DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option DESCRIPTION Several pin out options are possible with the 14 pin DIL series. Suitable for telecommunication applications where breakdown voltages up to 4.25 kVDC is required. FEATURES CHARACTERISTICS • 2 Form C available • High resistance available • 2 Form A switches available • Magnetic shield available • 4.25 kVDC breakdown voltage available • High power switching available • Compatible with DIL socket • Coil resistance up to 11 kΩ • Diode option DIMENSIONS All dimensions in mm [inches] ORDER INFORMATION Part Number Example Series Nominal Voltage Contact Form Switch Model Pin Out Option () Version with magnetic Shield Version DIL XX - XX XX - XX X XX 1A 66, 72, 75 13*,15 2A 66, 72, 75 21 05, 12 1C 90 51* 05, 12, 24 2C 90 62, 63 HR, L 05, 12, 24 Options * When HR is selected, 24 V coil is not available. L = No Option. L(M),D(Q),E(R)t, F(S)tt HR, L L t Not available with Pin out 62, 63. www.meder.com 134 L DIL12 - 1A72 - 10LHR 12 is the nominal voltage 1A is the contact form 72 is the switch model 13 is the pin out L is the option HR is the high resistance version DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option PIN OUT OPTIONS ( ) Versions with magnetic shield Please note: Any option can affect the coil resistance, the breakdown voltage or other electrical data. Please contact us. Special performance: The following special options are available on request: • Other pinning layouts • Other coil resistance values • Other switches available www.meder.com 135 DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option RELAY DATA All Data at 20° C Switch Model → Contact Form → Contact Ratings Conditions Switching Power Any DC combination of V & A not to exceed their individual max.‘s. Switching Voltage Switch 66 Form A Switch 72 Form A Min. Typ. Max. Min. Typ. Max. Units 10 15 W DC or peak AC 200 200 V Switching Current DC or peak AC 0.5 1.0 A Carry Current DC or peak AC 1.25 1.25 A Static Contact Resistance w/ 0.5 V & 50mA 150 150 mΩ Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 200 200 mΩ Insulation Resistance (100 Volts applied) Across Contact Contact to coil 1010 1012 1012 1012 Ω Breakdown Voltage Across Contact Contact to coil 225 1.5* 250 1.5* VDC kVDC Operate Time incl. Bounce With nominal voltage 0.5 0.7 ms Release Time Measured w/ no coil suppression 0.1 0.1 ms Capacitance Across Contact Contact to coil 0.2 4.0 0.2 4.0 pF 1000 1000 106 Cycles Life Expectancies Switching 5V - 10 mA DC <10 pF stray cap. For other load requirements, see the life test section on P. 112. Environmental Data Shock Resistance 1/2 sine wave duration for 11 ms 50 50 Vibration Resistance From 10 - 2000 Hz 20 20 Ambient Temperature max. 10°C/ minute allowable -20 70 -20 Storage Temperature max. 10°C/ minute allowable -25 85 -35 Soldering Temperature 5 sec. dwell * 4.25 kVDC / 3.0 kVRMS for Pin-outs 13 and 15. www.meder.com 136 260 g g 70 o C 95 o C 260 o C MEDER electronic DIL Series Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option RELAY DATA All Data at 20° C Switch Model → Contact Form → Contact Ratings Conditions Switching Power Any DC combination of V & A not to exceed their individual max.‘s. Switching Voltage Switch 75 Form A Switch 90 Form C Min. Typ. Max. Min. Typ. Max. Units 10 10 W DC or peak AC 500 175 V Switching Current DC or peak AC 0.5 0.5 A Carry Current DC or peak AC 1.0 1.0 A Static Contact Resistance w/ 0.5 V & 50mA 200 150 mΩ Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 200 250 mΩ Insulation Resistance (100 Volts applied) Across Contact Contact to coil 1010 1012 109 1012 Ω Breakdown Voltage Across Contact Contact to coil 1500 1.5*s 200 1.5 VDC kVDC Operate Time incl. Bounce With nominal voltage 0.5 0.7 ms Release Time Measured w/ no coil suppression 0.1 1.5 ms Capacitance Across Contact Contact to coil 0.4 4.0 1.0 4.0 pF DC <10 pF stray cap. 500 100 106 Cycles Life Expectancies Switching 5V - 10 mA For other load requirements, see the life test section on P. 112. Environmental Data Shock Resistance 1/2 sine wave duration for 11 ms 50 50 Vibration Resistance From 10 - 2000 Hz 20 20 Ambient Temperature max. 10°C/ minute allowable -20 70 -20 Storage Temperature max. 10°C/ minute allowable -25 85 -25 Soldering Temperature 5 sec. dwell 260 g g 70 o C 85 o C 260 o C * 4.25 kVDC / 3.0 kVRMS for Pin-outs 13 and 15. www.meder.com 137 DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option COIL DATA Contact Form Switch Model All Data at 20 °C 1A 2A 66 72 75 66 72 75 1C Coil Voltage Coil Resistance Pull-in Voltage Drop-Out Voltage Nominal Coil Power VDC Ω VDC VDC mW Nom. Max. Min. Typ. Max. Max. Min. Typ. 5 7.5 405 450 495 3.5 0.75 55 12 16 1620 1800 1980 8.4 1.8 80 24 30 4050 4500 4950 16.8 3.6 130 5 7.5 180 200 220 3.5 0.75 125 12 16 621 680 748 8.4 1.8 210 24 30 1800 2000 2200 16.8 3.6 290 5 7.5 180 200 220 3.5 0.75 125 12 16 900 1000 1100 8.4 1.8 145 24 30 2700 3000 3300 16.8 3.6 190 5 7.5 145 150 165 3.5 0.75 165 12 16 612 680 748 8.4 1.8 210 24 30 1800 2000 2200 16.8 3.6 290 90 2C The pull-in, drop-out voltages and coil resisitance will change at the rate of 0,4 % per °C. www.meder.com 138