Wall DCSD-25B-24 25 watt single output chassis mount dc/dc converter Datasheet

DCSD-25 Series
25 Watt
Single Output
Chassis Mount DC/DC Converter
FEATURES
● 105°C Output Capacitor
● Low Cost, High Reliability
● Compact Size, Light Weight
● 100% Full Load Burn-In Tested
● Built-In EMI Filter, Low Ripple Noise
● High Efficiency, Low Working Temperature
● Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: DCSD-25 Series
o
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
DCSD-25A:
DCSD-25B:
DCSD-25C:
DCSD-25A:
DCSD-25B:
DCSD-25C:
Input Voltage
Input Current
9.2 ~ 18VDC
19 ~ 36VDC
36 ~ 72VDC
3.2A at 12VDC
1.6A at 24VDC
0.8A at 48VDC
OUTPUT SPECIFICATIONS
Output Voltage
Output Voltage Tolerance (See Note 3)
Voltage Adjustability
Output Current
Line Regulation
Load Regulation
Ripple & Noise
Output Power
Setup, Rise Time
See Table
5V outputs: ±2%
12V & 24V outputs: ±1%
See Table
See Table
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
5V outputs: ±0.5%
12V outputs: ±0.3%
24V outputs: ±0.2%
5V outputs: 100mVp-p
12V outputs: 120mVp-p
24V outputs: 150mVp-p
See Table
2.5s, 50ms
PROTECTION
5V outputs: 5.75 ~ 6.75V / 10% Load
12V outputs: 16.8 ~ 20V / 10% Load
24V outputs: 31.5 ~ 37.5V / 10% Load
105%~150% Type: Foldback Current Limiting Reset: Auto recovery.
Over Voltage Protection
Over Load Protection
GENERAL SPECIFICATIONS
Efficiency
Withstand Voltage
Isolation Resistance
See Table
1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG)
500VDC / 100MΩ (input to output, input to FG, output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity
Storage Humidity
Vibration
Temperature Coefficient
-10°C to +60°C (refer to output derating curve)
-20°C to +85°C
20% to 90% RH
10% to 95% RH
10~500Hz, 2G 10min./1cycle, Period for 60min. each axes
±0.03%/°C (0°C~50°C)
PHYSICAL SPECIFICATIONS
Weight
Dimensions
360 grams
99(L) x 97(W) x 35(H) mm
SAFETY & EMC
EMC Standards
EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
DCSD-25 Series
25 Watt
Single Output
Chassis Mount DC/DC Converter
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
DCSD-25A-5
DCSD-25A-12
DCSD-25A-24
DCSD-25B-5
DCSD-25B-12
DCSD-25B-24
DCSD-25C-5
DCSD-25C-12
DCSD-25C-24
Input Voltage
12 VDC
(9.2 ~ 18 VDC)
24 VDC
(19 ~ 36 VDC)
48 VDC
(36 ~ 72 VDC)
Output
Voltage
Voltage
Adjustability
Rated Output
Output
Current
Ripple & Noise
Output
Power
Efficiency
5 VDC
4.5 ~ 5.5VDC
5A
100mVp-p
25W
71%
12 VDC
11 ~ 16VDC
24 VDC
23 ~ 30VDC
2.1A
120mVp-p
25.2W
72%
1.1A
150mVp-p
26.4W
74%
5 VDC
4.5 ~ 5.5VDC
5A
100mVp-p
25W
72%
12 VDC
11 ~ 16VDC
2.1A
120mVp-p
25.2W
75%
24 VDC
23 ~ 30VDC
1.1A
150mVp-p
26.4W
78%
5 VDC
4.5 ~ 5.5VDC
5A
100mVp-p
25W
75%
12 VDC
11 ~ 16VDC
2.1A
120mVp-p
25.2W
78%
24 VDC
23 ~ 30VDC
1.1A
150mVp-p
26.4W
81%
NOTES
1. The DCSD-25 Series is designated as DCSD-25x-y where x can be A (9.2 ~ 18 VDC input voltage),
B (19 ~ 36 VDC input voltage), or C (36 ~ 72 VDC input voltage) and y can be 5, 12, or 24 for output voltage.
2. All parameters are specified at rated input, rated load and 25ºC 70% RH. ambient.
3. Tolerance includes setup tolerance, line regulation, and load regulation.
4. Ripple & noise are measured at 20MHz using a 12" twisted pair terminated with a 0.1uF & 47uF capacitor.
5. Line regulation is measured from low line to high line at rated load.
6. Load regulation is measured from 0% to 100% rated load.
DERATING CURVE
STATIC CHARACTERISTICS (DCSD-25C-24)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
DCSD-25 Series
25 Watt
Single Output
Chassis Mount DC/DC Converter
MECHANICAL DRAWING
Unit: mm
Pin No.
1
2
3
Terminal Pin No. Assignment
Assignment
Pin. No
Assignment
DC INPUT (V-)
4
DC OUTPUT (+V)
DC INPUT (V+)
5
DC OUTPUT (-V)
FG
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Similar pages