60 Watts DPS50-M Series Medical Total Power: 30 - 60 Watts Input Voltage: 127 - 300 VDC, 90 - 264 VAC # of Outputs: Single Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current 90 - 264 VAC (wide range), 127 - 300 VDC 47 - 440 Hz <50A @ 230 VAC, cold start @ 25C <2.0A rms @ 115 VAC; <1A @ 230 VAC >80% @ full load typical, @115VAC FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 275µA max. @ 50/60 Hz, 264 VAC input Output Special Features • Medical safety approvals • CE Mark EMC & LVD • Universal AC input • Fully regulated output • Overload and short circuit protection • Internal remote sense • Constant voltage • High efficiency • High MTBF • IEC320 AC receptacle, 3 pin (type C14) • Built in EMI filter (CISPR 22 Class B) • LED power good indicator • Input power <74 watts • Complies with EN61000-3-2 Environmental Maximum Power (Po) 60W (DPS52-M, 30W) Hold-up time 10 ms. typical at full load @ 115VAC Overvoltage protection 20% - 45% above nominal output maximum. Latching type, recycle AC to reset. Overload protection Output short circuit protection auto recover. Overload protected @ 120 - 150% above maximum rating. Cable/connector DC cable with 2.5 mm center plug barrel type DC plug center +v DC plug outer -v Safety UL CSA VDE CE UL60601-1 CSA-C22.2 NO. 601.1-M90 07501/EN60601-1 (IEC601) EMC & LVD Operating temperature: 0°C to +40°C ambient. Derate each output as 2.5% per degree from 40° to 60°C. -20°C start up. Storage temperature: -40°C to +85°C Electromagnetic susceptability designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11, level 3 Humidity: Operating; non-condensing; 10% to 95% RH Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to 500 Hz, operational MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions 190 Technical Support: (888) 41ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 rev 06.14.05 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Model Number Maximum Output Power Voltage Maximum Peak Load Load1 Regulation2 Ripple P/P (PARD)3 DPS52-M DPS53-M DPS54-M DPS55-M DPS58-M 30W 60W 60W 60W 60W 6A 5A 4A 2.5A 1.25A ±2% ±2% ±2% ±2% ±2% 5V 12V 15V 24V 48V 6.5A 5.4A 4.3A 2.7A 1.35A DPS50 Series Ordering Information 50mV 120mV 150mV 240mV 480mV 2.39" (60.7) 1. Peak-to-peak with 20 MHz bandwidth and 10 µF tantalum capacitor in parallel with a 0.1 µF capacitor. 5.24" (133.0) INDICATOR LED 1.62" (41.0) DC OUTPUT CABLE AC INLET 78.7" (2000±15) MODEL LABEL NOTES: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02" ± (0.5mm) 3. Warranty: 1 year 4. Weight: 1.06 lb./ .48 kg 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115VAC input, 25°C unless otherwise stated www.astecpower.com 191