Fairchild DFB20100 Glass-passivated bridge rectifier Datasheet

DFB2005 - DFB20100
Glass-Passivated Bridge Rectifiers
Features
•
•
•
•
•
•
•
•
UL Certificate: # E258596
Glass-Passivated Junction
Ideal for Printed Circuit Board
Reliable Low-Cost Construction
Plastic Material has Underwriters Laboratory Flammability Classification 94V-0
Surge Overload Rating to 250 A Peak
High Case Dielectric Strength: 2000 VRMS
Isolated Voltage from Case to Lead: > 2500 V
+ ~
~
-
TS-6P
Ordering Informations
Part Number
Marking
DFB2005
DFB2005
DFB2010
DFB2010
DFB2020
DFB2020
DFB2040
DFB2040
DFB2060
DFB2060
DFB2080
DFB2080
DFB20100
DFB20100
© 2009 Fairchild Semiconductor Corporation
DFB2005 - DFB20100 Rev. 1.2.2
Package
Packing Method
TS-6P 4L
Rail
www.fairchildsemi.com
1
DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers
October 2013
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Value
Symbol
Parameter
VRRM
Maximum
Recurrent Peak Reverse Voltage
VRMS
DFB
2005
DFB
2010
DFB
2020
DFB
2040
DFB
2060
DFB
2080
DFB Units
20100
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
35
70
140
280
420
560
700
V
VDC
Maximum DC Blocking Voltage
50
100
200
400
600
800
1000
V
I(AV)
Maximum
Average Forward Rectified Current
20
A
IFSM
Peak Forward Surge Current
(8.3 ms Single Half-wave)
250
A
RθJC
Typical Thermal Resistance(2)
4.75
°C/W
TJ
Operating Temperature Range
-55 to +150
°C
Storage Temperature Range
-55 to +150
°C
TSTG
Notes:
1. Single-phase, half-wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
2. Device mounted on 4 inch x 5 inch x 0.25 inch Al-plate heat sink.
Electrical Characteristics
Values are at TA = 25°C unless otherwise specified.
Symbol
Parameter
Test condition
Value
Unit
Maximum
10 A
1.0
Instantaneous Forward Voltage
20 A
1.1
IR
Maximum DC Reverse Current
at Rated DC Blocking Voltage
TA = 25°C
10
TA = 125°C
500
I2t
Rating for Fusing (t < 8.3 ms)
259
A2s
CJ
Typical Junction Capacitance per Leg(3)
140
pF
VF
V
μA
Note:
3. Measured at 1 MHz and applied reverse bias of 4.0 V DC.
© 2009 Fairchild Semiconductor Corporation
DFB2005 - DFB20100 Rev. 1.2.2
www.fairchildsemi.com
2
DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers
Absolute Maximum Ratings(1)
Average Forward Current, [A]
25
20
15
10
5
0
0
20
40
60
80
100
120
140
160
o
Case Temperature, [ C]
Figure 1. Maximum Derating Curve for Output
Current
Figure 2. Maximum Forward Surge Current per Leg
Figure 3. Typical Reverse Characteristics per Leg
Figure 4. Typical Forward Characteristics per Leg
Figure 5. Typical Junction Capacitance
© 2009 Fairchild Semiconductor Corporation
DFB2005 - DFB20100 Rev. 1.2.2
www.fairchildsemi.com
3
DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers
Typical Performance Characteristics
TS-6P
30.30
29.70
CL
3.40
3.10
3.0 x45
11.20
10.80
4.20
3.80
+
~
~
4.80
4.40
4.80
3.80
3.40
20.30
19.70
-
2.50
18.00
17.00
2.40
(4X)
2.00
2.90
2.50
1.10
(4X)
0.90
7.50
7.30
10.20
9.80
0.70
0.60
7.70
7.30
NOTES:
A. THIS PACKAGE DOES NOT CONFORM TO
ANY STANDARDS.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
D. DRAWING FILE NAME: TS6P04AREV1
Figure 6. 4-LEAD, TS6P, THROUGH-HOLE, MOLDED PACKAGE (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/TS/TS6P04A.pdf.
© 2009 Fairchild Semiconductor Corporation
DFB2005 - DFB20100 Rev. 1.2.2
www.fairchildsemi.com
4
DFB2005 - DFB20100 — Glass-Passivated Bridge Rectifiers
Physical Dimensions
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower¥
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
mWSaver®
OptoHiT¥
OPTOLOGIC®
OPTOPLANAR®
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
FPS¥
Sync-Lock™
®
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
®*
TinyBoost®
TinyBuck®
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
intended for surgical implant into the body or (b) support or sustain
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I66
© Fairchild Semiconductor Corporation
www.fairchildsemi.com
Similar pages