Document 284-1 SMT Power Inductors - DO5010H Series • Irms ratings up to 15 A; saturation currents up to 30 A • Heavy gauge wire for low DC resistance Designer’s Kit C355 contains 3 of each part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 3.2 – 4.0 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250 per 13″ reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth PCB washing Only pure water or alcohol recommended DCRSRF Inductance2 max typ3 Isat4 Irms5 Part Number1 ±20% (µH) (mOhm) (MHz) (A) (A) DO5010H-781ML_ 0.78 2.6156 30 15 DO5010H-152ML_ 1.5 4.0100 25 15 DO5010H-222ML_ 2.2 6.1 75 2012 DO5010H-332ML_ 3.3 8.6 60 1710 DO5010H-392ML_ 3.9 10 55159.0 DO5010H-472ML_ 4.7 14 40138.4 DO5010H-602ML_ 6.0 17 35127.5 DO5010H-782ML_ 7.8 18 35117.5 DO5010H-103ML_ 10 26 28106.0 DO5010H-123ML_12 28268.5 5.2 DO5010H-153ML_15 32208.0 4.4 DO5010H-223ML_22 47207.0 3.5 DO5010H-333ML_33 66155.5 3.0 DO5010H-473ML_ 47 86 9 4.52.6 DO5010H-683ML_ 68 130 8 3.52.3 DO5010H-104ML_ 100 190 7 3.01.8 DO5010H-154ML_ 150 250 6 2.61.5 DO5010H-224ML_ 220 380 5 2.41.2 DO5010H-334ML_ 330 560 4 1.91.0 DO5010H-474ML_ 470 850 3 1.40.82 DO5010H-684ML_ 680 1100 2.5 1.20.72 DO5010H-105ML_ 1000 1800 2.0 1.00.56 1. When ordering, please specify termination and packaging codes: DO5010H-105MLD Termination: L = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape. B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284A LCR meter or equivalent. 3. SRF measured using Agilent/HP 8753D network analyzer. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 284-1 Revised 10/14/08 Document 284-2 SMT Power Inductors - DO5010H Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 100 µH 100 10 µH 10 0.78 µH 1 0.78 µH 1 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 0.1 0.1 0.01 1 0.1 10 Frequency (MHz) 0.1 1 Current (A) 0.500 12,70 Irms Derating 120 Note: Maximum height: 0.315 for -781 to -153 8,00 0.300 for -223 to -683 7,62 0.280 for -104 to -105 7,11 Note 110 0.730 max 18,54 90 0.561 min 14,25 80 0.075 1,90 70 60 0.250 6,35 0.600 max 15,24 50 40 25°C Percent of rated Irms 100 100 10 30 0.065 max 1,65 20 0.200 max 5,08 0.710 max 18,03 10 0 -40 -20 0 20 40 60 80 100 Internal code 120 140 0.626 15,90 Recommended Land Pattern Dash number Ambient temperature (°C) XXX X Part Marking Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for color dot marking details. Dimensions are in inches mm Document 284-2 Revised 10/14/08