Embedded Power for Business-Critical Continuity Rev. 10.02.08_127 DPT50-M Series of 2 DPT50-M Series 50 Watts Total Power: Input Voltage: # of Outputs: 30 - 50 Watts 127 - 300 VDC 90 - 264 VAC Triple RoHS Electrical Specifications Special Features • Medical safety approvals • CE Mark EMC & LVD • Universal AC input • Fully regulated output • Overpower and short circuit protection • Constant voltage • High efficiency • High MTBF • IEC320 AC receptacle, 3 pin (type C14) • Built in EMI filter (CISPR 22 Class B) • LED power good indicator • Input power <74 watts • Complies with EN61000-3-2 Safety UL CSA VDE CE UL60601-1 CSA-C22.2 NO. 601.1-M90 07501/EN60601-1 (IEC601) EMC & LVD Input Input range Frequency Inrush current Efficiency EMI RFI Safety ground leakage current 90-264 VAC (wide range) 127-300 VDC 47-440 Hz <60 A peak @ 230 VAC, cold start @ 25°C 80% @ typical full load, @115VAC FCC Part 15, Subpart B Class B & EN55022 (CISPR22) Class B 275uA @ 50/60 Hz, 264 VAC input Output Maximum power 50 W (DPT51-M, 30W) Hold-up time 10 ms typical at full load @ 115VAC Overpower protection Output short circuit protection auto recover. Overpower protected @ 110 - 160% above maximum rating Overvoltage protection 20-45% above nominal output maximum Caable/2 meter DC cable with 5 pin Din connector Environmental Specifications Operating temperature: 0°C to +40°C ambient. Derate each output as 2.5% per degree from 40° to 60°C. -20°C start up. Storage temperature: -40°C to +85°C Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Vibration: MTBF demonstrated: Operating; non-condensing 10% to 95% RH IEC68-2-6 to the levels of IEC721-3-2 >550,000 hours at full load and 25°C ambient conditions Embedded Power for Business-Critical Continuity Americas Ordering Information Model Number DPT51-M DPT52-M DPT53-M DPT54-M Output Voltage +3.3V +5V +12V +5V +12V -12V +5V +15V -15V +5V +24V +12V Minimum Load 0.8A 0.1A 0A 0.5A 0.1A 0A 0.5A 0.1A 0A 0.5A 0.1A 0A Maximum Load Peak Load 1 Regulation 2 9A 3A 0.5A 8A 3A 0.5A 8A 2.4A 0.5A 8A 1.5A 0.5A 9A 4A 1A 9A 4A 1.0A 9A 3.2A 0.7A 9A 2A 0.7A Ripple P/P (PARD)3 ±4% ±6% ±5% ±2% ±5% ±5% ±2% ±5% ±5% ±2% ±7% ±5% 50 mV 50mV 120mV 50 mV 120mV 120mV 50 mV 150mV 150mV 50 mV 240mV 120mV 1. Peak current lasting <15 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Mechanical Drawing Rev. 10.02.08_127 DPT50-M Series of 2 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls NOTES: 1. Specifications subject to change without notice. 2. 3. 4. 5. 6. All dimensions in inches (mm), tolerance is ± 0.02” ± (0.5mm) Warranty: 2 year Weight: 1.44 lb./ 0.65 kg AC input power cord sold separately. Specifications are for convection rating at factory settings at 115VAC input, 25°C unless otherwise stated COM 5 V2 3 V1 2 Precision Cooling Racks & Integrated Cabinets 4 V3 PINOUT ARRANGEMENT 1V1 Shield COM Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co.