158X Series Type X2 Suppressor Capacitors Metallized Polyester / Radial Leads • Radial Leads in Two Lengths • UL-1414 and CSA Approved • Flame Retardant Case Meets UL94V-0 • Potting End Fill Meets UL94V-0 • Used in applications where damage to the capacitor will not lead to the danger of electrical shock • Lead Material Tinned Copper Clad Steel GENERAL SPECIFICATIONS . Operating Temperature: -40 °C to +100 °C Voltage Range: 275/250 VAC, 60 Hz Capacitance Range: 0.01 µF to 2.2 µF Capacitance Tolerance: ±20% (Standard) ±10% (Special) Dissipation Factor (DF) tgδ 0.01 Max at 1,000 ± 100kHz International Approvals Safety Agency Standard File Number UL UL-1414 (250VAC) E171988 UL UL-1283 (250VAC) E223166 C22 2, No. 1-98/No.8 (250VAC) 1572961 CSA VDE SEMKO FIMKO DEMKO NEMKO IEC384-14 II Maximum Pulse Rise Time µF V/µs µF V/µs .010 2800 0.22 1200 .022 2400 0.47 1000 .033 2400 0.68 1000 .047 2000 1.00 800 .068 2000 1.50 800 .100 1600 2.20 600 Outline Dimensions 109365 EN 132400 IEC384-14 II 9817262 EN 132400 IEC384-14 II 11141 EN 132400 IEC384-14 II 9817262 EN 132400 IEC384-14 II P98101124 EN 132400 RoHS Compliant Ratings Inches Catalog Part Number Insulation Resistance (IR) (@ 500 VDC and 20 °C) Terminal to Terminal: ≤0.33µF 15,000 MΩ min ≥0.47µF 5,000 MΩ x µF min Both Terminals to Body: 100,000 MΩ min Millimeters Cap (µF) L Length T Thickness H Height S Spacing Ød L Length T Thickness H Height S Spacing 158X103 0.010 0.669 0.197 0.472 Ød 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X123 0.012 0.669 0.197 158X153 0.015 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X183 0.018 0.669 0.6 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X223 0.022 0.6 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 158X273 0.6 0.027 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X333 0.033 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6 158X393 0.039 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8 158X473 0.047 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8 158X563 0.056 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8 158X683 0.068 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8 158X823 0.082 0.669 0.256 0.591 0.591 0.031 17.0 6.5 15.0 15.0 0.8 158X104 0.100 0.669 0.315 0.591 0.591 0.031 17.0 8.0 15.0 15.0 0.8 158X124 0.120 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8 158X154 0.150 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8 158X184 0.180 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8 158X224 0.220 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8 158X274 0.270 1.181 0.354 0.669 1.083 0.031 30.0 9.0 17.0 27.5 0.8 158X334 0.330 0.984 0.394 0.768 0.886 0.031 25.0 10.0 19.5 22.5 0.8 158X394 0.390 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8 158X474 0.470 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8 158X564 0.560 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8 158X684 0.680 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8 158X824 0.820 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0 158X105 1.000 1.201 0.591 0.965 1.083 0.039 30.5 15.0 24.5 27.5 1.0 158X125 1.200 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0 158X155 1.500 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0 158X185 1.800 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0 158X225 2.200 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0 NOTE: If ±10% tolerance is required, add 'K' to end of Catalog Number NOTE: Parts are normally supplied with leads 30mm minimum To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com