1.25mm Pitch Miniature Crimping Connector DF13 Series Right Angle Type Straight Type Type ■Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type) (For DIP type, the mounting height is to 5.3mm to the straight and 3.6mm at the right angle) Mounting Type Mounting Height DIP 5.3mm SMT 5.8mm DIP 3.6mm SMT Correspond to Automatic Mounting Secure the automatic plain area for the absorption type automatic mounting machine. Straight Type Absorption area 2. Multi-contact The double row type achieves the multi-contact up to 40 contacts, and secures 30% higher density in the mounting area, compared with the single row type. 3. Correspond to Automatic Mounting The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossed tape packaging. In addition, the tube packaging can be selected. 4. Integral Basic Function Despite Miniature Size The header is designed in a scoop-proof box structure, and completely prevents mis-insertion. In addition, the surface mounting (SMT) header is equipped with the metal fitting to prevent solder peeling. Metal fitting Right Angle Type Absorption area ■Applications Note PC, mobile terminal, miniature type business equipment, and other various consumer equipment, including video camera Figure 1 B183 ■Product Specifications Operating Temperature Range: -35 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Current rating 1A Rating Voltage rating 150V AC Operating Moisture Range: 40 to 80% Item Storage Moisture Range: 40 to 70% Specification (Note 2) Condition 1.Insulation Resistance 500M ohms min. 100V DC 2.Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute 3.Contact Resistance 30m ohms max. 100mA 4.Single Insertion/Extraction Force 0.3N (30gf) min., 3N (300gf) max. Measured at the square steel pin of 0.35±0.002mm 5.Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1µs or more 6.Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 7.Temperature Cycle (-55ç: 30 minutes➝ 5 to 35ç: 10 minutes➝ 85ç: 30 minutes➝ 5 to 35ç: 10 minutes) 5 cycles Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. 8.Durability (Mating/un-mating) Contact resistance: 30m ohms max. Tin plating: 30 cycles 9.Resistance to Soldering heat Flow: 250ç for 10 seconds Gold plating: 50 cycles No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Product Part Finish Remarks Crimping Socket Insulator Crimping Contact for Socket Contact Polyamide Beige UL94V-0 Phosphor copper Tin plated or gold plated - Insulator Polyamide Beige UL94V-0 Contact Brass Tin plated - Insulator Polyamide Beige UL94V-0 Contact Brass Tin plated or gold plated - Metal Fitting Phosphor copper Tin plated - Pin Header (Through hole) Pin Header (SMT) Material ■Ordering Information ●Connector DF13 q # - * S - 1.25 C w e r t y q Series Name : DF13 e Number of Contacts t Contact Pitch: 1.25mm w Style Symbol : Blank: With boss r Single row: 2 to 12, 14, 15 y Contact Type A: Without boss r Double row: 10, 20, 30, 40 V Type C : Crimping socket / DSA : Straight through hole B: Without boss, embossed tape type r Connector Type DS : Right angle through hole / V : Straight SMT C: Without boss, embossed tape type t S: Single row socket / P: Single row pin header H : Right angle SMT t DS: Double row socket / DP: Double row pin header ●Contact DF 13 - 2630 SCF A q B184 w e q Applicable Cable Size 2630: AWG26 to 30 w Packaging Type SCF: Socket Contact/Reel e Plating Type Blank: Tin plated A : Gold plated ■Single Row Socket [Specific No.] - **, (**) Blank: 1 bag: 100 pcs. Photo: Contact insertion Number of Contacts Part Number CL No. A 1.25 2 DF13-2S-1.25C(**) 536-0001-4-** 2.50 3 DF13-3S-1.25C(**) 536-0002-7-** 3.75 4 DF13-4S-1.25C(**) 536-0003-0-** 5.00 5 DF13-5S-1.25C(**) 536-0004-2-** 6.25 6 DF13-6S-1.25C(**) 536-0005-5-** 7.50 7 DF13-7S-1.25C(**) 536-0006-8-** 8.75 8 DF13-8S-1.25C(**) 536-0007-0-** Note 1.The quantity at the specific No. "None" is delivered B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 per bag Part Number DF13- 9S-1.25C(**) DF13-10S-1.25C(**) DF13-11S-1.25C(**) DF13-12S-1.25C(**) DF13-14S-1.25C(**) DF13-15S-1.25C(**) Number of Contacts CL No. 9 536-0008-3-** 10 536-0009-6-** 11 536-0010-5-** 12 536-0011-8-** 14 536-0013-3-** 15 536-0014-6-** A 10.00 11.25 12.50 13.75 16.25 17.50 Unit: mm B 12.90 14.15 15.40 16.65 19.15 20.40 (100 pcs.). If needed, please select and order the products per bag. ■Double Row Socket Photo: Contact insertion state Unit: mm Part Number DF13-10DS-1.25C(**) DF13-20DS-1.25C(**) DF13-30DS-1.25C(**) DF13-40DS-1.25C(**) Note:The quantity Number of Contacts CL No. 10 536-0550-2-** 20 536-0555-6-** 30 536-0560-6-** 40 536-0565-0-** at the specific No. "Blank" is A B [Specific No.] – **, (**) Blank: 1 bag: 100 pcs. 5.00 10.40 11.25 16.65 17.50 22.90 23.75 29.15 delivered per bag (100pcs). If needed, please select and order the products per bag. B185 ■Single Row Straight Pin Header (Through hole) [Specific No.] – **, (**) Blank: Tin plated 20: Tin plated, tube packaging BTube Dimensions ●Board Through-hole Diameter:Ø0.6±0.03 Number of Contacts Part Number CL No. A 1.25 2 DF13-2P-1.25DSA(**) 536-0101-9-** 2.50 3 DF13-3P-1.25DSA(**) 536-0102-1-** 3.75 4 DF13-4P-1.25DSA(**) 536-0103-4-** 5.00 5 DF13-5P-1.25DSA(**) 536-0104-7-** 6.25 6 DF13-6P-1.25DSA(**) 536-0105-0-** 7.50 7 DF13-7P-1.25DSA(**) 536-0106-2-** 8.75 8 DF13-8P-1.25DSA(**) 536-0107-5-** Note 1.The quantity at the specific No. "None" is delivered B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 per bag Number of Contacts Part Number CL No. A 10.00 9 DF13- 9P-1.25DSA(**) 536-0108-8-** 11.25 10 DF13-10P-1.25DSA(**) 536-0109-0-** 12.50 11 DF13-11P-1.25DSA(**) 536-0110-0-** 13.75 12 DF13-12P-1.25DSA(**) 536-0111-2-** 15.00 13 DF13-13P-1.25DSA(**) 536-0112-5-** 16.25 14 DF13-14P-1.25DSA(**) 536-0113-8-** 17.50 15 DF13-15P-1.25DSA(**) 536-0114-0-** (100 pcs.). If needed, please select and order the products Unit: mm B 12.90 14.15 15.40 16.65 17.90 19.15 20.40 per bag. ■Single Row Right Angle Pin Header (Through hole) [Specific No.] – **, (***) (20): Tin plated tube packaging BTube Dimensions ●Board Through-hole Diameter:Ø0.6±0.03 Number of Contacts A Part Number CL No. B Tube Packaging Quantity Part Number 1.25 4.15 115 2 DF13-2P-1.25DS(**) 536-0151-7-** DF13- 9P-1.25DS(**) 2.50 5.40 89 3 DF13-3P-1.25DS(**) 536-0152-0-** DF13-10P-1.25DS(**) 3.75 6.65 72 4 DF13-4P-1.25DS(**) 536-0153-2-** DF13-11P-1.25DS(**) 5.00 7.90 61 5 DF13-5P-1.25DS(**) 536-0154-5-** DF13-12P-1.25DS(**) 6.25 9.15 52 6 DF13-6P-1.25DS(**) 536-0155-8-** DF13-14P-1.25DS(**) 7.50 10.40 46 7 DF13-7P-1.25DS(**) 536-0156-0-** DF13-15P-1.25DS(**) 8.75 11.65 41 8 DF13-8P-1.25DS(**) 536-0157-3-** Note 1.Order the tube packaging product, multiplying the tube packaging quantity. B186 Unit: mm Number of Contacts A CL No. B Tube Packaging Quantity 37 9 10.00 12.90 536-0158-6-** 34 10 11.25 14.15 536-0159-9-** 31 11 12.50 15.40 536-0160-8-** 29 12 13.75 16.65 536-0161-0-** 25 14 16.25 19.15 536-0163-6-** 23 15 17.50 20.40 536-0164-9-** BSingle Row Straight Pin Header (SMT) [Specific No.] – **, (**) (20): Tin plated tube package (50): Gold plated tube package This pin header is a box type style. Therefore, the header has neither vacuum absorption face nor embossed tape packaging specification. Unit: mm Part Number DF13- 2P-1.25V(**) DF13- 3P-1.25V(**) DF13- 4P-1.25V(**) DF13- 5P-1.25V(**) DF13- 6P-1.25V(**) DF13- 7P-1.25V(**) DF13- 8P-1.25V(**) DF13- 9P-1.25V(**) DF13-10P-1.25V(**) DF13-11P-1.25V(**) DF13-12P-1.25V(**) DF13-14P-1.25V(**) DF13-15P-1.25V(**) CL No. 536-0201-3-** 536-0202-6-** 536-0203-9-** 536-0204-1-** 536-0205-4-** 536-0206-7-** 536-0207-0-** 536-0208-2-** 536-0209-5-** 536-0210-4-** 536-0211-7-** 536-0213-2-** 536-0214-5-** Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 14 15 A 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 B 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 C 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 D 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 E 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 F Tube Package Quantity 1.95 67 3.20 57 4.45 49 5.70 44 6.95 39 8.20 36 9.45 33 10.70 30 11.95 28 13.20 26 14.45 24 16.95 21 18.20 20 Remark Guide post Note:Please order the tube packaging products, multiplying the tube packaging quantity. BPCB mounting pattern BTube Dimensions Note:If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. B187 ■Single Row Straight Pin Header (SMT) ■(Three-Wall/Correspond to Vacuum Absorption) BPCB mounting pattern Note 1.This hole isn't needed for "No guide post". Note 2.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. [Specific No.] – **, (**) (20): Tin plated tube packaging (21): Tin plated embossed tape packaging (50): Gold plated tube packaging (51): Gold plated embossed tape packaging Unit: mm Part Number CL No. Number of Contacts DF13B- 2P-1.25V(**) DF13B- 3P-1.25V(**) DF13B- 4P-1.25V(**) DF13B- 5P-1.25V(**) DF13B- 6P-1.25V(**) DF13B- 7P-1.25V(**) DF13B- 8P-1.25V(**) DF13B- 9P-1.25V(**) DF13B-10P-1.25V(**) DF13B-11P-1.25V(**) DF13B-12P-1.25V(**) DF13B-14P-1.25V(**) DF13B-15P-1.25V(**) 536-0051-2-** 536-0052-5-** 536-0053-8-** 536-0054-0-** 536-0055-3-** 536-0056-6-** 536-0057-9-** 536-0058-1-** 536-0059-4-** 536-0060-3-** 536-0061-6-** 536-0063-1-** 536-0064-4-** 2 3 4 5 6 7 8 9 10 11 12 14 15 DF13C- 2P-1.25V(**) DF13C- 3P-1.25V(**) DF13C- 4P-1.25V(**) DF13C- 5P-1.25V(**) DF13C- 6P-1.25V(**) DF13C- 7P-1.25V(**) DF13C- 8P-1.25V(**) DF13C- 9P-1.25V(**) DF13C-10P-1.25V(**) DF13C-11P-1.25V(**) DF13C-12P-1.25V(**) DF13C-14P-1.25V(**) DF13C-15P-1.25V(**) Note 1.Please order Note 2.Please order B188 A B C D E F 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 1.95 3.20 4.45 5.70 6.95 8.20 9.45 10.70 11.95 13.20 14.45 16.95 18.20 – 1.25 4.15 7.15 2 5.65 1.95 536-0401-2-** – 2.50 5.40 8.40 3 6.90 3.20 536-0402-5-** – 3.75 6.65 9.65 4 8.15 4.45 536-0403-8-** – 5.00 7.90 10.90 5 9.40 5.70 536-0404-0-** – 6.25 9.15 12.15 6 10.65 6.95 536-0405-3-** – 7.50 10.40 13.40 7 11.90 8.20 536-0406-6-** – 8.75 11.65 14.65 8 13.15 9.45 536-0407-9-** – 10.00 12.90 15.90 9 14.40 10.70 536-0408-1-** – 11.25 14.15 17.15 10 15.65 11.95 536-0409-4-** – 12.50 15.40 18.40 11 16.90 13.20 536-0410-3-** – 13.75 16.65 19.65 12 18.15 14.45 536-0411-6-** – 16.25 19.15 22.15 14 20.65 16.95 536-0413-1-** – 17.50 20.40 23.40 15 21.90 18.20 536-0414-4-** the tube packaging product, multiplying the tube packaging quantity. the embossed tape packaging product according to reel number. (1000 G Tube Packaging Quantity Emboss Width 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 16 16 24 24 24 24 24 24 24 32 32 32 44 2.20 3.45 3.10 4.35 5.60 6.85 8.10 9.35 10.60 11.85 13.10 15.60 16.85 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 16 16 24 24 24 24 24 24 24 32 32 32 44 pcs. per reel) Remarks With boss Without boss ■Single Row Right Angle Pin Header (SMT) ■(Four-Wall/Correspond to Emboss Absorption) BPCB mounting pattern BTube Dimensions [Specific No.] – **, (**) (20): Tin plated tube packaging (21): Tin plated embossed tape packaging (50): Gold plated tube packaging (51): Gold plated embossed tape packaging Unit: mm Part Number CL No. Number of Contacts DF13- 2P-1.25H(**) DF13- 3P-1.25H(**) DF13- 4P-1.25H(**) DF13- 5P-1.25H(**) DF13- 6P-1.25H(**) DF13- 7P-1.25H(**) DF13- 8P-1.25H(**) DF13- 9P-1.25H(**) DF13-10P-1.25H(**) DF13-11P-1.25H(**) DF13-12P-1.25H(**) DF13-14P-1.25H(**) DF13-15P-1.25H(**) 536-0251-1-** 536-0252-4-** 536-0253-7-** 536-0254-0-** 536-0255-2-** 536-0256-5-** 536-0257-8-** 536-0258-0-** 536-0259-3-** 536-0260-2-** 536-0261-5-** 536-0263-0-** 536-0264-3-** 2 3 4 5 6 7 8 9 10 11 12 14 15 DF13A- 2P-1.25H(**) DF13A- 3P-1.25H(**) DF13A- 4P-1.25H(**) DF13A- 5P-1.25H(**) DF13A- 6P-1.25H(**) DF13A- 7P-1.25H(**) DF13A- 8P-1.25H(**) DF13A- 9P-1.25H(**) DF13A-10P-1.25H(**) DF13A-11P-1.25H(**) DF13A-12P-1.25H(**) DF13A-14P-1.25H(**) DF13A-15P-1.25H(**) Note 1.Please order Note 2.Please order A B C D 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.75 16.25 17.50 4.15 5.40 6.65 7.90 9.15 10.40 11.65 12.90 14.15 15.40 16.65 19.15 20.40 7.15 8.40 9.65 10.90 12.15 13.40 14.65 15.90 17.15 18.40 19.65 22.15 23.40 3.35 4.60 5.85 7.10 8.35 9.60 10.85 12.10 13.35 14.60 15.85 18.35 19.60 E Tube Packaging Quantity Emboss Width 5.65 6.90 8.15 9.40 10.65 11.90 13.15 14.40 15.65 16.90 18.15 20.65 21.90 67pcs 57 49 44 39 36 33 30 28 26 24 21 20 16 16 24 24 24 24 24 24 24 32 32 32 44 – 1.25 4.15 7.15 2 5.65 67pcs 536-0301-8-** – 2.50 5.40 8.40 3 6.90 57 536-0302-0-** – 3.75 6.65 9.65 4 8.15 49 536-0303-3-** – 5.00 7.90 10.90 5 9.40 44 536-0304-6-** – 6.25 9.15 12.15 6 10.65 39 536-0305-9-** – 7.50 10.40 13.40 7 11.90 36 536-0306-1-** – 8.75 11.65 14.65 8 13.15 33 536-0307-4-** – 10.00 12.90 15.90 9 14.40 30 536-0308-7-** – 11.25 14.15 17.15 10 15.65 28 536-0309-0-** – 12.50 15.40 18.40 11 16.90 26 536-0310-9-** – 13.75 16.65 19.65 12 18.15 24 536-0311-1-** – 16.25 19.15 22.15 14 20.65 21 536-0313-7-** – 17.50 20.40 23.40 15 21.90 20 536-0314-0-** the tube packaging product, multiplying the tube packaging quantity. the embossed tape packaging product according to reel number. (1000 pcs. per reel) 16 16 24 24 24 24 24 24 24 32 32 32 44 Remarks With boss Without boss B189 ■Double Row Straight Pin Header (SMT) ■(Four-Wall Type Compliant to Emboss Absorption) BPCB mounting pattern Note 1.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. BTube Dimensions Note 2.The hole isn't needed at "Without boss". [Specific No.] - **, (**) (20): Tin plated tube packaging (29): Tin plated embossed tape packaging (50): Gold plated tube packaging (59): Gold plated embossed tape packaging Unit: mm Number of Part Number CL No. Contacts Specification Specification Specification Specification Tube Package Emboss A B C D 5 8.7 7.5 DF13A-10DP-1.25V(**) 536-0510-8-** 10 12.1 DF13A-20DP-1.25V(**) 536-0515-1-** 20 18.35 11.25 14.95 13.75 DF13A-30DP-1.25V(**) 536-0520-1-** 30 24.6 17.5 21.2 DF13A-40DP-1.25V(**) 536-0525-5-** 40 30.85 23.75 27.45 26.25 20 (29) (50) (59) Quantity Width K K K K 40 pcs 24 K K K K 26 32 With – – K K 19 44 boss – – K K 15 44 DF13A-10DP-1.25V(**) 536-0600-9-** 10 12.1 – K K K K 40 24 DF13A-20DP-1.25V(**) 536-0605-2-** 20 18.35 11.25 14.95 – K K K K 26 32 Without DF13A-30DP-1.25V(**) 536-0610-2-** 30 24.6 17.5 21.2 – – – K K 19 44 boss DF13A-40DP-1.25V(**) 536-0615-6-** 40 30.85 23.75 27.45 – K K 15 44 5 8.7 – – Note 1.Please order the tube packaging product, multiplying the tube packaging quantity. Note 2.Please order the embossed tape packaging product according to reel number. (1 reel: 1000 pcs.) Note 3.The absorption cap is attached to the embossed tape packaging product. B190 Remarks (20) ■Crimping Contact Part Number DF13-2630SCF DF13-2630SCFA CL No. 536-0300-5 536-0298-5 Packaging Type Reel Reel Quantity 10,000 10,000 Finish Tin plating Gold plating ●Applicable Cable (Tin Plating Annealed Copper Wire) Conductor Size (Wire construction) Jacket Diameter AWG26(7 cores./0.16mm) AWG28(7 cores./0.127mm) Ø0.65 to Ø1.0mm AWG30(7 cores./0.1mm) Note:If other cables are used instead of the applicable cable, please contact the Hirose sales department. ●Recommended Cable UL1571 ●Strip Length 1.2 to 1.9mm BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Applicator AP105-DF13-2630S 901-4531-9 DF13-2630SCF/SCFA Press Main Unit CM-105 901-0005-4 --------------Manual Crimping Tool DF13-TB2630HC 550-0256-1 DF13-2630SCF Extraction Tool DF-C-PO(B) 550-0179-2 DF13-2630SCF Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier. BApplication Pattern Through hole (Single Row Product) SMT (Double Row Product) Straight Right Angle SMT (Single Row Product) B191 BEmbossed Carrier Tape Dimensions KDF13B-*P-1.25V With boss KDF13C-*P-1.25V Without boss KDF13-*P-1.25H KDF13A-*P-1.25H Unit: mm Product Type Number of Contacts A B DF13B-*P-1.25V 2, 3 16 DF13C-*P-1.25V 4 to 90 24 10 to 14 15 DF13-*P-1.25H DF13A-*P-1.25H Note:The 13 contacts is not serialized. B192 C D ––––––– 7.5 16.4 ––––––– 11.5 24.4 32 28.4 14.2 32.4 44 40.4 20.2 44.4 BPrecautions 1. Recommended Temperature Profile (SMT) Note 1.This process is allowed up to twice under the same condition. However, the interval between the first and second processes must be maintained at the room temperature. Note 2.The temperature indicates the board surface temperature in the connector lead area. 2. Recommended Soldering Condition (SMT) 3. Recommended Screen Manual soldering: 290ç for 2 seconds 0.15 to 0.2mm Thickness (SMT) 4. Board Warpage (SMT) Max 0.03mm in the connector center area, based on both connector edges 5. Recommended Soldering Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds 5. Condition (Through hole) 6. Cleaning Condition Refer to Nylon Connector Use Hand book. 7. Connection Condition Refer to Nylon Connector Use Hand book. ■Carefully carry out the crimping operation according to "Crimping Condition Sheet" and "Crimping Quality Standard", because the crimping contact is an extremely small style. 8. Cautions ■Be careful for the excessive scoop insertion/extraction, which will cause damage to the product. B193