Revised March 2000 DM74LS365A Hex 3-STATE Buffer/Bus Driver General Description This device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned OFF presenting a high-impedance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs. Ordering Code: Order Number Package Number Package Description DM74LS365AM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74LS365AN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y=A Input Output G1 G2 A Y H X X Hi-Z X H X Hi-Z L L H H L L L L H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level Hi-Z = 3-STATE (Outputs are disabled) © 2000 Fairchild Semiconductor Corporation DS006427 www.fairchildsemi.com DM74LS365A Hex 3-STATE Buffer/Bus Driver August 1986 DM74LS365A Absolute Maximum Ratings(Note 1) Supply Voltage Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. 7V Input Voltage 7V 0°C to +70°C Operating Free Air Temperature Range −65°C to +150°C Storage Temperature Range Recommended Operating Conditions Symbol Parameter Min Nom Max 4.75 5 5.25 Units VCC Supply Voltage VIH HIGH Level Input Voltage V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −2.6 mA IOL LOW Level Output Current 24 mA TA Free Air Operating Temperature 70 °C 2 V 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions VI Input Clamp Voltage VCC = Min, II = −18 mA VOH HIGH Level VCC = Min, IOH = Max Output Voltage VIL = Max, VIH = Min LOW Level VCC = Min, IOL = Max Output Voltage VIL = Max, VIH = Min VOL Min 2.4 Input Current @ Max Input Voltage VCC = Max, VI = 7V IIH HIGH Level Input Current VCC = Max, VI = 2.7V IIL LOW Level VCC = Max, VI = 0.5V (Note 3) Input Current IOZH Off-State Output Current with Off-State Output Current with Units −1.5 V V 0.35 0.5 0.25 0.4 V 0.1 mA 20 µA A Input −20 µA VCC = Max, VI = 0.4V (Note 4) A Input −0.4 VCC = Max, VI = 0.4V G Input −0.4 VCC = Max, VO = 2.4V 20 HIGH Level Output Voltage Applied VIH = Min, VIL = Max IOZL Max 3.4 IOL = 12 mA, VCC = Min II Typ (Note 2) VCC = Max, VO = 0.4V LOW Level Output Voltage Applied VIH = Min, VIL = Max IOS Short Circuit Output Current VCC = Max (Note 5) ICC Supply Current VCC = Max (Note 6) −20 14 mA µA −20 µA −100 mA 24 mA Note 2: All typicals are at VCC = 5V, TA = 25°C. Note 3: Both G inputs are at 2V. Note 4: Both G inputs at 0.4V. Note 5: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 6: ICC is measured with the DATA inputs grounded and the OUTPUT CONTROLS at 4.5V. Switching Characteristics at VCC = 5V and TA = 25°C RL = 667Ω Symbol CL = 50 pF Parameter Min Max CL = 150 pF Min Units Max tPLH Propagation Delay Time LOW-to-HIGH Level Output 16 25 ns tPHL Propagation Delay Time HIGH-to-LOW Level Output 16 25 ns tPZH Output Enable Time to HIGH Level Output 30 40 ns tPZL Output Enable Time to LOW Level Output 30 40 ns tPHZ Output Disable Time from HIGH Level Output (Note 7) 20 ns tPLZ Output Disable Time from LOW Level Output (Note 7) 20 ns Note 7: CL = 5 pF. www.fairchildsemi.com 2 DM74LS365A Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A 3 www.fairchildsemi.com DM74LS365A Hex 3-STATE Buffer/Bus Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 4