87 . . . . . . . . . . . . . . . . . . . . . . 44
DEMG5C1PVK87 . . . . . . . . . . . . . . . . . . . . . . 50
DEMG5C1SJA197 . . . . . . . . . . . . . . . . . . . . . 45
DEMG5C1SVA197 . . . . . . . . . . . . . . . . . . . . . 51
DEMG5H1PJK87 . . . . . . . . . . . . . . . . . . . . . . 60
DEMG5H1SJA197 . . . . . . . . . . . . . . . . . . . . . . 61
DEMG5P1PVK87 . . . . . . . . . . . . . . . . . . . . . . 64
DEMG5P1SVA197 . . . . . . . . . . . . . . . . . . . . . 65
DEMG9PJK87 . . . . . . . . . . . . . . . . . . . . . . . . 16
DEMG9SJA197 . . . . . . . . . . . . . . . . . . . . . . . . 17
Reader’s
Part Number
Page
DEM-5W1P-NMB-76 . . . . . . . . . . . . . . . . . . 195
DEM-5W1P-NMB-77 . . . . . . . . . . . . . . . . . . 195
DEM-5W1P-NMC-76 . . . . . . . . . . . . . . . . . . 195
DEM-5W1P-OL2-K87 . . . . . . . . . . . . . . . . . . . 76
DEM-5W1P-OL4-K87 . . . . . . . . . . . . . . . . . . . 76
DEM-5W1S-1A0N-A197 . . . . . . . . . . . . . . . . . 75
DEM-5W1S-1A7N-A197 . . . . . . . . . . . . . . . . . 75
DEM-5W1S-NMB-77 . . . . . . . . . . . . . . . . . . 195
DEM-5W1S-NMC-76 . . . . . . . . . . . . . . . . . . 195
DEM-5W1S-OL2-A197 . . . . . . . . . . . . . . . . . . 77
DEM-5W1S-OL4-A197 . . . . . . . . . . . . . . . . . . 77
DEM-9P-NMB-76 . . . . . . . . . . . . . . . . . . . . . 195
DEM-9S-NMB-76 . . . . . . . . . . . . . . . . . . . . . 195
DEM-9S-NMC-77 . . . . . . . . . . . . . . . . . . . . . 195
DEM5W1P1A0NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1P1A7NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1P1A9NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1PF179ANMBK52 . . . . . . . . . . . . . . . 195
DEM5W1PK87 . . . . . . . . . . . . . . . . . . . . . . . . 78
DEM5W1PNM . . . . . . . . . . . . . . . . . . . . . . . 188
DEM5W1PNMBK52 . . . . . . . . . . . . . . . . . . . 195
DEM5W1POL3NMBK52 . . . . . . . . . . . . . . . . 195
DEM5W1S1A0NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1S1A7NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1S1A9NNMBK52 . . . . . . . . . . . . . . . 195
DEM5W1SA197 . . . . . . . . . . . . . . . . . . . . . . . 79
DEM5W1SF179ANMBK52 . . . . . . . . . . . . . . . 195
DEM5W1SNM . . . . . . . . . . . . . . . . . . . . . . . 189
DEM5W1SNMBK52 . . . . . . . . . . . . . . . . . . . 195
DEM5W1SOL3NMBK52 . . . . . . . . . . . . . . . . 195
DEM9P . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
DEM9P1A0NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9P1A7NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9P1A9NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9PA . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PB . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9PC . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEM9PD . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9PF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEM9PF179 . . . . . . . . . . . . . . . . . . . . . . . . . 138
DEM9PF179A . . . . . . . . . . . . . . . . . . . . . . . . 138
DEM9PF179ANMBK52 . . . . . . . . . . . . . . . . . 195
DEM9PG . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PH . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9PK . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEM9PL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PLNM . . . . . . . . . . . . . . . . . . . . . . . . . 174
DEM9PM . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9PNM . . . . . . . . . . . . . . . . . . . . . . . . . . 180
DEM9PNM*1A7N . . . . . . . . . . . . . . . . . . . . . 178
DEM9PNM*1A9N . . . . . . . . . . . . . . . . . . . . . 178
DEM9PNM*1AON . . . . . . . . . . . . . . . . . . . . . 176
DEM9PNMBK52 . . . . . . . . . . . . . . . . . . . . . . 195
DEM9PNMC76 . . . . . . . . . . . . . . . . . . . . . . . 195
DEM9PNMC77 . . . . . . . . . . . . . . . . . . . . . . . 195
DEM9POL3NM . . . . . . . . . . . . . . . . . . . . . . . 172
DEM9POL3NMBK52 . . . . . . . . . . . . . . . . . . . 195
DEM9PP . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEM9PR . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
DEM9PS . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PW . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DEM9PX . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9PZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
DEM9S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
DEM9S1A0NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9S1A7NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9S1A9NNMBK52 . . . . . . . . . . . . . . . . . . 195
DEM9SA . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SB . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEM9SC . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEM9SD . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SE . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEM9SF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEM9SF179 . . . . . . . . . . . . . . . . . . . . . . . . . 139
DEM9SF179A . . . . . . . . . . . . . . . . . . . . . . . . 139
DEM9SF179ANMBK52 . . . . . . . . . . . . . . . . . 195
DEM9SG . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SH . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DEM9SK . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
DEM9SL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
DEM9SLNM . . . . . . . . . . . . . . . . . . . . . . . . . 175
DEM9SM . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Part Number Index
295
Part Number
Page
DM115224-3010A . . . . . . . . . . . . . . . . . . . . . 191
DM115224-3020 . . . . . . . . . . . . . . . . . . 191, 195
DM115224-3020A . . . . . . . . . . . . . . . . . . . . 191
DM115224-3040 . . . . . . . . . . . . . . . . . . 191, 195
DM115224-3040A . . . . . . . . . . . . . . . . . . . . 191
DM115224-4010 . . . . . . . . . . . . . . . . . . 191, 195
DM115224-4010A . . . . . . . . . . . . . . . . . . . . . 191
DM115224-4020 . . . . . . . . . . . . . . . . . . 191, 195
DM115224-4020A . . . . . . . . . . . . . . . . . . . . 191
DM115224-4040 . . . . . . . . . . . . . . . . . . 191, 195
DM115224-4040A . . . . . . . . . . . . . . . . . . . . 191
DM115740-12 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115740-13 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115740-19 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115740-5036 . . . . . . . . . . . . . . . . . . . . . 195
DM115740-5046 . . . . . . . . . . . . . . . . . . . . . 195
DM115740-5047 . . . . . . . . . . . . . . . . . . . . . 195
DM115741-5032 . . . . . . . . . . . . . . . . . . . . . 195
DM115741-5048 . . . . . . . . . . . . . . . . . . . . . 195
DM115741-7 . . . . . . . . . . . . . . . . . . . . . . . . 195
DM115741-8 . . . . . . . . . . . . . . . . . . . . . . . . 195
DM115742-13 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115742-14 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115742-15 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115742-5028 . . . . . . . . . . . . . . . . . . . . . 195
DM115742-5039 . . . . . . . . . . . . . . . . . . . . . 195
DM115742-5075 . . . . . . . . . . . . . . . . . . . . . 195
DM115743-20 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115743-22 . . . . . . . . . . . . . . . . . . . . . . . 195
DM115743-5040 . . . . . . . . . . . . . . . . . . . . . 195
DM115743-5064 . . . . . . . . . . . . . . . . . . . . . 195
DM130321-3 . . . . . . . . . . . . . . . . . . . . . . . . . 92
DM130338. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130338-1 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM130338-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130339. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130339-1 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM130339-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130340. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130340-1 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM130340-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130341 . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130341-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130341-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130342. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130342-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130342-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130343. . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130343-1 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130343-4 . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM130346-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92
DM130352-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92
DM130358-2 . . . . . . . . . . . . . . . . . . . . . . . . . 92
DM13041-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 191
DM13042-1 . . . . . . . . . . . . . . . . . . . . . . . . . 191
DM13043-1 . . . . . . . . . . . . . . . . . . . . . . . . . 191
DM51155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
DM51155-12 . . . . . . . . . . . . . . . . . . . . . . . . . 94
DM51155-13 . . . . . . . . . . . . . . . . . . . . . . . . . 94
DM51155-5000 . . . . . . . . . . . . . . . . . . . . . . . 91
DM51155-5004 . . . . . . . . . . . . . . . . . . . . . . . 91
DM51155-5005 . . . . . . . . . . . . . . . . . . . . . . 195
DM51155-7 . . . . . . . . . . . . . . . . . . . . . . 91, 195
DM51157 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
DM51157-13 . . . . . . . . . . . . . . . . . . . . . . . . . 94
DM51157-14 . . . . . . . . . . . . . . . . . . . . . . . . . 94
Part Number Index
Part Number
Page
DM51157-5000 . . . . . . . . . . . . . . . . . . . . . . . 91
DM51157-5005. . . . . . . . . . . . . . . . . . . . 91, 195
DM51157-8 . . . . . . . . . . . . . . . . . . . . . . 91, 195
DM53740 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-15 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53740-16 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53740-17 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53740-18 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53740-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-35 . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-36 . . . . . . . . . . . . . . . . . . . . . . . . 190
DM53740-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5000 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5001 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5002 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5005 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5008 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5099 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5100 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5101 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5104 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5105 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5145 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53740-5147 . . . . . . . . . . . . . . . . . . . . . . 190
DM53741. . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-10 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53741-11 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53741-12 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53741-13 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53741-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5000 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5001 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5003 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5004 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5059 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5060 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5062 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53741-5063 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53742 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-16 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53742-17 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53742-18 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53742-19 . . . . . . . . . . . . . . . . . . . . . 86, 195
DM53742-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-36 . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-37 . . . . . . . . . . . . . . . . . . . . . . . . 190
DM53742-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5000 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5001 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5002 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5004 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5006 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5085 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5086 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5089 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5091 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5092 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5126 . . . . . . . . . . . . . . . . . . . . . . . 86
DM53742-5127 . . . . . . . . . . . . . . . . . . . . . . 190
DM53743-16 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53743-17 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53743-18 . . . . . . . . . . . . . . . . . . . . . 87, 195
Part Number
Page
DM53743-19 . . . . . . . . . . . . . . . . . . . . . 87, 195
DM53743-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5000 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5001 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5003 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5004 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5073 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5074 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5076 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-5077 . . . . . . . . . . . . . . . . . . . . . . . 87
DM53743-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DM53744-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM53744-107 . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53744-21 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53744-24 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53744-25 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53744-6 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM53744-62 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53744-63 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53744-64 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53744-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM53744-92 . . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53744-95 . . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53745-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM53745-104 . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53745-107 . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53745-120 . . . . . . . . . . . . . . . . . . . . . . . . 93
DM53745-126 . . . . . . . . . . . . . . . . . . . . . . . . 95
DM53745-25 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53745-27 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53745-28 . . . . . . . . . . . . . . . . . . . . . 90, 191
DM53745-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
DM53745-70 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53745-72 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53745-77 . . . . . . . . . . . . . . . . . . . . . . . . 191
DM53745-8 . . . . . . . . . . . . . . . . . . . . . . . . . . 90
M24308/26-1 . . . . . . . . . . . . . . . . . . . . . . . 209
M24308/26-2 . . . . . . . . . . . . . . . . . . . . . . . 209
M85049/48-1-1 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-1-2 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-1-3 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-1-4 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-1-5 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-2-1 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-2-2 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-2-3 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-2-4 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-2-5 . . . . . . . . . . . . . . . . . . . . . . 203
M85049/48-3-2 . . . . . . . . . . . . . . . . . . . . . . 204
M85049/48-3-3 . . . . . . . . . . . . . . . . . . . . . . 204
M85049/48-3-4 . . . . . . . . . . . . . . . . . . . . . . 204
M85049/48-3-5 . . . . . . . . . . . . . . . . . . . . . . 204
M85049/50-1 . . . . . . . . . . . . . . . . . . . . . . . 204
M85049/50-2 . . . . . . . . . . . . . . . . . . . . . . . 204
M85049/50-3 . . . . . . . . . . . . . . . . . . . . . . . 204
M85049/50-4 . . . . . . . . . . . . . . . . . . . . . . . 204
M85049/50-5 . . . . . . . . . . . . . . . . . . . . . . . 204
MDSM-15PE-Z10-VR22 . . . . . . . . . . . . . . . . . 99
MDSM-15SC-Z11-VS1. . . . . . . . . . . . . . . . . . 100
MDSM-18PE-Z10-VR25 . . . . . . . . . . . . . . . . . 99
MDSM-25PE-Z10-VR17 . . . . . . . . . . . . . . . . . 99
MDSM-25SC-Z11-VS1 . . . . . . . . . . . . . . . . . 100
MDSM-30PE-Z10-VR22 . . . . . . . . . . . . . . . . . 99
MDSM-9PE-Z10-VR25 . . . . . . . . . . . . . . . . . . 99
Part Number
Page
MDSM-9SC-Z11-VS1 . . . . . . . . . . . . . . . . . . 100
ZDA15P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 28
ZDA15P-A191. . . . . . . . . . . . . . . . . . . . . . . . . 34
ZDA15P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZDA15S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 29
ZDA15S-A191. . . . . . . . . . . . . . . . . . . . . . . . . 35
ZDA15S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZDAE15P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 8
ZDAE15S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 9
ZDAL15P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28
ZDAL15S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29
ZDB25P-1AKN-146. . . . . . . . . . . . . . . . . . . . . 28
ZDB25P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34
ZDB25P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZDB25S-1AKN-146. . . . . . . . . . . . . . . . . . . . . 29
ZDB25S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35
ZDB25S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZDBE25P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 8
ZDBE25S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . 9
ZDBL25P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28
ZDBL25S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29
ZDC37P-1AKN-146 . . . . . . . . . . . . . . . . . . . . 28
ZDC37P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34
ZDC37P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZDC37S-1AKN-146 . . . . . . . . . . . . . . . . . . . . 29
ZDC37S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35
ZDC37S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZDCE37P-OL2-146. . . . . . . . . . . . . . . . . . . . . . 8
ZDCE37S-OL2-146. . . . . . . . . . . . . . . . . . . . . . 9
ZDCL37P-1AKN-146. . . . . . . . . . . . . . . . . . . . 28
ZDCL37S-1AKN-146. . . . . . . . . . . . . . . . . . . . 29
ZDD50P-A191 . . . . . . . . . . . . . . . . . . . . . . . . 34
ZDD50P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZDD50S-A191 . . . . . . . . . . . . . . . . . . . . . . . . 35
ZDD50S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZDDE50P-OL2-146 . . . . . . . . . . . . . . . . . . . . . 8
ZDDE50S-OL2-146 . . . . . . . . . . . . . . . . . . . . . 9
ZDE9P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . . 28
ZDE9P-A191. . . . . . . . . . . . . . . . . . . . . . . . . . 34
ZDE9P-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ZDE9S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . . 29
ZDE9S-A191. . . . . . . . . . . . . . . . . . . . . . . . . . 35
ZDE9S-OL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZDEE9P-OL2-146 . . . . . . . . . . . . . . . . . . . . . . . 8
ZDEE9S-OL2-146 . . . . . . . . . . . . . . . . . . . . . . . 9
ZDEL9P-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 28
ZDEL9S-1AKN-146 . . . . . . . . . . . . . . . . . . . . . 29
ZEDA15PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDA15SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDAL15PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDAL15SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDB25PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDB25SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDBL25PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDBL25SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDC37PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDC37SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDCL37PBA . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDCL37SBA . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDE9PBA . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDE9SBA . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ZEDEL9PBA . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZEDEL9SBA . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reader’s
Resource
D Subminiature
296
Dimensions are shown in mm (inch)
Dimensions subject to change
Product Safety Information
THIS NOTE MUST BE READ IN CONJUNCTION
WITH THE PRODUCT DATA SHEET/CATALOG.
FAILURE TO OBSERVE THE ADVICE IN THIS
INFORMATION SHEET AND THE OPERATING
CONDITIONS SPECIFIED IN THE PRODUCT DATA
SHEET/CATALOG
COULD
RESULT
IN
HAZARDOUS SITUATIONS.
1 MATERIAL CONTENT AND PHYSICAL FORM
Electrical connectors do not usually contain
hazardous materials. They contain conducting
and non-conducting materials and can be
divided into two groups.
a) Printed circuit types and low cost audio types
which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types
with metal casings and either natural rubber,
synthetic rubber, plastic or glass insulating
materials. Contact materials vary with type of
connector and also application and are usually
manufactured from either: Copper, copper
alloys, nickel, alumel, chromel or steel. In
special applications, other alloys may be
specified.
4 DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5 APPLICATION
Connectors with exposed contacts should not
be selected for use on the current supply side of
an electrical circuit, because an electric shock
could result from touching exposed contacts on
an unmated connector. Voltages in excess of 30
V ac or 42.5 V dc are potentially hazardous and
care should be taken to ensure that such
voltages cannot be transmitted in any way to
exposed metal parts of the connector body. The
connector and wiring should be checked, before
making live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting paths.
Always use the correct application tools as
specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path data are
only reference values. Observe reduction of air and
creepage paths due to PC board and/or
harnessing.
(ii) Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
(iii) Other important information
ITT Cannon continuously endeavours to improve
their products. Therefore, ITT Cannon products
may deviate from the description, technical data
and shape as shown in this catalog and data
sheets.
Dimensions are shown in mm (inch)
Dimensions subject to change
Resource
ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be
used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating
specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to
create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and
all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under
this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any
kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with
the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively
subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This
publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon
does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its
use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon’s prior consent must be
obtained in all cases.
Reader’s
2 FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of
the connector or careless use of metal tools or
conductive fluids, or transit damage to any of
the component parts may cause electric
shock or burns. Live circuits must not be
broken by separating mated connectors as
this may cause arcing, ionisation and burning.
Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect application
tools or from poor quality soldering or slack
screw terminals. Overheating may occur if the
ratings in the product Data Sheet/Catalog are
exceeded and can cause breakdown of
insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through
loss of temper of spring contacts, formation of
oxide film on contacts and wires and leakage
currents through carbonisation of insulation and
tracking paths. Fire can then result in the
presence of combustible materials and this may
release noxious fumes. Overheating may not be
visually apparent. Burns may result from
touching overheated components.
3 HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors
during installation and use. Although there are
normally no sharp edges, care must be taken
when handling certain components to avoid
injury to fingers.
Electrical connectors may be damaged in transit
to the customers, and damage may result in
creation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
297
297
W E ’ R E
I N
P A R T
O F
I N T E R C O N N E C T
Y O U R
W O R L D
T E C H N O L O G Y
We are focused on your world with Innovation, Experience, Reliability & Responsiveness.
Don’t blink.
T
oday, we serve nearly every
industry in which the increased demand
for reliable and innovative interconnect
No industry in the world moves
faster than electronics. Take a
snapshot of it today, and it all
systems is critical:
។
Computers (Personal computers,
I
portables and peripherals)
។
I
N
N
O
V
A
T
I
O
N
Telecommunications (Network
systems and services/LAN; mobile)
changes by tomorrow.
។
A commitment to concurrent engineering
Transportation (Automobiles, heavy-
helps you reach your markets faster
duty vehicles, rail and mass transit)
When you need to bring your
products to market more quickly,
។
។
you most likely seek a partner who
moves just as fast as you do. A
company at the forefront with the
Military/Aerospace (Commercial and
Let us bring our spirit of innovation to
military aircraft, defense and space)
your world. Experienced engineering
Industrial (Factory automation and
teams located throughout the globe work
instrumentation)
hand-in-hand with our customers. And
since these teams are thoroughly
។
Medical (Diagnostic equipment)
។
Broadcasting
hour-a-day concurrent engineering
។
Consumer Products
capability. These teams advance your
networked together, you benefit from 24
project from initial product concepts to
latest in products and service.
A
t ITT Cannon, we have made it
our business to understand your world.
Or should we say, the many parts of your
world:
។
As ITT Cannon begins our ninth decade
final design and into production.
in business, we are proud to provide our
Our teams are experts in computer-
global and regional customers with the
based design, modeling and analysis to
most reliable electronic products and
assure robust product designs. We are
services available:
also well-versed in performance
។
Interconnects and cable assemblies
simulation, as well as verification of
។
RF connectors
mechanical and electrical properties.
។
Switches and conductive rubber
switchpads
The places in the world where you do
ITT Cannon utilizes Pro/ENGINEER*
software which allows us to develop
products and manufacturing processes
business.
។
Test accessories
concurrently, and to easily evaluate
។
The products you bring to the world.
។
I/O card, memory card and smart
multiple design alternatives. This means
។
The service you require from
card interconnects
better designed products, produced
suppliers to compete in the world.
។
(copper and fiber optic)
At ITT Cannon, we are proud of a
heritage that helped pioneer the
។
electronics industry from its infancy in
the early part of this century, to the
highly advanced technologies of the
present.
Local area network components
Turn-key network systems and
services
។
Customer use tooling
faster and at a lower cost.
ITT Cannon’s Integrated Product
Development process (IPD) allows us to
minimize cycle time for first article and
volume production.
*A trademark of Parametric Technology Corp.
E
X
P
E
I
I
R
I
V
ITT Cannon has also met or exceeded
E
N
C
E
the quality system requirements from all
A
N
I
N
T
O
Y O
U
V
I
T
A
T
I
O
N
customers who have conducted audits.
Worldwide capacity to meet all of your
delivery requirements
We participate in ship-to-stock programs
with many of these customers worldwide
S H
R
W
A
R
E
O
R
L
D
and have received numerous quality and
Our decades of manufacturing
preferred supplier awards from
experience, help us bring the latest
Innovation. Experience. Reliability.
customers throughout the world in each
products to your world. With automated
Responsiveness.
of the industries we serve.
manufacturing capacity strategically
At ITT Cannon, these are the strengths
located in North America, Europe and
that we bring to our customers each and
Asia, we can produce products in either
large or small quantities to quickly meet
your exact requirements.
ITT Cannon is able to modify existing
products to suit special customer
requirements. With global
I
V
every day. Just as we have for nearly nine
decades. We pride ourselves on a level of
R E S P O N S I V E N E S S
service and manufacturing know-how
that has enabled us to lead our industry.
A singular focus on responding to your
Exceeding your expectations — not just
needs
meeting them — is how we approach
every project.
manufacturing capacity in every
We know that to be responsive, we must
continent, we are also able to source
know your world inside and out: your
With the world moving faster all the
product from the location that best suits
particular company, your industry and
time, ITT Cannon is a partner who can
your needs. This means we have the
your challenges. Each of ITT Cannon’s
help you get your products to market not
flexibility to select the most
thousands of employees worldwide is
just on time, but ahead of the
advantageous shipping methods and
focused on responding to you with
competition.
other logistical options.
timely and dependable information —
At ITT Cannon, we realize that each
and on ensuring that we keep the
customer we serve has their own special
commitments we make. For instance, our
needs and expectations. That is why we
globally linked computer system tracks
would welcome the opportunity to
the status of your order anywhere in the
discuss your project, your company, your
world.
industry — yes, your world.
ITT Cannon has established Centers of
Excellence for world class capabilities
such as: Machining, stamping, surface
plating, molding, cable assembly and
network systems technology — all
utilizing the most advanced CAM
You also benefit from our field
equipment.
applications and sales network, which
provides industry-specific knowledge to
help you design in the best product for
R E
L
I
I
I
A
B
your application.
I
I
L
I
T
Y
Our distribution network is one of the
most extensive in the industry, and can
We don’t stop at ‘‘world class quality’’ —
Continuous improvement is our standard
Our goal is to bring world class
electronics to your world. This
commitment to perfection has helped
ITT Cannon’s global facilities earn ISO
9000 certification. We have invested in
world class process controls for both
assembly and component
manufacturing.
provide you off-the-shelf product to
meet the most challenging delivery
requirements.